7 Best Ryobi Expand-It Trimmer Head | Stop Re-Spooling Mid-Yard

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You want a replacement head that screws onto your Ryobi straight-shaft trimmer and just works — not one that jams, throws line, or needs an arbor swap you did not plan for. That is the whole decision. The head you pick has to bolt up to the shaft you already own, hold 0.080-inch line under load, and keep feeding when you tap it on the grass. Everything else is noise.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

The list below splits bare replacement heads from full shaft attachments, because those are two very different purchases — and the fit rule that trips up most buyers is the straight-shaft-only arbor. Here is the honest read on the ryobi expand-it trimmer head options that actually fit.

Top Picks

314608005 Reel Easy+ Bump Feed Trimmer Head Compatible with Ryobi
Best Overall314608005 Reel Easy+ Trimmer Head4.5+★70+ ratingsA bare Reel Easy+ head that drops onto straight-shaft Ryobis built after 2004 with no fuss at all. If your trimmer already has a straight metal shaft running down to the cutting head, this is the lowest-risk swap on the list.Check price on Amazon
314608005 Weed Wacker Replacement Head for Ryobi Reel Easy+ Bump Feed Trimmer Head Straight Shaft RY15526 RY15527 RY15529
Best Kit Value314608005 Weed Wacker Replacement Head4.0+★40+ ratingsThe same 314608005 head, boxed as a 12-piece set so you are not short a fitting halfway through. This one leads with the kit.Check price on Amazon

How To Choose The Best Ryobi Expand-It Trimmer Head

The first thing to settle is what you are actually replacing. A bare bump-feed head is the spinning part that holds the line, and it threads onto a shaft you already own. A full Expand-It attachment is the whole lower half of the trimmer — shaft, head and all — which clicks into a Ryobi power head you already have. Buying the wrong one of those two is the most common and most expensive mistake in this category.

Straight shaft versus curved shaft is the deal-breaker

The bare replacement heads on this list are built for straight-shaft trimmers made after 2004. A curved-shaft trimmer takes a different head entirely, and it will not accept these. Check the shaft on your machine before you order anything — a straight metal tube running down to the cutting head means you are in the right pool. Some trimmers also need the old arbor removed before a new Reel Easy+ head will sit flush, so read the fitment note on the listing you pick.

Line size and cutting swath set your real speed

Every attachment here runs 0.080-inch line, the standard diameter for light residential edging and fence-line work. Cutting swath is the width of the circle the line sweeps, and it decides how many passes you make. A 13-inch swath is fine for tight borders, while an 18-inch swath clears a wide lawn edge in fewer walks. Match the swath to the kind of trimming you actually do, not to the biggest number on the page.

What the Reel-Easy spooling tool changes

Respolling a bump head by hand is the job everyone dreads — line slipping off the spool, the spring popping, twenty minutes gone. The Reel-Easy winder tool lets you load new line onto the spool in a controlled way instead of wrestling it. If you respool often, that tool turns a foul-mouthed afternoon into a five-minute job.

Side-by-Side Comparison

Model Best For Type Cutting Width Line Size Amazon
314608005 Reel Easy+ Bump Feed Trimmer Head (XQK)★ Best Overall Straight-shaft owners who just need a fresh head Bare bump-feed head — — Amazon
314608005 Weed Wacker Replacement Head (WONEHI)Best Kit Value Buyers who want a full 12-piece fitting kit Bare bump-feed head + kit — — Amazon
Reel Easy+ Bump Feed Head (GENGIRL) Anyone whose trimmer needs the arbor pulled first Bare bump-feed head + crank — — Amazon
2PC Trimmer Replacement 313318001 Head (Lxamivxla) Two-head backup for gas and 4-cycle machines Bare bump-feed head (2-pack) — — Amazon
Ryobi RY15526VNM Expand-It Straight Shaft Attachment One purchase that covers three head styles Full Expand-It shaft attachment 15 in — Amazon
RYOBI Expand-It 18 in. Straight Shaft Attachment with Reel-Easy Winder Wide lawns and lots of respooling Full Expand-It shaft attachment 18 in 0.080 in Amazon

Detailed Reviews

★ Best Overall

1. 314608005 Reel Easy+ Trimmer Head

Our pick — 4.5+★ from 70+ verified ratings; the strongest balance of quality and price.

Reel Easy+ Bump FeedStraight Shaft Fit

A bare Reel Easy+ head that drops onto straight-shaft Ryobis built after 2004 with no fuss at all.

If your trimmer already has a straight metal shaft running down to the cutting head, this is the lowest-risk swap on the list. It is a direct 314608005 replacement, which is the Reel Easy+ bump-feed head Ryobi fits to a long line of its straight-shaft attachments. You get the head, you get the hardware it needs to bolt on, and you get a bump feed that pays out line when you tap it on the ground. No power head, no shaft, no extra parts to sort.

The thing that wins people over here is simple reliability — it works, and it matches what the listing shows. Installation earns its share of the credit too, since the head arrives ready to fit straight-shaft machines built after 2004. It does not fit curved-shaft trimmers, so that is the one check to make before you order. If you are already holding a straight shaft, you are fine.

One honest note on the spec sheet: the listed dimensions read 1 x 1 x 1 inches, which is a placeholder rather than a real measurement, so do not plan your fit around that number. Plan it around your shaft type instead. It ships pre-spooled with an extra-long run of trimmer line, so you can cut the same afternoon it arrives.

What lands well

  • Direct 314608005 Reel Easy+ replacement — matches the head Ryobi fits to straight-shaft attachments
  • Bump feed pays out line with a tap, so you keep walking instead of stopping to pull line
  • Arrives with hardware to fit straight-shaft trimmers built after 2004
  • Comes spooled with an extra-long run of trimmer line

Where it asks you to check first

  • Will not fit curved-shaft trimmers — straight shaft only
  • Listed dimensions are a 1 x 1 x 1 placeholder, so gauge fit by shaft type, not by that number

Straight-shaft owners, start here: the simplest like-for-like head replacement if your trimmer already has the right shaft.

Check your machine: a curved-shaft trimmer needs a different head, and this one will not seat on it.

Best Kit Value

2. 314608005 Weed Wacker Replacement Head

12-Piece KitOEM-Style Replacement

The same 314608005 head, boxed as a 12-piece set so you are not short a fitting halfway through.

This one leads with the kit. Where the top pick gives you the head and its hardware, this ships a 12-piece trimmer attachment set with instructions. For a first-time head swap — or for anyone whose old hardware has wandered off into the garage — that instruction sheet plus a full spread of fittings is the difference between a clean install and a second trip to the store.

The compatibility list is unusually long, and it covers the machines most people actually own. It fits straight-shaft Ryobi trimmers made after 2004, and the maker lists 18V models P2009, P2090, P2009BTL, P20101, P20110, P20101BTL, P20220, P20190 and P20019BTL. On the 40V side it names RY40202, RY40220, RY40202BTL, RY40205, RY40250, RY40205BTL, RY40203, RY40230, RY40203BTL, RY40207, RY40270, RY40207BTL, RY40209, RY40209BTL, RY40290, RY402011, RY402011BTL and RY202110. AC models RY41135 and RY41131 are on it as well, along with the RYACSS, RY253SS, RY15526, RY15527 and RY15529 attachments.

The maker calls it an OEM replacement more durable than the original — a claim to take as the maker’s word, not a lab result. The listing also notes it is compatible with Expand-It curved and straight shaft attachments, which is broader than the straight-shaft-only rule on the top pick.

Where it fits: the long model list plus a 12-piece kit with instructions makes this the friendlier buy for a first swap or a machine whose exact model number you had to look up.

The honest read: the durability line is the manufacturer’s claim, not a measured figure, so judge it on how the head seats and bumps rather than on the wording.

Best for the first-timer: buy this if you want instructions and a full fitting kit in the box with your Reel Easy+ head.

Look elsewhere if: you already know your shaft is straight and you only need the bare head.

Easiest Install

3. Reel Easy+ Trimmer Head RY15526

Includes CrankArborless Design

An arborless Reel Easy+ head that comes with the crank — the fix for a stubborn shaft.

Here is where this one beats the top pick on a specific point: it ships with a crank. Some trimmers need the old arbor taken off before a new head will sit down properly, and that job is miserable without the right tool. This head is the new arborless Reel Easy+ design, it includes the crank, and it arrives pre-installed with hardware for straight-shaft trimmers. Nothing else is in the box — no spare accessories — but the piece that actually matters for a tricky install is.

Fitment is the same 314608005 replacement part number as the head at the top of this list, and it matches straight-shaft Ryobi trimmers built after 2004. The maker also lists the models Ryobi ships this head on from the factory: RY15526 and RY15526VNM in both their trimmer-head accessory and straight-shaft forms, plus RY15527, RY15527VNM and RY15529VNM Expand-It straight-shaft attachments. It is also the same head as part number AC053N1BFH, which is useful if your manual points at that number instead.

Picking between this and the Best Overall is mostly about the hardware. The two look near-identical on paper, and both are the same replacement part, but this one hands you the crank and skips the extras. If your trimmer came apart easily last time, you will not notice the difference. If it did not, you will.

Standout detail: the included crank is what separates it — useful when the old arbor has to come off before the new head goes on.

One thing to know: the box holds the head and hardware, nothing more, so do not count on spare fittings.

Reach for this if: your trimmer has been stubborn about head swaps and you want the arbor tool in hand.

Not your pick if: your shaft takes a new head easily and you would rather have a spare-line bundle.

Two-Head Backup

4. 2PC 313318001 Trimmer Head

2-PackGas and 4-Cycle Fit

Two heads in one box, aimed squarely at gas and 4-cycle Ryobi machines the others miss.

The pitch here is coverage you will not find on the Reel Easy+ heads above. This 2-pack steps into gas territory, listing 4-cycle models RY4CSS, RY4CSSVNM, RY34440 and the S430, plus 2-cycle SS30 machines RY253SS and RY253SSVNM. It also names 18V ONE+ trimmers P2009, P20220, P20220VNM, P20110, P20110VNM, P20101BTL and P20101BTLVNM, along with the RY15523A, RY15523AVNM, RY15526, RY15526VNM, RYSST44, Rysst44vnm, RY40ST01, RY15527 and RY15529 straight-shaft attachments.

The 40V side is covered too, from RY40250 and RY40290 to RY40205, RY40205BTL, RY40205BTL-2X, RY40270VNM, RY402011 and RY402011BTL, plus AC trimmers RY41135 and RY41131. Replacement part numbers on the listing run 313318001, 311759008, 311759004, 311759014 and AC04156, and the head is built as a 314608005 Reel Easy+ Bump Feed equivalent. That breadth is the whole reason to pick it — if your machine is not on the shorter model lists elsewhere, it is probably on this one.

What gets mentioned most often is function — the heads work, and they seat correctly. Quality draws a more divided reaction, so treat this as a working spare rather than a forever part, and the two-pack makes sense precisely because you get a second head in the box.

Why the 2-pack earns its place

  • Two heads in one box, so you have a spare when the first wears out
  • Reaches gas and 4-cycle models — S430, RY4CSS, RY4CSSVNM and RY34440 — that narrower heads skip
  • Covers 18V, 40V and AC trimmers on one listing
  • Function and fit are what buyers single out most

The honest caveats

  • Quality feedback splits both ways, so expect a serviceable head rather than a premium one
  • Every fit is still straight-shaft only

Made for gas owners: the pick if your machine is a 4-cycle or 2-cycle Ryobi and the other heads do not list it.

Trade-off to accept: quality is a coin flip by owner accounts, so the second head in the box is the real insurance.

Triple-Head Set

5. Ryobi RY15526VNM Trimmer Attachment

Three Head StylesSpeed Winder

One shaft that arrives with three different heads, including a bladed and a dual-line option.

Three heads in a single purchase is the reason to look here. This attachment includes a bladed head, a dual-line head and a bump-feed line head, so you can switch cutting style to the job instead of switching tools. A 15-inch cutting width keeps it in the same class as the adjustable Ryobi attachment above, and the straight-shaft shape gives you the same reach for edging and fence work. It runs on a Ryobi power head, which is not included — and neither is a battery or charger.

Function is what carries it. It works, and it is a clean replacement for the trimmer shaft on a Ryobi power head you already own. Performance gets solid marks too, which lines up with a 15-inch swath doing normal residential work. The speed winder on the head saves you the hand-spooling punishment when the line runs out.

The catch sits in the box, not in the cutting. The included accessories draw a divided reaction — a fair number of buyers expected three heads and the precut dual line and did not find the full set they pictured. Ease of use splits similarly. So read the included-parts list carefully and buy it for the shaft and the head style you will actually use, not for an assumed accessory bundle.

The honest catch: the accessory bundle is the most divisive part of this attachment — check what is actually in the box before you count on all three heads.

Still worth it for: a 15-inch straight shaft that slots onto your existing power head and gives you bladed, dual-line and bump-feed options.

Best for the multi-job owner: if you want one shaft that handles edging, light brush and standard trimming, this is the flexible pick.

Read the parts list first: the accessory bundle is where the disappointment lives, so buy it for the shaft.

Widest Swath

6. Ryobi Expand-It 18 in. Trimmer Attachment

18 in Cutting SwathReel-Easy Winder

The widest cut here, paired with the winder tool that ends hand-spooling misery.

Cover ground faster: this attachment sweeps an 18-inch cutting swath, versus 15 inches on the Ryobi RY15523A and RY15526VNM. It runs the same 0.080-inch line as the rest of the Ryobi attachments here, and the straight shaft gives you reach along fences and around obstacles.

The second half of the pitch is the REEL-EASY spooling tool. It loads new line onto the spool in a controlled way instead of the usual hand-wrestle, which is the task that eats a whole afternoon when line snaps mid-job. Quality is what buyers single out most on this attachment, and function follows close behind — it installs cleanly and cuts as expected. At 3.3 pounds it is not a heavyweight to hang on the end of your power head.

The thing to watch is fit. Feedback on whether it mates to every Ryobi power head is not unanimous, so confirm your power head model before you order. The power head itself is not in the box — this is the lower half of the trimmer only. Once you confirm the fit, the 18-inch swath and winder make short work of a large lawn.

The headline: an 18-inch swath is the widest on this list, and the Reel-Easy winder removes the worst chore in trimmer ownership.

Confirm before you buy: check that your Ryobi power head is on the fit list, because fit is where opinions divide.

Pick it for a big lawn: an 18-inch swath and a winder tool cut your clearing time and your respooling grief.

Hold off if: your power head model is uncertain — verify the fit before ordering.

Know the Specs

Cutting Swath (13, 15, 18 in.)

Cutting swath is the width of the circle the spinning line sweeps. A wider swath clears more grass per pass, which matters on long lawn edges. A narrower swath, like the 13-inch setting on the adjustable RY15523A, fits tighter borders without scalping the fence line. Pick the swath that matches your yard, not the biggest number you can find.

Line Diameter (0.080 in.)

Line diameter is how thick the trimmer string is. Every attachment here runs 0.080-inch line, the standard weight for light residential edging and fence-line trimming. Thicker line is tougher but loads up the motor, so 0.080 is the balance most home trimmers are built around. Stick to that size and the bump feed will handle it as designed.

Reel Easy+ Bump Feed

Bump feed means you tap the head on the ground and it releases more line as it spins. Reel Easy+ is Ryobi’s name for the head design that reels the line back onto the spool between feeds. The result is less stopping to pull line by hand mid-job. When the line finally runs out, a spooling tool like the Reel-Easy winder makes the reload a controlled job instead of a fight.

Straight Shaft vs. Curved Shaft

A straight-shaft trimmer has a straight metal tube running down to the cutting head. A curved-shaft trimmer bends the tube instead. The bare heads on this list are built for straight-shaft machines made after 2004 and will not seat on a curved-shaft trimmer. Some straight-shaft machines also need the old arbor removed before a new head fits flush — that is why the crank-included head earns its place.

Common Questions

Will a Reel Easy+ head fit my curved-shaft Ryobi trimmer?
No. The replacement heads here are built for straight-shaft Ryobi trimmers made after 2004. A curved-shaft trimmer takes a different head and the Reel Easy+ parts will not seat on it. Check whether the metal tube running to your cutting head is straight before you order.
Do I need the arbor removed to install a new trimmer head?
Sometimes, yes. On some straight-shaft trimmers the old arbor has to come off before a new head sits flush. That is the case where the head that comes with a crank is the easier buy — you have the tool for the job in the box. If your machine takes a new head without that step, you will not need it.
What is the difference between a bare trimmer head and a full Expand-It attachment?
A bare head is just the spinning part that holds the line, and it threads onto a shaft you already own. A full Expand-It attachment is the entire lower half of the trimmer — shaft and head — and it clicks into a Ryobi power head. Buying the wrong one is the most expensive mistake in this category, so decide which half you actually need replacing.
Does the Ryobi RY15523A attachment include the power head?
No. It is the attachment only — the lower half of the trimmer. You need a Ryobi Expand-It power head, which is the motor and handle half, sold separately. If you do not already own a power head, this attachment alone will not run.
What size trimmer line do these attachments use?
The Ryobi attachments here — the RY15523A, the RY15526VNM and the 18-inch attachment — all run 0.080-inch line. Stick to that diameter and the bump feed will pay it out as designed. Going thicker loads up the motor, and going thinner wears through faster.
Why does the listing for the bare Reel Easy+ head show 1 x 1 x 1 inches?
That is a placeholder in the listing data, not a real measurement. Do not plan your fit around it. Gauge fit by shaft type instead — a straight-shaft trimmer made after 2004 is the machine these heads are built for.
Can I use a Reel Easy+ bump head on a gas or 4-cycle Ryobi trimmer?
Some listings cover gas and 4-cycle machines specifically. The 2-pack head names the S430, RY4CSS, RY4CSSVNM and RY34440 on its fit list, plus 2-cycle SS30 models RY253SS and RY253SSVNM. Check your exact model number against the listing before you buy, because the fit lists differ between heads.
Do I need a spooling tool to reload my trimmer line?
Not strictly, but it saves real time. Hand-spooling a bump head is the chore most owners dread — line slips, the spring pops, and the job runs long. The Reel-Easy winder tool that ships with the 18-inch attachment loads line in a controlled way instead. If you respool often, the winder turns a twenty-minute fight into a five-minute job.
What does the 314608005 part number tell me?
It is the Ryobi replacement number for the Reel Easy+ bump-feed head. Several heads on this list carry it, which means they are direct replacements for the same factory part. If your manual points at 314608005 or AC053N1BFH, a head carrying those numbers is the like-for-like swap.
Is the RY15526VNM attachment the same as a bare head purchase?
No, they are different purchases. The RY15526VNM is a full straight-shaft attachment with a 15-inch cutting width, and it includes a bladed head, a dual-line head and a bump-feed head. A bare head is just the spinning part. The attachment also does not include a battery or charger, and it needs a Ryobi power head to run.

The Bottom Line

The safest buy for most people is the 314608005 Reel Easy+ Bump Feed Trimmer Head, because it is a direct replacement for the factory part on straight-shaft Ryobis built after 2004 — and and 4.5+ stars across 70+ owners back that up, confirming it installs and works as described. If you want instructions and a full 12-piece fitting kit in the box, grab the WONEHI 314608005 kit. And if your old arbor has been the sticking point, the GENGIRL Reel Easy+ head with crank is the one to reach for.

For the whole-shaft route, the RYOBI 18 in. attachment with Reel-Easy winder is the pick if you want the widest swath and a tool that ends hand-spooling. Confirm your power head fits before you order that one — fit is where the feedback splits. Whichever way you go, match the head to your shaft type first — straight or curved — and the rest follows.

If you are waffling, take the nudge: a bare Reel Easy+ head is a low-cost part with a strong track record, and the fit rule is simple enough to check in ten seconds on your own machine.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top