Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your ice maker quit and there is a slow puddle under the fridge — and the part that usually causes both is a small water inlet valve behind the bottom kick plate. This guide covers nine replacement valves, sorted by which fridge brand and model they actually fit, so you buy the right one once. The short answer: match the part number on your old valve first, then pick your price tier.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every valve here is a direct-fit replacement, so the deciding factors are connector type, port count, and how many minutes the swap takes. Here is the plain-English breakdown of the best refrigerator water valve for each common fridge brand.
Top Picks



How To Choose The Best Refrigerator Water Valve
A refrigerator water inlet valve is the small electric gate that opens to let household water flow into your ice maker and dispenser. When it fails, you get one of three symptoms: no ice, weak water pressure at the dispenser, or a slow leak that pools under the fridge. Picking the right replacement is a matching job, not a shopping job — get the part number right and the rest follows.
Start with the part number, not the brand
You can find the right valve in minutes if you start with the old part number. Pull your fridge out, remove the lower back or kick panel, and photograph the label on the old valve. That number — something like WR57X10032 or W10394076 — is what you search. Two fridges from the same brand can use completely different valves, so the model name on the door tells you very little. Every listing in this guide names the part numbers it replaces, so you can cross-check in seconds.
Count your ports and check your connectors
A dual-port valve feeds the ice maker and the water dispenser on separate internal solenoids (electrically driven plungers), so each line gets steady pressure. A single-port valve feeds one line only. Connector style matters just as much — compression fittings, threaded inlets, and quick-connect push-in fittings are not interchangeable. Measure the inner diameter of your water line and compare it to the listing before you order.
Know your realistic install time
Most of these valves swap in under half an hour with a screwdriver, a wrench, and the water supply shut off. Job difficulty climbs when the valve sits behind a tight panel or the old fittings have seized. If your manual rates the repair for an experienced DIYer, budget extra time and have a towel down.
Side-by-Side Comparison
| Model | Best For | Ports | Connector Type | Compatible Brands | Amazon |
|---|---|---|---|---|---|
| LG Electronics AJU72992601★ Best Overall | LG fridge owners who want the factory part | — | Threaded, Compression | LG | Amazon |
| REE.PLAR W10238100Best Value | Whirlpool and Kitchen-Aid side-by-sides | — | Compression | Whirlpool, Maytag, Kenmore, Kitchen-Aid, Jenn-Air, Ikea | Amazon |
| Romalon WR57X10032Top Performer | GE and Hotpoint side-by-sides | 2 | Threaded | GE, Hotpoint, Kenmore | Amazon |
| REE.PLAR W10394076 | Older Whirlpool models | 1 | Female Iron Pipe | Whirlpool, Kenmore, Jenn-Air, Kitchen-Aid, Maytag | Amazon |
| Appliancemate MJX41178908 | LG and Kenmore French-door fridges | — | Threaded | LG, Kenmore | Amazon |
| Parts Master WR57X33326 | GE built-in and column refrigerators | — | Flanged | GE | Amazon |
| BlueStars WR57X10051 | GE, Hotpoint, and Kenmore budget fixes | — | Compression | GE, Hotpoint, Kenmore, RCA | Amazon |
| Robertshaw IMV708 | Whirlpool and Kitchenaid three-line setups | 3 | G Connector, Threaded | Whirlpool, Kitchenaid, Kenmore | Amazon |
| Frigidaire 242252702 | Frigidaire Gallery bottom freezers | — | Waterproof | Frigidaire | Amazon |
Detailed Reviews
1. LG Electronics AJU72992601 Refrigerator Water Inlet Valve
Our pick — 4.5+★ from 550+ verified ratings; the strongest balance of quality and price.
The one that ends the guessing game — a factory LG part carrying the exact number your fridge was built around.
For LG owners, this is the straightest path from a dead ice maker back to a full bin. It is part number AJU72992601, made by LG Electronics, in stainless steel, with a threaded and compression connector setup. Because it carries the factory number your appliance was assembled with, the fit is decided by the label on your old valve rather than by hope.
Installation is the part that wins people over. The job is a genuine bolt-off, bolt-on swap — disconnect the supply, unthread the old body, seat the new one, reconnect. What owners keep coming back to is how the whole thing goes back together without massaging brackets or freeing up seized fittings, and the going estimate is about 10-15 minutes with basic hand tools. It brings back the water dispenser and the ice maker together, since both lines run through this valve.
The honest trade-off is longevity. Some owners have had a replacement stop working after a couple of years, which is the one thing to weigh against buying genuine. It is also the bulkiest valve here — the 18 x 10 x 6 inch body leaves far more room around it than the 3.94 x 3.1 x 4.7 inch aftermarket LG-compatible unit, so double-check panel clearance before you commit. Owners put it plainly: it “works well, fixing both the water dispenser and ice maker.”
Why LG Owners Stay With It
- Factory LG Electronics part number AJU72992601, so fitment follows your own label
- Stainless steel body with threaded and compression connections
- Refreshes the ice maker and dispenser together in about 10-15 minutes of work
- LG’s 30-day returns and 90-day defective returns policy apply
What To Weigh Before Ordering
- Some replacements have quit inside a couple of years, so durability is a real question
- The 18 x 10 x 6 inch body is far larger than the compact aftermarket alternative
- You must confirm the part number in your manual — LG builds several valve variants
Go factory if: you own an LG and want the number on the box to match the number on the fridge.
Think twice if: space behind the kick panel is tight — measure before you pull the trigger.
2. W10238100 Refrigerator Water Inlet Valve
One part number, a dozen fridge brands — the widest net a single valve casts in this lineup.
If your fridge door says Whirlpool, Maytag, Kenmore, Kitchen-Aid, Jenn-Air, or Ikea, this valve is worth checking against your old part number first. It replaces W10238100, WPW10238100, w11512399, IMV-8100, K-77473, W10498992, and a long cross-reference list, so the odds of a match are unusually high. It runs on a rated 20W at 60Hz and 120V, with 1/4 inch terminals and a 1/4 inch ID threaded outlet.
What owners notice is how cleanly it drops in when the number lines up. It is a compression-connector valve with a 5/16 inch ID quick-connect push-in inlet (you push the water line in until it seats), and the whole job is often done in about fifteen minutes. It restores dispenser water flow without touching any other component.
The catch is the plastic exterior and the leak question. Some installs seal dry and stay dry; others have had water weeping at the fittings, so take your time seating the connections and check for drips before you push the fridge back. The maker’s one-year warranty covers that leak risk. And unlike the Romalon valve, which offers two ports to run the ice maker and dispenser on separate solenoids, this one is built for the single-line setup its part numbers cover.
Fitment is the whole pitch here: the sheer number of Whirlpool-family part numbers it replaces makes it the easy first look for that brand group, and owners repeatedly describe a snug, exact drop-in with quick-connect plumbing that takes minutes.
Where it asks for care: the plastic housing and the mixed leak reports mean you should pressure-check the fittings before closing up — a five-minute extra step that heads off a callback.
Reach for this if: your valve label starts with W10238100 or one of its cross-references.
Look elsewhere if: your fridge needs separate solenoids for ice and water — that is a two-port job.
3. WR57X10032 Refrigerator Dual Solenoid Water Inlet Valve
Two solenoids doing separate jobs — ice maker on one, cold water on the other, no pressure tug-of-war.
This is the valve to check if your GE, Hotpoint, or Kenmore side-by-side is starving one function while the other works fine. It is a WR57X10032 replacement with 2 ports and two independent solenoids, one for the ice maker and one for the cold water outlet. That split design is what keeps pressure steady at the dispenser instead of sagging every time the ice maker refills.
The installation is built for a Saturday morning, not a service call. The electrical terminals are color-coded red and blue so they can only go one way, and the mounting bracket arrives already attached. You need a screwdriver and a wrench, and the maker says the full swap finishes within 15 minutes. The body is corrosion-resistant engineering plastic on a solid metal mounting frame, and each unit is pressure-tested before it ships.
The thing that earns trust here is reliability — that is the quality owners talk about most, and the story of bringing a 16-year-old GE back to life sums up the appeal. The trade-off is fitment scope: this exact part number covers GE, Hotpoint, and Kenmore side-by-sides, and nothing outside that family. Compare it to the two-port WR57X33326 below only if your manual points you there instead.
The seal upgrade is the quiet win: reinforced thicker rubber gaskets are aimed squarely at the dripping and slow-water complaints that send people valve shopping in the first place.
The single caveat: buy strictly by part number — WR57X33326 and WR57X10032 are not the same valve, and the bracket shapes differ.
Your match if: you want separate pressure control for ice and water on a GE-family side-by-side.
Not your match if: your old valve has only one port — you would be plumbing lines you do not have.
4. W10394076 Refrigerator Water Inlet Valve
Built for the fridge that has been humming in your kitchen since before the smart-home era.
Whirlpool-designed refrigerators that have been in service for a decade or more are where this valve does its best work. It replaces W10394076, W10865826, W10872966, WPW10394076, K-78282, W10726788, and W10833705, and it covers Whirlpool, Kenmore, Jenn-Air, Kitchen-Aid, and Maytag. It is a single-port design — that is the key difference from the two-port Romalon above — with a 1/4 inch ID threaded outlet.
Electrically it is rated at 110/120V, 50/60Hz, 20W, with 1/4 inch terminals and a 5/16 inch ID quick-connect push-in inlet. The housing is metal with a stainless steel exterior finish, so it feels like a part rather than a piece of molding. Owners describe pulling a tired valve, seating this one against OEM-spec dimensions, and getting steady water and ice back in one session.
Now the honest part. The push-in inlet has a specific inner diameter requirement, and getting it wrong is where leaks start — so measure the water line before you order rather than after. Some installs have stayed dry from day one; a few have not sealed immediately at first attempt. The upside is that a careful fit is very likely to end the leak that prompted the purchase.
The strongest signal: a steady, consistent flow restored to both the dispenser and the ice maker, on appliances that had been slowly losing pressure.
The one thing to get right: the 1/4 inch threaded outlet and 5/16 inch push-in inlet measurements — a mismatch there is the common source of frustration, not the valve body.
Match this one if: your manual lists W10394076 or W10865826 and you have a single-line feed.
Hold off if: you have not measured the inlet line — get the calipers out first.
5. MJX41178908 Refrigerator Water Valve Replacement for LG
Twelve inches of clearance saved — the small-body answer for LG French doors tucked against a wall.
This is the alternative for LG and Kenmore owners whose valve bay is too cramped for the full-size factory part. Its body measures 3.94 x 3.1 x 4.7 inches against the 18 x 10 x 6 inch LG factory unit — a 4.6x gap in overall volume, which matters when you are working blind behind a kick plate with your shoulder against a cabinet.
It handles the classic failure symptoms: a fridge that will not drain properly, runs noisy, leaks, or an ice maker that has packed it in. The electrical layout is a little unusual — one coil takes 3/16 inch terminals, the other takes 1/4 inch terminals — so keep track of which lead came off which side. A screwdriver and an adjustable wrench are the whole tool list, and the maker asks that you cut the power and wear gloves before you start.
The value story is the strongest part. Owners routinely trade a service-call invoice for a DIY afternoon, and the water flow and ice production come back to full. The recurring caution is patience on the swap: rush the terminal fitting or cross the leads and you will be diagnosing a fresh fault on top of the old one. What people report most is simple functionality — the valve does its job and restores what the fridge was built to do.
What This Small Body Buys You
- Compact 3.94 x 3.1 x 4.7 inch footprint fits bays a factory valve cannot
- Handles no-drain, noisy, leaking, and no-ice symptoms in one part
- Replaces 1398828, AP4451762, PS3536019, PD00005215, and more
- Basic screwdriver-and-wrench job for confident DIYers
Where It Wants Patience
- Two different terminal sizes — 3/16 inch on one coil, 1/4 inch on the other — reward careful labeling
- You must kill the power and wear gloves, per the maker’s instructions
- Fit is limited to LG and Kenmore models listed on the part page
Take the small one if: clearance behind your LG or Kenmore is the deciding problem.
Skip the cramped job if: you cannot see the terminals clearly — mislabelled leads turn a repair into a puzzle.
6. WR57X33326 Refrigerator Water Valve
The guarded one — a stainless flanged valve aimed at GE built-ins where a bare body is a liability.
GE column and built-in refrigerators take a different valve than the freestanding side-by-sides, and this is the WR57X33326 replacement built for them. The flange-and-guard layout covers ZIR-series models including ZIR241NBRAII, ZIR301NPNAII, and ZIR361NPRCII. It weighs 8.96 ounces, so it is substantial in the hand, and the stainless steel body sits behind a guard that shields the coil area.
Buyers report water moving through the dispenser and ice maker at the pressure the fridge expects. The install is rated a simple DIY job with ordinary hand tools, and it slots into the same space the failed valve came out of. The flange-mounted connector type is note, since it differs from the compression fittings on most valves here.
Durability is the honest caveat. The valve has a mixed record on lifespan, and a few units have arrived with a bent frame — inspect the guard and body on arrival before you start the job. Set that against a strong performance record on the function itself, and it remains the right call for a GE built-in that no other valve on this list fits.
The reason to choose it: genuine coverage of GE built-in and column refrigerators that freestanding-air valves simply do not fit.
The reason to inspect the box: the guard and frame can arrive out of shape, so unbox and check before you shut off the water.
Right choice for: a GE ZIR-series built-in showing weak dispensing or a dead ice maker.
Wrong choice for: a standard freestanding GE — the flanged body will not mount the same way.
7. WR57X10051 Refrigerator Dual Inlet Water Valve
Push, click, done — quick-connect fittings that take the wrench work out of a valve swap.
The BlueStars WR57X10051 is the one to shortlist if your GE, Hotpoint, Kenmore, or RCA fridge has a WR57-family valve and you want the easiest physical install. It uses a 0.25 inch compression inlet and quick-connect outlets — you push the water lines in until they seat and skip the threading entirely. The maker’s four-step process is unplug, shut off the water, swap, and restore power, with a 15-20 minute window.
Inside, two independent solenoids feed the ice maker and dispenser on separate circuits, so each gets consistent pressure. The housing is high-grade ABS plastic with reinforced steel mounting brackets. The 4.9 x 3.9 x 3.9 inch body is a compact rectangle, and the maker backs it with a 2 year warranty plus lifetime protection against defects.
Functionality is what owners talk about most — the ice maker starts again and the dispenser pours at the rate it should. What to watch is the connector fit: quick-connect fittings are unforgiving of a line that is cut square or pushed in only part way, and the leak complaints cluster right there. Durability also draws mixed feedback over time. If your connectors are clean and square, this is the fastest path to a working fridge on this list.
Why The Install Wins
- Quick-connect outlets remove threading from the job entirely
- Dual solenoids keep ice and water pressure independent
- 2-year warranty plus lifetime defect protection
- Fits GE, Hotpoint, Kenmore, and RCA models on the compatibility list
What To Watch Closely
- Quick-connect fittings leak if the line is not cut square or fully seated
- Long-term durability gets mixed feedback, so treat it as a mid-term fix
- No conversion terminals included — buy separately if your fridge needs them
Best for: a first-timer who wants the plumbing simplified to a push-in.
Not for: a fridge whose old valve has non-matching terminal sizes — you will need the adapters.
8. IMV708 Refrigerator Water Valve
Three ports for the fridges that feed ice, water, and a third line all from one body.
Among the whole set, this is the only valve with 3 ports — where the two-port Romalon WR57X10032 splits flow between an ice maker and a dispenser, this one adds a third outlet, with a 0.25 inch G-connector outlet feeding its own line. It is the IMV708 by Robertshaw, a name that has been making appliance control parts for a long time, and the chrome-finished metal body has the heft you would expect from an OEM part.
It is a direct match, not a close one. Owners of Whirlpool, Kitchenaid, and Kenmore refrigerators describe opening the box, comparing the replacement against the original, and finding the terminals and mounting identical. The swap typically takes about ten minutes for the confident DIYer. It handles W10408179 and 4389177 cross-references, so confirm against your manual if you are unsure which of the three numbers your old valve carries.
Two caveats. The drip issue is not fully solved for every install — some valves seal clean, while a few leave a slow drip at the dispenser. And this is a three-line part: if your fridge has one water feed and one ice line, a two-port valve covers you the same way for less complexity. Owner reports put its service life at up to about 18 months.
Its real edge: three outlets in one part — the only option here that covers fridges needing a third water line.
The honest limit: not every install drips clean, so run a leak check at the dispenser before you walk away.
Matches up if: your fridge has three water connections and takes the IMV708.
Overkill if: your old valve had two lines — pick the two-port Romalon instead.
9. Frigidaire 242252702 Water Inlet Valve for Refrigerators
Designed by the same company that built your fridge — the safest bet for a Gallery bottom freezer.
Frigidaire’s own 242252702 is designed and engineered to the specs of the appliance it goes into, which is the strongest fit assurance you can get. It is a 16-ounce all-metal body with a 0.5 inch waterproof inlet. If your fridge is a Frigidaire Gallery bottom freezer, the fit reports are almost universally clean, and that is exactly why people pay for genuine.
The tool list is short but specific: a 1/4 inch nut driver, an adjustable wrench, gloves, and safety glasses. Frigidaire rates the repair for a confident DIYer, not a beginner, because the valve sits in a tight spot and the inlet needs a firm seat. Done right, owners have described the whole swap taking about five minutes.
Where it earns its place is in the water it stops. Some fridges that were dumping water at the dispenser have come back to dry after this valve goes in, which is the actual outcome people are buying. Conversely, a few installs have still leaked at the dispenser — check the inlet seal and the connector torque before you reconnect the supply. Compared with the two-port Romalon above, this is a single-inlet design for Frigidaire’s own plumbing layout, not a dual solenoid.
What the brand name buys: a part engineered to Frigidaire’s own dimensions, with the fit that comes from matching by design rather than by cross-reference.
The trade-off: a five-minute job for a practiced hand, and no shortcut if your Frigidaire plumbing has changed — measure and confirm against the manual every time.
The right part if: your manual names 242252702 for a Frigidaire Gallery bottom-freezer.
Not the right part if: you are still guessing the number — verify it in the manual before you shut off the water.
Know the Specs
Port count and solenoid design
A port is a water exit. A single-port valve feeds one function. A two-port dual solenoid valve runs the ice maker and the water dispenser on separate electrically driven plungers, so opening one does not starve the other. The Romalon WR57X10032 and the BlueStars WR57X10051 both use dual solenoids; the Robertshaw IMV708 has three ports. If your fridge has three water lines, a two-port valve cannot cover it — count your lines before ordering.
Connector type and inner diameter
This is the most common source of returns. Compression fittings grip the line when tightened and need the stated inner diameter. Threaded inlets must match thread pitch. Quick-connect push-in fittings, like the 5/16 inch ID inlet on the REE.PLAR W10394076, need a square-cut line pushed fully home. A 1/4 inch outlet is not the same as a 1/4 inch inlet. Measure your old valve’s connections with calipers and compare to the listing, not your memory.
Voltage and electrical rating
These valves run on household power — the REE.PLAR W10238100 and REE.PLAR W10394076 are both rated at 20W at 50/60Hz and 110/120V, with 1/4 inch terminals. That rating is standard for this part type, so electricity is rarely the failure point. The terminals are what matter: if one coil takes a 3/16 inch lead and another takes a 1/4 inch lead, as on the MJX41178908, label each wire before you pull it.
Leak prevention and materials
Stainless steel and metal bodies resist corrosion and keep the seal surface flat. Reinforced rubber gaskets, like those on the Romalon WR57X10032, are aimed at the dripping that sends most people shopping. Plastic housings are lighter and cheaper but demand careful seating. Durability is the one spec no listing can promise — treat any valve as a wear part and check the fittings at the first sign of slow water.
Common Questions
How do I know which refrigerator water valve fits my fridge?
What is the difference between a single port and a dual solenoid valve?
Why does my ice maker stop working when the water valve fails?
How long does a refrigerator water inlet valve usually last?
Do I need to shut off the water supply before replacing the valve?
Can I install a refrigerator water valve myself or do I need a technician?
Why is my new water valve leaking after installation?
Does a refrigerator water valve fix both the water dispenser and the ice maker?
What tools do I need to replace a refrigerator water inlet valve?
Is an OEM water valve better than an aftermarket replacement?
The Bottom Line
For LG owners, the LG Electronics AJU72992601 is the safe call — a factory part carrying the exact number your fridge was built with, and a swap most people finish in 10-15 minutes. If your badge says GE, Hotpoint, or Kenmore and you want separate pressure for ice and water, grab the Romalon WR57X10032, the two-port dual-solenoid valve with color-coded terminals and a pre-mounted bracket. And for a Frigidaire Gallery bottom freezer, the Frigidaire 242252702 is the one designed to the same specs as the appliance it repairs.
Match the part number first, count your ports second, and check your connector inner diameters third. Do those three things and the valve you order is the one that fits.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





