Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your new PS5 drive can run hot and slow itself down mid-game if the heatsink is wrong. The short answer: match the heatsink to your console model first. A PS5 Pro or Slim has a different cavity than the original PS5, so a heatsink built for the wrong internal frame either will not seat or blocks airflow. Get that one thing right, and a copper heat pipe set into aluminum fins gives your Gen4 drive (the newer, faster SSD type) the cooling headroom it needs to stop throttling (slowing down when it overheats).
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Fit, heat-pipe design and console generation (original, Slim or Pro) decide everything here. This picks list is built around one job: finding the best PS5 SSD heatsink for the drive you already bought or plan to add.
Top Picks



How To Choose The Best PS5 SSD Heatsink
A PS5 SSD heatsink is a slab that sits on top of your NVMe drive and pulls heat away from it. The drive is fast, and fast means hot; when it gets too hot, it slows down mid-game to protect itself. Your job is to buy a slab that fits your specific console, touches the drive through a thermal pad, and gives the chip a path to the PS5’s own fan.
Console generation and bay fit
The original PS5, the Slim (CFI-2000) and the Pro (CFI-7000) have different M.2 cavities. A cover built only for the Slim and Pro may not seat in the original, and a PS5-only slab can be the wrong shape for the smaller bodies. Read the compatibility line before anything else.
Heat pipe plus fins beats a plain plate
A copper heat pipe (a sealed tube that carries heat away fast) paired with aluminum fins spreads heat across more surface than a flat aluminum block. More fin area and moving air is what actually keeps the drive cool under a long download-and-play session.
Side-by-Side Comparison
| Model | Best For | Compatible With | Cooling Material | Bay Height | Amazon |
|---|---|---|---|---|---|
| MHQJRH M.2 2280 SSD Heatsink (SRP-002)★ Best Overall | Everyday PS5 and PC cooling on a budget | M.2 2280; PS5 and desktop | Aluminum alloy | 0.4 in tall | Amazon |
| be quiet! MC1 M.2 Cooler (BZ002)Quiet & Slim | Quiet single or double-sided drive builds | M.2 2280; PS5 slot | Aluminum | 0.39 in tall | Amazon |
| ineo PS5 Dust-Proof Heatsink (M24)Original PS5 Fit | Original PS5 UHD and Digital owners | PS5; 2230 to 22110 NVMe | Copper heat pipe, aluminum | 0.53 in tall | Amazon |
| Micro Connectors Low-Profile Kit (NGFFM2-HS-KIT) | Low-clearance fits with a full screw kit | M.2 2280; PS5 | Aluminum | 5 mm tall | Amazon |
| ElecGear EL-P5SC Heat Pipe Heatsink | PS5 Pro and Slim cavity fit | PS5 Pro (CFI-7000), Slim (CFI-2000) | Aluminum with copper heat pipe | 0.49 in tall | Amazon |
| SABRENT Rocket Heatsink (SB-HTSS) | Copper-plus-aluminum desk builds | M.2 2280 single/double-sided | Copper and aluminum | 0.9 in tall | Amazon |
| GRAUGEAR Shuttle Shaped Heatsink (G-PS5HS04) | PS5 bay with a dedicated heat-pipe cover | PS5; 2230 to 22110 NVMe | Copper heat pipe, aluminum fins | 0.55 in tall | Amazon |
| ElecGear EL-P5SP Ultra | Tinkerers chasing max cooling on PS5 Pro/Slim | PS5 Pro (CFI-7000), Slim (CFI-2000) | Dual aluminum decks, copper bridge | 0.69 in tall | Amazon |
| GRAUGEAR Cover Set (G-PS5HS01-Cov) | Dust protection plus cooling on a PS5 | PS5; M.2 2280 single/double-sided | Copper heat pipe, aluminum fins | 0.79 in tall | Amazon |
Detailed Reviews
1. MHQJRH M.2 2280 SSD Heatsink (SRP-002)
Our pick — 4.5+★ from 5,500+ verified ratings; the strongest balance of quality and price.
The slab that covers both sides of your drive and still drops into the PS5 bay.
For the largest pool of buyers — original PS5 and PC owners alike — this is the safe pick because it does the two jobs a heatsink actually has. It clamps onto both faces of an M.2 2280 drive (the 22 mm wide, 80 mm long stick your NVMe uses), so heat leaves the top and the bottom. The maker quotes a 10°C – 30°C drop depending on the environment — enough to keep a Gen4 drive under its throttle point during a long download.
The brass tacks are genuinely thought-through. Six adjustable height screws let the same cover sit over a short single-sided drive or a taller double-sided one, so it will not rock or press unevenly. That bare-metal weight is just 1 oz, and the profile is 3″L x 0.95″W x 0.4″H — the 0.4-inch height clears the PS5’s minimum 12 mm install requirement without fouling the bay lid. Buyers report the double-sided clip design stays put and the installation steps are clear enough to follow without a manual hunt.
What owners come back to most is split between cooling and the fact it just works in a PS5 expansion slot. It ships for a budget-friendly entry point, which is why it holds the top spot: it is the cheapest way here to get double-sided contact and a truly slim profile. The catch to price: the Nano thermal pad is soft and ductile, so line the drive up before you press — a crooked first placement is easy to make and fussy to peel off.
Why it earns the slot
- Double-sided aluminum contact cools the whole drive, not just the top label
- Six adjustable screws handle single- and double-sided heights
- 0.4-inch height sits inside the PS5 bay’s 12 mm minimum
- Only 1 oz, so no sag on the mounting post
What to plan around
- The soft thermal pad wants a careful first placement to avoid a crooked seal
- Aluminum-only construction works hard, unlike the copper heat-pipe picks further down
Buy this for: a first PS5 storage upgrade where you want proven double-sided cooling without overspending.
Think twice if: you want a copper heat pipe doing the heavy lifting — the ElecGear and ineo picks below cover that.
2. be quiet! MC1 M.2 SSD Cooler Heatsink (BZ002)
A low, all-black cooler that slips into the PS5 slot without a fuss.
This cooler does almost nothing extra and still gets the job done. It is a compact aluminum heatsink at 2.91″L x 0.94″W x 0.39″H — a hair lower than the MHQJRH above — and that 0.39-inch height keeps it clear of the bay lid while the console’s own fan moves the air. The maker claims it keeps the M.2 2280 module (the standard 22 x 80mm stick shape) cooler so it holds full read/write speed longer instead of down-clocking (dropping speed to cool off).
What wins people over is the actual cooling, and it comes from a simple black-aluminum body rather than a heat-pipe pipe. It fits single- and double-sided 2280 modules equally, ships with a 3-year warranty, and the all-black look disappears into a PC when it is not in the console. Owners also register the build quality and the price-to-peace-of-mind ratio as standouts — a slab you bolt on and forget.
The honest trade is that some PS5 owners mention needing to seat the drive and pads carefully on the first try; a crooked placement leaves a gap that softens the cooling. Get it flat once and this cooler is genuinely quiet and fuss-free. In a cooling-first lineup it is the value read: slab, pads, warranty, done.
The quiet answer: if you want a heatsink that seats cleanly, looks like nothing, and lets the PS5 fan handle airflow, this is a straightforward fit-and-forget choice.
The gap to know: the MC1 has no copper heat pipe. On a Gen4 drive baking through a long session, a heat-pipe cover spreads heat further — that is the reason to step up, not a reason to skip it.
Pick it up if: you have a PS5 slot to fill and want a slim, warranty-backed slab.
Look elsewhere if: you expect a passive plate to match a copper pipe on sustained heat.
3. ineo PS5 Dust-Proof Heatsink (M24)
Built for the original PS5 body — and it says so in the model name.
Check your console before you buy here. The ineo M24 is made for the original PS5 Ultra HD and Digital editions — it is not for the Slim or the Pro. If that is your machine, you get a 5mm pure copper heat pipe set into the lower aluminum deck. Heat from the SSD goes into the pipe and gets carried to a broad stretch of aluminum fins, and the fins sit where the PS5’s own intake fan can push fresh air across them.
The build is the heavy end of this lineup at 88 g, which is the weight that buys you real fin area rather than a wafer. That said, the depth is 5″L x 2.58″W x 0.53″H, so it clears the bay and snugs the inner frame. The kit even includes a screwdriver and pre-divided thermal pads in 1.0mm and 1.5mm so you can match the pad to your drive thickness. It supports 2230, 2242, 2260 and 2280 form factors, and 22110 is listed for later.
Owners highlight the tidy fit and the straightforward install most. The one detail worth remembering: if your NVMe drive already came with a thin heatsink fitted, peel it off first, or the ineo will not sit flat on the drive. Newer PS5 Slim or Pro owners should look right past this one to the ElecGear or GRAUGEAR options instead.
Why original-PS5 owners gravitate here: the copper heat pipe plus fin field is more cooling surface than an aluminum slab, and the included 1.0mm and 1.5mm pads fit both slim and chunky drives.
The fit rule to respect: strip the drive’s factory heat spreader first, and confirm your console is the original PS5 — the M24 will not work in the Slim or Pro cavity.
Best for: original PS5 Ultra HD and Digital owners who want heat-pipe cooling at a mid-range spend.
Do not buy for: a PS5 Slim or Pro, which this model is explicitly not built for.
4. Micro Connectors M.2 NVMe Installation Kit (NGFFM2-HS-KIT)
The kit plus slab approach: everything the PS5 bay screws need, in one box.
This is the parts-box answer to a PS5 upgrade. The Micro Connectors kit is a low-profile aluminum heatsink at just 70mm x 22mm x 5mm tall, paired with every fixing piece you might drop down the back of the console: two high and two low jackscrews, matching thumb-screw standoffs, four flat-head screws, washers and a screwdriver. It is built for 2280 (22 x 80mm) drives and lists the PS5 M.2 NVMe storage slot as a match.
The 5mm height is the point. On a bay where you want the heat sink to sit low and let the PS5 fan sweep the top face, that thin profile keeps clearance easy to judge. The silicone rings are heat-resistant and grip the sink so it does not wander once set, and the aluminum body gives the drive a rigid contact face. Because there is no customer review record to mine here, judge it on the specs: it is a tidy, complete starter kit rather than a heat-pipe performance cover.
The practical difference against the copper options above is the cooling philosophy — a flat aluminum pad spreads heat, a pipe-and-fins design moves more of it. If you are assembling a build and want your spare screws, standoffs and screwdriver in the same package, this saves a second order. If top-tier thermal dissipation is the goal, step up to the heat-pipe picks below.
Reach for it if: you want a slim 5mm aluminum sink plus the complete PS5 screw and standoff set in one box.
Skip the upgrade past it if: your drive will run hot for hours and you want a copper heat pipe doing the work.
5. ElecGear EL-P5SC Heat Pipe Heatsink
A 6.7mm copper pipe and a custom mounting post — built for the PS5 Pro and Slim cavity.
If you bought a PS5 Pro or Slim, the M.2 cavity is tighter than the original, and this ElecGear model is purpose-built for exactly that. A 6.7mm wide copper heat pipe is set flush into the lower deck, wicking heat from the drive into a wide field of aluminum fins. It fully tested with drives like the SN850, 970 EVO and 980 Pro, and the passive design runs silent — no fan to spin up. The fit is deliberate: 5″L x 1.31″W x 0.49″H, sized to the Slim (CFI-2000) and Pro (CFI-7000).
The detail that separates it is the mounting hardware. ElecGear swaps the stock screw and washer for a re-designed guide post with a standard M.2 screw and a PVC washer, so the drive seats flat instead of floating on the pile of parts the console ships with. Included EVA pads (soft foam strips) support both single- and double-sided drives, and the pre-divided thermal pads come in 1.0mm and 1.5mm so you match the pad to your module. It handles 2230, 2242, 2260, 2280 and 22110 form factors (the different SSD stick lengths).
Compatibility is what buyers wave the flag about here, and the Pro fits are clean. Compare its footprint against the be quiet! MC1 above — the ElecGear runs 5″L x 1.31″W x 0.49″H, while the MC1 sits at 2.91″L x 0.94″W x 0.39″H — so this one spreads over more of the slot to carry heat away. Strip any factory heatsink off the drive before it goes in, and if you are on the original big PS5 you want the ineo M24 instead, not this P5SC model.
Where it pulls ahead
- Sized specifically for the PS5 Pro and Slim M.2 cavity
- 6.7mm copper pipe feeds a broad aluminum fin field
- Custom mounting post seats the drive flat and secure
- Passive, silent design — nothing to whir or fail
Fit notes worth knowing
- Not made for the original PS5 body
- You must remove any factory heat spreader first
Your pick if: you own a PS5 Pro or Slim and want heat-pipe cooling with improved mounting hardware.
Wrong shape for: the original launch PS5 — that console needs a cover built for its bay.
6. SABRENT Rocket Heatsink (SB-HTSS)
Two metals, one slab — copper and aluminum working together to sink heat.
SABRENT pairs a copper layer with aluminum in one heatsink at 3.1″L x 1″W x 0.9″H, and the design is aimed at giving a drive more cooling headroom than a single metal. It takes single- and double-sided M.2 2280 drives, ships with thermal tape, screws and a screwdriver, and covers PS5 disc-version installs as well as desktop builds. Its stated job is the one that matters: keep the SSD cool enough that it does not throttle and lose speed.
Customers note a few degrees off the stock mounting position as the typical cooling gain. Owners also note the copper and aluminum layout is well put together and the blackout look is clean on a desk. Installation tips circulate for both one-sided and two-sided drives, which helps if you have a chunky double-sided module.
Here is the honest size of it: this slab is 0.9 inches tall, tall enough that you should confirm it clears the PS5 bay lid rather than assume. Fit and value come in for a some mixed notes in owner feedback, so read the depth against your console before buying. The payoff is real copper in the stack and a 1-year limited warranty (2 years with registration) — a fair mid-tier alternative to pure-aluminum plates.
The pitch in one line: copper plus aluminum for more cooling headroom than a plain plate, with the tape, screws and driver already in the box.
The check before you buy: at 0.9 inches tall, run a tape or eye against your PS5 bay lid — a PC case gives you more room than the console does.
Go for it if: you want copper in the mix and a screwdriver-included build for a PC or PS5 disc console.
Measure first if: the 0.9-inch height gives you pause in a tight PS5 bay.
7. GRAUGEAR Shuttle Shaped Heatsink (G-PS5HS04)
A cover shaped to the PS5 slot that swaps in copper heat pipe and aluminum fins.
This one replaces the stock PS5 M.2 cover entirely with a shuttle-shaped body at 5″L x 2.6″W x 0.55″H that drops into the expansion bay. Under the shell sits a copper heat pipe using DTH — Direct Touch Heat, where the flat machined face sits right on the drive — feeding into a plate-fin aluminum field. GRAUGEAR cites up to 50% less SSD heat, moved by the copper pipe into the plate-fin array.
What owners praise most is how clean the install goes and how well it performs once seated — one buyer notes no stalls or shutdowns, which is exactly what you want from a cooling cover during a long session. It handles single- and double-sided NVMe drives and form factors from 2230 through 2280 up to 22110. The thermal pads are specified: a single-sided blue pad at 1.0mm rated 4.8 W/m-k and a single-sided pink pad at 1.5mm rated 3.6 W/m-k (W/m-k measures how well a pad moves heat), with a screwdriver in the box.
The number to hold onto is that “up to 50%” claim, which is GRAUGEAR’s figure and depends on your setup — it is not a guaranteed drop. What you are really buying is the full-cover replacement look and the copper-pipe-plus-fins stack rather than a plain slab. Owners also like the design and the way it dresses up the PS5 bay.
What the shuttle shape buys you
- Full-cover replacement with a copper heat pipe and plate-fin aluminum field
- DTH flat-face contact sits directly on the SSD
- Thermal pads specified at 4.8 W/m-k and 3.6 W/m-k
- Sized for the PS5 and supports up to 22110 drives
Keep in mind
- The up-to-50% figure is a maker claim that varies with your install
- It is a PS5-bay cover, not a one-size desktop sink
Worth grabbing if: you want a PS5 cover with real copper-pipe cooling and a clean finished look in the bay.
Not your fit if: you are cooling a desktop drive outside a PS5.
8. ElecGear EL-P5SP Ultra Heatsink
The most elaborate cooler here — two decks joined by a nano-graphene copper bridge.
ElecGear took the P5SC above and added a whole second story. The EL-P5SP runs an internal aluminum deck and an external heatsink linked by a copper bridge coated with nano graphene (a thin carbon coating that helps spread heat), so heat travels off the drive, through the 6.7mm copper pipe, and out to a second set of fins. It is built for the PS5 Pro (CFI-7000) and Slim (CFI-2000) and measures 5.75″L x 3.78″W x 0.69″H at 126 g — clearly the biggest unit in this group, chasing the highest cooling ceiling the company offers.
Functionality and build quality are what owners consistently rate highest — the dual-deck design with the copper bridge is the reason it can move heat farther than a single slab. It stays passive and silent, supports the same 2230-to-22110 form factor range, and comes with multiple thermal pads plus screws and a screwdriver.
Now the caveat, and ElecGear puts it in plain text: this Ultra build can be a little complicated and takes DIY expertise, and its own product note suggests choosing the regular EL-P5SC model if you want a simpler install. There is also a physical step — the corner of the heat bridge should be cut for the newest PS5 Pro, following the video. Go in eyes-open on the extra work; the payoff is the most cooling coverage in the lineup.
What it is: a two-deck, copper-bridged heatsink with nano graphene on the bridge — the highest cooling ambition ElecGear sells for PS5 Pro and Slim.
What it demands: real installation patience, a trimmed bridge corner on the newest Pro, and a tolerance for fiddly work a simpler single-slab cover avoids.
Choose this if: you enjoy the build and want the maximum dual-deck cooling for a PS5 Pro or Slim.
Pick the simpler cover if: you would rather not trim parts or wrestle a multi-piece install.
9. GRAUGEAR Cover Set (G-PS5HS01-Cov)
A cover with a dust filter, so heat leaves the drive but grit stays out.
Most heatsinks ignore dust; this one is built around it. The GRAUGEAR cover set replaces the PS5’s M.2 slot cover with an extruded aluminum body plus a dust filter over the vents, and it routes heat through a copper heat pipe and an aluminum plate-fin stack. The vented cover keeps air moving over the fins, and the maker cites up to 45% less M.2 SSD heat. It measures 6.97″L x 2.99″W x 0.79″H and suits single- and double-sided M.2 2280 NVMe drives.
The DTH copper pipe is the same direct-touch approach as the shuttle model above — a flat machined face pressed onto the SSD so heat transfers fast. Four thermal pads, a screwdriver and screws come in the box. The dust-filter design is the differentiator: if your PS5 lives somewhere that gathers lint and pet hair, a sealed cover chokes airflow over time, and this one gives the bay a filter to catch that.
Treat the 45% figure the way you would any manufacturer claim — it depends on the install and environment, and it is not a promise. The deeper point is the airflow-versus-debris trade-off: a filter protects the drive from dust, but it can restrict air slightly, so clean it the way you clean any vent screen. For owners who want a finished cover that cools and guards, this is the one in the lineup built for exactly that.
Fits your build if: your PS5 sits where dust gathers and you want a cover that cools and filters in one piece.
Look past it if: you want the lowest possible restriction on airflow and no filter to maintain.
Know the Specs
Heat pipe vs. plain aluminum
A copper heat pipe is a sealed tube that moves heat from a hot spot to a wider area of fins; aluminum alone is a single solid slab. A pipe-and-fins design like the ineo or GRAUGEAR moves heat farther across the bay, which helps on a Gen4 drive running hard. An aluminum plate is cheaper and slimmer, and many owners are happy with it.
Thermal pad thickness
Thermal pads bridge the small air gap between the drive and the metal. If they are the wrong thickness, the metal never truly touches. That is why the ElecGear kits bundle 1.0mm and 1.5mm pads and the GRAUGEAR sets specify 1.0mm and 1.5mm — you match the pad to the drive’s single- or double-sided build for a real contact face.
Form factor support
2280 means the drive is 22 mm wide and 80 mm long, the most common PS5 size. Some covers also list 2230, 2242, 2260 and 22110. If you already have a 2280 drive, any cover here fits; the wider-range models matter if you might move a 2230 or 22110 drive into the console later.
Bay height and airflow
The PS5’s own fan pulls air through the M.2 bay, so a cover that sits too tall can crowd the lid or slow that flow. Slimmer covers like the 0.4-inch MHQJRH keep clearance easy; taller dual-deck units like the ElecGear Ultra have a bigger footprint and may need you to check the bay. Height is a fit question, not a quality one.
Common Questions
Will any M.2 2280 heatsink fit the PS5 SSD bay?
Is the heatsink the same for the PS5 Pro and the original PS5?
Do I need to remove my SSD’s own heatsink before installing a PS5 cover?
Does a heatsink really stop a PS5 SSD from slowing down?
Should I pick a copper heat pipe or a plain aluminum heatsink?
What thickness of thermal pad do I use?
Is a passive heatsink loud on a PS5?
Can a PS5 heatsink cover also keep dust out of the M.2 slot?
Do I need a screwdriver to install a PS5 SSD heatsink?
The Bottom Line
The safest all-around buy for the widest set of PS5 owners is the MHQJRH M.2 2280 SSD Heatsink — double-sided cooling in a slim 0.4-inch profile that clears the bay, and the model that keeps coming up as a clean PS5 fit. If you own a PS5 Pro or Slim and want a copper heat pipe with re-designed mounting, the ElecGear EL-P5SC is the one to reach for. And if your console already runs hot under long sessions and you enjoy a real install, the two-deck ElecGear EL-P5SP Ultra pushes cooling coverage the furthest — just go in ready for the extra work.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





