4 Best Polished Brass Cabinet Pulls | Skip The Hollow Zamak Pulls

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You want a cabinet pull that looks like real brass and still feels solid after a thousand opens. The catch is that most shiny pulls on the shelf are hollow zinc dressed up in a gold finish, and they can flex in your hand the moment you tighten the screws. This guide covers four polished brass cabinet pulls that hold their shape, all with the same 5-inch hole spacing, so you can pick the handle that matches your kitchen, your drawer fronts, and your patience for installation.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Every option here is a 5-inch hole-center pull, which means the mounting screws sit 5 inches apart on center, so check your existing handle spacing before you order anything. Below you will find honest comparisons of four strong polished brass cabinet pulls, all measured hole-center to hole-center so you can swap them straight onto your current cabinets.

Top Picks

khtumeware 10 Pack 5 Inch Hole Center Brushed Brass Cabinet Pulls
Best Overallkhtumeware 10 Pack 5 Inch Brushed Brass Cabinet Pulls4.5+★650+ ratingsTen pulls of heavy-duty zinc at 5.6 inches long — the bulk buy that outfits a whole kitchen without a second order. This is the pick for anyone replacing every handle in a kitchen or bath at once.Check price on Amazon

How To Choose The Best Polished Brass Cabinet Pulls

Three numbers on a cabinet pull decide almost everything: hole spacing, overall length, and projection. Match all three to your existing hardware and the swap takes minutes. Get them wrong and you are drilling new holes in a door you just painted.

Measure your existing hole spacing first

Hole spacing (also called center-to-center) is the distance between the middle of one screw hole and the middle of the other. All four pulls in this guide use 5 inches, which is the same as 128mm. Those two figures describe the same span, so a 128mm drill guide works fine on a 5-inch pull. If your current handle measures 4 inches between holes, none of these will drop in without new drilling.

Decide between zinc alloy and solid brass

Zinc alloy is a cast metal blend that is easy to mold into a smooth shape and holds a plated finish well. Solid brass is a copper-and-zinc metal that can be polished back to shine and carries more weight in the hand. Neither is a bad choice for a kitchen drawer. If you want the heaviest pull you can buy, solid brass wins; if you want the crispest polished finish at a lower cost, zinc alloy does the job.

Check screw length against your door thickness

Your cabinet door has a thickness, and the screws must reach through it plus the pull. A pack with two screw lengths covers more door thicknesses than a pack with one. Skip that check and you will be hunting for machine screws mid-install with the door off its hinges.

Side-by-Side Comparison

Model Best For Hole Spacing Overall Length Projection Amazon
khtumeware 10 Pack Brushed Brass Pulls★ Best Overall Buying in bulk for a whole kitchen 5 in (128mm) 5.6 in (144mm) 1.3 in (34mm) Amazon
CABDM 10 Pack Polished Brass Pulls Thicker doors and a bolder grip 5 in (128mm) 6.2 in (157mm) 1.38 in (35mm) Amazon
khtumeware 10-Pack Polished Brass Pulls A smooth, low-profile polished look 5 in (128mm) 5.75 in (146mm) 1.38 in (35mm) Amazon
KOPPALIVE 6-Pack Hammered Brass Pulls Hammered texture on white cabinets 5 in (128mm) 6-7/8 in — Amazon

Detailed Reviews

★ Best Overall

1. khtumeware 10 Pack 5 Inch Brushed Brass Cabinet Pulls

Our pick — 4.5+★ from 650+ verified ratings; the strongest balance of quality and price.

Zinc alloy10-pack

Ten pulls of heavy-duty zinc at 5.6 inches long — the bulk buy that outfits a whole kitchen without a second order.

This is the pick for anyone replacing every handle in a kitchen or bath at once. The pack gives you 10 pulls at a 5 inch (128mm) hole spacing, so a standard cabinet run is covered in one shipment instead of three. Each pull measures 5.6 inches overall with a 1.3 inch projection, which is a flat, close-to-the-door grip that will not catch a hip as you walk past the counter.

What wins people over is the heft. The zinc alloy body (a metal mix that feels dense and solid, not thin and hollow) gives it a substantial feel, and the brushed finish gives it a softer, warmer look than a mirror-polished shine. Reviewers keep circling back to two things — the build quality and the aged brass look — and that combination is why it holds the top spot here with 4.5+ stars across 600+ ratings.

The honest trade-off is the finish itself. Brushed brass is not the same as polished brass — it carries a soft directional grain, so if your kitchen hinges and faucet are mirror-bright, this will look a shade more muted than you expect. It also pairs best with warm-toned fixtures rather than cool chrome.

The case for the ten-pack

  • Ten pulls at 5 inch (128mm) spacing cover a full kitchen run in one order
  • Zinc alloy body has real density instead of a thin, hollow feel
  • Brushed finish reads warm and aged rather than bright gold
  • Installation hardware included, so no separate screw run

Where it gives way

  • Brushed grain is softer than a true mirror-polished brass
  • Only one screw length per pack, so unusually thick doors need a hardware stop

Grab this one when: you are redoing a whole kitchen or a long run of drawers and want the cost per pull to stay sensible.

Think twice if: your existing faucet and hinges are high-gloss polished and you want the new pulls to mirror them exactly.

Boldest Grip

2. CABDM 10 Pack 5 Inch Polished Brass Cabinet Pulls

Solid brassTwo screw lengths

The chunky one — 0.7 inches of brass across the bar, so a full hand wraps it instead of pinching.

If your cabinets are wide and your doors are thick, this is the pull that fills the space. The bar is 0.7 inches in diameter, versus 0.5 inches on the khtumeware polished pack, so it sits noticeably fatter in your palm. Overall length runs 6.2 inches, which beats the 5.6 inches of the brushed pack above by a visible margin — good news on big pantry doors, less welcome on a narrow drawer front where the pull can crowd the edges.

It also arrives ready for thicker stock. Each handle ships with one 1 inch and one 1.5 inch screw, covering cabinet doors from 0.63 to 0.87 inches and 1.18 to 1.37 inches thick. That second pair of screws is the difference between a clean five-minute swap and a trip to the hardware store. The 1.38 inch projection puts a little more air under your knuckles, so wet hands on a dishwasher door still get a full grip.

What it nails: the polished brass finish reads genuinely gold in daylight and holds up on a kitchen or vanity run, and owners compare it favourably with boutique hardware lines.

The one caveat: it is the longest pull in this group at 6.2 inches, so measure twice on slim drawer fronts before you commit.

Reach for this if: your doors are on the thicker side or you want a pull that grabs easily with a full hand.

Look elsewhere if: your drawers are narrow and a 6.2 inch bar would run past the front edge.

Slim Polished

3. khtumeware 10-Pack Polished Brass Cabinet Pulls, 5 Inch

Polished goldFingerprint-resistant

A 0.5 inch slim bar in polished gold — the disc
reet profile that keeps bright hardware looking clean.

Here is the polished option for anyone who wants shine without a fat bar. The diameter is 0.5 inch (13mm) — half the thickness of the CABDM above — and the overall length is 5.75 inches (146mm). That slimmer profile looks tidy on shaker and slab doors, and it keeps the line of the cabinet visible rather than breaking it with a heavy chunk of metal.

Zinc alloy construction with a polished brass finish sits underneath the shine, and the finish is built to resist fingerprint marks — a real benefit on a pull your whole family touches every day. The 1.38 inch projection matches the CABDM exactly, so your grip clearance is the same even though the bar is thinner. Screws come in the box.

Fit is the watch point: the fit side of the record is mixed. Measurement is on you here — confirm the existing holes measure 5 inches center to center before ordering, because some older handles drill at 4 inches and will not line up.

Why it earns a spot: the value read is strong. On the cabinet the polished gold finish reads like boutique hardware, and owners pair it with warm bronze faucets without a colour clash.

Best match: a bright, slim pull on shaker doors where a thin brass line reads more contemporary than a chunky bar.

Only caveat: measure your old hole spacing with a ruler first — this one wants a true 5 inch span.

Hammered Finish

4. KOPPALIVE 6-Pack Solid Brass Cabinet Pulls

Solid brassHammered texture

Real solid brass at 5.9 ounces per pull, with a hammered face that catches light in every dent.

Six pulls, not ten — so this pack suits a smaller project or a statement row of drawers rather than a whole kitchen. What you get instead is material. Each handle is solid brass with a polished finish, and it weighs 5.9 ounces (166g) on its own, which is the kind of mass you feel the moment you lift it out of the wrapper. The finish is polished to a shine and the hammered face gives it texture rather than a flat mirror look.

The total length runs 6-7/8 inches with a 5 inch (128mm) hole spacing, and each pull ships with both 1 inch and 1-3/4 inch M4 screws. Those two sizes cover cabinet door thicknesses from 1/2 inch to 1-1/2 inch, so a mixed set of drawers and doors on the same run is not a problem. Each pull also comes individually wrapped, which protects the polished surface before it goes on the cabinet.

On white cabinets the hammered texture is where this one shines. The etching shimmers as the light moves across it, so a plain white shaker door gets a subtle bit of movement without any colour added. It is the priciest pick per pull here because you are buying brass rather than zinc, and that is a fair swap if the material matters to you.

What you are paying for

  • Solid brass at 5.9 oz (166g) per pull — the heaviest in this group
  • Two M4 screw lengths cover doors from 1/2 inch to 1-1/2 inch thick
  • Hammered face gives plain white cabinets a bit of surface interest
  • Each pull individually wrapped to protect the polished finish

What to plan around

  • Six pulls per pack, so a full kitchen run needs more than one order
  • The hammered texture shows in a close-up photo in a way a smooth pull does not

Pick this for: white or cream cabinets where you want real brass weight and a hand-worked texture.

Pass it over if: you need ten or more matching pulls and would rather place one order than two.

Know the Specs

Hole spacing (center to center)

The distance between the middle of one screw hole and the middle of the other, usually listed in inches and millimeters together. All four picks here use 5 inches, the same as 128mm. Measure your current hardware across the two screw centers before ordering — if it reads 4 inches, none of these drop in without new holes.

Projection

How far the pull stands out from the cabinet face. The brushed khtumeware sits at 1.3 inches, while the CABDM and the polished khtumeware both sit at 1.38 inches. More projection means more room for your knuckles; less projection means a flatter look that will not snag on a passing sleeve.

Diameter and overall length

The bar thickness and the full tip-to-tip span. The CABDM runs 0.7 inches thick and 6.2 inches long; the polished khtumeware runs 0.5 inches thick and 5.75 inches long. A fatter, longer bar suits wide doors and big hands. A slim bar keeps narrow drawer fronts looking neat.

Zinc alloy versus solid brass

Zinc alloy is a cast metal that takes a plated finish smoothly and keeps costs down. Solid brass is a heavier metal that can be polished back to shine. Both hold up to daily kitchen use. Solid brass carries more weight in the hand and usually costs more per pull, which is why the KOPPALIVE pack gives you six instead of ten.

Finish care

A polished brass finish shows fingerprints more readily than a brushed one. A soft dry cloth keeps it bright. Avoid abrasive cleaners, which can dull the surface. The brushed finish is the more forgiving of the two if you want a pull that hides everyday handling.

Common Questions

Will a 5 inch pull fit the holes already in my cabinet?
Only if your current handle measures 5 inches between the two screw centers, which is the same as 128mm. Measure from the middle of one hole to the middle of the other. If that reads 4 inches, these pulls will not line up and you would need to drill new holes or pick a handle with matching spacing.
What is the difference between polished brass and brushed brass?
Polished brass is buffed to a bright, mirror-like shine that reflects light in a sharp way. Brushed brass has a soft directional grain that breaks up reflections and hides fingerprints better. Polished reads more formal, brushed reads warmer and more forgiving in a busy kitchen.
Do I need special tools to install cabinet pulls?
No. You need a screwdriver and the screws that come in the box. The one thing you do need is a check on screw length against your door thickness. The CABDM pack includes 1 inch and 1.5 inch screws, and the KOPPALIVE pack includes 1 inch and 1-3/4 inch M4 screws, so measure your door before starting.
Will zinc alloy pulls rust in a humid bathroom?
Zinc alloy takes a plated finish that resists moisture and everyday cleaning agents, so it holds up in a humid bathroom or a busy kitchen. Keeping the surface dry after a wipe-down helps the finish stay bright. The polished finish is where fingerprints show most, not where rust starts.
How thick a cabinet door can these screws handle?
It depends on the screws in the pack. The CABDM pull ships with screws sized for doors from 0.63 to 0.87 inches and 1.18 to 1.37 inches. The KOPPALIVE pull ships with M4 screws for doors from 1/2 inch to 1-1/2 inch. The brushed and polished khtumeware packs each include standard mounting hardware.
Is solid brass better than zinc alloy for kitchen drawers?
Solid brass gives you more weight in the hand and a metal that can be repolished over time. Zinc alloy gives you a smooth, even finish at a lower cost per pull. For a busy family kitchen, both hold up; the choice usually depends on if you want the heaviest feel.
How many pulls do I need for a standard kitchen?
Count every door and drawer front you plan to change, then add a couple of spares for a damaged pull later. The brushed and polished khtumeware packs give you 10 each, the CABDM pack gives you 10, and the KOPPALIVE pack gives you 6. A smaller kitchen usually fits in one pack; a large one may need two.
Will polished brass pulls match my champagne bronze faucet?
They sit in the same warm family, so the pairing usually works. The brushed khtumeware pull leans warmer and softer, which suits a champagne bronze faucet well. A mirror-polished brass pull will read a touch brighter next to it, so lay one pull beside the faucet before you commit the whole run.
Can these pulls go on a dresser or wardrobe instead of cabinets?
Yes. All four are listed for cabinets, drawers, dressers, wardrobes and cupboards. The key is still the 5 inch (128mm) hole spacing. The polished khtumeware pack is listed for dressers too, and the brushed khtumeware pack is listed for wardrobes and other storage spaces.
How do I keep the polished finish looking new?
Wipe with a soft damp cloth and dry it right away, and skip abrasive scrubbing pads. The polished khtumeware pack is finished to resist fingerprint marks. For any polished brass pull, the goal is to keep cleaning agents off the surface for long stretches, because they can dull the shine.

The Bottom Line

For most kitchens, the polished brass cabinet pulls winner is the khtumeware 10 Pack Brushed Brass Pulls because ten pulls at one 5 inch spacing cover a whole run, and the zinc alloy body is dense enough to feel solid after years of daily opens. If you want the boldest grip and thicker-door screws in the box, grab the CABDM 10 Pack. And for real solid brass with a hammered texture on white cabinets, the KOPPALIVE 6-Pack is the one to reach for. Whichever you pick, measure your old hole spacing with a ruler first — a two-minute check saves a whole afternoon of drilling, and it is the single step most likely to make or break the swap.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top