Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You bought the Ultra Bee because it pulls like nothing else in its class. Then the stock tires, pads and pegs started letting that power leak away. The fix is not a whole new bike — it is a handful of well-chosen parts that each solve one specific problem, and this guide tells you which ones fit the Ultra Bee and which ones quietly do not.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every entry below has been checked against Ultra Bee fitment specifically, not generic e-moto listings. You will see exactly where each part helps and where a cheap alternative falls short, all inside this guide to surron ultra bee parts.
Top Picks



How To Choose The Best Surron Ultra Bee Parts
The Ultra Bee sits in an awkward spot for parts shopping: it is close enough to other e-motos that sellers slap “universal” on everything, and different enough that universal parts often fit badly or not at all. Start with fitment, then work outward to material and function.
Fitment beats brand name every time on Ultra Bee parts
A part listed as fitting the Ultra Bee specifically is worth more than a fancier part that needs modification. Check the listing for the model name spelled correctly and for a vehicle-specific fit type. If the listing talks about the Light Bee or Storm Bee as its main fit, assume it will not drop onto your Ultra Bee without work.
Material tells you how long the part survives
Stainless steel, 7075 aluminum and sintered metal are all chosen because they resist something specific — rust, flex, or heat. Polypropylene (PP) plastic is light and cheap but has a different job: it flexes and absorbs hits instead of cracking. Match the material to the abuse the part actually takes: stainless for mud and water, 7075 aluminum for flex under your boots, PP for impact.
Wear parts deserve the most attention
Tires and brake pads are the two things standing between your throttle hand and the ground. A slightly more expensive compound here pays back in grip and in how often you replace it. Cosmetic parts can be budget-friendly; contact and friction parts usually should not be.
Side-by-Side Comparison
| Model | Best For | Position | Material | Fitment | Amazon |
|---|---|---|---|---|---|
| CYBER 80/100-19 Street Tire★ Best Overall | Pavement grip and commuting | Front/Rear | High-wear rubber, 4-ply | Vehicle specific | Amazon |
| Axiniu 2 Pairs Sintered Brake PadsTop Stopping Pick | Off-road stopping power | Front and rear | Sintered metal | Ultra Bee specific | Amazon |
| FMO Foot Lock (One Side)Quiet Fix | Stopping the footrest swing | Footrest | 304 stainless steel | Vehicle specific | Amazon |
| BAOUFF CNC 7075 Foot Pegs | Muddy-trail foot control | Rear | 7075 aluminum | Vehicle specific | Amazon |
| BAOUFF Rear Fender | Rear mud and rock spray | Rear | Polypropylene (PP) | Vehicle specific | Amazon |
| BAOUFF Front Fender | Carbon-look front protection | Front | PP with carbon fiber texture | Vehicle specific | Amazon |
| URLWALL LED Headlight | Night riding visibility | Front | Aluminum housing, PC lens | Ultra Bee specific | Amazon |
| Enjoy Mfg Seat Cover #388 | Staying planted on rough ground | Top | PVC gripper vinyl | Custom fit | Amazon |
Detailed Reviews
1. CYBER 80/100-19 Street Tire
Our pick — 4.5+★ from 80+ verified ratings; the strongest balance of quality and price.
The tire that finally puts your Ultra Bee’s torque onto the asphalt instead of into wheelspin.
Here is the part that changes how the bike feels more than anything else you can bolt on: the rubber. This CYBER is built for pavement first — a street-specific tread pattern and a high-wear rubber compound meant for city commuting and supermoto setups. That is the honest starting point. If your riding is mostly trail, this is the wrong pick and you should keep looking.
The headline spec is the 19-inch rim size, matched to an 80/100-19 front/rear fit that the maker also offers in 90/100-18, 80/100-17, 60/100-14 and 70/100-12 — so check which wheel you are actually buying for before you add it to the cart. It is a 4-ply construction, which means a thicker carcass than a thin single-ply street tire, and buyers describe it as “really thick” and unlikely to puncture anytime soon. On a bike this heavy, that extra carcass matters in town.
The one thing that wins people over is the quality of the build — it is the trait buyers bring up more than any other, with fit running second. Riders have reported that it grips the pavement well and that moving to it from a knobbier tire actually gained them range thanks to lower rolling resistance. What the reviews sum up: “they look great and give a lot of grip on the road.” The trade-off is real and it is cost — value is the one mixed note in the feedback, with several riders feeling it is priced high for what it is, even while calling it the best road tire they have ridden on an e-moto.
What Sells This Tire
- Street-specific tread and 19-inch rim sizing built for supermoto setups rather than dirt
- 4-ply carcass adds puncture resistance for daily commuting weight
- Buyers consistently describe strong pavement grip and confident cornering
- 1-year limited warranty against manufacturing defects
Where It Stings
- Value is the recurring mixed note — it costs more than generic street rubber
- Pavement-focused tread is the wrong tool for serious off-road riding
- Multiple sizes share one listing, so an easy misclick on wheel size is possible
Reach for it if: most of your Ultra Bee miles happen on asphalt and you want the contact patch to match the torque.
Pass if: your weekends are mostly mud and gravel — a street compound will not give you what you want there.
2. Axiniu 2 Pairs Sintered Metal Brake Pads
Four pads rated to 800°C, so your brakes keep biting after a long descent instead of fading away.
You get four pads total here — 2 pairs, boxed as 2 items, so you can refresh the front and rear in one order. Compare that to the FMO Foot Lock on this list, which is a 1-count single item: this listing is a 2.0x quantity buy, which is exactly what you want from a wear part you will be replacing again.
The material is the reason to pick it. Sintered metal is metal particles fused under heat, and that makes it far more heat-tolerant than organic pads. Axiniu rates these sintered pads to 800°C and claims 3× the lifespan of organic pads. Take that longevity figure as the maker’s claim rather than gospel, but the heat resistance is the real point: on a heavy e-moto hauling down repeated descents, organic pads are the ones that go soft and noisy first. These are also called out as quiet, with an upgraded friction formulation meant to bite instantly without squeal.
One design note worth knowing: this is the upgraded version with a slightly larger contact area than older pads, and the maker says it also drops into earlier Ultra Bee models to give them the same improved response. The catch is fitment checking — the listing itself asks you to verify the dimensions and shape of your original pads before ordering, and installation instructions are not in the box. If you have never pulled a caliper apart, plan for a learning curve or a shop visit.
The heat case: an 800°C rating and a claimed 3× lifespan over organic pads, from a maker that backs it with a 1-year warranty, is the strongest friction argument on this whole list.
Do the homework: no instructions included and a self-check on pad dimensions — a five-minute caliper comparison before you buy saves a return.
Best matched to: trail riders who brake hard and repeatedly, and anyone tired of squealing stock pads.
Think twice if: you want a bolt-on with printed directions in the box.
3. FMO Foot Lock (One Side) Pedal
One stainless bracket that stops your footrest rattling loose while you ride and while you haul.
This is a small part solving a very specific annoyance. The FMO is a one-side foot lock built from 304 stainless steel — the grade chosen for rust resistance and strength, which matters because a footrest stabilizer lives right where mud and water collect. Its job is to fix the footrest firmly and stop it swinging during riding and transport.
Installation is genuinely simple by design: vehicle-specific fit, direct install, no modification required. You are not drilling anything or fabricating a bracket. If you strap your Ultra Bee down in a truck bed, that “prevents swinging during transport” line is the whole reason to buy it.
Two things to know before you click. It is a single-side unit and a one-count item, so it covers one footrest — do not assume both sides arrive. And there is no manufacturer warranty listed on this part, so it is a straightforward “buy it, install it, done” transaction with no safety net behind it. At this tier and with stainless construction, that is a fair trade.
Why it earns a slot: 304 stainless, direct fit, zero modification — a fix for a real annoyance with no complexity attached.
Pick it for: stopping footrest swing during riding and trailer transport.
One caveat: single side only, and no warranty is printed on the listing.
4. BAOUFF CNC 7075 Aluminum Widen Foot Pegs
A wider platform of anti-slip teeth that keeps your boots planted when the trail turns slick.
If your feet slide around on wet roots, this is the fix. The BAOUFF pegs are machined from 7075 aluminum — an aerospace-grade alloy chosen for high hardness at low weight — and they are widened to give your boot more real estate to stand on. The surface is covered with anti-slip nails, and the package includes 6 replaceable teeth so worn or lost ones can be swapped instead of retiring the pair.
The install is described as a few-minute job, and the box carries the small parts that trip people up: gaskets, pins and laminations. Anodizing is not just cosmetic here — it is the same process that builds corrosion and oxidation resistance, which is what you want on a part that spends its life in mud and grit.
Fitment is vehicle-specific for the Ultra Bee, and the maker asks you to confirm your model before ordering — worth doing, because foot peg mounts are one of the places aftermarket parts are most often returned. The honest limitation is that these are dirt-focused pegs; the open anti-slip tooth design that grips mud so well is the same design that will chew up a soft-soled shoe on a pavement run.
Why Riders Swap These In
- 7075 aluminum delivers high hardness without adding heft
- Anti-slip teeth plus 6 replaceable spares extend the peg’s life
- Gaskets, pins and laminations all included for a quick install
- Anodized finish adds corrosion and oxidation resistance
The Fair Warning
- Aggressive tooth design is built for off-road, not pavement cruising
- Model-specific fit means you must verify the Ultra Bee match before buying
Worth it for: muddy-track riders whose boots slip on the stock pegs.
Not it if: the bike mostly lives on tarmac in soft shoes.
5. BAOUFF Rear Fender
The straight replacement for a cracked rear mudguard, shaped to the Ultra Bee frame with no trimming.
Replacing a fender should not require a dremel. This one is cut to follow the Ultra Bee’s frame contours, so it slots in where the stock mudguard sat rather than being forced into place. It is made from high-strength polypropylene (PP) — a plastic that flexes under impact instead of shattering, which is the right call for something that eats trail debris and prolonged sun exposure.
Its practical value is the spray it blocks. Mud, dirt, water and thrown trail rocks all get kept off your back, your gear and the rear seat area on wet rides. The outer surface is deliberately smooth so dried mud and grime wipe away with water or a damp towel — a small thing until you have spent twenty minutes scrubbing a textured fender.
Install is pre-drilled factory mounting points, original hardware, no drilling or cutting. Do check what arrived in the box, though: the included components line reads “comes with housing,” so confirm the actual fender is what you are holding before you start. Fit is vehicle-specific and dirt-focused, so pavement-only riders get less out of it.
Built for the wet stuff: a smooth, wipe-clean PP surface and pre-drilled bolt-on points make this a no-drama replacement.
The small catch: the packaging description is vague about contents, so open the box before your first ride.
Right choice when: your original rear fender has given up and you want a clean swap with factory hardware.
Look elsewhere if: you want a fender with an extended or custom mud-flap design.
6. BAOUFF Front Fender
A front guard with a carbon-look skin that hardens up the plastic and sharpens the bike’s face.
Same maker as the rear fender above, different brief. This front piece is made from PP plastic too, but BAOUFF specifies higher hardness and greater durability than the original front mudguard — and it is produced by injection molding, which is why the mounting holes are precise rather than approximate.
The carbon fiber texture pattern is the visible upgrade: a surface finish, not a structural carbon panel, so read it as styling that also happens to look more aggressive than bare black plastic. Functionally it does the job you need from a front fender — catching dirt and small stones thrown up by the front wheel before they reach you.
Honest read: this is the lowest-rated item on the list, and that is worth naming plainly rather than glossing. Front plastic is also the part most likely to take a hit and most likely to arrive bent if the courier is unkind. If you are buying purely for protection, the plain rear-style approach works fine; if you want the bike to look different from every other Ultra Bee at the trailhead, the carbon-look finish is the reason to choose this one.
The styling angle: injection-molded PP with reserved mounting holes and a carbon fiber texture finish that dresses up the front end.
Keep expectations level: it is a cosmetic-finish plastic fender, and the weakest-reviewed piece here — inspect it the day it lands.
Buy it if: you want a front fender that changes the look as much as it blocks stones.
Skip the upgrade if: you only care about coverage and would rather have plain black plastic.
7. URLWALL LED Headlight
Four LED bulbs and a pure white beam that turns the stock headlight into the weak link it was.
The single most useful number here is 4000 lumens on high beam. Lumen is a measure of how much total light a lamp throws, and 2800 lumens on low beam with 6000K pure white light — a cool, daylight-toned colour — is the difference between seeing a trail at night and guessing at it. The maker claims 400% more brightness than the factory headlight, with a beam pattern tuned to avoid dark spots and uneven throw without blinding oncoming traffic.
Owners describe the swap itself as true plug-and-play, with installation being the most praised thing about it by a wide margin and brightness right behind. The wiring compatibility is the part to appreciate: the plug-and-play design means no cutting and splicing in the harness, and the maker says the job usually takes about 15-20 minutes. The headlight body is aluminum with a black painted finish and a polycarbonate (PC) lens, meant to shrug off shock and vibration.
Now the honest part, and it is the biggest caveat on this list. Functionality, bracket quality and the mode cycling all draw mixed feedback, with the mounting bracket specifically called flimsy and the button sequence for switching modes frustrating for some. Plan on reinforcing or replacing the bracket if you ride rough ground. On the plus side, the housing is dustproof and waterproof to IP67 — fully sealed against dust and able to survive being dunked briefly — with a heat sink for cooling and a rated life of over 50000 hours. There is an SOS strobe mode in there too, for signalling help in bad weather or after a spill.
What Makes It Worth It
- 4000 lumens high beam and 2800 lumens low beam in 6000K white light
- Genuine plug-and-play wiring — no harness cutting, roughly 15-20 minutes to fit
- IP67 sealed housing with heat sink cooling and 50000+ hour rated life
- SOS strobe mode for signalling help when things go wrong
Where It Falls Short
- Mounting bracket is the recurring weak point — described as flimsy
- Switching between the 3 modes frustrates some owners
- Only a 30-day warranty from the purchase date
Grab one if: you ride after dark and want the trail visible rather than assumed.
Budget for it: a sturdier bracket than the one in the box, and thirty days of warranty means testing it early.
8. Enjoy Mfg USA-Made Seat Cover #388
A textured vinyl cover that holds you in place when the trail gets rough and the stock seat starts sliding you back.
The trick with a gripper cover is the surface. Enjoy Mfg uses a PVC top texture — a waterproof, wear-resistant vinyl with a raised pattern — and that texture is what holds you in place while a cheap slip-on cover shifts and slides underneath you. This is a custom-cut cover patterned for the Ultra Bee rather than a universal stretch-fit, so it follows the seat shape instead of fighting it.
Construction is the pitch: cut and sewn in the USA, double-stitched seams, quality-checked one cover at a time rather than mass-produced overseas. The fit is described as OEM-quality once installed. The install itself is the catch you need to hear — the old cover comes off, the new one goes on evenly, and then it gets stapled underneath. That means a staple gun is required, and it is a job for someone comfortable pulling their seat apart.
If your stock seat has worn through, cracked, or turned slick, the textured surface is a genuine improvement in control over rough ground. If your stock seat is intact and grippy, hold off — this cover is for seats that have worn through, cracked or turned slick.
Why it works: a waterproof PVC gripper texture, USA cut-and-sewn construction, and double-stitched seams holding it together.
Go for it when: the original seat is worn slick and you want your boots to stay where you put them.
Plan ahead: a staple gun and some patience are part of the job, and no warranty applies.
Know the Specs
Tire Size Codes Like 80/100-19
Those three numbers are not random. The first is the width in millimetres, the second is the sidewall height as a percentage of that width, and the last is the rim diameter in inches. An 80/100-19 therefore sits on a 19-inch rim. Getting the rim diameter wrong is the single most common wheel mistake on an e-moto, so match that last number to your actual wheel before you order.
Sintered Metal Versus Organic Pads
Sintered pads are metal powder fused together under heat, and organic pads use a softer mix of fibres and resins. Sintered pads handle heat far better, which shows up on long downhill braking where organic pads start to fade. They also tend to last longer, though they can be harder on rotors and slightly noisier. Organic pads are quieter and gentler but wear faster under heavy e-moto loads.
What 7075 Aluminum Actually Means
7075 is an alloy that includes zinc, chosen when a part needs high hardness at low weight. On foot pegs, that means less flex under your boots than a softer alloy. It is not indestructible — anodizing protects the surface against corrosion and oxidation, but impact damage still happens. Treat 7075 as a stiffness-and-weight choice rather than a licence to abuse the part.
IP Ratings Explained
An IP rating has two digits. The first is dust protection, the second is water. IP67 means the first digit 6 (dust-tight) plus a 7 for water — able to survive short immersion. For a headlight, that rating is about surviving rain, mud spray and stream crossings without filling up. It does not mean you should leave the bike submerged, and it does not cover electrical connectors that are not themselves sealed.
Common Questions
Will these parts fit a Surron Light Bee instead of an Ultra Bee?
How do I know which tire size my Ultra Bee wheels actually take?
Do sintered brake pads wear out rotors faster than organic pads?
Can I install the URLWALL headlight without cutting any wiring?
Is the Enjoy Mfg seat cover a slip-on or does it need staples?
How long should a set of Ultra Bee brake pads last?
What does IP67 protect the headlight against on a muddy trail?
Do wider foot pegs make a real difference off-road?
Will the rear fender fit without drilling new holes?
Should I upgrade the seat cover or the foot pegs first?
The Bottom Line
The best all-round upgrade for most Ultra Bee owners is the CYBER 80/100-19 Street Tire, because it is the part that changes how the bike behaves every single ride — the compound and tread put the torque onto the road where you can use it. If your riding is trail-first, the Axiniu Sintered Brake Pads earn their place next, with an 800°C heat rating and four pads in one pack so front and rear get done together. And for anyone who rides after dark, the URLWALL LED Headlight is the one to reach for, provided you budget for a sturdier bracket than the one that ships with it. Start with the contact points — tires, brake pads, foot pegs — and let the fenders and seat cover wait.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




