9 Best Ryobi Oscillating Tool Blades | Teeth That Hold

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Buying blades for a Ryobi oscillating tool is mostly a fit question, not a brand question. Most of the sets below bolt straight onto a standard Ryobi mount without an adapter, and the real difference between them is how long the teeth survive and how many of each blade type you actually get. If you want the short answer: the AIFICUT 55-piece kit is the safest all-round buy, and the genuine RYOBI 16-piece set is the one to pick when you want the maker’s own fitment and a case to keep it in.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Blade shopping gets confusing fast because every listing brags about piece count while saying almost nothing about tooth geometry. Below you’ll find nine Ryobi-compatible sets broken down by blade mix, steel type and mount, so you can match a kit to the jobs you actually do. This breakdown of the ryobi oscillating tool blades covers what fits, what lasts, and which kit suits your bench.

Top Picks

AIFICUT 55 PCS Oscillating Saw Blades Quick Release Universal Kit
Best OverallAIFICUT 55 PCS Oscillating Saw Blades4.5+★950+ ratingsA 55-piece kit that swallows a whole weekend of remodeling without a second order. This is the set to buy if you own one oscillating tool and want a box that covers cutting, grinding and scraping without thinking about it again for months.Check price on Amazon
LEILUO 20Pcs Titanium Oscillating Tool Blade Set
Deep Reach PickLEILUO 20Pcs Titanium Oscillating Tool Blade Set4.5+★900+ ratingsTwo blades here reach 70mm deep — exactly where standard blades give up. Most 20-piece sets are a pile of the same blade repeated.Check price on Amazon
PETOX 159PCS Oscillating Saw Blades with Sandpaper
Cut and Sand ComboPETOX 159PCS Oscillating Saw Blades with Sandpaper4.5+★900+ ratingsTriple ground Japanese teeth for the cut that has to look finished. If your oscillating tool work is mostly visible — a door frame, a floor plank, a piece of trim going back on — the tooth geometry is what you are paying for.Check price on Amazon

How To Choose The Best Ryobi Oscillating Tool Blades

The first thing to settle is your mount, because no amount of good steel saves a blade that won’t lock onto your tool. Ryobi oscillating multi-tools use a standard blade mounting interface, and nearly every set here is built around that universal system. A few listings explicitly warn they will not fit Starlock, Starlock Plus or Starlock Max systems — so if your tool is a Starlock machine, these are not your blades.

Check the mount before anything else

A universal interface means the blade has slotted holes that line up with the pins on most multi-tools, and most kits throw in two or three adapters to cover the odd shapes. That is what lets one set claim compatibility with DeWalt, Milwaukee, Ryobi, Makita and a dozen other brands at once. The sets here that include adapters are the safer bet if you own more than one oscillating tool, because you can move blades between them.

Match blade width and depth to the cut

Width decides how much material you remove per pass, and depth decides how far into a pocket you can reach. Narrow blades in the 34mm range are the ones for plunge cuts and tight corners, while a 68mm blade clears wide stock in a single pass so you make fewer cuts overall. Deep-reach blades, like the 44mm x 70mm pair in the LEILUO set, get you into recessed framing and PVC where a standard blade bottoms out.

Understand what the coating buys you

Titanium coating on the cutting edge is there to resist heat and wear, which is what keeps teeth sharp through metal and nails rather than just softwood. High-temperature quenching is a heat-treatment step that hardens the steel so it holds an edge under load. Both are real, but neither turns a consumable blade into a permanent one — expect to burn through blades on nail-embedded lumber no matter what the box says.

Count the blades you’ll actually use

A 159-piece kit and a 20-piece kit can contain a similar number of actual saw blades, because sandpaper pads and discs pad the count fast. Look at how many cutting blades sit in the box and what type they are — wood, bi-metal, titanium, curved-edge — rather than the headline number. If you cut mostly wood trim, a set heavy on curved-edge wood blades serves you better than one with a wide spread of exotic blades you’ll never mount.

Side-by-Side Comparison

Model Best For Pieces Blade Material Mount Amazon
AIFCUT 55 PCS Oscillating Saw Blades★ Best Overall All-round home and workshop set 55 Metal Universal, fits Ryobi Amazon
LEILUO 20Pcs Titanium Oscillating Tool BladeDeep Reach Pick Deep-reach and wide cut-outs 20 Titanium coated edge Standard, fits Ryobi Amazon
Trivd Frol 121 PCS Oscillating Saw BladesCut and Sand Combo Clean cuts in wood and trim 121 High carbon steel, bi-metal, titanium Universal, fits Ryobi Amazon
EXKRAEFT 136 PCS Multi Tool Blades Kit Sanding corners and fine trim 136 High carbon steel and titanium Universal with 3 adapters Amazon
EXKRAEFT 50PCS Curved Edge and Titanium Set Wood-heavy remodeling work 50 Titanium coated and curved-edge Universal with 3 adapters Amazon
Diagtree 20PCS Titanium Oscillating Saw Blades Metal, nails and pipe cutting 20 Titanium Universal with 3 adapters Amazon
RYOBI 16-Piece Oscillating Multi-Tool Accessory Kit Ryobi-native fitment with a case 16 High carbon steel Ryobi specialized fitment, no adapter Amazon

Detailed Reviews

★ Best Overall

1. AIFICUT 55 PCS Oscillating Saw Blades

Our pick — 4.5+★ from 950+ verified ratings; the strongest balance of quality and price.

Fits 25+ tool brandsQuick-release swap

A 55-piece kit that swallows a whole weekend of remodeling without a second order.

This is the set to buy if you own one oscillating tool and want a box that covers cutting, grinding and scraping without thinking about it again for months. The 55 blades span wood, plastic and metal work, and the listing’s compatibility list runs from DeWalt and Porter Cable to Rockwell, Milwaukee, Makita and Ryobi — which is why it sits at the top of this list. Weighing in at 1.22 kg, it is the heaviest kit here, and that weight is simply more steel in the tin: it measures 2.3x the 0.53 kg of the LEILUO 20-piece set.

The blade interface is the standard slotted type, so swapping a blade takes seconds and no extra tool, and that matters on a job where you are switching between a plunge cut in drywall and a trim cut in oak every few minutes. What wins people over is the value — two thirds of the way through a deck rebuild you are still pulling fresh blades out of the case rather than driving to the store. Owners put it plainly: the blades “hold up longer than expected.” They do bog down in heavy continuous cutting, and the mix leans light on dedicated metal blades, so plan a separate metal set if pipe and nail work is your main diet.

quick release arbor

  • 55 blades across wood, plastic and metal in one kit
  • Standard interface fits Ryobi and 24 other listed brands with no adapter
  • Quick blade changes in seconds, no extra tools
  • Quality and value are what the review pages keep coming back to

blade count patience

  • Heavy continuous cutting wears teeth faster than light trim work
  • Thin on dedicated metal-cutting blades compared with the wood mix
  • At 1.22 kg it takes real shelf or drawer space

bulk starter set: you want one box that handles home repair, renovation and craft cutting on a Ryobi tool.

needs fewer blades: your work is mostly metal pipe and nails — the Diagtree set is built around that job instead.

Deep Reach Pick

2. LEILUO 20Pcs Titanium Oscillating Tool Blade Set

70mm extra-long bladesTitanium coated edge

Two blades here reach 70mm deep — exactly where standard blades give up.

Most 20-piece sets are a pile of the same blade repeated. This one is laid out by width and depth: 10 blades at 34mm with 40mm depth, 6 at 44mm with 55mm depth, 2 at 68mm with 55mm depth, and 2 extra-long 44mm blades with 70mm depth, plus 3 adapters. That 68mm pair is the wide-stock answer, clearing large cut-outs in one pass so a job that would take three narrow passes takes one. The 70mm deep pair is the one that gets into recessed framing and PVC pockets. At 0.53 kg it is the lightest kit on this list, so it drops into a tool bag without dragging on your shoulder.

The titanium coating sits on the cutting edge to resist heat and wear, which is what keeps teeth working longer through soft metal, aluminium, copper pipe, hardwood, plywood and common nails. Fit is the standard mount, and it is listed for DeWalt, Milwaukee, Ryobi, Makita and Dremel. The one thing to check before ordering is the warning in the listing itself: these do not fit Starlock, Starlock Plus or Starlock Max systems. If your tool is Starlock, this set is not for you, simple as that.

titanium coated edges: 70mm of reach turns a stuck blade into a finished plunge cut in drywall, PVC or recessed framing, and the 68mm width means fewer passes on wide stock.

light duty pick: remodelers who keep hitting pockets a standard blade cannot reach.

heavy cutting ahead: your oscillating tool runs a Starlock system — this set will not mount.

Cut and Sand Combo

3. PETOX 159PCS Oscillating Saw Blades with Sandpaper

39 blades plus 120 sanding padsPrecision scales on

Triple ground Japanese teeth for the cut that has to look finished.

If your oscillating tool work is mostly visible — a door frame, a floor plank, a piece of trim going back on — the tooth geometry is what you are paying for. The triple ground Japanese teeth here are shaped for a clean surface in wood, and the curved edge keeps the blade tracking steady while it works. There are 10 blade types in the box, from HCS and bi-metal pieces to curved-edge Japanese-tooth blades, semi-circular blades and a stainless steel curved blade, plus sand tray, sandpaper and three adapters.

Titanium carbide on the sawtooth is the wear layer, and the maker claims over 50% more hardness and 2x the service life of ordinary blades — manufacturer figures, not measured ones. The steel underneath is alloy steel, high carbon steel, bi-metal and stainless, all quenched repeatedly. The set is 1.02 kg, close to the AIFICUT but noticeably lighter in handling than a big sandpaper-heavy box.

The recurring note is that longevity varies by what you cut — soft woods and plastics are where it shines, and long sessions in harder material dull teeth sooner. What sets this one apart is the finish quality on wood.

big all rounder: finish carpentry, trim and flooring where a ragged cut would show.

small job only: your priority is metal cutting — the titanium set below is aimed at that.

Sanding Specialist

4. EXKRAEFT 136 PCS Multi Tool Blades Kit with Sandpaper

100 sandpaper sheetsTwo stainless scrapers

A hundred sheets of sandpaper and two scrapers — this is the detail-work kit.

Count the contents and you see where the 136 pieces go: 10 blade types, 2 stainless steel scrapers, 3 pads, 2 sand tray types and 100 sandpapers. That is a set built for the ugly corners — the odd angle behind a radiator, the fancy trim profile nobody makes a block for. The curved edge design is the same idea as elsewhere: a better cutting angle through the stroke, less vibration, more stability. The long wavy tooth is shaped for faster, cleaner cuts in wood and plastic.

Steel is thick gauge high carbon steel and bimetallic alloy steel, treated for wear resistance. The quality is what the review pages land on hardest — this one regularly gets compared favorably to the big-brand blades. It is also light at 0.92 kg, so it lives in a tool bag without complaint. Three clips adapters cover Bosch, Fein, Milwaukee, Ryobi, Hitachi, Black & Decker, Chicago, Craftsman, Dremel and Rockwell, with the listing claiming compatibility with more than 98% of oscillating tools on the market.

Durability is the mixed part — the blades that survive a sanding session and a trim cut are great, but teeth do dull on hard runs, and sharpness fades on the finer teeth. The listing is also clear that this set is not meant for screws and bolts. Sanding where a blade has no business is where these sets fail.

wide blade variety: 100 sandpapers plus two scrapers make this the kit for restoring trim and reaching into awkward corners rather than for demolition.

serious hobby kit: restoration and detail sanding on Ryobi tools.

occasional user: you need heavy demolition blades — this box is weighted toward finesse.

Wood Workhorse

5. EXKRAEFT 50PCS Oscillating Tool Blade Set

45 curved-edge wood blades5 titanium 1-3/4″ blades

Forty-five wood blades and five titanium cutters — built for one material, done well.

This is the most single-minded kit here, and that is its strength. The 50 pieces split into 5 titanium 1-3/4″ oscillating blades for the hard stuff and 45 curved-edge 1-3/4″ blades for wood, plastics, drywall and construction materials. If your Ryobi oscillating tool spends its life on door frames, flooring and nail-embedded wood, you will get through the wood blades long before you wish for more variety. The curved edge holds the cutting angle through the vibration, which reduces chatter and keeps the line straight.

The 5 titanium blades target tough metals and hard materials, with the maker claiming 50% greater hardness and 2X the lifespan of ordinary blades. Those are claims, not measured figures, so judge them by how the blades hold up on your own jobs. Sharpness is where this set earns its keep — teeth stay biting for a long run, which is why the word that keeps coming up is simply durability.

The universal interface comes with 3 clip adapters and fits DeWalt, Bosch, Fein, Milwaukee and Ryobi, with the listing claiming compatibility with over 98% of oscillating tools. Note again the warning: not suitable for cutting screws and bolts. Feed it something it was not built for and it will let you know.

flush cut tasks: wood-heavy remodelers who burn through blades on trim and framing.

straight cuts needed: anyone expecting a broad multi-material spread — this kit leans hard into wood.

Metal Cutter

6. Diagtree 20PCS Titanium Oscillating Saw Blades

Cuts nails and copper pipeQuick-change, no tools

Twenty titanium blades for the nails, copper pipe and aluminium nobody else enjoys.

Where the EXKRAEFT kit above is all wood, this one points at metal. The 20 pieces are 10 blades at 1-3/8″ inches, 10 at 1-3/4″ inches and 3 adapters, all titanium. The titanium resists heat and wear, which keeps teeth alive in a nail or copper pipe, and the maker claims 50% greater hardness and 2X the service life of ordinary bi-metal blades. At 0.47 kg it is the lightest set in the round-up, so a spare blade lives in a pocket rather than a toolbox.

The quick-change design is the bit that changes how the tool feels to use: blades swap in seconds with no extra tool, and they lock in firmly enough to stop the wobble that makes a plunge cut wander. Fit covers the usual crowd — DeWalt, Worx, Rockwell, Wen, Milwaukee, Bosch, Craftsman, Makita, Ryobi, Fein, Chicago, Porter Cable — with 3 adapters, though the listing warns again that Starlock systems are not supported.

Expect the lifespan to be the inconsistent part. Some sets cut clean through steel and hold their edge; others give up at the spot weld before the teeth are even dull. That is the nature of titanium-coated consumables in this price band, and it is why buying 20 rather than 5 makes sense.

awkward cut shape: nails in corners and small copper or aluminium pipe are exactly the jobs this blade shape was designed for.

tight corner work: you are cutting nails, pipe and aluminium sheet and want blades that stay sharp in heat.

long runs ahead: your tool takes Starlock blades.

Brand-Matched Pick

7. RYOBI 16-Piece Oscillating Multi-Tool Accessory Kit

No adapter neededStorage case included

The only kit here with a Ryobi-specific fitment and a case to carry it in.

Sixteen pieces is a small number next to a 159-piece box, but every one of them is a blade for a named job. The kit covers wood, metal, plastic, tile, grout, fiberglass, drywall, masonry and concrete — a spread none of the third-party sets attempts. The specialized fitment means it mounts to most multi-tools with no adapter in the way, which is the argument for buying the maker’s own set over a lookalike. The wood plunge cut blade is premium high carbon steel, with a maker claim of 35% faster cutting than the standard blade.

What you are paying for here is certainty and organization. No adapter to lose, no guessing whether the mount lines up, and a storage case that keeps 16 blades sorted instead of rattling loose in a drawer. Quality is the aspect that carries the most weight across the reviews, and the variety of pieces is what buyers return to — a genuinely complete set rather than a pile of duplicates.

The honest limit is count. Sixteen blades go fast on a big project, and replacing them individually costs more per blade than a bulk box of 50. This is the set you keep topped up and cared for, not the set you burn through on demolition day.

one tool owner: you want the maker’s own fitment, a case, and blades for tile, grout and masonry in one purchase.

need many spares: volume matters more than brand-matched fitment.

Know the Specs

Universal interface vs. Starlock

A universal interface is the slotted hole pattern that lines up with the pins on most oscillating tools, and it is what lets one blade fit DeWalt, Ryobi, Milwaukee and a dozen other brands. Starlock is a different, tool-specific mounting system — blades built for it will not work on a universal mount, and universal blades will not work on a Starlock tool. Check your tool’s mount before you order, because nearly every kit in this round-up explicitly excludes Starlock systems.

Titanium coating explained

Titanium coating is a thin layer on the cutting edge that resists heat and wear, and it is what keeps teeth sharp longer when you are cutting metal or hitting nails. It does not make a blade permanent, and the “50% harder” and “2X service life” figures printed on the boxes are manufacturer claims rather than measured results. What you can rely on is the geometry: a coated edge holds up longer than a bare one, and buying blades in bulk is still the sensible way to work through the job.

Blade width and depth

Width sets how much material goes per pass, and depth sets how far into a pocket you can reach. Narrow 34mm blades are the ones for plunge cuts and tight corners, while 68mm blades clear wide stock in a single pass. Extra-long depth blades — the 44mm x 70mm pair in the LEILUO set, for example — get you into recessed framing and PVC where a standard blade bottoms out. Match both to the job rather than buying the biggest blade in the box.

High-temperature quenching

Quenching is a heat-treatment step: the steel is heated and then cooled fast to harden it, which is what gives a tooth its bite and its wear resistance. Several of these sets run their steel through the process repeatedly. It is a real difference in how the edge holds up, but it is an industrial process used across the category — what separates the kits is how consistently it is applied, which is exactly where the customer feedback splits.

Common Questions

Will these blades fit my Ryobi oscillating multi-tool without an adapter?
In most cases, yes. Ryobi oscillating multi-tools use a standard blade mounting interface, and the sets here are built around a universal system that lines up with it. Several kits — the AIFICUT 55-piece, LEILUO, TrivdPro, Diagtree and the RYOBI 16-piece — list Ryobi explicitly as a compatible brand. The RYOBI 16-piece set is the one that mounts with no adapter at all. If you are unsure, check the pin pattern on your tool against the blade’s slotted holes before ordering.
Do these blades work with Starlock tools?
No. Starlock, Starlock Plus and Starlock Max are a separate mounting system, and several listings here state plainly that they do not fit. The LEILUO 20-piece and Diagtree 20-piece both carry the Starlock exclusion. If your tool runs Starlock, you need blades designed for that system.
How many blades do I actually get in a 159-piece kit?
In the PETOX 159-piece set, 39 pieces are saw blades and 120 are sandpaper pads in 5 grits and 2 disc sizes, plus 3 adapters. That split is common across the larger kits — sandpaper pads and discs pad the headline count, so look at the number of cutting blades rather than the total. In the EXKRAEFT 136-piece set, for comparison, 100 of the pieces are sandpaper sheets.
What materials can these oscillating blades cut?
The sets here cut wood, plastic, metal, drywall, PVC, copper pipe, aluminium, fiberglass and masonry, depending on the blade type. The RYOBI 16-piece set goes further than most, listing tile, grout, fiberglass, drywall, masonry and concrete. Titanium blades are aimed at metal and nails, while curved-edge blades are shaped for fast, clean wood work. Feed the right blade to the right material.
Why do my blades wear out so fast on nails and screws?
Nails and screws are hardened steel, and hardened steel is the hardest thing an oscillating blade will ever meet. Several listings here warn explicitly against cutting screws and bolts — the TrivdPro, Trivd Frol EXKRAEFT kits among them. Continuing to grind a blade into a screw dulls the teeth fast and can break the blade. Slow down, use the metal blade, and let the tool do the work.
Is titanium really worth the extra over plain bi-metal blades?
Titanium coating is real and it does help on metal cutting and heat, which is why the metal-focused sets are built around it. The 50% hardness and 2X service-life claims are manufacturer figures, so expect a real gain over bare steel without assuming double the life. On softwood and plastic trim, a sharp curved-edge wood blade does the job regardless of coating.
Can I use these blades to cut drywall and plaster?
Yes. Drywall is one of the common jobs these blades handle, and several sets list drywall and plaster along with wood and plastic. The LEILUO 20-piece set specifically points to its extra-long 70mm blades for plunge cuts in drywall and PVC. Use a narrower blade for tight cut-outs and a wider one for big openings.
How often should I change an oscillating blade?
Change it when the cut starts to wander or needs more pressure to keep going. A blade that no longer tracks a straight line or leaves a ragged edge in wood is past its best, and that arrives much sooner in nail-embedded lumber than in clean softwood. Because lifespans are so inconsistent, buying blades in larger sets — 50 or 55 pieces rather than 16 — means you have a fresh blade on hand at the moment you need it.
Will one set fit both my Ryobi tool and my DeWalt or Milwaukee tool?
Yes on the universal-mount kits. The AIFICUT 55-piece, LEILUO, PETOX, TrivdPro, Trivd Frol, EXKRAEFT and Diagtree sets are all built around a universal interface and list DeWalt, Milwaukee and Ryobi together. Several include 3 adapters so you can move blades between different tools. The RYOBI 16-piece set is the specialized-fitment exception — it is aimed at Ryobi-style mounts.
Do the wider 68mm blades make a difference on large cut-outs?
Yes, on wide stock. The LEILUO 20-piece set includes 2 blades at 68mm with 55mm depth, and their job is to cut wide stock and large cut-outs in one pass rather than three narrow passes. That saves time and produces a straighter edge on big openings. For tight corners and plunge cuts, drop back to the 34mm blades.

The Bottom Line

For most Ryobi owners, the ryobi oscillating tool blades decision lands on the AIFCUT 55 PCS kit, because 55 blades across wood, plastic and metal fit a standard Ryobi mount with no adapter and keep a whole remodel supplied. If you want a set built around deep and wide cuts, the LEILUO 20-piece reaches 70mm where standard blades stop. And for the one purchase where the maker’s own fitment and a case matter most, the RYOBI 16-piece kit is the one to reach for.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top