9 Best Truck Lowering Kits | 2 Inches Or 7, Fitment Decides

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The hardest part of lowering a truck is not picking a drop number — it is buying a kit that actually bolts to your cab style, brake rotor thickness, and wheel size without surprises. Most of these kits are vehicle-specific, which means a single cab-versus-extended-cab mix-up can leave you with parts that never fit. Below you will find nine real lowering kits sorted by how much drop they deliver, how complete the box is, and who each one actually bolts onto.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

A lowering kit is a matched set of spindles, springs, flip kits, and shocks that must agree with each other. Read on for the truck lowering kits that earn their place on real fitment data.

Top Picks

maXpeedingrods 2” Rear Lowering Springs for Dodge Ram 1500 2009-2018
Best OverallmaXpeedingrods 2” Rear Lowering Springs4.5+★20+ ratingsTwo springs, one rear drop, and a spring rate you can actually read off the spec sheet. If your Ram 1500 only needs the rear 2″ down, this rear-only spring pair does it without touching the front.Check price on Amazon
2' Drop Spindle Lowering Kit for GMC C1500 1988-1998 C2500 2WD Extended Cab
Geometry Keeper2″ Drop Spindle Lowering Kit4.0+★20+ ratingsThe 2″ drop that keeps your factory geometry instead of fighting it. Spindles are the smart route for a 2″ drop because they lower the wheel without shortening the spring.Check price on Amazon
Rough Country 2' Front 4' Rear Lowering Kit for 07-15 Chevy/GMC 1500 2WD - 72330
Level StanceRough Country 2″ Front 4″ Rear Lowering Kit4.0+★60+ ratingsA matched front-and-rear drop with a lifetime replacement warranty behind it. For a 2007-2015 Chevy or GMC 1500 in 2WD, this Rough Country box drops the front 2″ and the rear 4″ to 4.5″.Check price on Amazon

How To Choose The Best Truck Lowering Kits

Fitment comes before everything else. A kit that bolts cleanly to your exact year, cab style, and drive type will ride well even if it is simple. A kit with gorgeous hardware that does not match your truck is scrap metal in a box.

Start with your cab style and brake rotor thickness

Spindle-based kits are the pickiest. On the Youxmoto GMC spindle kit, 1988-1991 Regular Cab trucks are explicitly excluded, and the spindles only fit trucks running 1.25″ thick front brake rotors. Measure your rotors and confirm your cab before you order anything with a spindle in the box.

Decide how much drop you actually want

Front drop and rear drop are listed separately, and the gap between them changes the stance. The RTZ 88-98 kit runs 5″ front and 7″ rear. The Belltech 795SP runs 1.5″ front and 3″ rear. Neither drop is better — a 5″/7″ RTZ kit and a 1.5″/3″ Belltech kit suit different trucks and different drivers.

Check whether the kit is bolt-on or needs a frame notch

Deep rear drops often require notching the frame for clearance. The RTZ kits explicitly call out required frame notching. If you are not cutting into your frame, stay with a shallower spring-and-spindle setup.

Side-by-Side Comparison

Model Best For Front Drop Rear Drop Type Amazon
maXpeedingrods 2” Rear Lowering Springs Ram 1500 owners who only want the back down — 2 in Rear coil springs Amazon
Youxmoto 2″ Drop Spindle Kit 88-98 GMC/Chevy extended cabs keeping factory ride 2 in — Drop spindles Amazon
Rough Country 72330 07-15 Chevy/GMC 1500 2WD on a matched kit 2 in 4 in Spacer + hanger kit Amazon
Belltech 964ND 09-13 Ram 1500 standard cab with Nitro Drop 2 shocks 2 in 4 in Spring + shock kit Amazon
Belltech 795SP Anyone wanting a mild, all-in-one Box drop 1.5 in 3 in Spring + strut + shock kit Amazon
RTZ 88-98 Silverado Kit 88-98 Silverado/Sierra 2WD V8 going low 5 in 7 in Spindle + spring + flip kit Amazon
RTZ 99-06 Silverado Kit 99-06 Silverado/Sierra 2WD V8, same drop package 5 in 7 in Spindle + spring + flip kit Amazon

Detailed Reviews

Best Overall

1. maXpeedingrods 2” Rear Lowering Springs

2″ Rear DropRam 1500 + Classic

Two springs, one rear drop, and a spring rate you can actually read off the spec sheet.

If your Ram 1500 only needs the rear 2″ down, this rear-only spring pair does it without touching the front. The pair drops the rear 2″ and fits Ram 1500 RWD and 4WD from 2009-2018, plus Ram 1500 Classic RWD and 4WD from 2019-2024. That range covers a lot of trucks with one part number.

The spec worth reading is spring rate: 4kg/mm, which is 223.98lb/in in the same listing. Spring rate is how much force the coil pushes back per inch of travel, and a published number like that tells you the ride stays firm rather than sagging soft. Spring length is listed at 394mm, or 15.51″. The pair weighs 18.96 pounds total.

Where this kit lands is about completeness versus cost. It is a rear-only spring set, so your front stays at factory height and you supply nothing else. At 4.5+ stars from a modest pool of owners, the satisfaction is high on a small sample. For a Ram owner chasing a raked look without touching the front end, a 2″ rear drop delivers it.

What the spec sheet backs up

  • Published 4kg/mm (223.98lb/in) spring rate — a real number, not a vague “sport” claim
  • Fits both Ram 1500 2009-2018 and Ram 1500 Classic 2019-2024, RWD and 4WD
  • High-quality steel construction with a 1-year limited warranty on quality issues
  • 18.96 pounds for the pair — light enough to handle and ship easily

Where it stops short

  • Rear only — no front springs, spindles, or shocks in the box
  • You must pair it with your own front-end plan or accept a rear-only drop

Reach for this if: you own a Ram 1500 or Ram 1500 Classic and only want the rear end brought down 2″.

Think twice if: you want a matched front-and-rear drop from a single purchase — this kit is deliberately rear-only.

Geometry Keeper

2. 2″ Drop Spindle Lowering Kit

Ductile Iron SpindlesExtended Cab Only

The 2″ drop that keeps your factory geometry instead of fighting it.

Spindles are the smart route for a 2″ drop because they lower the wheel without shortening the spring. That means your suspension travel stays put. This Youxmoto kit drops the front 2″ and the listing states it maintains critical suspension geometry while eliminating the excessive ball joint, shock, and tire wear common to other lowering methods.

Each spindle is cast from high-strength ductile iron, which is a tough, forgiving metal that resists cracking under load. The set weighs 46.6 pounds, so it is a two-hand lift, not a one-arm carry. A 12-month warranty backs it.

Here is the catch, and it is a real one. These will not fit 1988-1991 Regular Cab trucks — the cab must be an Extended Cab. They also only fit trucks with 1.25″ thick front brake rotors. Compatibility reaches 1988-1998 C1500 and C2500, 1992-1999 Suburban, and 1995-1999 Tahoe and Yukon. At 4.0+ stars from a small batch of owners, it is a solid-but-not-beloved kit — likely because fitment errors happen when buyers skip the cab-style check.

Why spindles win: you get a 2″ front drop with your factory springs, shocks, and ride quality left intact.

The fitment tax: measure your rotor thickness at 1.25″ and confirm Extended Cab before ordering, or the box goes back.

The right buyer: an 88-98 GMC or Chevy Extended Cab owner who wants a clean 2″ front drop and no change in ride.

The wrong buyer: Regular Cab 1988-1991 owners and anyone with thinner front rotors — this spindle simply will not seat.

Level Stance

3. Rough Country 2″ Front 4″ Rear Lowering Kit

2″ Front / 4″ RearN3 Performance Shocks

A matched front-and-rear drop with a lifetime replacement warranty behind it.

For a 2007-2015 Chevy or GMC 1500 in 2WD, this Rough Country box drops the front 2″ and the rear 4″ to 4.5″. The rear drop is adjustable between 4″ and 4.5″, which gives you a small tuning window most kits in this range do not offer.

The hardware is the quiet story. You get Grade 9 hardware and hardened washers, plus N3 Performance Rear Shocks, axle saddles, U-bolts, lowering spacers, cam plates, and a spring hanger bracket. Grade 9 is a high-strength bolt class, which matters on suspension parts that see constant load. The material is alloy steel, and Rough Country backs it with a Limited Lifetime Replacement Warranty.

The honest trade-off is the rating. At 4.0+ stars from a reasonably sized pool, this is a capable kit rather than a beloved one. Its rear drop is fixed between 4″ and 4.5″, so if you wanted a shallower stance or a deeper one, this is not your kit. But for the 07-15 2WD owner who wants both ends down and a warranty that replaces rather than repairs, it earns its place here.

Built for: the 07-15 Chevy/GMC 1500 2WD owner who wants a matched 2″/4″ drop with adjustable rear height and N3 shocks included.

Skip past if: your truck is 4WD or outside that year range — this is a vehicle-specific kit and will not adapt.

Shock Matched

4. Belltech 796SP Lowering Kit with Street Performance Shocks

3″ Rear Drop SpringsStreet Performance Shock<>

A four-shock, four-spring Ram kit built for the 09-13 standard cab.

This is a full front-and-rear package for the 2009-2013 Dodge Ram 1500 Standard Cab. The heading says it plainly: 2″ front / 4″ rear drop with Nitro Drop II shocks. Inside you get the 4762 2″ Front Drop Springs, the 5317 4″ Rear Drop Springs, an 8000 Front Nitro Drop 2 shock, and an 8504 Rear Nitro Drop 2 shock.

Four shocks and four springs is the full job in one box. The 70-pound ship weight tells you it is a complete system, not a partial fix. Both the springs and the shocks are listed, so damping and drop are designed together. The warranty is a Limited Lifetime on the kit with a 2 Year Limited Warranty on the shocks.

The honest note is ride quality. Quality and installation are what buyers talk about most positively in this listing, but ride quality is the recurring mixed point — several buyers report wobble. That is not a reason to walk away from a full kit at this spec level; it is a reason to check your alignment and torque after install. If you own an 09-13 Ram standard cab and want the whole job in one box, this is a serious option.

Strength to count on: four springs and four Nitro Drop 2 shocks means nothing is left out of the drop.

The known gripe: ride-quality feedback is mixed, with wobble the recurring theme — budget for a proper alignment after install.

Suits you if: you drive a 2009-2013 Ram 1500 standard cab and want springs plus Nitro Drop 2 shocks from one manufacturer.

Look elsewhere if: your Ram is a different cab or year — this kit is pinned to the standard cab.

Mild Drop Pick

5. Belltech 795SP Lowering Kit with Street Performance Shocks

1.5″ Front Drop3″ Rear Drop

A 1.5″ front and 3″ rear drop for the driver who wants subtle, not slammed.

Most lowering kits here push you toward an aggressive stance. This one goes the other way. The 795SP drops the front 1.5″ and the rear 3″ — the mildest drop numbers of any full kit here. Compared with the RTZ 88-98 kit’s 5″ front and 7″ rear, that is a hugely different truck. If “slammed” is not your word, this is your kit.

The pieces are the 4207 1.5″ Front Drop Springs, the 4230 3″ Rear Drop Springs, the 25011 Front Lift & Lowering Strut, and the 2210DG Rear Street Performance shock. The material is alloy steel, the kit weighs 60 pounds, and Belltech’s Maximum Lifting Height spec is listed at 1.5 inches, matching the front spring figure. Warranty is a Limited Lifetime with a 2 Year Limited Warranty on the shocks.

Why this sits high in this list is the combination of mild drop and full matching. At 4.5+ stars on a small pool, this is one of the better-regarded complete kits here. The trade-off pairs with the strength: 1.5″ is a modest front drop, so if you want to visibly change the truck’s front profile, this is not the aggressive option.

The right application: a driver who wants a subtle 1.5″ front and 3″ rear drop with matched springs, strut, and Street Performance shock.

The wrong goal: you want a deep, low stance — 1.5″ front is intentionally mild.

Deep Drop Kit

6. Silverado Sierra 1500 Lowering Kit 88-98

5″ Front / 7″ RearFrame Notch Required

The full kit for the 88-98 Silverado that wants to sit on the ground.

You get the deepest drop in this guide, and it comes with a big parts list: a pair of 2″ lowering spindles (the metal arms that hold the wheel hub), front 3″ lowering coil springs, a rear axle flip kit (moves the axle above the leaf springs), a frame notch kit (a cut-out piece for chassis clearance), a pair of shackles (links that connect the leaf spring to the frame), and a set of Doestch Premium Lowered Nitrogen Gas Charged shocks (dampers filled with nitrogen gas). That adds up to 5″ of front drop and 7″ of rear drop on a 2WD V8.

The numbers say this kit is heavy metal. At 133 pounds it arrives as a freight-scale box, and the Maximum Lifting Height spec reads 7 inches. For scale, the Belltech 795SP lists 1.5 inches for the same field — the RTZ is in a completely different drop class. It ships with a Limited Lifetime Warranty, and the build is rolled steel welded and CNC lasered, with ductile iron forming, a chromoly shaft precision machined, and powder coating to prevent corrosion.

The big catch is the frame. The listing says plainly: “Primarily Bolt-on installation with required notching of the frame for clearance to lower down to the ground.” Frame notching means cutting into the chassis (the truck’s main structural frame), so unless you are comfortable doing that or paying a shop, choose a smaller drop. You also must run 17″ or larger rims (wheel diameters). Buyers praise quality most in this listing, and fit comes second. If you own an 88-98 Silverado and are ready to notch the frame, this kit gives you a complete deep-drop package.

Reasons it earns the space

  • The deepest drop in this guide — 5″ front and 7″ rear on a 2WD V8
  • Complete package: spindles, coil springs, flip kit, frame notch kit, shackles, and Doestch shocks
  • Powder-coated, welded, CNC-lasered build with a Limited Lifetime Warranty

What it demands of you

  • Requires notching the frame for clearance — not a no-cut install
  • Must run 17″ or larger rims
  • 133 pounds — plan for two people to move the box

Go deep with this if: you own an 88-98 Silverado/Sierra 2WD V8 and are ready to notch the frame for a 5″ front, 7″ rear drop.

Pass on it if: you will not cut into your frame or you run wheels smaller than 17″.

Newer Silverado

7. Silverado Sierra 1500 Lowering Kit 99-06

99-06 Fitment5″ Front / 7″ Rear

Same deep STI drop as the 88-98 kit, retuned for the 1999-2006 body.

The 99-06 Silverado and Sierra 1500 2WD V8 gets the same treatment as the earlier truck: 5″ front drop and 7″ rear drop. The Maximum Lifting Height spec is 7 inches, and the kit weight is 133 pounds. This is RTZ’s answer to the guy who bought a newer truck but wants the earlier kit’s aggressive profile.

The parts list matches the drop. You get 5″ front drop spindles and coil springs, a 7″ rear flip kit, and a set of Doestch Tech Premium Nitro Shocks. The build uses rolled steel welded and CNC lasered, with ductile iron forming, a precision-machined chromoly shaft, and powder coating to prevent corrosion. Backed by a Limited Lifetime Warranty.

The same real constraint applies here: “Primarily Bolt-on installation with required notching of the frame for clearance to lower down to the ground.” If you have notched a frame before, it is a known job. If not, plan for a shop. Compared with the earlier RTZ kit, this one holds a slightly lower 4.0+ stars on a smaller pool, so the satisfaction is more measured. For the 99-06 owner who wants this specific drop and will do the notch, it fits the bill.

Why owners pick it: a complete 5″/7″ drop package for the 1999-2006 body, with spindles, springs, flip kit, and Doestch shocks all in one box.

The real cost: frame notching is required, and wheels must be 17″ or larger.

Built for you if: your truck is a 1999-2006 Silverado/Sierra 1500 2WD V8 and you want the deepest matched drop for that body.

Keep looking if: you are not prepared to notch the frame or upgrade to 17″ rims.

Know the Specs

Front Drop vs. Rear Drop

These are listed separately because they do different jobs. The front drop is how far the nose comes down; the rear drop is how far the tail comes down. A kit at 2″ front and 4″ rear sits differently from one at 5″ front and 7″ rear. Read both numbers together, not just the headline drop.

Spring Rate

Spring rate is how much force a coil pushes back per inch of travel, listed in lb/in or kg/mm. A published number like 223.98lb/in tells you how firm the ride will sit. A spring with a real rate holds its height instead of sagging — that is the difference between a drop and a collapse.

Drop Spindles

A spindle lowers the wheel without shortening the spring, so your suspension travel and geometry stay put. That is why spindle-based kits are favored for mild drops. The trade-off is fitment strictness — rotor thickness and cab style both matter.

Flip Kits and Frame Notching

A rear axle flip kit repositions the axle above the leaf springs for a deep drop. On deep kits, the axle sits so close to the frame that notching is required for clearance. If a listing says notching is required, it is a cutting job, not a pure bolt-on.

Common Questions

Will a 2″ drop spindle kit change my factory ride quality?
A spindle lowers the wheel by moving the mounting point rather than compressing the spring, so your suspension travel is preserved. Youxmoto’s listing states its spindles maintain critical suspension geometry and retain factory ride quality. Ride quality still depends on your shocks and alignment being in good shape.
How do I know if my truck needs a frame notch for a lowering kit?
The listing tells you. The RTZ 88-98 and 99-06 kits state plainly that frame notching is required for clearance to lower down to the ground. If you see that language, it is a cutting job. If you are not comfortable cutting into the frame, choose a shallower kit like the Belltech 795SP at 1.5″ front and 3″ rear.
What does spring rate mean on a lowering spring?
Spring rate is how much force the coil pushes back per inch of travel. The maXpeedingrods Ram springs list 4kg/mm, which is 223.98lb/in. A published number lets you compare firmness directly instead of guessing from a “sport” label on the box.
Can I lower just the rear of my Ram 1500 and leave the front alone?
Yes, if you buy a rear-only kit. The maXpeedingrods pair drops only the rear by 2″ and fits Ram 1500 2009-2018 plus Ram 1500 Classic 2019-2024, in both RWD and 4WD. It contains two rear coil springs and nothing else, so your front end stays at factory height.
Why do some drop spindle kits exclude Regular Cab trucks?
Because the spindle’s geometry is built around a specific front-end setup. The Youxmoto 2″ spindle kit explicitly will not fit 1988-1991 Regular Cab trucks and requires an Extended Cab. It also only fits trucks with 1.25″ thick front brake rotors. Confirm both before you order.
Will a lowering kit fit my truck if it is 4WD?
Only if the listing says so. The maXpeedingrods rear springs cover both RWD and 4WD on the Ram 1500. The Rough Country 72330 is specific to 07-15 Chevy/GMC 1500 2WD. The RTZ kits are built for 2WD V8 trucks. Always match the drive type on the listing before buying.
What is the difference between a drop spindle and a drop spring?
A drop spindle lowers the wheel without shortening the spring, preserving travel and geometry. A drop spring lowers the truck by compressing the suspension’s resting height. Many complete kits combine both — the Belltech 753SP uses 2″ front spindles paired with 3″ or 4″ rear drop springs for that reason.
Do I need larger wheels after a deep lowering kit?
Sometimes the listing requires it. The RTZ 88-98 kit states you must run 17″ or larger rims. That is a fitment requirement tied to the spindle and brake clearance, not a style suggestion — smaller wheels can physically interfere.
Does a lowering kit include new shocks?
It depends. The Belltech 964ND includes four Nitro Drop 2 shocks, the Belltech 795SP includes a Street Performance rear shock and a front strut, and the RTZ kits include Doestch Tech Premium Nitro Shocks. The maXpeedingrods rear springs do not include shocks, so you will reuse or replace your own.
Can a lowering kit lower the truck unevenly front to rear?
Yes, and many are designed that way. The Rough Country 72330 drops 2″ front and 4″ rear. The RTZ kits drop 5″ front and 7″ rear. The Belltech 795SP drops 1.5″ front and 3″ rear. The gap between the two numbers is what defines the stance, so choose a pair that matches the look you want.

The Bottom Line

For most Ram 1500 owners, the best truck lowering kits pick is the maXpeedingrods 2” Rear Lowering Springs because it drops the rear 2″ with a published 223.98lb/in spring rate (a measure of stiffness) and fits both the 2009-2018 Ram 1500 and the 2019-2024 Ram 1500 Classic. If you want a matched front-and-rear kit with mild drop numbers, choose the Belltech 795SP at 1.5″ front and 3″ rear. And for a deep 5″ front, 7″ rear stance on an 88-98 Silverado, reach for the RTZ 88-98 kit — just budget for the frame notch.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top