9 Best Storage for Nails and Screws | Screws Stay Put, Finally

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You know the drill. You tip a bin of mixed screws onto the bench and half of them roll under the saw. The real question is which organizer keeps each screw in its own cell after a bump. It is which one keeps a #8 wood screw in its own cell when the case gets bumped, tipped, and thrown in a truck bed. That answer lives in the lid design and the divider quality, not the marketing copy.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Some organizers lock every screw into place with a shaped lid, while others give you a drawer wall you can mount and grow. Below you’ll find the strongest storage for nails and screws options, sorted by how they actually hold up on a bench.

Top Picks

CRAFTSMAN VERSASTACK Storage Organizer, 20 Compartments (CMST17828)
Best OverallCRAFTSMAN VERSASTACK Storage Organizer4.5+★750+ ratingsThe case whose lid design stops a loaded box of screws from turning into one mixed pile. Twenty compartments, a heavy-duty transparent polycarbonate lid (a tough see-through plastic that resists cracking), and an IP54 rating.Check price on Amazon
DuraTech 3-Piece Small Parts Tool Box Organizer with 14 Dividers
Best Value SetDuraTech 3-Piece Small Parts Tool Box Organizer4.5+★500+ ratingsThree boxes that button together into one stack, with 14 dividers to carve out the cells you actually need. You get three separate boxes in two sizes, and 14 detachable partitions between them.Check price on Amazon
VEVOR Plastic Storage Bins 24 Pack, Hanging Stackable Organizer Bins
Best for Shop WallsVEVOR Plastic Storage Bins 24 Pack4.5+★500+ ratingsTwenty-four open-front bins that snap into a grid, so every nail size is visible and grab-able at a glance. This is the open-bin approach rather than the latched case.Check price on Amazon

How To Choose The Best Storage for Nails and Screws

Most people buy an organizer for the compartment count and regret it two weeks later. What actually decides whether you stay organized is how well the lid seals each cell shut. A 20-compartment case with a loose lid turns into one big soup of fasteners the first time it rides in a truck.

Match the container to how the fasteners leave the shop

A benchtop drawer cabinet keeps a wall of nails sorted and visible. A latched carry case is the right call if the screws travel to a job site. If you work off your belt, look for individual compartments with their own clips. A drawer cabinet bought for truck duty, or a carry case bought for a fixed bench, ends up unused.

Read the weight rating before you stack

Manufacturers publish a maximum weight recommendation for a reason. A case rated for a few pounds will bow and pop its latches once you fill every cell with steel. If you plan to stack modules on a shelf or in a van, check that figure first and buy to the stacked load, not the empty case.

Look at the lid material, not the color

A polycarbonate lid resists cracking and lets you spot a screw head through the plastic. Thin clear styrene lids haze over and split at the corners after a season in a cold garage. The lid is also the part that keeps parts from migrating between cells when the box tips.

Side-by-Side Comparison

Model Best For Compartments Weight Rating Lid / Access Type Amazon
CRAFTSMAN VERSASTACK CMST17828★ Best Overall Benchtop hardware sorting 20 10 pounds Clear polycarbonate lid Amazon
DuraTech 3-Piece OrganizerBest Value Set Mixed-size fastener sets 14 2.8 pounds Clear stackable lids Amazon
VEVOR Plastic Storage Bins 24 PackBest for Shop Walls Open-front hanging bins 24 bins — Open front, hangable Amazon
Stalwart 30-Drawer Organizer Wall or desktop drawer wall 30 — Clear pull drawers Amazon
DEWALT DWST14830 Pro Organizer Rough handling on site 20 10 pounds Clear polycarbonate lid Amazon
AMM Double Side Tool Box Large fastener collections 34 — Clear double-sided lid Amazon
Ultrawall Wall Mounted Bins Wall-mounted shop wall 12 bins 22 pounds per bin Open hanging bins Amazon
Akro-Mils 24-Drawer Cabinet Whole-workshop drawer bank 24 — Clear pull drawers Amazon
Ennovatools WVE9420 Tackle Box Belt-carry compartments 15 5 pounds Clear lid, reversible case Amazon

Detailed Reviews

★ Best Overall

1. CRAFTSMAN VERSASTACK Storage Organizer

Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.

20 CompartmentsIP54 Rating

The case whose lid design stops a loaded box of screws from turning into one mixed pile.

Twenty compartments, a heavy-duty transparent polycarbonate lid (a tough see-through plastic that resists cracking), and an IP54 rating. That IP54 figure means the case is protected against dust ingress and splashes of water — so a garage shelf, a damp van floor, or a splash from a hose will not send grit into your threads. The lid has a unique shape that presses each small part back toward its own cell when the case is closed, so a bumped box doesn’t scramble your sorted nails.

The max weight recommendation is 10 pounds. That’s your working budget, and it’s generous enough for a fully loaded case of mid-size screws. Two side latches let you clip it to other VERSASTACK modules, and the whole stack shares the same footprint as the family grows.

What wins people over is the build quality — that’s the thing the review pages keep coming back to, followed by how much it holds. The mixed feedback centers on sturdiness and size, so know the trade: 17.16 by 9.75 by 2.73 inches is a shallow case, which is exactly what makes it slide under a bench but means long nails and rod stock won’t lay flat. If you need deep cells for framing nails, this is not the box for that job.

What earns the top slot

  • Lid shape actively keeps small parts from drifting into neighboring cells
  • IP54 dust and water resistance suits a garage or job-site shelf
  • Side latches connect to other VERSASTACK modules for a growing stack
  • Removable dividers let you size cells to long bolts or tiny nuts

Where it gives ground

  • Shallow 2.73-inch depth limits long nails and rod stock
  • 10-pound ceiling means you can’t overload every cell with steel
  • Dividers need a firm seat or small parts sneak past them

The right home bench choice: Anyone sorting a mixed drawer of screws, nuts, and washers who wants to find the right size without dumping the whole box.

Look past it if: Your fasteners run long — the shallow depth won’t lay framing nails flat.

Best Value Set

2. DuraTech 3-Piece Small Parts Tool Box Organizer

3 Stackable Boxes14 Detachable Partitions

Three boxes that button together into one stack, with 14 dividers to carve out the cells you actually need.

You get three separate boxes in two sizes, and 14 detachable partitions between them. Push-button stacking holds the boxes firmly together, and two small boxes can flank the large one to save shelf space. That matters if you want one box for wood screws, one for machine screws, and one for the odds and ends you never sort — all carried as a single unit.

The material pairing is polypropylene and polycarbonate (a flexible tough plastic and a harder clear one), and the manufacturer calls them odorless. Clear lids mean you spot the right bolt without opening anything. Compare the weight rating to the CRAFTSMAN above, though — this set is recommended for 2.8 pounds, against 10 pounds for the CRAFTSMAN, so it is a lighter-duty system meant for small parts rather than a fully loaded box of steel. The compartment count is 14 versus 20 on the CRAFTSMAN as well.

Owners keep praising the quality and the organization, and the locking mechanism gets called out as secure. The honest catch is fit — the dividers don’t always seat cleanly, so a too-small part can slip under one. Treat the dividers as a rough guide and press each one home firmly when you set the box up.

Size-up reality: Three boxes cost less than most single organizers here, and you get two sizes to split tiny nuts from longer bolts.

Load-limit caveat: At a 2.8-pound recommendation this is not the set to fill to the brim with lag screws — small hardware is its lane.

Buy this if: You want separate boxes for separate fastener types and like the idea of stacking them as one carry unit.

Pass if: You’re loading heavy steel — the light weight rating won’t hold up to a full set of lag bolts.

Best for Shop Walls

3. VEVOR Plastic Storage Bins 24 Pack

24 BinsHang or Stack

Twenty-four open-front bins that snap into a grid, so every nail size is visible and grab-able at a glance.

This is the open-bin approach rather than the latched case. Each bin measures 5 by 4 by 3 inches, and the set comes with 24 bins, 48 pieces of label paper, and 96 plastic supports. You get 4 pounds of total product weight, against 4.5 pounds for the Stalwart drawer cabinet further down — similar bulk, but a completely different way of working: you reach into a bin instead of pulling a drawer.

Because the bins are open-front, they suit a wall or shelf where the fasteners stay put by gravity. They stack into a block or hang on a rail, and you can mix colors to split metric from imperial. The pillar-style design is what lets them hang. Labels are included, which is the difference between a functional wall and a wall of identical blue boxes.

The mixed feedback is size — some bins feel small for a full hardware collection. At roughly 4.21 by 3.39 by 2.68 inches of interior room, a bin holds a decent handful of common screws but not a bulk box of them. The build quality is what owners highlight most, so expect sturdy plastic rather than a disposable tray.

Where it shines: A visible, labeled wall of open bins is the fastest way to find a size when you’re mid-build and don’t want to open a case.

The catch: Open fronts mean dust and shop grit settle in, and a tipped bin empties itself.

Suits the wall organizer: Shops and garages where fasteners live on a shelf or rail and get grabbed by hand all day.

Not the travel pick: Nothing latches these closed, so they’re a poor fit for a truck bed or a bouncing job-site cart.

Most Drawers

4. Stalwart 30-Drawer Plastic Small Parts Organizer, Yellow

30 DrawersWall-Mountable

Thirty pull-out drawers in one frame — the fast way to give every screw size its own slot.

Six large drawers and 24 small ones add up to 30 separate cells. The small drawers measure 2.1 by 5.25 by 1.5 inches and the large ones 4.5 by 5.2 by 2.1 inches, which is enough to hold a pile of #8 screws or a run of small bolts. Finger pulls on each drawer mean you can open one one-handed while your other hand holds the driver.

It sits on a bench or mounts to a wall through keyholes on the back of the frame, and the frame is polypropylene (a tough, flexible plastic that resists cracking). The clear drawers let you see contents without pulling one out. Clear drawers let you spot the right gauge without pulling one open.

Owners single out the size selection as the reason it works, and the drawer count is what makes it versatile across hardware, craft bits, and small parts. It weighs 4.5 pounds, which is light enough to hang on a shed wall without heavy framing. The honest limit is capacity per drawer: the small drawers are shallow, so a bulk bag of nails will not fit in one cell.

Strong points on the bench

  • 30 drawers in one frame give every screw size its own home
  • Keyhole slots allow wall mounting in a shed or closet
  • Clear drawers and finger pulls make one-handed access easy
  • Light enough at 4.5 pounds to hang without heavy backing

Trade-offs to weigh

  • Small drawers are 1.5 inches deep, so bulk bags won’t fit one cell
  • Drawers slide free — no positive latch to hold them in during a move

The drawer-wall answer: A garage or shed that wants a fixed, wall-hung wall of sorted hardware rather than a portable case.

Think twice if: You need to move the whole collection regularly — drawers and contents are not locked down.

Job-Site Tough

5. DEWALT 20 Compartment Pro Organizer (DWST14830)

20 CompartmentsStacks With Pro Units

Built to survive being thrown in a truck, with a lid shape that keeps screws in their own cells.

Twenty compartments and a heavy-duty transparent polycarbonate lid, with the same anti-migration lid design as the CRAFTSMAN. Where this one pulls ahead is size and load: it measures 17.4 by 11 by 2.9 inches and is rated for 10 pounds, while the VEVOR bins cover just 5 by 4 by 3 inches per bin. That extra footprint means fewer, deeper cells — better for longer hardware that won’t fit a shallow bin.

Side latches clip this unit to other PRO organizers, including the DWST14825 Deep PRO, DWST14925 Shallow PRO, and DWST14835 10-compartment PRO. So as your fastener collection grows, you build a stack rather than buying a new system. Removable dividers let you reshape each cell to the screw run in it.

Owners describe it as well-made and durable enough to survive a full season of abuse — the durability gets the second-biggest share of praise after build quality. There’s mixed feedback on the lid and on size, so pick your moment: the lid takes a firm press to seat, and the case is wide enough to need real shelf space. Neither is a deal-breaker on a job site, where the extra real estate is the point.

Why the pros carry it: A 10-pound rating and polycarbonate lid put this in the same class as the top pick for handling, with a wider footprint for longer hardware.

The fit note: The lid needs a firm press to lock down — a snug seat, not a loose snap.

Reach for it on the road: Mobile trades who want a case that stacks with other PRO units and survives a truck bed.

Skip it for tight shelves: At 17.4 by 11 inches it eats bench space a smaller case would leave free.

Highest Capacity

6. AMM Double Side Tool Box Organizer

34 CompartmentsDouble-Sided

The biggest cell count here — 34 compartments opened from both sides, so twice the screws fit one case.

Open a double-sided case and you get two working faces. That’s how 34 compartments fit into a box that measures 12.8 by 10.83 by 6.69 inches, and 24 of those dividers slide out so you can merge cells for longer bolts. The clear lid means you read the contents without opening either side.

The plastic is heavy duty, and four locking latches are meant to hold both sides shut and keep hardware from spilling if the box takes a fall. A top handle lets you carry the whole loaded case with one hand.

Here’s the catch. The closure gets mixed feedback, with reports that it doesn’t stay closed tightly. A double-sided case carries a lot of weight, so treat the latches with care and don’t over-pack it — an overloaded case strains any latch. The water resistance level is listed as waterproof, which is more than most plastic boxes here promise.

What it brings to the truck

  • 34 compartments open from both sides for twice the sorting space
  • 24 removable dividers let you merge cells for long bolts
  • Four locking latches and a top handle for one-hand carry
  • Listed as waterproof for wet job-site conditions

What to watch

  • Latches reportedly don’t stay tight — don’t overload it
  • A double-sided case gets heavy fast when both faces are full

The volume play: Anyone with a sprawling collection of screws, nuts, and bolts who wants one case to hold the bulk of it.

Be careful if: You tend to pack a case full to the brim — the closure isn’t the strong suit here.

Best Wall Rail

7. Ultrawall Wall Mounted Storage Bins

12 Hanging Bins22 lbs Per Bin

Three steel rails and 12 bins rated to 22 pounds each — a shop wall that carries real weight.

This is the heavy-duty wall option. You get three steel rails and 12 sturdy plastic bins, four bins per rail, and each bin carries a maximum weight recommendation of 22 pounds. That is more than double the 10-pound rating on the CRAFTSMAN and DEWALT cases, so you can fill a bin with a full bag of nails and not worry about the bottom sagging.

The bins snap firmly onto the rails and lift off when you need them at the bench. Installation is straightforward with the included rails, and the metal-and-plastic build is the reason it holds a load. Hardware, fasteners, and small parts live in the open bins where you see them all at once.

The feedback here is almost entirely positive — build quality leads, and owners describe the bins as large enough to hold a lot and snapping in firmly. Durability and installation get mentioned warmly too. The only real limit is that open bins collect dust and are not a travel solution; if the fasteners need to leave the shop, this is a wall fixture, not a carry case.

Load carrying: A 22-pound-per-bin rating turns a wall into a hardware shelf you can trust with bulk quantities.

Fixed setup: Bins hang on rails — this is a stationary wall system, so it stays where you mount it.

For the working shop wall: Garages that want bulk fasteners visible, labeled, and load-bearing on a dedicated rail.

Not for the road: Nothing here is portable — the bins are a fixed-wall solution.

The Long Haul

8. Akro-Mils 24-Drawer Plastic Storage Cabinet

24 DrawersMade in the USA

The drawer cabinet that workshops have leaned on for years — rugged plastic, made in the U.S.A., 24 drawers.

A 24-drawer cabinet built from rugged, high-impact plastic in the U.S.A., measuring 20 by 6 by 16 inches. Each drawer’s external dimensions are 6 by 4-1/2 by 2-3/16 inches, which is bigger than the small drawers on the Stalwart 30-drawer unit — so a single drawer swallows a decent handful of screws rather than just a pinch.

Dividers are molded into the back of the cabinet, so nothing gets lost. Finger-grip pulls and rear stop tabs mean you can pull a drawer fully open without spilling its contents on the floor. Stop tabs keep a fully pulled drawer from sliding out and spilling its screws.

Owners rate it high for storage capacity and organization, and the small drawers keep everything separated. It has by far the largest body of feedback in this roundup, so the pattern across owners is reliable. The trade-off is that it is a countertop or wall cabinet, not a carry case — you do not tote this to a job site.

Built for the long run

  • 24 high-impact plastic drawers, made in the U.S.A.
  • Rear stop tabs prevent contents spilling when drawers open
  • Dividers molded into the back of the cabinet — never lost
  • Stacks securely or mounts to a wall via keyhole slots

Where it stops short

  • Countertop or wall cabinet only — not portable
  • Fixed drawer count; no way to merge cells for long hardware

The bench fixture: A workshop that wants a permanent, stackable drawer bank for sorted screws and small parts.

Look elsewhere if: You need the fasteners to travel — this cabinet stays put.

Best for the Belt

9. Ennovatools Hardware Tackle Box

15 Clip-On CompartmentsReversible Case

Compartments that clip to your belt and pop out of the case — grab a screw run without opening a thing.

Fifteen compartments, each with a patented EZ-Clip that attaches to a work belt. That is the whole idea: the individual boxes detach and ride on your hip while the carrying case stays on the truck. The carrying case itself is reversible, so you can reach a compartment from outside without opening it, and a clear top cover lets you read the contents fast.

It carries a 5-pound maximum weight recommendation, which suits a belt load of common screws and fixings — but note that is half the rating on the CRAFTSMAN and DEWALT cases, so a full belt of lag hardware is beyond its purpose. The case measures 13.75 by 12.25 by 6 inches and includes a strap and integrated handle.

Quality is the thing that gets praised most here, and the second-biggest theme is organization — the separate boxes you can carry individually. The one honest caveat is lid operation, which draws mixed feedback: the clear cover hinges work but do not feel as refined as the rest of the build. A one-year manufacturer warranty backs the case.

Belt-side flexibility: A grab-and-go divider system for anyone working at height or moving between tasks.

Not a bench box: Fifteen small compartments hold field quantities, not bulk — this is a companion case, not your main storage.

Made for the mobile job: Trades who want fasteners on their belt and a case to stage refills from.

Wrong tool for bulk storage: The small compartments and 5-pound rating won’t hold a full hardware drawer’s worth.

Know the Specs

Compartment count and cell shape

Compartment count matters less than cell size and depth. A 34-compartment case and a 15-compartment case hold very different amounts if the cells differ in size and depth. Match the cell shape to your fasteners — long bolts need removable dividers that merge into a long channel, while tiny nuts do best in small, deep cells.

Lid sealing and anti-migration design

The lid is what stops a sorted case turning into a mixed pile. Look for a lid that presses each part down into its own cell when closed, and for a clear material that lets you see in without opening. Polycarbonate lids tend to resist cracking better than thin clear plastics.

Weight rating and stackability

A maximum weight recommendation tells you how much the case or bin is built to hold when full. A higher rating means you can load every cell with steel without the frame bowing or latches popping. If you plan to stack modules, buy to the combined stacked load, not the empty case.

Wall mount versus carry

Fixed drawer cabinets and rail-and-bin systems give you the fastest access at the bench but stay where they’re mounted. Latched carry cases and belt-clip compartments move with you. Many workshops run a fixed drawer bank for bulk stock plus a latched case for job-site refills.

Common Questions

Will a plastic organizer hold a full box of screws without bowing?
Check the maximum weight recommendation on the case, then pre-fill to that figure rather than filling every cell to the brim. A case rated for 10 pounds, like the CRAFTSMAN and DEWALT organizers, handles a fully loaded sorted set of mid-size screws. Lighter systems rated around a few pounds are meant for small parts, not a bulk box of steel.
How do I stop screws moving between compartments?
The lid design does most of the work. Some organizers have a lid that presses each part back toward its own cell when closed, so a bumped box doesn’t scramble the contents. Press the case shut fully each time, and check that every removable divider is seated flush — a loose divider lets a small part slip underneath.
Are clear plastic lids strong enough for a garage?
Polycarbonate lids are the tougher choice, since that material resists cracking better than thin clear plastics. If the case lives in a cold garage or a damp van, look for an IP rating as well — the CRAFTSMAN case is rated IP54 for dust and water resistance. That protects the threads from grit and splash rather than deep water immersion.
Can I mount a drawer organizer on a wall?
Some can. The Stalwart 30-drawer organizer and the Akro-Mils 24-drawer cabinet both have keyhole slots for wall mounting, and the Ultrawall bins are designed around steel rails. Check that the mounting surface can carry the loaded weight before you hang a full cabinet — a wall cabinet full of steel is a lot heavier than the empty unit.
Is a drawer cabinet or a carry case better for nails and screws?
It depends on where the fasteners leave the shop. A drawer cabinet keeps everything visible and fixed at the bench, which is the fastest way to grab a size mid-build. A latched carry case or a belt-clip compartment system moves with you to the job. Many buyers keep one of each rather than trying to make one do both.
Do removable dividers actually stay put?
They stay put when they’re pushed fully home and the case isn’t overloaded. DuraTech owners note that the dividers don’t always fit cleanly, so a small part can slip under one. The fix is simple: seat each divider firmly when you set up the box, and don’t pour parts in faster than the dividers can hold them.
What size organizer do I need for a mixed drawer of fasteners?
Start with the number of distinct screw sizes you actually keep, not the total count of pieces. A 20-compartment case sorts common sizes with room to spare, while larger collections do better in a 30- or 34-compartment system. Remember that length matters too — long bolts need a case with removable dividers that open into a long channel.
Will an open-bin wall system keep dust off my screws?
No — open-front bins trade sealing for visibility and speed of access. They are ideal for a shop wall where you can see every size at a glance, but shop grit and sawdust will settle in. If the fasteners live in a dusty workshop, a latched and sealed case keeps the threads cleaner; a wall of bins keeps them faster to reach.
Can I stack different organizers together?
Only when the brands are built to connect. The CRAFTSMAN case links to other VERSASTACK modules via side latches, and the DEWALT case clips to its PRO organizer family. The DuraTech boxes stack with each other through push-buttons. Mixing brands usually means separate stacks, so pick a system if you plan to grow.
How much weight can a belt-clip compartment system carry?
Look for the published maximum weight recommendation. The Ennovatools case is rated for 5 pounds, which suits a belt load of common screws and fixings. Anything heavier than that, such as a full run of lag bolts, is beyond the intended load — a heavier-rated carry case is the better pick for that job.

The Bottom Line

For most benches, the win goes to the CRAFTSMAN VERSASTACK CMST17828 — 20 compartments, a polycarbonate lid that keeps screws in their own cells, IP54 dust and water resistance, and a 10-pound rating that matches the DEWALT for less shelf space. If you want a stackable multi-box set for separate fastener types, the DuraTech 3-Piece is the value buy. And for a wall that carries bulk hardware on rails, the Ultrawall 12-bin system with its 22-pound-per-bin rating is the one to mount. Match the container to whether your fasteners stay at the bench or ride to the job site.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top