A MagSafe portable charger snaps onto the back of a compatible iPhone and starts charging on its own, with both battery levels shown in the Batteries widget.
Magnets do the aiming, so there’s no cable to fumble for and no port to fight with in a parking lot. Two quirks catch people, though: The steps below cover attachment, the 90% cap, and how to charge the pack and phone together.
Attaching The Charger And Confirming It’s Charging
The charger attaches when you hold it against the back of a MagSafe-compatible iPhone or MagSafe case — the magnets align it and the phone begins charging automatically.
Apple’s use instructions ask for iOS 14.7 or later and a MagSafe-compatible iPhone. Remove any iPhone wallet first; a card sleeve sitting between phone and pack blocks the alignment and the charge never starts reliably. Thick or non-MagSafe cases can cause the same problem, while Apple lists MagSafe cases and sleeves as supported.
Once it’s on, look for the charging symbol on the iPhone’s screen. For exact levels, add the Batteries widget to your home screen — it shows the iPhone and the pack side by side, so you know how much juice is left on each. To stop charging, gently pull the pack away from the phone.
Charging Past 90% And Charging Both At Once
Apple limits the MagSafe Battery Pack to 90% by default to help extend the pack’s lifespan, and you can override that in Control Center by pressing or tapping the Low Power Mode control and choosing Charge Past 90%.
You don’t need to charge them one at a time. Connect the pack to a power adapter while it’s still attached to the iPhone and both top up.
For the best charging speed, use a 20W-or-higher power adapter. A weaker adapter still works, just more slowly.
Which iPhone Works With Which Battery Pack
The Lightning-port MagSafe Battery Pack fits iPhone 12 through iPhone 14 models, while the newer iPhone Air MagSafe Battery is designed exclusively for iPhone Air.
| Battery Model | Added Charge (Apple’s Max) | Made For |
|---|---|---|
| MagSafe Battery Pack (Lightning) | Up to 70% (12/13 mini), 60% (12/12 Pro, 13/13 Pro, 14/14 Pro), 40% (12/13 Pro Max, 14 Plus, 14 Pro Max) | iPhone 12, 13, 14 lines |
| iPhone Air MagSafe Battery | Up to 65% | iPhone Air only |
| Wireless speed on the go | Up to 15W (MagSafe Pack), up to 12W (iPhone Air pack) | Model-dependent |
| Charging input | Lightning-to-USB cable (MagSafe Pack), USB-C (iPhone Air pack) | 20W+ adapter recommended |
| Software floor | iOS 14.7 or later | MagSafe-compatible iPhones |
| US price, iPhone Air pack | $99.00 | US market |
| Works through | MagSafe case or sleeve | Wallet must come off |
Those added-charge figures are Apple’s maximums, not promises — model, settings, background apps, and temperature all shift the real number. Apple’s MagSafe Battery Pack technical specifications list the exact percentages per iPhone model.
One honest gap: Apple’s documentation doesn’t publish a watt-hour capacity, weight, or dimensions for the older Lightning pack, so treat third-party figures you see elsewhere with suspicion. If you’re shopping for a pack, our roundup of the best wireless portable charger for iPhone compares models side by side.
Charging Times And Real-World Expectations
The pack charges fastest on a 20W-or-higher adapter and slows noticeably on a low-wattage one, so the wall brick you already own decides how long a top-up takes.
Those are peak figures. A thick case, a warm car dashboard, or heavy GPS use drops them. Remove the wallet, keep the pack and phone out of direct sun, and let the magnets do the aligning rather than pressing the pack down hard.
Watch the widget rather than guessing — if the battery-pack level isn’t dropping while your phone climbs, charging is working. If neither moves, pull the pack off, check for a wallet or bulky case, and reattach.
Common Questions
Does The Pack Drain When Left Attached Overnight?
Leaving the pack attached overnight is fine, but it’s not charging anything once the iPhone is full. The pack still loses a little over time like any battery. If you want the iPhone to hold at maximum, unclip the pack and charge both separately.
Why Does My Phone Stop Charging At 90%?
That’s Apple’s default cap to help extend the pack’s lifespan. In Control Center, press or tap the Low Power Mode control and pick Charge Past 90%. The cap returns to 90% on the next charge unless you override it again.
Can I Use A Regular Case With A Magnetic Pack?
Sometimes, but reliably only with an Apple-supported MagSafe case or sleeve. Thick, non-MagSafe, or badly fitted cases weaken the magnetic alignment and the charge can stall or run slow. Remove iPhone wallets entirely — a card sleeve between the two blocks proper contact.
Sources
- Apple Support. “MagSafe Battery Pack – Technical Specifications” Lists per-model added charge and 15W wireless charging figures.
- Apple Support. “How to use your MagSafe Battery Pack” Covers attachment, the 90% cap, and charging both devices.
- Apple Support. “MagSafe chargers and battery packs” iPhone User Guide on compatibility and MagSafe accessories.