NOAA Weather Radio All Hazards is a free, 24/7 network of government radio transmitters that broadcasts official National Weather Service forecasts, watches, and warnings across the US.
A tornado warning fires at 2 a.m., the cell network is congested, and your phone never buzzes. That gap is exactly what this network fills: a dedicated radio picks up the broadcast whether or not the internet or cell towers stay up. Understanding what NOAA Weather Radio is and how it works comes down to three things — over-the-air VHF signals, a receiver you buy once, and location codes that decide which alerts reach you.
What Does NOAA Weather Radio Actually Broadcast?
NOAA Weather Radio All Hazards carries continuous National Weather Service forecasts, watches, and warnings, plus selected natural, environmental, and public-safety emergency information, 24 hours a day. The network is part of the Federal Communications Commission’s Emergency Alert System framework.
Coverage spans all 50 states, adjacent coastal waters, Puerto Rico, the US Virgin Islands, and US Pacific Territories. The National Weather Service currently describes the network as having more than 1,000 transmitters. Broadcasts originate from or are directly linked to local NWS offices, so the voice you hear is the local forecast office talking to its own area.
Two points trip people up. First, NOAA Weather Radio is not an app, a subscription, or an internet stream — it is a radio broadcast, received over the air. Second, picking up a broadcast does not require an EAS-compatible television or a mobile phone.
How Does A Weather Radio Receive Alerts?
A weather radio receives alerts by tuning to one of seven VHF public-service frequencies, and SAME-capable models add automatic, county-level filtering. The simplest setup is a radio tuned to the strongest local frequency and left running continuously.
These are the seven channels the network uses, in MHz:
- 162.400
- 162.425
- 162.450
- 162.475
- 162.500
- 162.525
- 162.550
Typical reception reaches roughly 40 miles from a transmitter. Terrain, distance, antenna quality, building construction, and the receiver itself all move that number, so the 40 miles is a normal case, not a promise.
The smarter layer is SAME — Specific Area Message Encoding. When the NWS issues a warning, watch, or other authorized message, the transmission carries coded data naming the event type, the affected geographic area, and an expiration time. A SAME receiver compares that code against the locations you programmed and sounds only when your area is hit.
The geographic code is a six-digit SAME code, generally the county’s Federal Information Processing Standards (FIPS) code with a leading zero. Some jurisdictions use parish, independent-city, or marine-area designations instead.
Which Receiver Should You Get, And What Does It Cost?
You need a dedicated weather radio or scanner that covers the 162.400–162.550 MHz frequencies, and the NWS says these receivers generally run from around $20 to more than $100 depending on features. An ordinary AM/FM radio will not pick up the network at all.
The NWS receiver directory lists models from Midland, Kaito, Sangean, Reecom, Cobra, Motorola, Oregon Scientific, First Alert, Jensen, and others. Listed examples include the Midland WR120, WR300, WR400, ER10, ER200, ER300, and 1001LWX; the Kaito KA500, KA600, and KA900; and the Sangean CL-100.
That directory is a compatibility reference, not a price list. Check current pricing and model revisions with the manufacturer or seller before buying, and confirm the model supports SAME if you want automatic area-specific alerts. If you would rather compare real-world options side by side, this roundup of top rated weather alert radios covers tested picks and what each one does well.
| Receiver Type | What It Does | Best For |
|---|---|---|
| Basic weather radio | Manual tuning to a local NWR frequency, continuous playback | Anyone wanting simple, always-on forecast audio |
| SAME-capable radio | Alerts only for programmed county or marine codes | Households that want warnings, not constant chatter |
| Scanner with NWR band | Receives weather channels alongside other public-service traffic | Listeners already using a scanner |
| Handheld / portable model | Battery or hand-crank power for outages and travel | Camping, boating, and power-loss backup |
| Public-alert receiver | SAME filtering plus louder alarms and external outputs | Schools, offices, and noisy environments |
How Do You Set One Up Correctly?
Setup is five steps: pick a SAME-capable receiver, find your county’s transmitter frequency, tune it in, enter your six-digit code, and test the alarm.
- Buy a receiver or scanner that supports the NWR frequencies, choosing a SAME model if you want automatic alerts. This page from the National Weather Service’s NOAA Weather Radio program is the starting point for the network’s coverage and documentation.
- Use the NWS transmitter list for your county to find the right frequency. Nearby transmitters can use different channels, so guessing costs you reception.
- Tune to that frequency and confirm the audio is clear. If it is not, try another transmitter or move the radio near a window.
- Look up your six-digit SAME code for the county, parish, independent city, or marine area, then enter it using the manufacturer’s instructions. Add every county you care about if you live near a boundary, travel, or boat.
- Select the alert types you want if the receiver allows filtering, then run the test function. Keep the radio powered, and add battery backup for outages.
Expect the alarm to confirm itself when it works — most units flash a light, sound a short test tone, or display the county name on screen.
One caveat worth repeating: an alert is a heads-up, not a set of instructions. Follow whatever local emergency officials tell you to do.
Common Questions
Do I Need A Special Radio To Hear These Broadcasts?
Yes. A standard AM/FM radio cannot tune the 162 MHz weather band, so you need a receiver or scanner built for those frequencies. Look for a model that lists NOAA weather channels in its specs. Any unit covering the seven VHF channels will receive broadcasts, but only a SAME-capable model will filter alerts to your county.
Why Does My Radio Stay Silent During Storms?
Three usual causes: the county code was never programmed, the radio is tuned to a transmitter too far away, or the model lacks SAME and you have the alert mode off. Check the code against your county’s official listing, switch transmitters, and confirm the alert switch is on. Reception also drops indoors, so move the unit near a window.
Does This Work Without Power Or Cell Service?
The broadcast is sent over the air from government transmitters, so it does not need the internet or a cell tower to reach you. Your radio, though, needs power. Battery-backup, hand-crank, and solar models keep working when the grid goes down, which is exactly when warnings matter most.
Sources
- National Weather Service. “NOAA Weather Radio All Hazards” Official program page covering network coverage, frequencies, and SAME alerting.
- National Weather Service. “NOAA Weather Radio Receivers” Compatibility directory of receiver manufacturers and listed models.