That single missing number is why the fit check below comes before the mounting instructions.
What Peloton Actually Sells For the Handlebars
There is no dedicated iPad holder in Peloton’s catalog.
The tray attaches at the handlebars and, per Peloton’s description, keeps your device nearby without disrupting the ride. Peloton ships it with the mounting hardware and printed instructions — those instructions, not a blog post, are the authority on getting it seated correctly.
- Dimensions: 4.5 × 6.9 inches
- Listed compatibility: Cross Training Series Bike and Bike+, Original Series Bike+
Note what’s missing from that list: the original, first-generation Peloton Bike. Check your model’s badge before ordering. If yours is the first-gen Bike, contact Peloton Support to confirm fit rather than assuming the tray will bolt on.
Does Your iPad Fit the Tray?
Probably not, if it’s a 12.9-inch Pro. Peloton publishes the tray’s outer footprint but not the usable interior opening, so a 4.5 × 6.9-inch spec is a starting filter, not a guarantee. Measure the actual recessed area once the tray is in hand and compare it to your iPad’s width and depth with the case on.
Thick folio or rugged cases cut clearance fast. A slim case or a bare tablet has the best odds. Peloton lists no supported iPad generations, no iPadOS version, and no tablet weight limit — so the honest answer is that a standard iPad in a thin case may sit fine, while a heavy Pro model is a judgment call only you can test.
| Fit Factor | What Peloton Specifies | What to Do |
|---|---|---|
| Bike model | Cross Training Bike/Bike+, Original Series Bike+ | Confirm your badge; call Support if it’s first-gen |
| Tray footprint | 4.5 × 6.9 inches | Measure the recessed opening, not the outer edge |
| Tablet size | “Small tablet” | Test with your iPad and case before riding hard |
| Weight limit | Not published | Keep the iPad light or ask Support directly |
| Touchscreen access | Must stay clear | Reposition if the tablet shadows the screen |
| Mounting hardware | Included with tray | Follow the printed sheet, don’t improvise |
How Do You Mount It Safely?
Follow the printed instructions that ship in the box — Peloton’s support pages cover manuals and accessory products generally but don’t publish a step-by-step Phone Tray article. The sequence below is the conservative order that keeps you out of trouble.
- Verify your Bike model against Peloton’s compatibility list before unboxing the hardware.
- Set the tray at the handlebar location called out in the included instructions.
- Install and tighten the supplied hardware exactly as directed — no aftermarket brackets, no adhesive.
- Push down lightly on the empty tray. Any wobble means tighten further before loading it.
- Seat the iPad centrally, then pedal normally and watch for shifting.
- Confirm nothing blocks the touchscreen, resistance knob, handlebar controls, or your line of sight.
- Pull the iPad out before moving, servicing, or transporting the Bike.
If you’re still comparing mounting options before committing, this tested roundup of Peloton iPad holders covers alternatives worth weighing against the official part.
One more limit worth stating plainly: the tray is a piece of plastic and metal. It doesn’t run iPadOS, doesn’t link the iPad to the Peloton software, and doesn’t turn your tablet into a second touchscreen. You’re getting a shelf, not an integration. Peloton’s Phone Tray product page spells out the dimensions and compatible models.
What Goes Wrong Most Often
The common failures are all preventable and all cheap to avoid.
Buying on the strength of the Peloton badge alone tops the list — the tray’s compatibility list excludes the original Bike. Next is trusting 4.5 × 6.9 inches as proof a 12.9-inch iPad will drop right in, when the usable opening is unlisted. Oversized cases cause the same problem from a different angle. So do loose hardware and a tablet parked where it hides the touchscreen or blocks your reach to the resistance knob.
Pull it first, every time.
When fit is genuinely uncertain — a heavy tablet, a thick case, a first-gen Bike — Peloton Support answers model-fit and hardware questions that the product page leaves blank. A two-minute message beats a $45 part that doesn’t clamp on.
Common Questions
Will a 12.9-inch iPad Pro fit the Peloton Phone Tray?
Unlikely to fit securely. Peloton describes the tray as holding a phone or small tablet and publishes a 4.5 × 6.9-inch footprint, with no weight rating. A large Pro model in a case exceeds what most riders would call a small tablet. Measure the tray’s recessed opening and test stability before trusting it during a hard ride.
Does the tray work with the original first-generation Peloton Bike?
Peloton’s product page lists the Cross Training Series Bike, Cross Training Series Bike+, and Original Series Bike+ as compatible. The first-generation Bike is absent from that list. Contact Peloton Support with your bike’s serial number and confirm fit before ordering, since the mounting point may differ.
Can I use my own third-party iPad mount instead?
Yes, riders commonly do, but check that the mount clamps to the handlebar diameter without obstructing controls. GoPro-style arm mounts and clamp-style tablet holders are the usual picks. Skip adhesive-only solutions — sweat and vibration defeat them. Whatever you choose, confirm the tablet clears the touchscreen and resistance knob.
Sources
- Peloton. “Peloton Phone Tray” Source for price, dimensions, delivery, returns, and listed bike compatibility.
- Peloton Support. “Accessory Products” Official accessory help topic for hardware questions.
- Peloton Support. “Peloton Manuals” Manual library covering Bike hardware setup.