A photo scanner shines light on the print, reads the reflected red, green, and blue light with a line sensor, and turns those readings into pixels saved as an image file.
A curled snapshot jammed through a sheet feeder comes out as a blur — and that failure explains the whole machine in one image. The print has to sit close and flat because the sensor inside a consumer photo scanner reads only a thin slice of the photograph at a time, then repeats the read hundreds of times as the scan head or the paper moves. Get that sequence right and a stack of prints becomes a folder of files in an afternoon.
What Happens Inside The Scanner, Step By Step?
The scanner lights the print, measures the light that bounces back, converts those measurements into electronic data, and lets software assemble the data into an image. Nothing about that chain is mysterious once you split it up.
A lamp — commonly red, green, and blue LEDs — washes the photograph in light. The brighter the reflected light at any point, the lighter that spot appears in the final file. Reflection alone carries the color information; the sensor’s job is measurement, not interpretation.
The sensor reads the print one line at a time. Consumer models rely on one of two designs:
- CCD (charge-coupled device): mirrors and lenses carry the reflected light to the sensor. This design tolerates a print that isn’t perfectly flat, which matters for older photographs with a slight bow.
- CIS (contact image sensor): the sensor sits close to the photograph, so the whole unit stays compact. The trade-off is depth of field — a print that lifts off the glass goes soft fast.
As the paper passes, the sensor logs line after line, and the scanning software stitches those lines into a single file.
Why Do Resolution And Color Depth Change The Result?
Resolution sets how much real detail gets captured, and color depth sets how many shades the file can hold. Both numbers appear on every scanner box, and both are easy to misread.
Optical resolution is the sensor’s true capture rate. Output or interpolated resolution is a higher number produced by software filling in the gaps — it sounds better and isn’t. The FF-680W lists 600 dpi optical and 50–1,200 dpi output, so the 1,200 figure describes processing, not captured detail.
Color depth works the same way. The FF-680W specifies 30-bit internal and 24-bit external color, 10-bit internal and 8-bit external grayscale, and 1-bit monochrome. The internal figures describe what the hardware handles before saving; the external figures describe the file you actually get. For photographs, 24-bit color is the standard and it holds up fine — the extra internal bits help the software smooth gradients rather than adding visible color you’d otherwise miss.
| Spec | FF-680W Rating | What It Means For You |
|---|---|---|
| Optical resolution | 600 dpi | True captured detail; enough for sharp 4-by-6 reprints |
| Output resolution | 50–1,200 dpi | Higher settings interpolate — no new detail appears |
| Color depth | 30-bit internal / 24-bit external | 24-bit files are standard for photo sharing and printing |
| Scan speed | 80 pages per minute | Measured on 4-by-6 landscape prints at 300 dpi only |
| Batch capacity | Up to 40 photos | Some listings state 35; capacity varies by configuration |
| Sensor type | One-line CIS | Compact and fast, but prints must lie flat |
| Connectivity | USB 3.0, 802.11 b/g/n | Wired is faster; wireless frees up desk space |
| US list price | $629.99 | Manufacturer price, not a guaranteed retail figure |
Speed claims deserve the same scrutiny. Epson’s 80-pages-per-minute figure applies to 4-by-6-inch landscape photographs at 300 dpi color — not to 8-by-10 prints, not to 1,200 dpi, and not across every connection type. Anyone scanning a shoebox of mixed sizes should expect slower real-world throughput. If you’re weighing models before you commit, this roundup of tested wireless photo scanners compares the current options side by side.
What Should You Do Before And After The Scan?
Clean the equipment, feed only flat prints, and keep an untouched master file alongside any corrected copy. Those three habits prevent most of the disappointment people blame on the hardware.
Start with the glass and the feed path. Dust and fingerprints on the glass show up as streaks in every file; a soft, non-abrasive cloth handles both. Wipe prints down too, and skip anything curled, brittle, torn, wet, or genuinely valuable in a feeder — those belong on a flatbed or with a professional service. Sheet feeders pull paper through rollers, and old prints crack.
The rest is software discipline:
- Install the manufacturer’s software and pick the scanner, photo size, color mode, resolution, and file format.
- Run a single test scan and check cropping, orientation, focus, and whether highlights blew out.
- Match resolution to purpose — 300 dpi for sharing, 600 dpi for reprints or archive.
- Enable automatic color restoration, red-eye removal, deskew, and crop only when they genuinely improve the image.
- Save the unmodified scan as your master, then create corrected copies from it.
- Name files descriptively and keep a second backup drive.
That master-file habit is the one people skip and later regret. Automatic enhancement is not reversible, and a restored scan of a faded print can look nothing like the original your family remembers. Epson lists color restoration, automatic enhancement, red-eye reduction, deskew, crop, and rotate on the FF-680W, all applied after the raw capture.
One more expectation to reset: OCR. Optical character recognition converts scanned documents containing recognizable printed text into editable Word or Excel files and searchable PDFs, per Epson. A photograph of a birthday party has nothing for OCR to read, so the feature does nothing there. It matters for the letters and certificates mixed in with the pictures.
Do You Need A Sheet-Fed Scanner Or A Flatbed?
The choice comes down to volume and condition. Feeder models like the FF-680W exist to move hundreds of prints quickly; a flatbed handles the delicate originals a feeder would destroy.
Owning both isn’t realistic for most households. A practical split: run the bulk of ordinary prints through a sheet feeder, and set aside curled, damaged, or oversized pieces for a flatbed, a photo lab, or a careful phone capture. Compatibility is worth confirming before purchase too — the cited US FF-680W page states Windows and macOS support, which does not promise every Windows or macOS release, nor any mobile or Linux system. US pricing and availability also shouldn’t be read as global; Epson’s UK listing carries a different regional price than the $629.99 US figure.
Common Questions
Does a higher dpi setting capture more detail?
Only up to the scanner’s optical limit. Settings above that ceiling interpolate, meaning the software invents pixels between the ones it actually measured. The Epson FF-680W captures 600 dpi optically even though its output setting reaches 1,200 dpi. Files grow larger and scans take longer while real detail stays the same.
Can I scan old or damaged photographs through a feeder?
Usually not safely. Feeders pull prints through rollers, which can crack brittle paper, worsen tears, or smear a wet original. Flat prints in decent condition feed fine. Curled, torn, or valuable photographs belong on a flatbed scanner or in the hands of a photo service that handles archival material.
Why do my flatbed scans come out blurry at the edges?
That’s a depth-of-field issue. Contact image sensors have very little tolerance for a print lifting off the surface, so a buckled photo or trapped dust leaves the edges soft. Pressing the print flat under a clean sheet of paper or glass often resolves it. Thick or textured originals may need a CCD-based scanner.
Sources
- Epson US. “FastFoto FF-680W Wireless High-speed Photo Scanning System” Source for sensor type, resolution, color depth, speed, capacity, and US price.
- Epson UK. “FastFoto FF-680W Product Page” Illustrates regional pricing differences for the same model.