A throatless metal shear is a hand-powered cutter with no throat to limit how far a sheet can extend past the blade, so you can cut straight lines, circles, and irregular curves without repositioning the panel.
Standard bench shears box the workpiece in: a fixed back wall stops the material from traveling further, which turns every long cut into a series of trims and re-alignments. A throatless model removes that wall entirely, letting the sheet pivot freely around the cutting point. The difference shows up the moment you cut a radius — one continuous curve instead of a staircase of straight nicks.
Every machine described here is manual and needs no electrical power. Instead you get cast-iron rigidity, a lever handle, and a blade arrangement that shears metal at one point rather than sawing through it.
How Does A Throatless Shear Actually Cut Metal?
The blades apply opposing shear forces at a single point, separating the metal cleanly instead of grinding out a kerf. Baileigh’s product pages describe their throatless models as letting material pass without binding while supporting both straight and radius cuts.
Here is the working sequence, in the order it happens on the bench:
- Mark the intended profile — straight line, arc, or freehand curve — directly on the sheet.
- Place the sheet between the blades and steady it on the machine’s base or bed.
- Set the adjustable material guides or backstop where the model provides them; the MPS-3 carries both.
- Swing the handle through its stroke while advancing or rotating the sheet along your marked line.
- Keep the sheet supported and aligned at the cutting point as you feed it.
On the MPS-3, two rotating blades shear only at their closest point, and the guides plus backstop let you repeat a cut at the same setting. Once you finish, the trimmed piece separates cleanly along the marked line with no saw burr.
What Do The Current Models And Capacities Look Like?
Baileigh documents five manual throatless models, and the spread from 14-gauge to 3/16 inch covers most small-shop work. Gauge ratings are the number to read carefully, because they do not climb in a straight line across the lineup.
| Model | Documented Capacity | Listed Price |
|---|---|---|
| MPS-1 | 14-gauge mild steel; 4.25-inch blade; cast-iron frame; roughly 18–19 lb | $499.00 |
| MPS-2 | 10-gauge mild steel; 4.25-inch blade; cast-iron frame | $649.00 |
| MPS-3 | 14-gauge mild steel; two rotating blades; adjustable guides and backstop | $449.00 |
| MPS-5 | 3/16 inch described as 7-gauge; 5.25-inch blade; roughly 75 lb | $1,099.00 |
| MPS-12 | 0.187 inch sheet and 0.236 inch round stock; 12-inch blade; bench-mounted | $399.00 |
Those prices are what Baileigh’s product results displayed when checked; stock and pricing shift. The MPS-5 result currently shows “Call 920-654-4052 for availability” and “Out of Stock.” Baileigh’s manuals page lists documentation for the MPS-1, MPS-2, MPS-3, and MPS-5.
If you are weighing models against your own bench and budget, the tested throatless metal shear roundup puts them side by side against real cutting jobs.
Where Do These Shears Fall Short?
Throatless describes freedom of movement, not extra power — the machine’s rating is exactly what it says. A 14-gauge shear will not suddenly handle 10-gauge stock because the throat is open.
The capacity figures above are mild steel. Baileigh’s pages do not publish a universal material list, so stainless, aluminum, hardened steel, coated stock, and other alloys need the specific model manual or written confirmation before you commit a sheet. Check Baileigh’s MPS-1 throatless shear specifications for the manufacturer’s own wording.
- Wrong alloy, wrong result. A gauge rating earned on mild steel says nothing about 304 stainless of the same thickness.
- Bypassed guides. Skipping the backstop or hold-down on a model that has one costs you repeatability.
- Hands near the blade. Never reach in to adjust the sheet while the handle is mid-stroke; stop, reposition, then cut.
- Forcing a bind. If the material binds or deforms, the machine is over its limit — back off instead of leaning on the handle.
The machines suit small fabrication shops, school classrooms, hobby benches, and metal-art work. The MPS-12 is specifically a bench-mounted unit, so plan for a permanent spot rather than a shelf space.
Common Questions
Do I Need Power For One Of These Shears?
No. Every model described here is manual — the handle supplies the cutting force through leverage. That makes them usable anywhere with a stable bench, including classrooms and garages without dedicated circuits. The trade is arm effort on thicker stock, and the MPS-5 at roughly 75 lb is a two-person lift onto the bench.
Can It Cut Circles And Curves, Or Only Straight Lines?
Both. Removing the throat means the sheet pivots freely around the cutting point, so you rotate it to follow a marked arc or circle in one pass. Straight cuts stay simple too — you just feed the sheet forward along the line. The open blade area is what makes tight curves practical.
What Gauge Mild Steel Can These Machines Handle?
The listed range runs from 14-gauge on the MPS-1 and MPS-3 up to 10-gauge on the MPS-2 and 3/16 inch (described as 7-gauge) on the MPS-5. The MPS-12 is rated for 0.187 inch sheet and 0.236 inch round mild-steel stock. Always confirm the rating against your specific material before cutting.
Sources
- Baileigh Industrial. “Throatless Shear MPS-1” Source for 14-gauge capacity, 4.25-inch blade, cast-iron frame, weight, and price.
- Baileigh Industrial. “Throatless Shear MPS-2” Source for 10-gauge capacity, blade size, and price.
- Baileigh Industrial. “Multi-Purpose Throatless Sheet Metal Shear MPS-3” Source for rotating-blade design, adjustable guides and backstop, and price.