A side mount truck tool box only works if the box’s real dimensions, mounting footprint, and lid swing match your bed, rails, and existing hardware — so measure the truck first and the box second.
A tape measure saves more money than any coupon. Side-mount boxes bolt along the bed rail where clearance is tight, and the difference between a box that swallows your tools and one that stops the tailgate is usually an inch of lid travel or a mounting flange that landed on a stake pocket already spoken for. Work through fit, capacity, material, security, and mounting in that order, and the purchase becomes a short list instead of a wall of product pages.
What Actually Determines Whether A Side Mount Box Fits Your Bed?
Fit is decided by four measurements — bed length, rail-to-rail width at the mounting point, the box’s own length and mounting footprint, and the free space the lid needs to open. Nominal labels mislead here: a WEATHER GUARD Lo-Side Box listed at 87 inches does not automatically suit every 8-foot bed, and two boxes with near-identical advertised length can have entirely different hole patterns. Measure the flat mounting surface on the rail, then the distance from the front of the bed to anything the box would touch — cab, headache rack, fuel filler hardware, trailer plug bracket, or a tie-down you still want to use.
Side-mount designs come in low-side, hi-side, and super-side profiles, and the profile drives more than looks. Low-side boxes sit below the rail line and keep the bed width open for lumber and sheet goods. Hi-side and super-side boxes reach above the rail and buy real volume, but they claim bed width and can block the rear window view. Measure both heights, then decide which trade your load actually needs.
How Much Does Material And Capacity Change The Choice?
Aluminum keeps weight down and fights corrosion on its own; steel adds mass and rigidity but needs its coating watched — chips and scratches are where rust starts. Capacity figures are advertised maximums, not usable space, and the current WEATHER GUARD lineup runs from 7.0 to 11.8 cubic feet, which shows how much spread exists inside one product family. A box rated at 7.0 cubic feet in steel and white (model 165-3-04) and an aluminum Hi-Side at 11.8 cubic feet (model 396-0-02) are not interchangeable purchases — one is a compact rail box, the other changes how you load the truck.
Stack your actual tools in a cardboard box of matching dimensions before ordering. Tool bags compress; hard cases and gun cases do not.
| Box Profile | Stated Capacity | Best For |
|---|---|---|
| Lo-Side, steel, white (WEATHER GUARD 165-3-04) | 7.0 cu ft | Keeping bed width clear for cargo |
| Lo-Side (WEATHER GUARD 178-52-04) | Listed on product page | Compact rail-mounted storage |
| Hi-Side, aluminum (WEATHER GUARD 390-0-02) | 11.1 cu ft | Volume for larger tool loads |
| Hi-Side, aluminum (WEATHER GUARD 396-0-02) | 11.8 cu ft | Maximum volume in the hi-side class |
| Super-Side, steel (WEATHER GUARD 265-3-02) | 10.8 cu ft | Deep storage above the rail line |
| Tonneau cover owners | Varies by model | Low-profile boxes that clear the cover |
| Fifth-wheel and gooseneck trucks | Varies by model | Short boxes that clear hitch hardware |
| Ladder rack trucks | Varies by model | Boxes whose lid clears the rack leg |
Which Security, Weather, And Mounting Details Separate A Good Box From A Regret?
Security and weather resistance are model-specific, so the lock brand is a starting point and not a verdict. WEATHER GUARD’s current truck box lineup promotes its 1KEY ULTRALOCK™ system, with one-key management across boxes and a red push-button indicator that shows locked status at a glance — useful when you’re walking away in a parking lot at dusk. A lock, though, says nothing about water intrusion. Look at the seal type, hinge design, and drain path for the exact model, and trust a stated water-resistance rating over the presence of a latch.
Mounting is where most installs go sideways. Use only the manufacturer’s brackets and fasteners for your specific model, and confirm whether drilling is required before you commit. If it is, get under the truck first: wiring harnesses, brake lines, fuel components, and bed reinforcement ribs live exactly where a drill bit wants to go. Mixing brackets from a different kit, or swapping in hardware the manufacturer didn’t approve, compromises both the box and the rail.
Two limits stay true no matter how good the box: cubic-foot capacity is not a load rating, and a truck’s payload, axle, and bed-rail limits outrank anything printed on the box. Heavy tools concentrated on one side also change how the truck handles. When you’re ready to compare specific models side by side, our tested side mount truck tool box roundup shortlists the ones that survived real mounting checks.
What Do Most Buyers Get Wrong?
Buying by bed length alone is the most expensive shortcut, followed closely by ignoring tonneau covers, racks, and tailgate clearance until the box arrives. Treating advertised capacity as fully usable space, assuming every model shares the same lock and seal, and drilling before checking what sits underneath all recur often enough to be predictable. Full manufacturer specifications for each model are worth reading line by line — WEATHER GUARD publishes dimensions and capacity per model, and the details are not identical across the range. Verify current specs and availability directly on the WEATHER GUARD truck box lineup before you buy.
Common Questions
Can a side mount box work with a tonneau cover?
Sometimes, but only if the box profile stays low enough that the cover’s rails and roll or fold mechanism clear it. Measure the cover’s hardware where it meets the bed rail, then compare that to the box height and lid swing. Low-profile designs are the usual answer; hi-side boxes often conflict. Confirm compatibility for the exact cover and box model before ordering.
Does a steel box rust faster than aluminum?
Steel relies on its coating for protection, so chips and scratches expose bare metal that can corrode, especially in road-salt states. Aluminum resists corrosion on its own and weighs less. Neither is maintenance-free — inspect either material a few times a year and touch up damage promptly. Steel’s extra rigidity is the trade for that vigilance.
Is drilling always required to install one?
Not always, but many side-mount boxes do require drilling into the bed rail or using specified mounting points. Check the model’s installation instructions before purchase. If drilling applies, inspect the underside of the bed for wiring, brake lines, and fuel components first, and use only the manufacturer’s brackets and fasteners rather than generic hardware.
Sources
- WEATHER GUARD. “Saddle and Lo-Side Truck Boxes” Product-family page describing the 1KEY ULTRALOCK™ system and box construction.
- WEATHER GUARD. “178-52-04 | Truck Boxes” Lo-Side Box model page with listed dimensions and specifications.
- WEATHER GUARD. “Model 390-0-02 Hi-Side Box, Aluminum, 11.1 cu ft” Hi-Side aluminum model cited for the 11.1 cubic-foot capacity figure.