How to Use a Steamer for Linens: Step-by-Step Guide?

Steaming linens means draping the fabric over a rod, keeping the steam head about an inch away, and working slowly from the bottom up so the steam rises through the weave.

A creased tablecloth or stiff sheets need moisture and gentle heat, not a hot iron. Steam relaxes linen fibers fast without flattening the texture that makes linen worth owning. These steps follow Conair’s fabric steamer manuals and work on everything from napkins to heavy bedding.

How to Use a Steamer for Linens, Step by Step

Most of the risk lives in the prep, not the steaming.

  1. Fill the tank correctly. Unplug first, then fill only to the maximum line — overfilling is the most common mistake. Conair’s manuals commonly call for distilled water; the GS39 permits tap water thanks to its built-in anti-calcium filter.
  2. Hang or drape the linen. Conair’s GS28 booklet names linens, towels, handkerchiefs, and napkins as suitable items to drape over a rod or towel rack. Curtains get washed, dried per their care label, then rehung and steamed in place.
  3. Keep the hose upright. The GS28 instructions require the hose to stay upright so condensation flows back into the unit; tilting a steamer upward can let hot water leak.
  4. Pretest a hidden corner. Check colorfastness and the fabric’s tolerance for steam before touching the visible surface. Start on the lowest setting where available.
  5. Let it heat on a flat surface. Stand the steamer upright and wait for the ready light or steady steam.
  6. Start low and move up. Begin at the bottom hem so rising steam works through the fabric, then sweep slowly upward. Keep jets pointed away from people.
  7. Hold the linen taut. One hand steadies the fabric, the other runs the head. Several passes usually beat one slow pass on stubborn creases.
  8. Keep about an inch of clearance. Never park the jets on one spot or let the head touch the material.
  9. Dry and store it. Shut off, unplug with dry hands, let it cool, then empty leftover water so nothing leaks in storage.

Which Settings Work for Which Linens?

Match the setting to the fabric’s weight: delicate pieces on low, everyday linens in the middle, heavy bedding on high output with slower passes.

Linen Type Setting Method
Napkins, handkerchiefs Low to medium Drape over a rack, quick upward passes
Sheets, tablecloths Medium Hold taut, two to three passes per section
Heavy bedding High or TURBO BOOST Slow passes; Conair’s GS59X names bedding for TURBO BOOST
Silk, velvet Lowest available Never touch the head to the fabric; test first
Synthetic or coated Lowest available Hidden-area test before any visible panel
Curtains Medium Wash and dry first, then steam while hung
Fine or vintage linen Low Test an inside seam, then short passes

The GS39’s HI setting is built for heavier or badly wrinkled fabric, while LOW plus the delicate bonnet suits finer goods. The GS59X carries five settings, and its lowest is the place to start with anything unfamiliar. If you’re still weighing models, this roundup of steamers suited to linens and bedding lays out the differences in tank size and heat output.

Which Fabrics and Mistakes Cause Trouble?

Steam is safe on most washable linen, but silk, velvet, coated textiles, and anything dyed without colorfastness need a hidden test first. The care label outranks the steamer every time.

  • Skip the test and a non-colorfast dye can bleed the moment steam hits it.
  • Press the head down and heat plus moisture can shrink, melt, or shift the color of the fabric.
  • Steam on the body — never steam a garment while someone is wearing it. Steam burns skin, eyes, and scalp.
  • Work near water in a bathroom sink or tub and you invite a shock hazard; keep the unit in a dry area.
  • Store it wet and leftover tank water leaks out later, sometimes onto the shelf below.

Conair’s GS28 booklet is the reference for upright hose use and for repeated passes on heavier fabrics; read the full GS28 fabric steamer instructions for exact wording.

Common Questions

Can steam replace ironing on linen?

For most wrinkles, yes. Steam relaxes fibers and lifts creases without the flattened, polished finish an iron leaves. Deeply set creases in heavy linen may still want a light press; some people steam first, then iron only the hems and collar bands.

How long does a steamer take to heat up?

Larger floor models can take longer. Wait for the ready indicator or steady steam before you start.

Should I use distilled water in a fabric steamer?

Follow the manual for your model. Distilled water limits mineral buildup over time, which matters in hard-water areas. The GS39 allows tap water because it has a built-in anti-calcium filter. Never overfill past the maximum line, whichever water you choose.

Sources

Scroll to Top