Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your truck bed is the one place you cannot afford to lose space, and a box that spans the full width steals it. A side-mount box bolts along the bed rail instead, keeping the middle of the bed free for plywood, pallets, or a motorbike. Surviving rain, road grit, and a slamming tailgate depends on two specs: aluminum thickness and lid sealing.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You’ll see the exact tub thickness, lid design, and mounting hardware spelled out in plain terms below, so you can judge whether a box truly fits your rail.
Top Picks



How To Choose The Best Side Mount Truck Tool Boxes
Fitment decides whether a side mount box works on your truck. Before you read a single spec, measure the flat section of your bed rail — the box clamps or bolts there, and it has to sit flush without rubbing the cab or blocking the tailgate.
Measure your rail before anything else
Most of these boxes mount along the top of the bed rail and drop down into the bed, which is why the overall length in inches is the first number that matters. A 36-inch box suits a short bed; an 88-inch box is a full contractor-length rail. Check the width too — a wider box eats into the load you can still carry.
Thick aluminum versus thin aluminum
Aluminum is the standard here because it will not rust like steel, but wall thickness decides how it holds up when a load shifts against it. The aluminum tubs on this list range from 0.056-inch to 0.058-inch — small differences in number, noticeable differences in how solid the wall feels when you press it.
Seals, hinges, and why your tools get wet
Water enters through the lid seam, not the tub. A closed-cell foam gasket or a rubber weather seal, paired with a crowned lid that sheds water outward, is what keeps rain and road spray out. Look for a full-length hidden hinge, since that keeps the pivot point away from the weather.
Side-by-Side Comparison
| Model | Best For | Dimensions (L x W x H) | Material | Lock Type | Amazon |
|---|---|---|---|---|---|
| Aluminum 36 Inch Side Mount Tool Box (BeoneYuu)★ Best Overall | Short-bed daily drivers | 36″ x 12.2″ x 12.8″ | 0.058″ welded aluminum | Push-button handle, 2 keys | Amazon |
| Side Mount Truck Tool Box 41″ (bchsadvb)Toughest Tread | Mixed fleet duty | 41″ x 17″ x 13″ | 5-bar tread aluminum | Keyed latch | Amazon |
| Dee Zee DZ8748 Red LabelSealed For Weather | Long-haul weather duty | 48″ x 12.7″ x 11.1″ | 0.056″ Brite-Tread aluminum | Stainless paddle handle | Amazon |
| 36 Inch Side Mount Tool Box 2 Pack (Vigorighter) | Pairing both bed rails | 36″ x 12″ x 12″ (each) | 0.058″ welded aluminum | Keyed stainless handle | Amazon |
| Better Built 79011019 | Narrow rail slots | 14″ x 13″ x 51″ | Powder-coated multi-material | Lockable | Amazon |
| UWS TBSM36 | Two-side access security | 41″ x 14″ x 13″ | Aluminum, foam-filled lid | Dual twist handles | Amazon |
| UWS EC30071 RigidCore | Lid strength on a budget rail | 36″ heavy-wall aluminum | 0.058″ welded aluminum | Stainless steel handle | Amazon |
| 60 Inch Contractor Top Side Box | Contractor drawer organization | 60″ x 13.3″ x 21″ | Striped aluminum, powder coat | Stainless folding latch | Amazon |
| Buyers Products 1702950 | Full-length steel rail | 88″ x 13″ x 16″ | 16 Ga alloy steel | Stainless T-handle | Amazon |
Detailed Reviews
1. Aluminum 36 Inch Side Mount Tool Box
Our pick — 4.5+★ from 20+ verified ratings; the strongest balance of quality and price.
A compact aluminum side box that tucks low against the rail and leaves your bed floor alone.
If your truck has a short bed and you still need to haul sheets of plywood, this is the box that solves the puzzle. The tub is welded 0.058-inch aluminum, which is the same wall thickness the pricier UWS EC30071 uses — so the strength per wall sits in the same league, not a step under it. The weather strips run around the lid, so a rain shower does not funnel onto your sockets.
At 36 inches long, 12.2 wide, and 12.8 tall, it sits down inside the bed rather than above the rail, which keeps your side mirrors clear. You get two keys with the push-button handle, so the lid pops open with one thumb while the latch still holds against a pry bar. The maker offers it in 36, 48, and 60-inch lengths, so if your rail is longer you are not stuck with the compact.
The catch is honest: a compact tub means less room. If you carry a full socket set, a jack, and a chainsaw, this one will fill up fast. It is a daily-driver organizer, not a mobile workshop. The crowd verdict on this one runs 4.5+ stars across 20+ ratings, which lines up with what the spec sheet says about the wall thickness and sealing.
What earns its keep
- 0.058-inch welded aluminum tub, the thicker end of this list
- 36-inch length frees the bed floor for hauling
- Weather strips plus a push-button lockable handle
- Comes with two keys and a lift-off lid
Where it falls short
- Compact 36 x 12.2 x 12.8 inch footprint holds less than a full-width chest
- Silver finish shows scuffs more than a black powder coat
Reach for this if: you drive a short-bed truck and want a low-profile organizer that does not eat your cargo space.
Look elsewhere if: you need to fit a full tool kit plus power tools — go longer in the same family.
2. Side Mount Truck Tool Box 41″X17″X13″
The ribbed-tread box built to shrug off gravel spray and a gravel-road beating.
The defining feature here is the 5-bar tread pattern stamped into heavy-duty textured aluminum. Those raised bars stiffen the panel and take the scuffs that would otherwise scratch a smooth face, which matters if your truck sees job sites and dirt roads. At 41 x 17 x 13 inches it is a touch wider than the 36-inch BeoneYuu above — you get more shoulder room for longer tools, at the cost of a little bed width.
It is a keyed latch closure with a solid lid, and the maker lists it for trucks, RVs, ATVs, trailers, flatbeds, and garages — so it does not have to live on a truck at all. The textured black finish hides dust better than polished silver. That is a real-world point, not a cosmetic one, since a box that looks clean longer is one you stop worrying about.
The honest trade-off: a latch closure and keyed lock is straightforward, but it is not the dual-handle system you find on the UWS picks further down. If you regularly open both sides of a long box, this one wants you to walk around. It holds a 4.0+ star read, and the ridge tread is what most buyers talk about first.
What stands out: the 5-bar tread (raised ribs pressed into the aluminum) turns a flat wall into a ribbed one, so a swinging shovel hits a raised bar instead of denting sheet metal. The weather-resistant textured coating keeps rust-prone steel out of the picture entirely.
What to weigh: 41 inches long and 17 wide is a bigger footprint than a compact 36-inch box, so measure the gap between your rail and the wheel well before ordering.
Suits: anyone who parks a truck on gravel, hauls on dirt roads, or wants a box that can jump between an RV and a flatbed.
Think twice if: you want one-handed lid access from the driver’s seat — this latch wants a key turn.
3. Dee Zee DZ8748 Red Label Side Mount Tool Box – 48″
A crowned-lid box that sheds rain by design, backed by a lifetime warranty.
The single design decision that sets this one apart is the crowned lid — the top arcs upward so water rolls off the edge instead of pooling at the seam. A closed-cell foam gasket runs underneath, and that combination is the recipe for keeping moisture out. It is built from non-rusting 0.056 Brite-Tread aluminum, which is a hair thinner than the UWS 0.058-inch tub but still welded plate, not roll-formed sheet.
At 48 x 12.7 x 11.1 inches and 23.5 pounds, it is the longer sibling of the 36-inch BeoneYuu above, so it swallows a full-length level or a breaker bar. The stainless steel paddle handle latches are listed as contractor grade, and a three-piece body with internal bends adds stiffness along the spine. There is a limited lifetime warranty attached, which is not common at this price tier.
The one thing to know: that 11.1-inch height is the shallowest on this list for its length, so a deep toolbox will not sit upright inside. The crowned lid also means you cannot stack heavy gear on top without a strap. The crowd read is a 3.5+, so a fair share of buyers walk into the fitment question expecting a bigger interior than the 48-inch body delivers.
Why owners keep it
- Crowned lid plus closed-cell foam gasket pushes water away from the seam
- 0.056 Brite-Tread aluminum will not rust
- Limited lifetime warranty from the manufacturer
- Contractor-grade stainless paddle handle latches
The honest caveats
- 11.1-inch height is shallow — deep boxes will not stand upright
- 48-inch length demands a full-length bed rail
The strong case: a weather-first box for a truck parked outside year-round, with a lid engineered to shed water.
The catch: measure your tallest tool before buying — the shallow 11.1-inch interior surprises people.
4. 36 Inch Side Mount Tool Box 2 Pack
Two matching boxes, so one goes on each rail and you stop playing tetris with your cargo.
Most side mount boxes make you choose a side. This listing gives you two, each a 36 x 12 x 12 inch tub in welded 0.058-inch aluminum — same wall thickness as the UWS EC30071 and the BeoneYuu at the top. Put one on the driver’s rail for hand tools and one on the passenger rail for straps and recovery gear, and your bed floor stays open from wall to wall.
Each box has a keyed lock and a stainless steel handle, and the lid opens 90 degrees so you can reach in without scraping your knuckles. At 22 pounds per box they clamp on without dragging the rail down. The weatherproof claim plus the black finish means they are built for outdoor duty, not a controlled garage.
Here is the buyer reality: buying two boxes means two keyed locks, and if you carry both keys on one ring you have a matched pair — but if you lose one, that box is a hassle to open. Check whether the keys are cross-compatible before you commit. A 4.0+ star read says most buyers are satisfied with fit and finish at the two-pack level.
The real advantage: twin 36 x 12 x 12 inch tubs let you split tool types by side, so a full socket set never mixes with oily tow straps. Both lids open to a full 90 degrees for straight-down access.
The real caveat: 12-inch height is on the shallow end, so a tall power tool will lie flat instead of standing.
For the two-rail planner: you want symmetric storage and do not mind buying in a pair to get it.
Skip if: you only have one usable rail — one box would sit on a shelf.
5. Better Built 79011019 Side Mount Tool Box
A 14-inch-wide tub that slips into a tight rail slot where wider boxes will not go.
The spec that jumps off the sheet is the 14-inch length paired with a 51-inch height — this is the narrow-slot box of the group, built for a rail where a 36 or 48-inch tub would not seat. At 24 pounds versus 20 pounds for the UWS TBSM36, the extra mass sits in the body rather than the lid. The powder-coat finish is there to hold up against road grit and sun.
Better Built rates it for 80 kg of maximum weight recommendation, which is a meaningful ceiling if you plan to load it heavy. One compartment keeps the layout simple — no drawers to jam. It carries a 4.0+ star read, which puts it in the upper tier of this group for buyer satisfaction.
Be honest about the trade: a 14-inch footprint is a narrow interior. A long breaker bar will not lay flat. This is a box for wrenches, gloves, straps, and small parts, not for hauling lumber hardware. The upside is that a narrow box on a rail leaves more bed width for the load you came for.
Go with this when: your rail is short or narrow and the bigger bodies simply will not fit without rubbing.
Not for: long-handled tools — the 14-inch interior will not lie them flat.
6. UWS TBSM36 Side Mount Truck Box
One lock handle, two sides of the truck — the connecting rod changes how you work.
Most boxes make you walk around. This UWS uses a connecting rod so you can open the lid from the driver or passenger side with the same dual twist handle. The interior rod enclosure keeps that linkage from bending or jamming, which is the weak point on cheaper dual-access designs. At 41 x 14 x 13 inches and 20 pounds, it is the lightest body in the premium tier, against 24 pounds for the Better Built 79011019.
The patented foam-filled lid resists bending and warping, and 2.2 cubic feet of capacity handles a working tool load. A limited lifetime warranty covers it. What wins people over is the build — the quality of the tub and the lid construction is the thing most owners talk about, and the locking system earns its own praise alongside it. The gas struts that shoot the lid up get a mention too, since they hold the lid open while you dig.
The mixed note is size. Several buyers expected more interior room than the 2.2 cubic feet delivers. Treat the TBSM36 as a 36-inch-class side box, not a full bed chest, and the fitment surprise disappears. The crowd read holds a 4.4, in line with the UWS EC30071 below.
What owners value: the connecting-rod dual access saves a lap around the truck every time you need a tool, and the foam-filled lid stays rigid so the seam does not warp open over a hot summer.
Where expectations wobble: 2.2 cubic feet is real, but it is not a cavern — plan on the 41-inch body being a working organizer rather than a deep chest.
Worth it for: someone who loads from both sides and wants one lock handle to do the work.
Reconsider if: bulk storage is the goal — 2.2 cubic feet fills up quickly with power tools.
7. UWS EC30071 36-Inch Truck Side Tool Box
The thickest aluminum on this list, with a lid filled solid so it will not warp.
Two specs carry this box. First, the one-piece tub is welded 0.058-inch aluminum — that edges out the Dee Zee’s 0.056-inch plate on wall thickness. Second, the patented RigidCore lid is foam-filled solid, which stops the top from binding on the frame when you close it. A MicroSeal gasket runs under that lid. Together, the lid and gasket are the weather-defense line, and 62.3 litres of capacity is the interior you get behind them.
At 36 inches it fits the same short-bed slot as the BeoneYuu up top, so if you want the thicker tub and the RigidCore lid, this is the upgrade path. At 21 pounds versus 20 pounds for the TBSM36 above, it stays light, and a stainless steel handle with a lock gives you a solid latch point. A limited lifetime warranty backs it, with a separate one-year finish and one-year parts window.
The thing to plan for: it lists assembly required, and the instructions are not detailed. Allow an afternoon if you are installing it into a bed without predrilled holes. The buyer read lands at 4.4, which matches the other UWS in this group.
Bed this in: a 36-inch rail where you want the thicker tub and a lid that stays flat instead of warping.
Set aside time: assembly and mounting are on you — the instructions are thin, so budget a full afternoon.
8. 60 Inch Contractor Top Side Boxes
Part toolbox, part drawer cabinet — this is the contractor’s mobile command center.
Sixty inches long, 21 wide, and 13.5 tall, with three compartments and two lower drawers. This is the only box on the list with drawers, which changes how you work: small parts live in the drawers, big tools live in the main cabinet, and you are not digging through a pile to find a bit. At 60 x 13.3 x 21 inches in the listed spec, it is the widest body here by a long stretch — wider than the 36-inch Vigorighter pair’s 12-inch tub by a wide margin.
The drop door opens to full access, and a weather guard rubber seal plus a hidden hinge and gasket system keep water and grime away from the contents. Aircraft-grade cables stop the lid from slamming or over-extending in transport. The metallic stripe tread adds rigidity along the panels, and a powder coat inside and out handles corrosion. At 88.2 pounds it is not a one-person lift, so plan the install with a helper.
Drawbacks are real: at 88.2 pounds, and with three compartments plus drawers, it is heavy and it is long. A short bed will not take it. And the price tier is premium. It holds a 4.0+ star read, which is impressive for a box this large and this specialized.
Why contractors take it: two lower drawers turn a tool box into an organized workbench on wheels, while the drop door and full-access lid mean no more excavating to reach a socket.
Fitment reality: 60 inches long and 88.2 pounds means a long bed and a helper, not a solo bolt-on job.
Made for: a full-size long-bed truck where you want drawers for parts and a big cabinet for the rest.
Not for: short beds or solo installs — 60 inches of body and 88.2 pounds need room and hands.
9. Buyers Products 1702950 Topsider Truck Box
An 88-inch steel rail that runs the full length of a long bed and mounts without drilling.
This is the biggest body in the group — 88 x 13 x 16 inches, in 16 Ga steel with 14 Ga steel drop doors. That is a different material philosophy from every aluminum tub above: steel is heavier, 136 pounds here, but it is stiffer under load. Dual recessed drop doors with hidden continuous hinges, stainless T-handles, and replaceable gasket seals round out the weather and security package. It mounts with the included hardware, and the no-drill J-hooks plus side-rail pads let you install without cutting into the bed rails.
The honest picture is mixed. Build quality is the strongest thread, and the black powder-coat finish is meant to resist corrosion. But this is the pick with the most caveats on this list — the door mechanism, the rust resistance over time, and leakage all draw criticism, and the size-to-finish expectation is the recurring story. The buyer read sits at 3.5, the lowest in this group. A tray for small parts is sold separately.
So who is it for? Someone with a full-length long bed who wants a steel top-rail box that spans the whole side and does the job without the aluminum premium. If you are willing to keep the gaskets fresh and the powder coat touched up, it is a workhorse. If you want set-and-forget weather sealing, the UWS boxes above are more forgiving.
What it gets right
- 88-inch length spans a full long-bed rail
- 16 Ga steel body with 14 Ga drop doors for stiffness
- No-drill J-hooks and side-rail pads protect your bed rails
- Replaceable gasket seals and stainless T-handles
What to watch
- 136 pounds — a two-person install
- Door mechanism, rust resistance, and leakage draw the mixed notes here
- Tool tray sold separately
The case for it: a full-length steel rail box for a long bed, with no-drill mounting that keeps your rails intact.
The case against: it needs gasket and finish upkeep, and the 136-pound body wants a second set of hands.
Know the Specs
Aluminum thickness in inches
Aluminum is measured in thickness, and the tubs here that list a wall thickness land at either 0.056 or 0.058 inch. That tiny difference is the wall you push against when a load shifts, so a 0.058-inch welded tub like the UWS EC30071 is the stiffer choice, while the 0.056-inch Dee Zee still gets you non-rusting Brite-Tread plate. Thicker is not automatically better for you — it also adds weight.
Lid design and gaskets
The lid is the weak point for weather sealing. A crowned lid sheds water outward, a closed-cell foam or MicroSeal gasket seals the seam, and a hidden or continuous hinge keeps the pivot away from rain. A foam-filled lid like UWS RigidCore also stops the top from warping. When you shop, ask how the lid sheds water, not just whether it locks.
Length and how it fits your rail
Side mount boxes run from 14 inches to 88 inches long. The length has to match your usable bed rail and leave room for your cargo. A compact 36-inch box keeps your bed floor open, while an 88-inch steel rail covers a full long bed. Always measure the flat section of rail before ordering.
Lock and latch types
A lockable latch protects your gear, and the designs here range from a push-button handle with two keys to a dual twist handle with a connecting rod, a stainless T-handle, and a keyed latch. A connecting rod lets you open from either side; a T-handle pulls the lid tight for a weather-resistant seal. Match the latch to how often you use the box.
Common Questions
Will a side mount tool box fit under my tonneau cover?
Is aluminum or steel better for a side mount truck tool box?
Do these boxes require drilling into my truck bed?
How much weight can a side mount box hold?
Will a side mount box keep rain out of my tools?
What is the difference between a side mount and a cross-bed tool box?
Can I mount two side boxes, one on each rail?
How long does a side mount tool box last?
Do the drawers on a contractor box lock separately?
The Bottom Line
The easiest call in this group is the Aluminum 36 Inch Side Mount Tool Box — it pairs the thicker 0.058-inch welded tub with a 36-inch body that keeps your bed floor open, and it carries the top buyer rating here at 4.5+ stars. If you want the extra width for longer tools, the 41-inch 5-bar tread box is the tougher-surface pick. And when your rail runs the length of a long bed, the 60 Inch Contractor Top Side Box with its two lower drawers is the one that turns your bed into a mobile workbench.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




