What Is Schedule 40 Steel Pipe and What Does the Schedule Rating Mean?

Schedule 40 steel pipe is a standard wall-thickness series, not a pressure rating — for NPS 2, that means a 2.375-inch outside diameter and a 0.154-inch nominal wall.

A hardware clerk hands you a length of pipe and calls it “forty.” What that number actually buys you is a wall thickness that shrinks your bore, adds weight, and raises what the pipe can hold — with the number itself promising none of it. The schedule is a dimensional label attached to a nominal pipe size, and reading it that way clears up nearly every argument at the supply counter.

What Does The Schedule Number Actually Measure?

The schedule designates nominal wall thickness for a given nominal pipe size (NPS), not strength, material, or a maximum working pressure. For a fixed NPS, a higher schedule generally means a thicker wall, a smaller internal bore, and more weight per foot.

The same schedule number does not produce the same wall at different sizes. Schedule 40 pipe at NPS ½ has a 0.109-inch wall; at NPS 6 it has a 0.280-inch wall. The outside diameter, meanwhile, stays standardized for each NPS while the bore shrinks as the wall grows. NPS 4 Schedule 40 carries a 4.500-inch OD and a 0.237-inch wall; Schedule 80 holds that same OD with a 0.337-inch wall.

Two naming traps sit right here. NPS is a designation, not a measurement — NPS 2 pipe is 2.375 inches across the outside, not 2. And for NPS 10 and smaller, “Standard” wall and Schedule 40 are generally the same thing, an equivalence that stops applying on larger pipe.

Schedule 40 Steel Pipe Dimensions: The Numbers That Matter

Stainless pipe follows a separate standard, ASME B36.19M, where the designation “40S” is not automatically interchangeable with carbon “40” in every size.

Nominal Pipe Size Outside Diameter / Wall / Bore Weight
NPS ½ 0.840 in / 0.109 in / 0.622 in 0.85 lb/ft
NPS 1 1.315 in / 0.133 in / 1.049 in 1.68 lb/ft
NPS 2 2.375 in / 0.154 in / 2.067 in 3.65 lb/ft
NPS 4 4.500 in / 0.237 in / 4.026 in 10.79 lb/ft
NPS 6 6.625 in / 0.280 in / 6.065 in 18.97 lb/ft
NPS 4 (Sch 80) 4.500 in / 0.337 in / smaller bore heavier
NPS ½ (Sch 80) 0.840 in / 0.147 in (approx.) heavier

Those figures are nominal. ASTM manufacturing tolerances apply, so a tape measure will rarely match the chart to the thousandth. The published steel pipe dimension tables are the reference to check against rather than a caliper alone.

Does Schedule 40 Mean A Pressure Rating?

No. Schedule 40 alone establishes no maximum working pressure, because allowable pressure depends on the material grade, temperature, corrosion allowance, pipe dimensions, weld quality, threads, fittings, valves, and the governing code. A thicker schedule improves pressure and mechanical resistance — it does not make a corroded or wrongly specified system safe.

Material specification is a separate line on the order. Common carbon-steel grades include ASTM A53 (welded or seamless, with grades and types such as Grade B and Type F) and ASTM A106 for seamless high-temperature service, which suits bending and flanging. Both A53 Grade B and A106 Grade B list 60,000 psi minimum tensile and 35,000 psi minimum yield. A complete callout reads like “NPS 2, SCH 40, ASTM A53 Grade B, seamless, plain end” — schedule, material, grade, manufacturing type, and end condition, per published pipe catalog specifications.

Typical Schedule 40 service covers water, compressed air, HVAC, fire protection, process lines, and structural work, all subject to the applicable US code. Swapping in structural tubing, galvanized utility pipe, stainless 40S, or a different ASTM grade without confirming dimensions, chemistry, joining, and code compatibility is how projects fail inspection.

What Drives The Price Of Schedule 40 Pipe?

Price swings with size, grade, finish, quantity, location, coating, and market date, so any figure is context rather than a quote.

Those are list entries, not guaranteed transaction prices. The same workbook shows a zero net-price field, so treat them as a starting reference and confirm delivered pricing before ordering. If you are weighing specific sizes and grades for a project, our tested schedule 40 steel pipe roundup breaks down the options side by side.

Two safety notes travel with the purchase. Cutting or welding galvanized pipe requires controlling zinc-fume exposure and following occupational-safety procedures. Carbon-steel pipe in corrosive service needs verified compatibility, lining, or a wall allowance — and when traceability matters, ask for the manufacturer’s marking, certificate of compliance, and mill test report.

Common Questions

Is Schedule 40 pipe the same as 40S stainless?

Not automatically. Carbon-steel Schedule 40 is dimensioned under ASME B36.10M, while stainless pipe follows ASME B36.19M and uses the “40S” designation. A 304 stainless NPS 2 Schedule 40 pipe lists the same 0.154-inch wall, 2.375-inch OD, and 2.067-inch ID, but you should not assume interchangeability across every size, grade, or joining method.

Can I use Schedule 40 pipe for compressed air?

Often yes, but never on the schedule number alone. Compressed air is a stored-energy system, so the allowed pressure depends on material grade, temperature, wall thickness, fittings, threads, and the governing code. Confirm the full specification with a qualified engineer before pressurizing any line.

Why is NPS 2 pipe larger than 2 inches?

Nominal Pipe Size is a designation, not a measurement. NPS 2 pipe measures 2.375 inches across the outside diameter. The outside stays standardized for each NPS while the wall thickness changes with schedule, which is why the bore — 2.067 inches at Schedule 40 — shrinks as the schedule rises.

Sources

Scroll to Top