Replacing Smoke Hollow grill parts starts with finding your exact model number on the data plate, because burner tubes, heat shields, and igniters are cut to specific models and a guessed part usually will not fit.
A burner tube that is two inches off or a heat shield with the wrong mounting holes turns a ten-dollar fix into a return label and a second weekend without the grill. Fitting the right part to a Smoke Hollow grill takes one afternoon of careful checking, and the first check is not the part at all — it is the label.
Find the Model Number Before You Order Anything
The model number is the single fact that decides which part you can buy, and it lives on a metal data plate riveted to the grill — usually inside the cabinet door, on the back of the firebox, or under the side shelf.
Copy three things off that plate: the model name, the model number, and the serial number if one is stamped. Smoke Hollow built gas grills across many model years, and components were changed between them, so “Smoke Hollow burner” as a search term returns parts that fit some units and not others.
If the plate is illegible or gone, check the owner’s manual that came with the grill, the sticker inside the cabinet, or the original purchase receipt. A photo of the plate stored on your phone saves a trip back outside when you are standing in a store aisle.
- Model name — the series printed on the plate, not the retail product name.
- Model number — the alphanumeric code, often starting with letters like “GS” or “BH”.
- Serial number — narrows the production run when a part changed mid-year.
- Fuel type — propane, natural gas, charcoal, or electric; each uses different valves and fittings.
Identify the Failed Part and Its Part Number
Match the part number, not the part description, because two burners that look alike can differ in length, bracket spacing, and gas orifice size.
The owner’s manual for your exact model contains an exploded parts diagram with numbered callouts. That diagram is the reference to work from — find the failed component on it, read the callout number, and search that number plus your model number. A weak flame across one burner, a clicking igniter that will not spark, or a rusted-out heat shield each trace back to a specific line on that diagram.
Common failure points on a gas grill include burner tubes that rust through at the air inlet, heat shields that warp and flake, igniter electrodes that carbon up, and grease trays that crack at the weld. Look at the part that is actually broken rather than replacing a whole assembly, since individual burners and igniters are usually sold separately.
Where to Buy Parts That Fit: What Actually Works
Buy from the manufacturer’s parts channel or a supplier that lists parts by model number and shows the fitment in the listing — a listing that only says “fits most Smoke Hollow grills” is a gamble.
Search your model number and callout number together, then read the fitment note in the listing before adding to cart. A supplier that publishes a parts diagram alongside the part is showing you its work, and that is the signal to trust. Many aftermarket sellers stock burners, heat shields, and igniters by model year, so confirm the year on the plate matches the listing.
If you would rather compare tested options in one place, our roundup of Smoke Hollow replacement parts groups the components by grill series so you can match before you order. For hard-to-find parts on a discontinued model, the manufacturer’s customer service line is worth one call — they can confirm whether a part is still stocked or whether a compatible successor model exists.
| Failed Component | What to Confirm Before Ordering | Where It Lives |
|---|---|---|
| Burner tube | Length, bracket hole spacing, orifice size | Under the cooking grates |
| Heat shield | Mounting tab pattern, width | Above the burner, below grates |
| Igniter electrode | Wire length, connector type | Beside the burner tube |
| Cooking grate | Overall dimensions, corner shape | Top of the firebox |
| Regulator and hose | Fuel type, connection style | Tank to manifold |
| Grease tray | Slide width, depth | Bottom of the cabinet |
Install It Safely and Test Before You Cook
Shut the gas off at the tank, disconnect the hose, and work on a cool grill — and follow the owner’s manual for the specific replacement sequence, because fastener locations differ between models.
For a burner tube, lift out the cooking grates and heat shields, unscrew the retaining pin or screw at the burner’s rear bracket, and slide the tube off the valve orifice at the front. Seat the new tube fully onto the orifice, reinstall the fastener, and check that the tube sits level and the gas ports face up. Igniter electrodes mount on a bracket close to the burner with a small gap to the tube, and the wire runs to the collector box.
A regulator or hose replacement is not a universal swap — the connection style and pressure rating must match the grill and the fuel type. If the regulator label does not match your model, stop and confirm with the manufacturer rather than adapting fittings.
Before cooking, open the lid, turn the gas on at the tank, and listen and smell for leaks at every joint. A soapy-water test at the connections shows bubbles if gas is escaping. Once it passes, light the burners and confirm an even blue flame along each tube — a yellow, lazy flame or a burner that will not light means the tube is misaligned on the orifice or the wrong part is installed.
Common Questions
Can I use a universal burner in a Smoke Hollow grill?
Only if the length, bracket spacing, and orifice size match your model exactly — and that is rare across the full Smoke Hollow lineup. A universal burner that is slightly short may not reach the valve orifice, and one with the wrong orifice will run too rich or too lean. Match by model number first.
Where is the model number on a Smoke Hollow grill?
Look for a metal data plate inside the cabinet door, on the rear of the firebox, or beneath a side shelf. It lists the model name, model number, and usually the serial number. If the plate is unreadable, the owner’s manual or the original receipt will carry the same information.
Are parts still available for a discontinued Smoke Hollow model?
Some are, through aftermarket suppliers who stock by model year, and some are not. Call the manufacturer’s customer service with your model number before assuming a part is gone, and ask whether a compatible successor model shares the component. Buying a used part from a donor grill is a legitimate last option if the fitment matches.
Replacing Smoke Hollow grill parts comes down to one rule that saves money: read the data plate, pull the callout number from your model’s parts diagram, and buy only what the fitment note confirms. A part that matches the model number installs in minutes; a part that almost matches costs you a return and a weekend.
Sources
- Smoke Hollow. “Smoke Hollow Grills — Official Site.” Manufacturer source for model identification and owner’s manuals.