Sizing track pants for a tall frame starts with two numbers, waist and a measured inseam, because height alone can’t predict how long your legs actually are. Tall cuts run roughly 34 to 40 inches.
Two men both standing 6’3″ can need pants two inches apart in leg length, and that gap is exactly where standard sizing falls apart. Sizing up to an XL adds width, not length, so the hem still rides above your shoe. The working method is to measure what already fits, then match that number against a brand’s tall size chart instead of guessing from the letter on the tag.
Measuring The Two Numbers That Decide The Fit
Measure your waist and your actual inseam, then pick the length category that matches the inseam rather than your total height. The inseam runs from the crotch seam straight down to the hem, and per SCHEELS it is the measurement that sets leg length, not the outseam that runs from waistband to hem.
- Waist: wrap a flexible tape around your natural waist, or wherever the waistband will sit, and keep it snug but not tight.
- Inseam: lay a pair that fits you well flat on the floor, expose the inside leg seam, and measure from the crotch seam down to the hem.
- Hem target: decide whether you want the pant at the ankle, just above it, or breaking over the shoe. That choice moves the number you need.
- Chart check: compare waist, hip, and inseam ranges on the brand’s chart. Vans’ measuring guide notes that letter sizes are not standardized across makers, so treat “Tall” as a starting point, not an answer.
Skip measuring in shoes, and skip measuring a baggy old pair you never liked. Reproducing a bad fit just locks in the error. Stand straight, keep the tape flat against the fabric, and read the number twice.
Matching Inseam To Tall Length Categories
Tall-specific athletic pants typically list fitted inseams from about 34 to 40 inches, and the category names map to those numbers. Standard US men’s pants generally top out around 38 inches, so a genuine tall cut is doing something a regular pair can’t.
| Length Category | Fitted Inseam | Height Range Typical |
|---|---|---|
| Semi-Tall | 34–35 in | 6’0″–6’3″ |
| Tall | 35–37 in | 6’3″–6’7″ |
| Extra Tall | 38–40 in | 6’8″–7’1″ |
| Tall (single inseam models) | 34, 36, 38, 40 in | Varies by leg length |
| Lululemon City Sweat Jogger Tall | 36–38 in | Sits just above the ankle |
| Tall jogger/wide-leg lines | 34–40 in | 6’3″–7’1″ |
| Standard (non-tall) men’s pants | 28–38 in | Not cut for tall frames |
Read those ranges as brand examples, not universal rules. For a broader look at tested options, browse our roundup of track pants for tall guys.
Rise, Hip Room And The Sizing-Up Trap
A long enough inseam still produces a poor fit if the rise, hip room, and cuff placement are wrong. Tall-specific pants adjust those proportions for longer legs and torso, so the crotch actually sits where it should.
Buying a size up is the most common wrong turn. It widens the waist and hips without reliably adding leg length, and per SCHEELS’ inseam and outseam explainer those are separate measurements that don’t move together. Check the drawcord and elastic waistband for fit flexibility, check the taper through the calf, and check where the cuff lands on your shoe. A hem dragging on the ground is both a tripping hazard and quick wear.
Before you order, confirm the live product page, the size chart, the fabric content, and the return policy. Sale prices and stock shift by location, and “tall” on a label guarantees nothing about inseam. When a pair arrives long, hemming is a five-minute fix at a tailor. When it arrives short, there’s no fix at all.
Common Questions
Can I just buy a size up instead of hunting for a tall cut?
Sizing up adds width and hip room without reliably adding leg length, so the hem usually still lands too high. That’s why tall-specific cuts exist: they build the extra length into the pattern instead of stretching the whole garment sideways. If you are between sizes, go by the inseam on the chart first and treat waist as the secondary adjustment.
Should I measure my inseam standing or with existing pants?
Either works if you do it carefully. Laying a well-fitting pair flat and measuring the inside seam from crotch to hem is the easiest method, because it shows exactly what length you want. If you measure on your body, stand straight, keep the tape flat, and leave your shoes off so the reading isn’t skewed.
Why do two brands list “Tall” at different inseams?
Because there is no industry standard for the word. One line may call 34–35 inches Semi-Tall and another may call the same number Tall. Manufacturers set their own category names and height ranges, so always read the fitted inseam figure in inches. That number, not the label, is what you compare against your own measurement.
Sources
- Vans. “How to Measure for Pants” Covers waist and inseam measuring steps and the lack of standardized letter sizes.
- SCHEELS. “Inseam vs. Outseam” Explains the difference between inseam and outseam measurements.
- Lululemon. “City Sweat Jogger Tall” Product page for a tall jogger sized for a 36–38-inch inseam.