How to Choose a Waterproof Case for iPhone 13? | Match Case to Exposure

An iPhone 13 case only protects the phone from water when the manufacturer lists a depth and time limit and it is made for the exact model—iPhone 13, 13 mini, 13 Pro, or 13 Pro Max.

A dropped phone in a lake has two failures stacked: the case was built for a different model, and it was never rated for submersion. Waterproofing comes down to matching the case to the model and to the water the phone will actually meet.

Apple rates all four iPhone 13 models IP68 under IEC standard 60529—6 meters for up to 30 minutes, tested in a lab. That is dust and splash resistance, not a diving licence. The case has to carry the rest.

Step 1: Confirm Which iPhone 13 You Own

Case compatibility is model-specific, not family-wide. The four models differ in body dimensions, camera modules, button placement, and lens openings.

Check Settings > General > About and read the Model Name line. A 13 Pro case will not seal on a 13 Pro Max, and a misaligned camera cutout can break the seal or block the lens. Assume nothing crosses over within the line.

Step 2: Define the Water You’ll Actually Meet

Buy for the exposure, not the label. A sealed, submersible case rated by its maker for a stated depth and time is the only option for swimming, boating, snorkeling, or underwater photography. For rain, beaches, and spills, a splash-resistant pouch with a stated protection level is enough. For dust, sand, and drops away from water, a rugged non-waterproof case with a locking closure is the better buy.

One warning applies to all three: Apple advises against swimming or bathing with the iPhone, intentional submersion, saunas and steam rooms, and pressurized or high-velocity water such as showers, surfing, water skiing, and jet skiing. A case covering those activities does not change what liquid damage does to your warranty—Apple’s One-Year Limited Warranty does not cover it.

Exposure Case Type to Buy What to Verify
Rain, splashes, beach sand Splash-resistant pouch Stated protection level; sealed closure
Swimming, snorkeling, boating Submersible hard case Manufacturer depth and time rating
Underwater photography Submersible case with lens port Clear camera membrane; model-specific fit
Dust, sand, drops only Rugged non-waterproof case Locking closure; port covers; gasket
Salt water or chlorine Submersible case, sealed Rinse-and-dry care instructions
Daily use, no water Standard protective case Impact rating; full button access
Wireless charging, MagSafe Case with stated charging support Confirmed compatibility with your model

Step 3: Read the Rating Before Anything Else

An IP code or a depth-and-time spec is the only evidence of water protection worth trusting. Look for an explicit figure, not a marketing claim. An IP rating applies to the case as tested—fresh configuration, intact seals, correct closure. It does not hold after a drop, a warped gasket, aging rubber, a botched closure, or a repair. Padded, reinforced body cases with port covers and locking clasps tend to hold their seal longer than a soft sleeve.

Confirm the case supports Face ID, the touchscreen, side buttons, camera lenses, speakers, microphones, wireless charging, and MagSafe. For a shortlist already checked against those points, a roundup of the best waterproof iPhone 13 cases saves the trial and error.

Step 4: Test, Seal, and Maintain the Case

Test the empty case before the phone goes near it. Check the gasket, latch, port covers, and screen membrane for dirt, hair, cracks, or warping, then follow the manufacturer’s leak test. From there:

  • Close every latch and port cover fully; never open the case while it is wet or underwater.
  • Keep the phone dry before you open the SIM tray.
  • Rinse salt water, chlorine, and sand off per the maker’s instructions, dry completely, and inspect seals regularly.
  • Replace the case or gasket on the manufacturer’s schedule, or the moment you see damage.

A case cannot restore protection to a phone already dropped, cracked, repaired improperly, or carrying damaged seals.

If water does reach the phone, unplug cables and wipe it with a soft, lint-free cloth. Hold the Lightning connector facing down and tap the phone gently against your hand, then leave it in a dry spot with airflow for at least 5 hours before charging or connecting a Lightning accessory. Skip the heat, compressed air, cotton swabs, and rice.

One detail settles most warranty disputes: iPhones contain a Liquid Contact Indicator, normally white or silver, that turns fully red after contact with water or a water-containing liquid.

Common Questions

Can the iPhone 13 go swimming in a waterproof case?

Only if the case carries a manufacturer-stated depth and time rating for submersion. Apple advises against swimming and intentional submersion, and liquid damage sits outside the One-Year Limited Warranty. A rated submersible case is what stands between the phone and the water—the phone’s IP68 lab rating is not a substitute.

Does a waterproof case protect a phone that’s already been dropped?

No. A case cannot restore protection to a phone with cracks, prior liquid exposure, an improper repair, or damaged seals. Have the phone inspected before relying on any case for water protection, and treat a red liquid indicator as a warning sign.

What should I do if water gets inside the case?

Unplug cables and wipe the phone with a soft, lint-free cloth. Hold the Lightning connector facing down, tap it gently against your hand, and leave it in a dry area with airflow for at least 5 hours before charging or attaching a Lightning accessory. Do not use heat, compressed air, cotton swabs, or rice.

Sources

Scroll to Top