Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You want a small NAS case that holds your drives, fits your board and power supply, and sits quietly on a shelf instead of roaring from a closet. Three things decide that: how many 3.5-inch drives (the standard desktop hard drive size) it holds, which motherboard and power supply fit inside, and how loud it runs. Below are the mini-ITX enclosures (small boards measuring 6.7 × 6.7 inches) that fit real NAS builds, with bay counts and fitment limits spelled out so you can match one to your board before you order.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Each enclosure here is judged on the same four points: drive bays, board support, cooler clearance (the gap left for the CPU heatsink) and noise. The standout sits at the top of this list of small form factor nas case options because it wins on those points.
Top Picks


How To Choose The Best Small Form Factor NAS Case
A NAS case is really a shelf with a fan and a lot of tight tolerances. Get the bay count right and the board support wrong and you will be drilling holes by the weekend. These are the four numbers to check before you buy anything.
Bay count versus bay type
The headline number is how many drives fit inside. A case listing 8 bays might be eight 3.5-inch trays, or a mix of 3.5-inch HDD slots plus 2.5-inch SSD positions for your boot drive. Watch for the word “hot-swap” too — a hot-swap bay lets you pull a drive out through the front while the system keeps running, while a non-hot-swap bay means opening the panel and unscrewing. If you plan to grow the array over years, front-accessible trays save you real grief.
Motherboard, PSU and cooler clearance
Most of these enclosures take a mini-ITX board, which is a compact square measuring 6.7 × 6.7 inches. Some take a Micro-ATX board for more expansion slots. The power supply matters just as much: SFX units are the small cube-shaped blocks, Flex units are the slim rectangular ones, and 1U units are the flat server-style supplies. Then there is cooler height — a CPU cooler taller than the listed clearance simply will not fit under the lid, so measure before you commit.
Airflow, noise and drive temperature
Hard drives like steady airflow and dislike vibration. Look at the fan size and how many fans cool the drive cage directly. A larger fan moves the same air at a lower speed, which usually means less whine. A split compartment that feeds the drives their own air channel keeps drive temperatures steadier when the CPU is busy.
Side-by-Side Comparison
| Model | Best For | Internal Bays | Motherboard Fit | Cooling Fans | Amazon |
|---|---|---|---|---|---|
| JONSBO N2★ Best Overall | Compact all-aluminum first build | 6 (5 × 3.5″ HDD + 1 × 2.5″ SSD) | Mini-ITX | 1 × 12cm built-in | Amazon |
| JONSBO N3Most Drive Space | Biggest drive stack in a small box | 9 (8 × 3.5″ HDD + 1 × 2.5″ SSD) | Mini-ITX | 2 × 10cm built-in | Amazon |
| JONSBO N4 | Living-room looks with walnut trim | 8 (6 × 3.5″ HDD + 2 × 2.5″ SSD) | Mini-ITX / Micro-ATX | 1 × 120mm built-in | Amazon |
| K3 4 Bay | Tool-free hot-swap on a budget | 4 (4 × 3.5″/2.5″ trays) | Mini-ITX | 1 × 12cm rear | Amazon |
| KCMconmey 8 + 2 Bay | Maximum trays per inch of shelf | 10 (8 × 2.5″/3.5″ + 2 × 2.5″) | Mini-ITX | 2 × 8cm pre-installed | Amazon |
| AUDHEID 8 Bay | Silent dual-channel media server | 8 (8 × 3.5″/2.5″ hot-swap) | Mini-ITX / Micro-ATX | 3 × temperature-controlled | Amazon |
Detailed Reviews
1. JONSBO N2 Black NAS ITX Case, 5+1 Disk Bays
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
A brushed aluminum cube that holds five big drives and tucks into a bookshelf corner.
What makes the N2 the pick here is restraint. It measures 8.86 × 8.86 × 8.82 inches — roughly a shoebox — yet stacks five 3.5-inch hard drives plus one 2.5-inch SSD for your boot volume, six internal bays in total. The aluminum body is the part that wins people over: it looks like something you would leave out in a living room rather than hide in a basement.
Inside, a mini-ITX board drops in with a 65mm CPU cooler height limit, so pick a low-profile cooler rather than a tower. The power supply bay takes an SFX unit up to 150mm long. If you want a dedicated graphics card, it has to be a single low-profile card no longer than 197mm — fine for a media server, tight for anything heavier. Those are honest limits, not defects, and they are what keeps the footprint this small.
Cable routing is the one place owners split. The aluminum shell leaves little slack behind the drive cage, so plan your power leads before you screw the trays down. A few also find the built-in 12cm fan audible once the drives spin up. On the other side of the ledger, the compact size draws the most praise of any trait here — people keep telling the review pages they expected something bigger. Tight cable room makes the build slow, but the small footprint pays it back daily.
What makes it the top pick
- Aluminum shell with a genuinely small 8.86 × 8.86 × 8.82 inch footprint
- Five 3.5-inch drive bays plus one 2.5-inch SSD bay for a boot drive
- Takes a 12cm fan and an SFX supply up to 150mm, so parts are easy to source
- Slides onto a shelf without looking like networking equipment
Where it pushes back
- Cable room is tight behind the drive cage — route power before final assembly
- 12cm fan noise is noticed once drives warm up
- GPU is limited to a single low-profile card at 197mm or less
Reach for this if: you want five drives in a box that fits on a shelf and looks good doing it.
Think twice if: you need room for a tower cooler or a full-size graphics card.
2. JONSBO N3 Mini-ITX NAS PC Chassis, 8 HDD + 1 SSD
Nine drive bays wedged into a case barely bigger than a cereal box.
Count the slots and the gap to the rest of this list becomes obvious. The N3 holds 9 internal bays — eight 3.5-inch HDDs plus one 2.5-inch SSD — where the K3 4 Bay offers just 4. The N3’s chassis measures 9.17 × 10.31 × 11.73 inches, and that bay count is the single strongest reason to pick it.
The rest of the layout is built for a real NAS rather than a toy. A standard server-grade hot-swap backplane feeds the drive cage through dual D-type plus SATA power plugs, so you can swap a failed disk without tearing the build apart. Clearance is generous by small-form-factor standards: a 130mm CPU cooler fits, and a graphics card up to 280mm long is allowed. You get two 10cm fans mounted right in the HDD compartment, pushing air straight across the drives instead of hoping it drifts in.
Build quality is what the owner community talks about most — the aluminum-and-steel frame feels like it will outlast a couple of motherboard generations. The trade-offs are real but modest: some buyers balk at the cost relative to a bare steel chassis, and the fans are heard in a quiet room. Neither is a deal-breaker for one small box keeping eight spinning disks cool around the clock.
The bay math: eight 3.5-inch HDD positions plus one 2.5-inch SSD is the highest drive count in this lineup, and the hot-swap backplane means an upgrade is a front-panel job.
The honest catch: fitting a 130mm cooler and a 280mm GPU takes planning, and the two 10cm fans are audible at night.
Built for: anyone who wants to grow to eight big drives without buying a rack.
Less ideal for: a first-time builder on the tightest budget, since the value read is split.
3. JONSBO N4 Black NAS PC Case, Walnut Wood
A NAS chassis dressed in real walnut — the one you will not want to hide.
Most storage boxes live in a closet. The N4 has an 8mm-thick North American black walnut front panel and a 0.7 SGCC steel body, and that wood trim is the exact detail that lets it sit in a living room. Unlike the aluminum cubes, it reads as furniture first and server second.
Storage runs 8 internal bays in a split layout — six 3.5-inch HDDs (four hot-swap, two non-hot-swap) plus two 2.5-inch SSDs. It is also the most flexible board pairing here, taking both mini-ITX and Micro-ATX motherboards, with 4 PCI expansion slots. An SFX supply up to 125mm, a CPU cooler up to 70mm and a GPU up to 230mm all fit. The size jumps accordingly: 14 × 14.5 × 11.4 inches versus the cube-shaped N2 at 8.86 × 8.86 × 8.82 inches. That extra shelf space is the price of the wood and the board choice.
Two caveats worth knowing before you commit. Only four of the six big-drive bays are hot-swap, so plan which two disks you can afford to power down. And the walnut panel earns real admiration, but it is wood — treat the front with a little care. One built-in 120mm fan handles the airflow, and the front panel offers USB 3.2 Gen 2 Type-C plus USB 3.0.
Why people gravitate to it: the walnut face gives a home server a piece of furniture’s manners, and Micro-ATX support means more board options than a pure mini-ITX case.
What to weigh: two of the six 3.5-inch bays are not hot-swap, and the larger footprint demands more room.
Pick this one: when the case lives where guests can see it and you want Micro-ATX flexibility.
Look elsewhere: if every bay needs front access or shelf depth is scarce.
4. K3 4 Bay Mini ITX NAS Case, Hot Swap Trays
Four tool-free hot-swap trays for a first private cloud, built on 1mm steel.
Here is the shape of a starter NAS. Four bays, each able to take a 3.5-inch or 2.5-inch drive, and the trays pull out without a screwdriver. The chassis is 1mm-thick SGCC steel plate, stiff enough to resist the vibration four spinning drives produce.
Your board and power supply fit standard mini-ITX at 6.7 × 6.7 inches, paired with a compact Flex power supply (a slim rectangular brick often used in industrial mini-ITX cases). With the right supply the whole unit depends on 26.5 × 19 × 18 cm, small enough for a desk corner. A 12cm rear fan pulls air through a dedicated rear channel, and dense side vents feed the drive cage, so your drives stay cool. Front I/O gives you a power button and two USB 2.0 ports, so you can copy files from a flash drive without reaching around back.
The rating here is lower than the JONSBO picks, and the reason is fit rather than function — the case draws praise for being compact and solidly built, but the look divides people. Buy it if you want four hot-swap trays on a lean budget and can live with plain steel looks. If you need more than four drives later, you will be buying another case.
Why it earns a slot: tool-free hot-swap on all four trays plus 1mm SGCC steel for a stiff, vibration-damping shell.
The limit that matters: four bays is the ceiling, and two USB 2.0 front ports are slower than modern USB 3.0.
Smart match for: a beginner building a first TrueNAS or OpenMediaVault box with four drives.
Skip if: your array plan needs six or eight bays from day one.
5. KCMconmey 8 + 2 Bay DIY NAS Case
Ten drives stacked into a steel frame — the density champion of this lineup.
The KCMconmey packs more trays than anything else here: eight bays that each take a 2.5-inch or 3.5-inch drive, plus two internal 2.5-inch bays. That is 10 internal positions in a chassis that still mounts on a shelf. A hot-swap backplane runs across the front, and two 80 × 80 × 25mm fans come pre-installed. You can swap a fan without ordering a proprietary part, which is a small joy years down the line.
Board support is single-board mini-ITX at 17 × 17 cm. Power takes either a Flex supply (81.5 × 40.5 × 150mm) or a 1U supply up to 190mm long, which gives you real sourcing choice. There is one single-slot full-height PCI-e slot for a network card or a basic video card, and two USB 3.0 ports on the front for faster copies than the K3’s USB 2.0 pair. Case quality is the trait owners rate highest — the steel feels substantial with 10 drives bolted in.
Now the honest part. Clearance is the recurring friction: a full-size Intel stock cooler will not fit, and cable room is thin. Budget for a low-profile cooler and plan your cable runs before the drive stack goes in.
The draw: 10 internal drive positions plus a hot-swap backplane, with Flex or 1U power options and replaceable 80mm fans.
The real friction: 6.6 kg is heavy for a shelf case, cooler clearance is tight, and cable management needs a plan.
Right call for: builders who want the maximum number of trays and do not mind measuring their cooler first.
Not the one if: you want a light case you can move easily or need a full-size air cooler.
6. AUDHEID 8 Bay Mini ITX / Micro ATX NAS Case
Two separate air channels keep the drives cool without letting the CPU heat them.
Anyone who has watched drive temperatures creep upward knows the problem: CPU heat and drive heat share the same air and both run hotter for it. The AUDHEID splits the case into upper and lower independent air ducts so the two heat sources do not interfere, then adds three temperature-controlled fans that ramp with the load. That split-duct design is why it earns a place on this list.
All eight drive bays are hot-swap and take 3.5-inch HDDs or 2.5-inch SSDs, with dedicated power and read/write indicator lights on every bay so you can see disk activity at a glance. Board support is broader than most — mini-ITX or Micro-ATX — and it accepts 1U or Flex power supplies plus CPU coolers up to 58mm tall. The thick steel chassis is built to take a knock and protect the drives inside, and the whole thing measures 12.2 × 12 × 8.7 inches.
The cooling and noise story is honestly mixed. Under steady load the three temperature-controlled fans are the loudest part of the build, and some buyers report the case running warm when fully populated. Against rackmount NAS gear it is still a strong value, and the 58mm cooler ceiling keeps the lid low. Pair it with a proper low-profile cooler and give it breathing room on both sides.
Where it stands out: separated air channels, three temperature-controlled fans, and per-bay activity lights across all eight hot-swap bays.
What to plan around: 58mm cooler clearance and fans that climb in volume under sustained load.
Fits the bill for: a Plex or Jellyfin media server that runs constantly and needs eight swappable drives.
Consider another pick if: absolute quiet is your top priority, since the fans make themselves known.
Know the Specs
Power Supply Types: SFX, Flex and 1U
Small cases use small power supplies, and the types do not swap. An SFX supply is the compact cube-shaped unit common in mini-ITX builds. A Flex supply is a slim rectangular brick often used in industrial mini-ITX cases. A 1U supply is the flat server-style unit. Each case here names the type and maximum length it accepts: the N2 takes an SFX up to 150mm, the N4 an SFX up to 125mm, and the KCMconmey accepts a Flex or a 1U up to 190mm. Check the spec sheet first, so you don’t buy a supply that won’t fit.
CPU Cooler Clearance
Cooler height is the measurement that quietly kills builds. A small chassis lists a maximum CPU cooler height, and a heatsink taller than that number will not fit under the lid. The N2 allows 65mm, the N4 70mm, the N3 130mm, and the AUDHEID 8 Bay 58mm. Low-profile coolers are the safe pairing — measure the cooler’s stated height, not the fan’s, and leave a millimetre of room for the mounting bracket.
Common Questions
Will a Micro-ATX motherboard fit in these NAS cases?
What is a hot-swap drive bay and why does it matter for a NAS?
Can I add a graphics card to a small NAS case?
How many hard drives can I fit in a small form factor NAS case?
Do these cases include the motherboard and power supply?
How do I keep a small NAS case quiet?
What is the difference between an SFX and a Flex power supply?
Can I build a NAS in one of these cases without a dedicated RAID card?
The Bottom Line
For most buyers the winner is the JONSBO N2: a six-bay aluminum cube measuring 8.86 × 8.86 × 8.82 inches, the highest-rated case here at 4.5+ stars across 140+ ratings, and small enough to leave out in the open. If drive count comes first, the JONSBO N3 holds nine bays and still fits a 130mm cooler, so you can run a bigger CPU heatsink. The JONSBO N4 brings walnut, Micro-ATX support and a living-room finish, so it blends into a TV stand. And when you want silence around a media library, reach for the AUDHEID 8 Bay with its split air channels.
The N2 earns its title on owner experience as much as specs: a compact aluminum case that holds five drives, backed by a community that keeps buying it for exactly that.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



