What Is a Hotel Pan? Sizes, Depths, and Common Uses Explained | Steam-Table Standard

A hotel pan—also called a steam-table pan, food pan, or gastronorm pan—is a standardized rectangular foodservice container used for cooking, holding, transport, and buffet service. The US full-size footprint measures nominally 12 × 20 inches.

A pan labeled 12 × 20 inches can still fail to drop into its well. Rims, corner radius, and stacking lugs add roughly three-quarters of an inch per side, so a “full size” pan’s outside often lands near 12¾ × 20¾ inches. Knowing nominal versus actual dimensions—and a size name versus a measured depth—separates a pan that works from one that sits in the storeroom. Below: the standard US sizes, what each depth is good for, and compatibility checks before you buy.

What Sizes Do Hotel Pans Come In?

Hotel pans come in fractional sizes that divide a full-size opening evenly, letting one steam table hold different dishes side by side. Sizes below are nominal US dimensions; exact measurements vary slightly by manufacturer at the rim and corners.

Size Approximate Dimensions Common Uses
Full (1/1) 12¾ × 20¾ in (nominally 12 × 20 in) Entrées, bulk sides, roasting, catering
Two-thirds (2/3) 12 × 13⅓ in Medium-volume dishes, pasta stations
Half (1/2) 12 × 10 in Sides, salads, smaller entrées
Half-long (2/4) 6⅜ × 20⅞ in Narrow wells, elongated foods
Third (1/3) 12 × 6⅔ in Sauces, toppings, sandwich stations
Quarter (1/4) 6 × 10 in Garnishes, toppings, small sides
Sixth (1/6) 6 × 6⅔ in Condiments, dressings, prep ingredients
Ninth (1/9) 4 × 6⅔ in Small toppings, salsa, garnishes

A full-size opening holds one full pan, two halves, three thirds, four quarters, six sixths, or nine ninths. Two-thirds pans are the exception—they pair with a third-size pan to fill a full opening.

These US sizes map loosely onto the metric Gastronorm (GN) system: GN 1/1 is 530 × 325 mm, GN 1/2 is 325 × 265 mm, GN 1/3 is 325 × 176 mm, and GN 1/6 is 176 × 162 mm. The correspondence is close but not exact, so confirm which standard your equipment uses before mixing the two.

How Deep Should A Hotel Pan Be?

Common depths are roughly 2½, 4, 6, and 8 inches, each suited to a different job. The 4-inch pan is the workhorse—deep enough for vegetables, pasta, sides, and general hot holding without swallowing the volume a shallower pan would.

  • 2½ inches: baked items, lasagna, sheet cakes, and shallow cooking that needs even heat exposure.
  • 4 inches: general-purpose hot holding, vegetables, pasta, sides, and buffet service.
  • 6 inches: soups, chili, mashed potatoes, sauces, and larger batches.
  • 8 inches: bulk storage, stocks, and high-volume catering—availability may be limited by pan size and equipment clearance.

Catalogs sometimes use numeric designations: 100 for roughly 1 inch, 200 for a nominal 2-inch pan that often measures about 2½ inches, then 400, 600, and 800 for 4, 6, and 8 inches. Treat those numbers as a rough class, not a measurement—a “200” pan is not guaranteed to be exactly 2 inches deep.

Deeper pans don’t automatically hold proportionally more usable food. Published capacities conflict because some sources report brimful volume and others account for headspace and working capacity. Verify the manufacturer’s figure and whether it describes brimful or usable volume.

What Materials And Equipment Fit A Hotel Pan?

Stainless steel, aluminum, polycarbonate, and other commercial plastics are the common materials. Stainless steel is the usual pick for cooking, hot holding, durability, and easy cleaning; if you want to compare models, this roundup of tested stainless steel hotel pans covers what holds up in daily service. Polycarbonate suits cold prep and refrigerated storage but should not go in an oven or over direct heat unless the manufacturer expressly approves it.

Fit depends on more than the size name. Before buying, check the pan’s external dimensions including rim and handles, the well or cabinet dimensions, the material’s oven and heat-holding ratings, and whether lids, drain shelves, and inserts are compatible. A nominally full-size pan may not fit every piece of equipment because manufacturers differ in rim geometry, corner radius, and material thickness.

Two mistakes account for most returns: overfilling past a safe headspace, which causes spills and stops lids from closing, and putting a cold-storage plastic pan over heat. Pull damaged pans with sharp edges, warping, or cracks from service rather than patching them.

The WebstaurantStore food pan buying guide lays out the size and depth charts in one place if you need a reference while measuring your equipment.

Common Questions

Is A Hotel Pan The Same As A Steam-Table Pan?

In US foodservice the terms are interchangeable. Both describe the same standardized rectangular pan designed to drop into steam-table wells, hot-holding cabinets, chafers, and buffet equipment. “Hotel pan” comes from hotel kitchen usage; “steam-table pan” describes where it usually sits. Fit still depends on the specific equipment’s dimensions.

Can I Use A Hotel Pan In A Home Oven?

Often yes, if it is stainless steel and the pan’s outside dimensions clear the oven’s interior and racks. Measure the pan including its rim before buying, since a full-size pan is roughly 20¾ inches long and many home ovens are tighter. Polycarbonate pans should never go in an oven.

Why Doesn’t My Full-Size Pan Fit My Steam Table?

Nominal and actual dimensions differ. A pan sold as 12 × 20 inches may measure about 12¾ × 20¾ inches outside because of rims, corners, and stacking lugs. Equipment wells also vary between manufacturers. Compare the pan’s published outside dimensions against your equipment’s specification sheet rather than the size name alone.

Sources

Scroll to Top