Toro TimeMaster Blade Compatibility and Sizing Guide | Fits

A Toro TimeMaster 30-inch deck uses two matched 15.4-inch rotary blades in kit 20122P, not one wide 30-inch blade.

A 30-inch cut does not come from one 30-inch blade. The Toro TimeMaster deck measures 30 inches (76 cm) across, and it carries two separate rotary blades, each 15.4 inches long. Order one blade for a 30-inch Toro and you have bought a part that fits nothing.

Toro’s current replacement is the 15.4-inch Hi-Lift Replacement Blade Kit, part 20122P, listed as an accessory for TimeMaster 30-inch walk-behind mowers. What decides whether that kit drops onto your machine is not the deck width or the TimeMaster badge, but the model and serial number underneath it — the first thing any Toro TimeMaster blade compatibility and sizing guide has to settle.

What Blades Does A Toro TimeMaster 30-Inch Mower Take?

Two, and both are 15.4 inches. Toro’s parts documentation identifies the TimeMaster blade assembly as two rotary blades, part 116-6358-03, each seated on a blade adapter (part 120-5236) and held by a blade bolt (part 125-2466).

The 30-inch figure describes the cut; the 15.4-inch figure describes the blade. That gap is the ordering error this mower invites, and the numbers below keep it straight.

TimeMaster Spec Documented Figure What It Means For Fit
Deck cutting width 30 in (76 cm) The cut, not the blade
Individual blade length 15.4 in Roughly half the deck width
Blades per deck 2 Kit ships as a matched pair
Rotary blade part 116-6358-03 Listed twice per deck
Blade adapter part 120-5236 Two required; swap if damaged
Blade bolt part 125-2466 Two required
Hi-Lift kit part 20122P Current replacement pair
Kit price $45.14 USD Catalog price; recheck before ordering
Documented models 21199HD (serial 400000000+), 21219 Confirm against your own plate

Nothing on that list is interchangeable. A blade with a matching length and the wrong bore will hang crooked, or not seat at all.

Toro TimeMaster Blade Sizing: What Decides The Fit

Length is the least useful number on the box. A blade fits a TimeMaster only when bore, adapter seat, lift profile, thickness, mounting geometry, balance, and bolt fit all line up — and a “15-inch” or “30-inch” label confirms none of them.

Toro’s manuals specify genuine Toro replacement blades, and the parts diagrams should be matched to the exact machine rather than to the TimeMaster name alone. Toro documents several 30-inch configurations, including 21199HD from serial number 400000000 and up, plus 21219. The same 20122P kit can appear across those listings, so pull your own model and serial first; Toro’s parts page for the 20122P Hi-Lift kit is the listing to check against it.

Three shortcuts fail:

  • A generic blade sold as “30-inch” or “15-inch” says nothing about bore, adapter fit, lift, or balance.
  • Running one blade on a deck built for two throws the assembly out of balance.
  • Reusing a damaged adapter, bolt, or washer at blade change turns a routine swap into a spindle repair.

One scope limit matters: Toro’s documentation covers TimeMaster 30-inch walk-behind mowers. It does not establish fit for Recycler, Super Recycler, commercial walk-behind, riding mowers, or any non-Toro machine. If you are weighing the OEM pair against other sets, our tested Toro TimeMaster blade picks cover what actually matches.

How Do You Swap TimeMaster Blades Without Guessing?

A wrench, a block of wood, and the deck’s own hardware get the blades off — no puller needed. Toro’s manuals call for replacement after the mower strikes a solid object, or any time a blade is bent or out of balance.

  1. Stop the engine and wait for all moving parts to stop.
  2. Disconnect the spark-plug wire, following the manual’s storage and servicing precautions.
  3. Wedge a block of wood against the blade to hold it steady.
  4. Turn the blade bolt counterclockwise to release the blade assembly.
  5. Fit the correct Toro blade, adapter, washer, and bolt in the arrangement your manual shows.
  6. Tighten the blade bolt to the torque listed in the operator’s manual.
  7. Confirm both blades are oriented correctly, secure, and free to rotate without touching the deck.

Leave the plug disconnected and spin each blade by hand. Both should turn freely and stop without rubbing the deck; a drag or a metallic scrape means the adapter is not seated, so pull that bolt and redo the side.

At order time, hand Toro three things: part number, quantity, description. That is 20122P, the pair, Hi-Lift replacement blades — matched to the serial on your machine. Two 15.4-inch blades, two adapters, two bolts, one correct mower.

Common Questions

Does The 20122P Kit Fit Every TimeMaster Model?

Not automatically. Toro lists the kit for TimeMaster 30-inch walk-behind mowers, and the documentation covers configurations such as 21199HD from serial 400000000 and up, plus 21219. The same kit number can appear across those listings, but the blade diagram should still match your machine. Pull the model and serial off the mower before ordering.

Can You Replace Only One Blade?

No. The deck is built around two matched rotary blades, part 116-6358-03, and running a single blade leaves the assembly unbalanced. If one blade is bent, cracked, or badly worn, replace the pair and inspect both adapters and bolts at the same time. Mismatched blades on one deck also cut unevenly.

How Often Should TimeMaster Blades Be Replaced?

There is no fixed interval. Toro’s manuals call for a new set after the mower strikes a solid object, or any time a blade is bent, cracked, out of balance, or visibly worn. Check the blades before each mowing season and after any hit on a rock, stump, or curb. Replace rather than repair when the damage is bending or cracking, since straightening does not restore balance.

Sources

Scroll to Top