7 Best Toro TimeMaster Blades | The 15-Inch Fit Check First

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If you own a 30-inch Toro TimeMaster, you already know the sting of a dull deck: the lawn comes up ragged, clippings clump, and the mower starts working harder than you do. The fix is a matched pair of 15-inch blades built for that 30-inch deck — two short blades, not one long bar. This guide covers the replacement sets people actually keep coming back to, including the genuine Toro kit that is the crowd favorite at 4.5+ stars across 300+ ratings.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Buy replacement blades by part number and center-hole size, not by brand name. Below you’ll see exactly which deck models each set covers, how long each blade measures, and where the cut quality holds up — so you can pick the right Best Toro TimeMaster Blades for your mower.

Top Picks

Toro 20120P 30' Timemaster Blade Kit
Best OverallToro 20120P 30″ Timemaster Blade Kit4.5+★350+ ratingsThe part number your TimeMaster shipped with, in a box with Toro’s name on it. Nothing to decode here.Check price on Amazon
Gator Mulching Mower Blades Replaces 116-6358-03 120-9500-03
Budget MulcherGator Mulching Mower Blades Replaces 116-6358-03 120-9500-034.5+★50+ ratingsA mulching pair that costs less than a resharpening job and covers a long list of decks.Check price on Amazon

How To Choose The Best Toro TimeMaster Blades

The TimeMaster’s 30-inch deck is wide enough that Toro splits the cutting job between two blades instead of one. That single design choice drives everything about buying replacements: you are shopping a matched pair, each roughly 15 inches long, and both have to spin true or the deck will vibrate and stripe unevenly.

Start with the part number, not the brand name

The numbers 116-6358-03 and 120-9500-03 show up on nearly every listing here, and they are the original part numbers Toro and Exmark use for this deck. Match one of those, plus your deck model, and you are most of the way home. The aftermarket sets list their replacement numbers openly, so check your old blade against them before you order.

Check the three fit dimensions

A blade can look right and still not mount. The center hole (the round opening the spindle bolt passes through) is 5/8 inch on most of these sets, and the side hole that keys the blade into place is 5/16 inch on the sets that list one. Center-to-center spacing — the distance between those two holes — comes in at 1-1/4 inch. Get any of those wrong and the blade will not seat.

Decide if you want mulching

A mulching blade carries a curved, toothed shape that recirculates clippings and chops them finer before dropping them back on the lawn. If you bag or side-discharge, a plain high-lift edge is plenty. If you would rather not collect clippings at all, a gator-style mulching set is the one to look at.

Weigh genuine OEM against aftermarket

Genuine Toro blades remove the guesswork — they are the same part the mower shipped with. Aftermarket sets often cost less and some buyers find them equal or better. The trade-off: aftermarket edge sharpness and balance vary more from set to set, so check both before the first mow.

Side-by-Side Comparison

Model Best For Blade Type Set / Size Weight Amazon
Toro 20120P 30″ Timemaster Blade Kit★ Best Overall Genuine stock replacement Standard Toro blade 2 blades, 15″ each 1 lb Amazon
Gator Mulching Blades Replaces 116-6358-03 / 120-9500-03Budget Mulcher Budget mulching pair Gator mulching 2 blades, 15-3/8″ 3.43 lb Amazon
120-9500-03 Mulching Blades for Toro 30″ TimeMaster Fine-clipping finish Mulching 2 pack, 15-3/7″ 2.84 lb Amazon
ZGHKL 116-6358-03 Gator Mulching Blades Wide aftermarket coverage Gator mulching 2 pack, 15-3/8″ — Amazon
8TEN LawnRAZOR Blade Set Backed aftermarket set Toothed LawnRAZOR 2 pack, 15-3/8″ 2.6 lb Amazon
Toro Genuine OEM 116-6358-03 2-Pack Exact-brand loyalty Genuine OEM, high carbon steel 2 pack, 15-3/8″ 2.41 lb Amazon
Oregon 2PK Gator Mulching Blades 594-601 Deep mulch recirculation Gator mulching, 1″ airlift 2 pack, 15-3/8″ — Amazon

Detailed Reviews

★ Best Overall

1. Toro 20120P 30″ Timemaster Blade Kit

Our pick — 4.5+★ from 350+ verified ratings; the strongest balance of quality and price.

Genuine Toro part2-blade kit

The part number your TimeMaster shipped with, in a box with Toro’s name on it.

Nothing to decode here. This is the genuine Toro kit, part 20120P, and it is built for the TimeMaster 30-inch walk power mowers 20199 and 20200 only. Two blades come in the box, and each one measures 15 inches — the correct halves of that wide deck. If you want the deck to cut exactly as it did on day one, this kit is the shortest path there.

What wins people over is the blade quality itself, and it shows in how the deck behaves after a swap: the mower comes back to cutting like new rather than limping along on tired steel. Fit is the second thing that earns praise — the blades drop onto the spindle with no filing, no drilling, no improvisation. The whole kit weighs 1 pound, which makes it a light package to handle when you are already crouched under the deck with a wrench.

The catch is coverage. Toro lists this kit for 20199 and 20200 only, so if your deck carries a different model number, check your plate before ordering. It is also the plainest blade here — no gator teeth, no mulching curve — so if your goal is finer clippings rather than a factory-fresh cut, a mulching set below may suit you better.

Where it earns its keep

  • Genuine Toro part 20120P — the exact blade the mower was built around
  • Two 15-inch blades in one kit, sized for the 30-inch deck
  • Restores a factory-level cut instead of chasing vibration and ragged edges
  • Light 1-pound package that is easy to handle during the swap

Where it asks something of you

  • Listed fit stops at models 20199 and 20200 — verify your deck number first
  • Standard edge only, so clippings are not recirculated like a mulching blade

Reach for this if: you want the original Toro blade and a deck that cuts like the showroom mow.

Hold off if: your deck is a model outside 20199 and 20200, or you specifically want mulching teeth.

Budget Mulcher

2. Gator Mulching Mower Blades Replaces 116-6358-03 120-9500-03

Widest model list2-piece set

A mulching pair that costs less than a resharpening job and covers a long list of decks.

Here is the number that matters if you are swapping blades on an older TimeMaster: the deck models this set claims cover 20199, 20200, 21199 HD, 20975, 20976, 20977, 20978, 21199, 21200, 21810, 21811, 21815, 21220 and 21816. It also fits the TurfMaster line and Exmark’s 30-inch ECKA30, ECS180CKA30000 and ECX200CKC30000. Few sets spread that wide.

Each blade measures 15-3/8 inches long and 2-1/4 inches wide, with a 5/8-inch round center hole and a 5/16-inch side hole set 1-1/4 inches apart. The air lift — the raised fin that stands clippings up for a cleaner cut — sits at 25/32 inch. These are mulching blades, so the extra surfaces chop clippings down and drop them back rather than filling a bag.

Weight is where this set separates itself from the Toro kit: 3.43 pounds against 1 pound. That is a real 3.4x gap, and you feel it when you are holding a blade up to the spindle one-handed. The value story holds up in use — the blades come in cheaper than resharpening a worn pair, and the quality is close enough to original that most buyers would not flag the difference. Cutting performance is the one area where opinions split, so treat the first mow as your audition.

The value case: a two-blade mulching set that undercuts a sharpen-and-balance trip and fits more deck models than most.

The honest catch: cutting performance draws mixed feedback, and at 3.43 pounds it is heavier in hand than the 1-pound Toro kit during installation.

Best fit for: budget-minded owners of older or less common TimeMaster decks who want mulching without a premium tab.

Think twice if: you want a guaranteed factory cut from the first pass.

Fine-Cut Mulcher

3. Toro 30″ TimeMaster Mulching Blades

High-carbon steelPre-sharpened edge

Built to chop clippings small enough that you can leave the bag off.

If you want a lawn that looks swept rather than raked, the 4/5-inch air lift and mulching curve here are the reason to look. Each blade is 15-3/7 inches long, 2-1/4 inches wide and 1/7 inch thick, with a 4/5-inch air lift. That lift and the curved mulching shape work together: clippings get thrown back over the cutting edge again and again until they are fine enough to settle into the turf.

The steel is high-carbon, tempered for hardness, then painted and baked with rust inhibitors. The fit list runs long: 20120P, 20199, 20200, 20975 through 20978, 21199, 21199HD, 21200, 21491, 21491T, 21810, 21811 and the 22200-series TurfMaster decks, plus Exmark’s ECKA30 and the ECS180/ECX180/ECX200 variants.

One thing to weigh honestly: the listing leans on mulching as its whole pitch, and mulching blades ask more of the engine when grass is tall and wet. Cut on schedule rather than letting the lawn get away from you, and this set does its job. The 2.84-pound pair sits mid-pack on weight.

Why it stands out: a pre-sharpened, rust-treated high-carbon pair engineered for fine clippings and a swept finish.

Where it asks for discipline: mulching geometry loads the deck harder in tall, wet grass — stay ahead of the lawn.

Made for: the owner who would rather feed the lawn than bag it, on a 30-inch TimeMaster or TurfMaster deck.

Not the pick if: you mow tall, wet grass on an irregular schedule.

Widest Coverage

4. ZGHKL 116-6358-03 Gator Mulching Blades

Alloy structural steelDirect-install center hole

One listing that names nearly every 30-inch deck Toro and Exmark ever bolted a pair of blades to.

Compatibility is the headline. This set lists TimeMaster models 20199, 20200, 20975, 20976, 20977, 20978, 21199, 21200, 21810, 21811, 21815 and 21199HD, then keeps going through TurfMaster 22232, 22232T, 22205TE, 22207, 22215, 22210, 22200 and 22235. Exmark’s ECKA30 and the ECS180/ECX180/ECX200 decks are covered too. If a vague “fits most” listing has burned you before, that explicit model-by-model roll call is the reassurance you want.

Each blade runs 15-3/8 inches long and 2-3/4 inches wide at 0.138 inch thick, with a 5/8-inch round center hole. The steel is alloy structural grade with a surface coating, described as wear-resistant and resistant to breaking. The center hole matches the spindle, so the blades go straight on without filing or drilling — no debugging session under the deck.

What it does not spell out is weight, so judge it on the steel and the fit rather than the heft on the scale. What buyers keep coming back to is the blade quality itself, with the cutting performance right behind it. For a two-pack at the entry end of the mulching shelf, that pairing is the reason it belongs here.

What you are getting

  • Explicit fit list that covers a long run of TimeMaster and TurfMaster models
  • Exmark 30-inch decks included — ECKA30 and ECS180/ECX180/ECX200
  • Alloy structural steel with a wear-resistant surface coating
  • 5/8-inch center hole matches the spindle for direct installation

What to keep in mind

  • Weight is not published, so you cannot judge heft from the listing
  • Mulching gator geometry, same as every set of this type, loads the deck in tall grass

The right call for: anyone whose deck number sits on that long fit list and who wants gator mulching without hunting further.

Keep looking if: published weight matters to you, or you want a plain non-mulching edge.

Backed Aftermarket

5. 8TEN LawnRAZOR Blade Set for Toro TimeMaster 30″ and Exmark

810-day limited warrantyToothed edge

The aftermarket pair with the longest paper trail — a warranty measured in days, not months.

Most replacement blades ship with no warranty at all. This one ships with an 810-day limited warranty, which is the single most concrete thing on the listing page. The pair weighs 2.6 pounds, and each blade measures 15-3/8 inches long, 2-3/4 inches wide and 0.138 inch thick, with a 5/8-inch center hole.

The toothed LawnRAZOR edge is built to keep clippings in the deck longer so they get chopped finer before they land. Fit runs to TimeMaster walk-behind mowers within the serial range 312000001 to 407799999 and TurfMaster units in 313000001 to 407300000, plus Exmark’s S Series, X Series and ECKA30 decks in their own listed serial bands. Check your serial plate against those ranges — that is what the numbers are for.

Two honest notes. Sharpness draws mixed feedback, so run a file over the edge before the first mow if it feels dull. Value is debated too — for some buyers this pair is a clear upgrade over OEM, for a few it fell short. Nobody argues about the cut itself, which is where this set earns its place.

The warranty angle: an 810-day limited warranty on a 2.6-pound toothed pair is unusual in a category where most listings offer nothing.

The fair caveat: out-of-box sharpness varies, and value opinions split — inspect the edge before you mount it.

Pick it when: you want a toothed mulching set with a real warranty behind it and your deck sits inside the listed serial ranges.

Pass when: you expect a razor edge straight from the box with no touch-up.

Exact-Brand Pick

6. Toro Genuine OEM 116-6358-03 2-Pack Blades

High carbon steelGenuine OEM

The same steel Toro bolts on at the factory, in a two-pack with the part number printed on it.

Toro’s own part, high carbon steel, two blades of 15-3/8 inches each. That is the whole story, and for a lot of owners it is the only story they want to hear. The fit list covers 20199, 20200, 20976, 20978, 21199, 21200, 21810, 21811, 22200, 22210, 22215, 22225, 22235 and 20977, plus Exmark’s ECKA30 and ECS180CKA30000. The pair weighs 2.41 pounds.

What puts minds at ease here is provenance: it is the same brand as what came on the mower, and buyers who care about that notice it first. Fit is close behind — no modification, no shimming, no guessing. And it typically lands cheaper than buying a replacement through the dealer parts counter, which is its own quiet win for anyone who has priced stock blades that way.

Compared with the 8TEN set, this one trades the toothed mulching edge and the long warranty for straight OEM certainty. That is a fair trade if you bag or discharge; less so if you want clippings chopped fine enough to leave in place.

The case for paying for OEM: identical steel, identical part number, and a fit that needs zero fiddling — the safest swap on the whole list.

The trade-off: a plain high-lift blade rather than a mulching tooth pattern, so bagging and discharging suit it best.

Worth considering when: certainty tops your list and you would rather not gamble on an aftermarket edge.

Look elsewhere when: your priority is fine mulching rather than a factory-standard cut.

Deep-Mulch Pick

7. Oregon 2PK Gator Mulching Blades 594-601

1″ airliftGator mulching

A 3-inch wide gator with the tallest airlift on the list, for lawns you never bag.

The spec that stands out on this Oregon pair is the airlift at 1 inch — the raised fin that lifts grass upright into the cutting path. Pair that with the 3-inch blade width (widest here) and the mulching curve, and you have a blade that moves a lot of air and recirculates a lot of clippings. Length is 15-3/8 inches, thickness 0.134 inch, center hole 5/8 inch, outer hole 5/16 inch, center-to-center 1-1/4 inches, offset 5/16 inch.

Fit is the tightest of the group, and it is worth reading carefully. Oregon lists Exmark ECKA30 decks at serial 313,000,000 and higher, Toro TimeMaster 20199 and 20200 at 2014, and TurfMaster 22200 at 2013, all with a 30-inch deck. If your machine falls outside those years or serials, call the fit into question before ordering.

The reputation here is split in a way worth knowing up front. Overall quality draws steady praise, but edge sharpness is the recurring gripe — some sets arrive needing a pass with a file. The steel itself is fine; it is the finish on the edge that varies. Plan a few minutes with a file and this set delivers the heaviest mulching on the list.

The spec worth knowing

A 1-inch airlift and a 3-inch blade width make this the most aggressive mulching profile here. The offset of 5/16 inch and center-to-center of 1-1/4 inches match the deck’s spindle pattern.

The one to buy if: mulching is your whole goal and your deck numbers match Oregon’s tight fit list.

Skip when: you want a sharp edge from the start or your machine sits outside the listed years and serials.

Know the Specs

Blade Length, Width and Thickness

Because the TimeMaster deck is 30 inches wide, it takes two blades — each roughly 15 inches — rather than one long bar. Length matters for coverage: too short and you leave a strip uncut, too long and the blades collide. Width and thickness (0.134 to 0.138 inch on the sets here) affect how much steel is swinging and how long the edge holds up. A thicker blade (0.138 inch here) holds its edge longer but adds swing weight and spindle load; a thinner one (0.134 inch) cuts with less drag but dulls sooner.

Center Hole, Side Hole and Center-to-Center Spacing

The center hole is the round opening the spindle bolt passes through — 5/8 inch on every set here that lists it. The side hole (5/16 inch where listed) keys the blade so it cannot slip. Center-to-center spacing — 1-1/4 inch on the sets that publish it — is the gap between those two holes. Miss any of those three and the blade will not seat flat, which shows up as vibration and an uneven stripe. Check the old blade against the listing before you order.

Air Lift and Mulching Geometry

Air lift is the fin bent up along the trailing edge of the blade. It stands grass upright so the edge slices cleanly rather than tearing. Higher lift (1 inch on the Oregon set, 25/32 inch on the Gator set) moves more air and throws clippings harder. Mulching blades add a curved, toothed shape that recirculates clippings until they are fine enough to settle back into the lawn. That cuts down on bagging, but it also loads the engine harder in tall, wet grass.

OEM Part Numbers and Serial Ranges

The numbers 116-6358-03 and 120-9500-03 are Toro and Exmark’s original part numbers for this 30-inch deck, so most replacement listings reference them. Many also list serial-number ranges — for example, the 8TEN set covers TimeMaster units from 312000001 to 407799999. Those ranges exist because Toro changed deck hardware across production runs. Match the part number and the serial plate, and you avoid a return trip.

Common Questions

Will these blades fit my Toro TimeMaster 30-inch mower?
Check your deck model number against each listing’s fit list. The genuine Toro kit covers models 20199 and 20200 only. The aftermarket sets list many more models — the ZGHKL set alone lists 20199, 20200, 20975, 20976, 20977, 20978, 21199, 21200, 21810, 21811 and 21815. If your deck number is on the list and the center hole is 5/8 inch, you are in good shape.
Why does my TimeMaster take two blades instead of one?
The TimeMaster deck is 30 inches wide, and Toro splits that cutting width into two blades of roughly 15 inches each. One blade that long would flex and vibrate. Two shorter blades balance better and follow the deck’s shape. This is why every set on this list ships as a matched pair, and why you should replace both at once — a new blade paired with a worn one will cut unevenly.
What is the difference between a standard blade and a mulching blade?
A standard blade has a single cutting edge and a lift fin. A mulching blade adds a curved, toothed shape that recirculates clippings inside the deck until they are chopped fine enough to drop back onto the lawn. Mulching saves you from bagging, but it also requires more engine power when grass is tall or wet. The Toro OEM and 20120P sets are standard; the Gator, Oregon and LawnRAZOR sets are mulching.
Can I use these blades on an Exmark 30-inch mower?
Several sets here cover Exmark as well as Toro. The Gator set lists Exmark ECS180CKA30000, ECX200CKC30000, ECX180CKA30000 and ECKA30. The 8TEN set lists S Series, X Series and ECKA30 with specific serial ranges. The Oregon set lists ECKA30 from serial 313,000,000 and higher. If you have an Exmark, check the serial plate as well as the model number.
How often should I replace my TimeMaster blades?
A blade dulls with use, so inspect it every few mows and replace when it tears grass rather than slicing it, or when you feel vibration. Mulching blades carry more cutting surface and often wear faster than standard ones. If your lawn comes up with brown, frayed tips, the edge is the first thing to check. Sharpening can extend life, but a badly nicked or bent blade should be swapped out.
Which blade is sharpest from the start?
Sharpness varies by set. The pre-sharpened high-carbon 120-9500-03 mulching set advertises an edge cut at the optimum angle from the first mow. The 8TEN and Oregon sets get mixed feedback on out-of-box sharpness — some arrive sharp, others need a pass with a file. Budget a couple of minutes with a file before the first mow on any aftermarket set.
Will heavier blades hurt my mower?
Weight matters for vibration and spindle load. The genuine Toro 20120P kit weighs 1 pound for the pair — the lightest here. The Gator set weighs 3.43 pounds, a real 3.4x more, and you feel it when handling. In practice, most decks handle either weight fine, but a blade that is heavier than the original may change the feel. Balance matters more than raw weight — an unbalanced blade will vibrate regardless of heft.
Do I need to balance new blades before installing?
Check the balance every time you install. Aftermarket blades are supposed to arrive balanced, but quality control varies. A blade that is off-balance will vibrate and can damage the spindle over time. The quick test: hang the blade on a nail through its center hole and see if it tips. If one side drops, it needs balancing before you mount it. Quality blade sets like 8TEN and Toro should arrive true.
Can I mix a mulching blade with a standard blade on the same deck?
Do not mix blade types on the same deck. The two blades on a TimeMaster work together — they share the cutting path and balance each other. Mixing a mulching blade with a standard blade creates uneven airflow, uneven cut quality and vibration. Always order a matched pair, and always replace both at the same time, even if only one is dull.
Are aftermarket blades as good as genuine Toro blades?
It depends on the set. Some aftermarket versions — like the 8TEN and ZGHKL — draw praise for blade quality and even get called better than OEM. Others get mixed feedback on sharpness and value. Genuine Toro blades (the 20120P and 116-6358-03 sets) remove all guesswork: same steel, same fit, no fiddling. If certainty matters, pay for OEM. If you want mulching and are willing to inspect the edge, aftermarket sets deliver good value.

The Bottom Line

For most TimeMaster owners, the toro timemaster blades answer is the Toro 20120P 30″ Timemaster Blade Kit — a genuine part number with two 15-inch blades, so your deck cuts like new with zero guesswork. Want mulching and a wider fit list? The Gator Mulching set covers far more deck models and costs less than a resharpening. And if a toothed edge with a real warranty matters to you, grab the 8TEN LawnRAZOR set. One honest nudge: the Toro kit is the highest-rated pick here at 4.5+ stars, but the budget Gator set has more buyers behind it — so if quality is your priority, order the Toro first.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top