Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A 98-inch TV is a two-person, hundred-plus-pound object, so the mount under it has one job: never let go. The short answer is that you buy on VESA pattern and load rating first, stud spacing second, and articulation range last — everything else is comfort. One note before you read on: this list uses flexible, human-like matching, so not every pick is the exact number you typed into the search bar. The nearest same-type size serves the same purpose, and each pick below is rated for a 98-inch-class screen.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
What follows is nine mounts sorted by what they actually solve, from arm reach to stud count to the profile your wall can live with. Read it as a shortlist of the tv mount for 98 inch screens that will not wobble when the room goes quiet.
Top Picks



How To Choose The Best TV Mount for 98 Inch Screens
Three measurements eliminate most of the risk before you buy. Measure the four holes on the back of your TV in millimeters, horizontally then vertically — that pair is your VESA pattern. Then measure the gap between your wall studs, usually 16 or 24 inches on center. Finally, weigh your TV and add a healthy margin on top of it.
Start with the VESA hole pattern, not the screen size
A mount rated for a 98-inch TV still won’t bolt on if its plate can’t span your hole spacing. The picks here run from 200x200mm plates up to 900x600mm, so check your own numbers against the spec line before anything else. A slotted rail design covers odd sizes that fixed-hole plates miss.
Then check what your wall can carry
Every mount here needs real structure — wood studs, solid concrete, or brick. Drywall alone is not on the table for a screen this size, and several of these makers say so plainly in their own instructions. If your studs sit off-center from where the TV should go, horizontal offset or a sliding wall plate rescues the placement.
Finally decide how much motion you will actually use
A fixed, low-profile mount keeps a big screen tight to the wall and out of the way. A full-motion arm lets you swing the picture toward the kitchen or a second sofa, and every extra inch of reach puts more leverage on the wall. Match the extension to your room, not to the spec sheet’s biggest number.
Side-by-Side Comparison
| Model | Best For | Load Rating | Max VESA | Extension | Amazon |
|---|---|---|---|---|---|
| Perlegear Full Motion 42–100″★ Best Overall | All-round large-screen pick | 200 lbs | 800 x 600mm | 22 in | Amazon |
| FORGING MOUNT Heavy Duty XXL 55–120″Longest Reach | Corner placement and long reach | 275 lbs | 900 x 600mm | 43 in | Amazon |
| VIVO 2-Stud MOUNT-VW120MTwo-Stud Hero | Two-stud walls, biggest screens | 264 lbs | 900 x 600mm | 27.7 in | Amazon |
| MOUNTUP Heavy Duty 50–110″ | Slim look with full motion | 250 lbs | 800 x 600mm | 19.9 in | Amazon |
| monTEK HW1277BK | Tool-free tilt on huge screens | 265 lbs | 900 x 600mm | 27.7 in | Amazon |
| Mount-It! MI-14010 | Odd VESA sizes and DIY installs | 264 lbs | 900 x 600mm | 27.7 in | Amazon |
| Sanus VXT7-B2 | Fixed tilt on 140-inch walls | — | — | Tilt only | Amazon |
| Mount-It! The Beast MI-394 | Maximum steel for the heaviest TV | 275 lbs | 800 x 600mm | 39 in | Amazon |
| Kanto PMX800 | Off-center studs, premium build | 200 lbs | — | 31.3 in | Amazon |
Detailed Reviews
1. Perlegear Full Motion TV Wall Mount
Our pick — 4.5+★ from 9,000+ verified ratings; the strongest balance of quality and price.
The crowd favorite of the whole list, with a reach long enough and a plate broad enough for a 98-inch panel.
Start with the plate: this one covers VESA patterns from 200 x 200mm all the way to 800 x 600mm — those are the four bolt-hole measurements on the back of your TV, in millimeters. That range is what lets a 42-inch set and a 98-inch set share the same bracket. The steel is forged 20% thicker than the builder’s standard, with a solid axle and a reinforced wall plate, and every unit is tested at 4X its rated load plus 6,000 cycles. In plain terms, your screen stays put when you swing it out to arm’s length.
You get three numbers that matter for a 98-inch set: up to 200 lbs of holding, 22 inches of extension out from the wall when you want a closer view, and a retract to just 3 inches when you want the room back. The swivel runs ±65°, which beats the MOUNTUP’s ±45° and the VIVO’s 120° — enough to turn a wall-mounted giant toward an open kitchen without moving a chair. Tilt is +5°/-15°, and the one caveat here is that it falls well short of the MOUNTUP’s +15°/-15° range, so a screen mounted high above eye level won’t angle down quite as far.
Setup is where this one earns its keep. The bracket arrives pre-assembled, the box includes a drilling template, a bubble level, and a full hardware kit, and the mount fits 16-inch or 24-inch wood studs plus concrete and brick. Cable straps are in the box too, which matters when a screen this size has three or four cables hanging behind it. It averages 4.5+ stars across one of the largest review bases in this class.
Where it earns the top spot
- Holds up to 200 lbs and spans VESA 200x200mm to 800x600mm, so it fits large-format panels
- 22 inches of extension with ±65° swivel — more swing than the MOUNTUP and VIVO picks
- Folds to a 3-inch profile, keeping a 98-inch screen tight to the wall
- Pre-assembled bracket, drilling template, bubble level, and cable straps all included
What to weigh before you buy
- Tilt of +5°/-15° is narrower than the MOUNTUP’s +15°/-15°, so high mounting angles less freely
- Needs wood studs, concrete, or brick — drywall alone won’t hold it
Go with this if: you want one mount that handles a 98-inch screen, swings wide, and comes with the tools to install it.
Look elsewhere if: your wall studs don’t line up and you need horizontal offset to fix the placement.
2. FORGING MOUNT XXL Full Motion Mount
Forty-three inches of steel arm — the longest reach here by a wide margin, built for the corner nobody else can serve.
If your 98-inch TV has to live in a corner or serve two rooms at once, reach is the spec that decides everything. This mount extends a full 43 inches from the wall, more than double the MOUNTUP’s 19.9 inches, and that extra distance is what lets the screen clear a side wall or angle back toward a dining table. The other extreme matters just as much: it retracts to 2.8 inches when you push it home, so the long arm disappears rather than dominating the room.
Movement is broad. Swivel tops out at 180°, a full half-turn past the VIVO’s 120°, and the tilt runs 12° down or 5° up with a ±3° level adjustment after the TV is hanging. Six swivel-and-tilt arms share the load, which is the design choice that stops a big panel from drooping at full extension. The load rating is 275 lbs on a 900 x 600mm max VESA plate, and the box covers 12-, 16-, and 24-inch wood studs plus concrete and brick.
The honest part: the weight rating draws mixed reactions. Some buyers report it handles closer to 220 lbs than the advertised 275 lbs — still above most 98-inch panels, but check your TV’s weight against that lower figure. What consistently wins people over is the build itself — mount quality and sturdiness are the two things owners talk about most, by a clear margin. Assembly is quick with the pre-set template, and the maker quotes under 30 minutes for the install.
The corner solution: 43 inches of extension is the single best answer on this list for a corner placement or a room with a walkway behind the couch.
Check your TV’s weight twice: the rated 275 lbs is the headline, but treat the lower figure owners mention as your working margin.
Reach for this if: the TV has to swing out past a side wall or into a second seating zone.
Think twice if: your panel is near the top of the weight range and you want the full advertised margin.
3. VIVO 2-Stud TV Wall Mount
Holds 264 lbs on just two studs — the pick for a wall where you can’t reach a third.
A 98-inch panel usually pushes people toward three studs, and sometimes the wall simply doesn’t offer them. This mount carries 264 lbs on two wood studs, with a large single mounting plate doing the work instead of a wide span of arms. The plate itself is the story: 73 owners name build quality as what they’re happiest with, and 57 more cite sturdiness. That is a mount drawing praise for how it is made, not for a feature list.
Screen compatibility reaches the top of this group at 120 inches, with VESA support from 200 x 200mm up to 900 x 600mm. The arm folds to a compact 3-inch profile, close to the MOUNTUP’s 1.65 inches but far tighter than the long-arm FORGING MOUNT, and extends 27.7 inches for a custom view. Tilt is +5° to -15°, swivel is 120°, and there’s ±5° of screen leveling to fix a horizon that drifts once the weight is on. Integrated cable management keeps the cords protected while you swing the screen.
Customers note it holding a 98-inch TCL S5 on a basement wall, which is exactly the job this mount is sold for. Two details to plan around: the unit weighs 38.3 lbs on its own, and the maker recommends a two-person install because of it. The mount also arrives mostly assembled, so the work is mainly a VESA bracket attachment before it goes on the wall.
Built for two studs: 264 lbs of support from a single broad plate, plus 120° swivel and a 27.7-inch extension, in one bracket.
Bring a helper: 38.3 lbs of mount plus a 98-inch screen is not a solo lift, and the maker says so.
It’s the right call for: walls with only two usable studs, and rooms aiming as large as 120 inches.
One thing to know: the mount alone is heavy enough that you’ll want a second set of hands on install day.
4. MOUNTUP TV Wall Mount Holds 250 lbs for 50-110 Inch TVs
Only 1.65 inches off the wall — the flattest full-motion mount here, and the one that tilts the furthest.
Most full-motion arms leave a visible gap behind a big screen. This one retracts to 1.65 inches, well inside the VIVO’s 3 inches and the monTEK’s 2.95 inches, so a 98-inch panel reads as though it were painted on the wall. Then it pulls out to 19.9 inches when you want the picture closer than the sofa line. Six reinforced alloy-steel arms carry the load across that span, rated to 250 lbs on VESA from 200 x 100mm to 800 x 600mm.
The tilt range is the widest in this lineup at +15°/-15°, beating the MOUNTUP’s own neighbors on the sheer downward angle — and that’s a real advantage when the screen sits above a fireplace or a tall console. Swivel runs ±45°, the narrowest swing among the full-motion picks here, so treat this as a room-facer rather than a full swivel arm. Stud spacing is the most flexible of the group at 12, 16, 18, and 24 inches, so it can land on two or even three studs.
Owners describe it as well-built with smooth movement in all directions, and it holds heavy screens without complaint — one buyer reports it handling an 85-inch model and another a 125-lb TV with no issues. The pre-assembled bracket, labeled hardware, bubble level, and cable ties come in the box. Drywall mounting is out, and concrete anchors take a request to the maker.
The flush fit: 1.65 inches retracted is the tightest wall gap on this list, and the +15°/-15° tilt is the broadest.
Narrow swing: ±45° of swivel is enough to face a room, not enough to walk the screen around a corner.
Worth it when: looks matter as much as motion, and the TV will sit high enough to need a steep tilt.
Pass if: you plan to swing the screen toward a second room — the ±45° swivel won’t get you there.
5. monTEK Heavy Duty Full Motion TV Wall Mount
Snap the TV on and off in seconds — the quick-release hook is the detail that changes install day.
Getting a 98-inch screen onto a wall bracket is the worst part of the job, and this mount solves it with a quick lock-and-release system that snaps the panel on or off without a struggle. The rest of the hardware keeps pace: 265 lbs of capacity, 4X load-bearing test certification, and a reinforced dual-arm structure that’s built to stop sagging even with a 100-inch-plus screen fully extended. Screen support runs from 60 to 120 inches with VESA 200 x 200mm up to 900 x 600mm.
Motion is where it stands apart from the MOUNTUP’s tighter swing. You get 27.7 inches of extension, ±60° of swivel, and a tool-free tilt from +5° to -15° that adjusts by hand without knobs. The tool-free part sounds minor until you’re behind a mounted giant trying to kill glare with a screwdriver in your teeth. Fully retracted it sits 2.95 inches from the wall, comparable to the VIVO’s 3 inches. Stud coverage takes 12-, 16-, 18-, and 24-inch wood studs, plus concrete and brick.
Owners call it sturdy and dependable, with one describing it as built like a tank, and the sturdiness-and-quality pairing is the most-discussed trait by a distance. The trade-off is the mount’s own heft — 34.6 lbs of steel, which several buyers find heavy to handle, and the maker recommends a two-person lift for that reason. Lifetime support is included if you hit a snag.
Why it stands out
- Quick lock-and-release lets you hang or remove a big screen in seconds
- Tool-free tilt from +5° to -15° adjusts glare without any hardware
- 265 lbs capacity with 4X load testing across 60-120 inch screens
- 27.7-inch extension and ±60° swivel cover a wide seating arc
Before you commit
- At 34.6 lbs the mount itself is heavy to position on the wall
- Two-person install is recommended by the maker, so plan the help
The best fit: anyone who dreads lifting a giant panel onto a bracket — the quick-release hook does the heavy thinking.
The catch: 34.6 lbs of mount means you should line up a helper before install day.
6. Mount-It! 100 Inch TV Wall Mount
Slotted rails that catch odd hole patterns other plates skip — the fit-first mount for tricky panel backs.
Not every big TV has a textbook hole pattern, and that’s precisely the problem this mount was built around. The rails are slotted, so they cover VESA continuously from 200 x 200mm to 900 x 600mm, including awkward sizes like 600 x 500 that a fixed-hole plate misses entirely. Measure the four holes center to center on your TV’s back, in millimeters horizontal then vertical, and this bracket will meet nearly any number you find.
Capacity is 264 lbs across 60 to 120 inch displays, tested at 4X the rated load before each unit ships — a number that sits behind the claim rather than beside it. Dual articulating arms run from 3 inches at the wall out to 27.7 inches, with 120° of swivel and a +5° to -15° tilt. There’s also ±5° of screen leveling so you can correct the horizon after the weight is on, plus a tilt tension you set snug enough to hold and loose enough to move by hand.
Owners prize the mount’s quality above everything, and sturdiness follows right behind — the two most-discussed traits on a screen this size. It comes with all mounting hardware, a template, a bubble level, and an illustrated English guide, and the maker notes it’s straightforward for a first-time DIY installer. Stud spacing covers 16, 18, and 24 inches; metal studs and drywall-only walls are out. A lifetime manufacturer warranty backs it.
Fit beats everything: continuous slotted rails handle odd VESA patterns, which is the difference between mounting and returning.
Plan for two: 18.6 lbs of steel and a 98-inch panel still want a second person for the lift.
Choose this if: you’ve measured your TV’s holes and the numbers don’t land on a clean round pattern.
Not for you if: your wall is metal-stud or drywall-only — this one won’t anchor there.
7. Sanus 65-140″ Tilt Wall Mount (VXT7-B2)
A fixed tilt bracket rated to 140 inches — for the screen too big to swing, and the wall too small to spare room.
This one is a different animal from everything else here: it tilts and does not swivel. That’s the point. A fixed bracket puts far less leverage on your wall than an articulating arm, so it suits the very largest panels — the range runs from 65 inches up to 140 inches, with a 10° tilt for glare. If your 98-inch set is going to hang and stay put, you don’t need 43 inches of arm; you need a mount that never moves.
Reviewers point out it holding a 100-inch Hisense with ease and fitting TCL 98-inch units well, which is the real-world confirmation a fixed bracket needs. The praise centers on the mount’s overall quality, with sturdiness next — the same quality-first pattern the VIVO and Mount-It! picks score on. Several owners note the extra headroom in the weight limit as a comfort, which is the right way to think about a bracket that won’t be adjusted.
The trade-off is motion: no swivel, no extension, no reaching around a corner. You also get a narrower tilt range at 10° than the +15°/-15° you’d see on a full-motion arm. For a dedicated theater wall where the seats never move, that’s not a loss — it’s the clean, low-drama mount a 98-inch panel deserves.
Built to stay put: a tilt-only bracket rated across 65 to 140 inches, so a heavy panel rests on far less leverage.
No swing, by design: 10° of tilt and nothing else means the screen faces one direction for good.
Pick it for: a fixed theater or living-room wall where the TV will never need to angle sideways.
Skip it for: any room where the screen has to swing toward a second seating area.
8. Mount-It! The Beast Heavy Duty TV Wall Mount, 60-110″
Fifty-five pounds of coated steel and a 275-lb rating — the mount for a panel you’d rather overbuild than underbuild.
The name is earned: 43.7 lbs of reinforced coated steel before a TV ever touches it. This mount is built from reinforced coated steel with stainless steel hardware and abrasion-resistant copper gaskets, and it tips the scales at 43.7 lbs before a TV ever touches it. Capacity is 275 lbs across 60 to 110 inch screens with VESA 100 x 100mm up to 800 x 600mm, covering Samsung, LG, Sony, TCL, and Hisense. Every unit is load tested to hold four times its rated capacity, and lock clips are included so the panel stays exactly where you put it.
Extension runs 27.7 inches, matching the VIVO and Mount-It! MI-14010. Tilt is 10°, and a sliding wall plate centers the screen even when your studs are off-center — the fix you want when a wall bracket has to be honest about stud placement. Integrated cable management hides the wires behind the mount for a floating-screen look, and stud spacing covers 16 and 24 inches.
Owners describe it as a buy-once mount. Mount quality and sturdiness are the traits they talk about most, followed closely by adjustability — the ability to swing the panel around or push it flush without any flex. It’s worth flagging that compatibility draws mixed reactions in the reviews, so measure your VESA pattern and studs before ordering rather than assuming. The maker recommends two people for the install, and the instructions are described as clear.
Overbuilt on purpose: 43.7 lbs of steel, 275 lbs of capacity, and 4X load testing — a bracket that will outlast the TV.
Measure first: compatibility gets mixed reviews, so confirm your VESA pattern and stud spacing before you click buy.
Made for: the buyer who wants the heaviest, most reinforced bracket and doesn’t mind a heftier install.
Double-check first: your specific VESA pattern and stud layout, since fit opinions vary.
9. Kanto PMX800 Pro Series Full Motion Mount for 55″ – 120″ TVs
Twenty-two inches of horizontal offset — the rescue mount when your studs land nowhere near where the TV belongs.
Studs are rarely centered on the wall you want the TV on, and that’s exactly the gap this mount fills. Horizontal offset totals 22 inches, letting you slide the screen left or right of the studs until the placement looks right, and oversized brackets add height flexibility. Capacity is 200 lbs for displays up to 120 inches, covering both TVs and interactive touch panels. For a centered 98-inch install on an awkward wall, that offset is worth more than any arm on this list.
A toolless cam-lever tilt handles glare adjustments on the fly with 12° of movement, and the whole thing articulates for generous swivel even with a very large screen. Cable management and the lag-bolt covers are made of metal rather than plastic, built to survive regular use.
Owners rate the Kanto for quality first and installation second, describing it as a well-engineered articulating mount that comes with everything needed to hang it. Smooth movement and adjustability round out what buyers value. The caveat is the 200-lb rating, which is the lowest ceiling in this group — fine for most 98-inch panels, but check your TV’s weight against it rather than assuming.
The placement fix: 22 inches of horizontal offset means off-center studs no longer dictate where the screen goes.
Lowest capacity here: 200 lbs covers most large panels, but it’s not the margin the Mount-It! Beast or FORGING MOUNT offer.
It’s for you if: your studs are hopelessly off-center and the TV’s position matters more than the mount’s weight ceiling.
The honest limit: 200 lbs is the lightest rating in this lineup, so confirm your panel’s weight first.
Know the Specs
VESA Pattern (the bolt-hole grid)
VESA is simply the rectangular spacing of the four holes on the back of your TV, measured in millimeters as width by height. A mount listed at 800 x 600mm will accept hole grids up to that size, and a plate rated from 200 x 200mm up covers smaller sets too. Measure your own holes before buying — if the pattern sits outside the mount’s range, it won’t bolt on no matter how high the weight rating.
Load Rating (how much it holds)
The load rating is the maximum TV weight the mount is built to carry, in pounds. A 98-inch panel is a heavy object, so you want real headroom above your TV’s own weight rather than a number that just barely clears it. Several mounts here also publish a multiple-of-rating load test, which tells you the bracket was pushed past its limit before shipping.
Extension (how far it reaches out)
Extension is the distance the arms travel from the wall to the back of the TV. More reach means more viewing flexibility, but also more leverage pulling on your studs, which is why a long arm needs serious steel. Look for the retracted figure too — that’s the sleeping profile that decides whether the mount looks tidy when the TV is pushed home.
Stud Spacing (what your wall offers)
Most walls use studs set 16 or 24 inches apart, and a few mounts here also cover 12 or 18 inches. A mount that fits only 16-inch studs won’t work on a 24-inch wall, so measure the gap center to center. None of these work on drywall alone — every pick requires wood studs, solid concrete, or brick.
Common Questions
Will a mount rated for 100 inches actually hold a 98-inch TV?
How do I find my TV’s VESA pattern without the manual?
Can I mount a 98-inch TV on drywall alone?
Is a full-motion mount safe for a screen this large?
How much swivel do I need to clear a side wall?
Do I need one person or two to install a 98-inch mount?
What is the difference between a tilt mount and a full-motion mount?
Will a low-profile mount still let me reach the cables?
Can I slide the TV sideways after it is mounted?
The Bottom Line
For a 98-inch panel that needs one mount to do everything, the Perlegear Full Motion is the pick — 200 lbs of capacity, ±65° of swivel, a 22-inch extension, and every installation tool in the box. If the TV has to swing into a corner, the FORGING MOUNT XXL reaches 43 inches where nothing else here comes close. And when the studs sit off-center and placement matters most, the Kanto PMX800 gives you 22 inches of horizontal offset to put the screen exactly where it belongs.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





