7 Best Trane New Ignitor Limit Switch | Heat That Stays Lit

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Your furnace clicks, blows cold air, and shuts off before the house warms up. The cause is usually one of two small parts: the igniter that lights the gas, or the limit switch that shuts the burner down when things get too hot. This guide separates the two and shows you which Trane part matches which symptom, so you stop buying parts by guesswork. The top pick is the Trane IGN00145, a genuine OEM (original equipment manufacturer) igniter kit that arrives complete with the bracket and screws. It carries 4.5+ stars across 240+ ratings.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Most homeowners only learn the difference between an igniter and a limit switch after a cold night on the floor with a flashlight. The picks below cover both halves of that problem, and every one is a Trane-compatible part rather than a universal fitment gamble. Here is how to match the right component to your furnace’s actual fault code with confidence.

Top Picks

Trane IGN00145 Genuine OEM Burner Igniter for Furnaces
Best OverallTrane IGN00145 Genuine OEM Burner Igniter for Furnaces4.5+★200+ ratingsThe complete OEM kit that ends the “does it come with the bracket?” question before you order. Buy this one if you want to open one box and have everything the job needs.Check price on Amazon
USA Nitride Furnace Ignitor Replaces Trane - American Standard
Long-Life UpgradeUSA Nitride Furnace Ignitor4.5+★60+ ratingsA silicon nitride element that swaps in for IGN00152 or IGN00146 without an adapter kit. Pick this one if you have already replaced an igniter once and want a longer-lived element in the slot.Check price on Amazon

How To Choose The Best Trane New Ignitor Limit Switch

The single biggest mistake in this category is buying an igniter for a limit switch fault, or the reverse. An igniter that will not glow means no flame ever starts, so you hear the inducer fan run and then nothing. A limit switch that trips early means the flame lights fine and then cuts out a few minutes in. Read your control board’s blink code first, then match the part number printed on the old component.

Confirm the part number, not just the brand

Trane uses several igniter families across model years, and the numbers are not interchangeable. An IGN00145 kit, an IGN00054, and a 750-101 silicon nitride unit all bolt up differently and are specified for different furnaces. Look for the sticker or stamped number on the part you are removing. Then compare it to the replacement’s listed part number before you order anything.

Match the voltage exactly on an igniter

A hot surface igniter (a ceramic element that glows red to light the gas) is voltage-specific. The USA Nitride unit runs at 120 volts and its maker explicitly states it is not for use on 80-volt systems. Put the wrong voltage in and the element either runs cold or burns out fast. This is the number to check twice.

Read the limit switch temperature pair

A limit switch is a heat-triggered safety shutoff — a small disc that opens the circuit at a set temperature and closes it again once the plenum cools. The SWT01635 opens at 180°F and closes at 150°F. A unit that opens too low will nuisance-trip; one that opens too high will not protect the heat exchanger. Match the rating to the original.

Check the insertion depth and probe style

These switches mount through the furnace cabinet with the sensing probe sitting in the airflow. Several picks here use a 3-inch insertion, while the smaller SWT01635 is built on a much more compact body. If the probe does not reach the airstream, the switch reads the wrong temperature and cuts the burner at the wrong time. Confirm your old part’s probe length before ordering.

Side-by-Side Comparison

Model Best For Part Type Key Rating Weight Amazon
Trane IGN00145★ Best Overall Complete igniter kit with bracket Hot Surface Igniter Kit Genuine OEM 2.89 oz Amazon
USA Nitride 750-101Long-Life Upgrade Long-life nitride upgrade Silicon Nitride Igniter 120 V 2.89 oz Amazon
Trane IGN00054 Straight OEM igniter swap OEM Igniter OEM Part IGN00054 2.39 oz Amazon
C340056P02 3-inch limit switch replacement Limit Switch 3″ Insertion 3 oz Amazon
C340056P18 L155-30 Trane furnace limit switch Limit Switch 3″ Insertion 3 oz Amazon
C340056P04 Budget limit switch option Limit Switch 3 A — Amazon
SWT01635 / SWT-1635 American Standard and Trane thermal limit Thermal Limit Switch 180°F open / 150°F close — Amazon

Detailed Reviews

★ Best Overall

1. Trane IGN00145 Genuine OEM Burner Igniter for Furnaces

Our pick — 4.5+★ from 200+ verified ratings; the strongest balance of quality and price.

Genuine OEMIgniter, Bracket and 3 Screws Included

The complete OEM kit that ends the “does it come with the bracket?” question before you order.

Buy this one if you want to open one box and have everything the job needs. The IGN00145 kit ships with the igniter, its mounting bracket, and three screws, so you are not hunting through parts drawers for a bracket that fits a 1 x 1 x 1 inch footprint. It is a genuine OEM part — Original Equipment Manufacturer, meaning it is built to Trane’s own specification rather than reverse-engineered — and it weighs 2.89 ounces.

Owners praise it for lighting the burner on the first call for heat. The reliability of the ignition is the thing that gets praised most in the feedback, with quality and value close behind it. The manufacturer describes it as the Hot Surface Ignitor Kit, which is the glowing ceramic element that lights the gas burner.

The catch worth knowing before you commit: durability is the one recurring theme that cuts against the otherwise strong record. A minority of these units give out after a couple of months rather than the multi-season life you would hope for, and heat output experiences are mixed. That is not the whole story, but it is the honest trade-off. Check that your furnace actually calls for the IGN00145 number before ordering — this kit fits specific models, not every Trane built.

Why This Kit Wins

  • Bracket and three screws included, so no separate hardware run
  • Genuine OEM construction built to Trane specification
  • Reliability is the single most-praised quality in owner feedback
  • At 2.89 ounces it is lighter than the heavier 3-ounce limit switches here

Where It Falls Short

  • Durability is the weak spot — some units fail within a couple of months
  • Fits only the furnaces that specify the IGN00145 part number
  • No installation instructions beyond the components themselves

Go with this if: you want the one-box OEM fix and your furnace sticker reads IGN00145.

Hold off if: your board calls for a different igniter number — a voltage or bracket mismatch here costs you a second order.

Long-Life Upgrade

2. USA Nitride Furnace Ignitor

Silicon Nitride120 Volt

A silicon nitride element that swaps in for IGN00152 or IGN00146 without an adapter kit.

Pick this one if you have already replaced an igniter once and want a longer-lived element in the slot. This one is built from silicon nitride — a ceramic material the maker says holds up to heat better than traditional igniters — rather than the older ceramic style. It is a direct replacement for the Trane and American Standard IGN00152 and IGN00146 part numbers, and it arrives with the correct mounting bracket and termination plug already in the package.

The 120-volt rating is the number that matters most, and it comes with a hard warning: this unit is not for use on 80-volt systems. Before you buy, check what your control board feeds the igniter. Performance is what owners call out, with the fit as a direct replacement right behind it. Assembly happens in the USA, and the package weighs the same 2.89 ounces as the IGN00145 above.

One thing to plan around: the box dimensions run 6.18 x 3.11 x 3.03 inches, which is most of the package being padding for a small, fragile ceramic part. Handle it by the base when you install, because these elements crack if you grip the ceramic itself. Order the part number first, then treat the install as a gentle two-hand job.

Material advantage: silicon nitride is the upgrade path when you want the element to survive more heating cycles than a standard igniter.

Voltage warning: a 120-volt part on an 80-volt circuit will not behave — verify the feed before ordering.

Reach for this if: your old part reads IGN00152 or IGN00146 and you want a more heat-tolerant material in the slot.

Look elsewhere if: your furnace runs an 80-volt ignition circuit — this one is explicitly not for it.

OEM Swap

3. Trane IGN00054 Igniter

O.E.M. AuthorizedTrane Part Number IGN00054

The bare-bones OEM element for a furnace that calls for IGN00054 and nothing else.

Some jobs do not need a kit. If the bracket under your old igniter is intact and only the element has died, this is the minimal correct part. It is an O.E.M. authorized replacement carrying Trane part number IGN00054, and it is the lightest igniter in this whole group at 2.39 ounces. Compare that to the 3-ounce limit switches here and it is the smallest piece of hardware on the list.

Functionality is the quality that carries this part in owner feedback, with build quality and fit following it. What that translates to in practice is simple: it lights the burner and it fits the mount. There is no drama and no clever feature — it is a direct OEM element for the models Trane built around this number.

The honest limit is support and documentation. There is no bracket and no screw set in the box, so if your old hardware is stripped or missing you will be sourcing it separately. Confirm the IGN00054 stamp on your existing part, because a Trane badge alone does not guarantee a match, and this element will not drop into an IGN00145 or 750-101 slot.

Straight swap: a genuine OEM element with no adapter needed when the bracket is already in good shape.

Hardware not included: bracket and screws are not part of this package, so reuse your originals or order them.

Best matched to: a furnace whose existing bracket is reusable and whose part number reads IGN00054.

Not the one for: anyone replacing a full hardware set or working from a different igniter number.

3-Inch Fit

4. C340056P02 – Trane OEM Furnace 3″ Replacement Limit Switch

3″ InsertionScrew Terminals

A screw-terminal limit switch with a 3-inch probe for the airflow path inside a Trane furnace.

This is the shutoff part, not the igniter — the safety sensor that cuts the burner when the heat exchanger gets too hot. The 3-inch insertion probe is the spec to match, because that length puts the sensing element into the moving air where it reads temperature properly. It connects with screw terminals and uses copper contact material, so the wiring job is a straightforward screw-down rather than a push-in plug.

It is sold as a brand new OEM replacement for Trane furnaces and carries a 6 x 6 x 6 inch package footprint at 3 ounces. The insertion actuator type and automatic control mean it opens and closes on temperature with no manual reset to hunt down. That automatic open-and-close means no manual reset to hunt down after a trip.

The item list does not publish an open and close temperature pair for this specific model, so the safest path is matching C340056P02 against the number printed on the switch you are pulling out. Do not substitute it for the SWT01635 or the P18 below just because they look similar — the probe length and terminal layout vary across the family.

Terminal style: screw terminals and copper contacts make the wire connections simple and secure for a DIY swap.

Verify the number: no published open/close temperature pair on this listing, so confirm the part number against your old switch first.

Pick this when: your old limit switch is stamped C340056P02 and uses a 3-inch probe with screw-down wiring.

skip it if: you are guessing — order only after you have read the number off the failed part.

L155-30 Spec

5. Trane OEM Furnace Limit Switch L155-30

L155-303″ Insertion

The L155-30 version, for the Trane furnace that names this exact switch number.

Part numbers in this family look nearly identical on a screen, and that is exactly why the L155-30 stamp matters. This is the P18 variant with a 3-inch insertion probe, a normally open contact, and copper contact material, and it terminates on screw terminals. The actuator is a plunger type, which means the sensing probe itself pushes the switching action rather than relying on a separate lever.

Physically it is a compact piece of kit, listed at 6 x 6 x 6 inches in its package and 3 ounces on the scale. That is the identical weight to the P02 above, so do not expect the two to feel different in the hand — the difference is in the spec sheet and the model compatibility, not the heft. It is compatible with residential heating systems in homes and buildings and is sold as a brand new OEM Trane replacement.

One sizing note worth flagging: this larger-bodied switch is listed at 6 x 6 x 6 inches, versus the far more compact 1 x 1 x 1 inch body of the SWT01635 further down. The footprint difference is real, so measure the mount before you commit. And as with every switch here, the compatible-furnace list is specific — an L155-30 is not a universal fit.

Exact-variant match: the L155-30 designation is the reason to choose this one over its near-identical siblings.

Footprint check: the 6 x 6 x 6 inch package is far bulkier than the small SWT01635 body — confirm your mount clearance.

The right call for: a Trane furnace specifying the L155-30 switch with a 3-inch probe and screw terminals.

Wrong turn if: you are matching on looks alone — the model number, not the photo, decides fit here.

Compact Body

6. OEM Furnace Limit Switch Fits Trane

3 A Current Rating3″ Insertion

A 3-inch limit switch with a published 3 A current rating and metal contacts.

The number to lock in here is the current rating: 3 A, which tells you how much load the contacts are built to switch. It uses metal contact material and a No-nc contact type, and it carries a 3-inch insertion probe just like the other switches in this group. It is sold as a brand new OEM replacement for Trane furnace models with automatic control.

Quality of construction is the bright spot in what people say about this one. Beyond that, the feedback splits — some units work exactly as expected and others report trouble shortly after install, and there is disagreement about whether it is a true OEM Trane part. Screw-hole alignment is another point that comes up, with some finding the install simple and others fighting the mounting.

Treat this as the pick for someone who has confirmed the C340056P04 number and wants the budget-friendly route, not the pick for a first-time guesser. The mixed reports on fit and authenticity mean you should keep the packaging and your order record until the furnace has run a full cycle cleanly. That is a fair precaution on any heat-switch swap, and it is the honest read on this one.

What It Brings

  • Published 3 A current rating gives you a real load figure to check
  • Metal contacts and a 3-inch insertion probe match the family spec
  • Budget-friendly route to a 3-inch Trane-style switch
  • Construction quality is the strongest point in owner feedback

The Honest Caveats

  • Functionality reports are split between working and failing quickly
  • Some question whether it is a genuine OEM Trane component
  • Screw-hole alignment can make the install fussy

Fits your bench if: you have already verified C340056P04 and want the entry-level 3-inch switch.

Not ideal if: you want zero doubt on authenticity — the compact SWT01635 further down carries a clearer parts cross-reference list.

Cross-Reference Pick

7. Trane OEM Thermal Limit Switch SWT01635

Opens 180°FCloses 150°F

The only switch here that publishes both of its trip temperatures up front.

It is the only switch here that publishes both trip temperatures on the listing. It opens at 180°F and closes again at 150°F — meaning the burner cuts out when the plenum hits 180 and returns once things cool to 150. That 30-degree spread is the working band, and it is the figure to match against your original switch before you order. It replaces TDL-42359-36T01B3 and a list of other cross-reference numbers including SWT1635 and SWT01635.

What really separates it is the size. The body is listed at 1 x 1 x 1 inches, against the 6 x 6 x 6 inch package on the C340056P18. So this is the small-footprint option when cabinet space is tight. It uses a push-button actuator (a button you press to operate it), quick-connect connectors (push-on terminals that snap into place), normally open copper contacts (the circuit stays open until the switch is pressed), and a direct control type. It is built for American Standard and Trane air conditioners, heat pumps, and furnaces.

The catch is that it is genuinely a different part from the 3-inch-insertion switches listed above it. If your furnace takes a 3-inch probe, this compact unit is not the substitute. Match the cross-reference list in the product description to your old switch number, and treat that list as the deciding document rather than the photo.

Numbers on the label: the 180°F open / 150°F close pair is stated outright, which removes the guesswork other switches leave you with.

Different form factor: a 1 x 1 x 1 inch body with quick-connect terminals will not swap into a 3-inch-insertion mount.

The one to grab if: your old switch cross-references to SWT01635 or TDL-42359-36T01B3 and you want a stated temperature pair.

Ruled out when: your furnace needs a 3-inch insertion probe — this compact body is the wrong shape.

Know the Specs

Insertion Depth on a Limit Switch

The insertion depth is how far the sensing probe reaches into the furnace’s airflow once the switch is mounted. Several picks here list a 3-inch insertion, while the SWT01635 is built on a much smaller body. The probe has to sit in the moving air to read the real plenum temperature. Too short and it reads cooler than reality, so the burner keeps running past where it should. Match the depth to your original part.

Open and Close Temperatures

A limit switch is a heat-triggered safety shutoff. The “open” figure is the temperature at which the circuit breaks and the burner cuts out. The “close” figure is where it reconnects and allows heating again — the SWT01635 uses 180°F and 150°F. The gap between the two stops the burner from short-cycling on and off. A rating that is too low will nuisance-trip; too high and it stops protecting the heat exchanger.

Igniter Voltage

A hot surface igniter is a ceramic element that glows red-hot to light the gas. It is voltage-specific, and the number has to match what your control board sends. The USA Nitride unit runs at 120 volts and is explicitly not for use on 80-volt systems. Feed a 120-volt element the wrong voltage and it either fails to glow hot enough or burns out early. Check the feed before you spend on a replacement.

Current Rating and Contact Material

The current rating tells you how much load the switch contacts are built to carry — the C340056P04 lists 3 A. Contact material matters too: copper and metal contacts conduct cleanly and resist the pitting that comes with repeated switching cycles. Normally open contacts mean the switch sits open until the heat triggers it closed, which is the standard safety layout on these furnace switches.

Common Questions

How do I know if my furnace needs an igniter or a limit switch?
Watch the startup sequence. If the inducer fan runs and you never see a glow or hear the gas light, the igniter is the suspect — that is the ceramic element that lights the burner. If the flame lights normally and then cuts out a few minutes in, the limit switch is the likely culprit, since it is the heat-triggered shutoff. Your control board’s blink code will usually point one way or the other.
Will the Trane IGN00145 fit my furnace?
Only if your furnace calls for that exact part number. Read the number stamped on your existing igniter or bracket and compare it to IGN00145. The kit includes the igniter, bracket, and three screws so the hardware is covered, but it is not a universal fit for every Trane model. Ordering by brand alone is how people end up with a part that will not mount.
Can I use a silicon nitride igniter to replace a standard one?
Often yes, provided the part number and voltage line up. The USA Nitride 750-101 is a direct replacement for the Trane and American Standard IGN00152 and IGN00146 numbers, and it operates at 120 volts. It is not for use on 80-volt systems. Silicon nitride is a ceramic material the maker says handles heat better than traditional igniters, which is the reason people upgrade to it. Confirm both the part number and the voltage feed first.
What does open at 180°F and close at 150°F mean on a limit switch?
It describes the switch’s working band. At 180°F the circuit opens and the burner shuts off as a safety measure. Once the plenum cools to 150°F the circuit closes again and heating can resume. That spread stops the burner from cycling on and off too fast. If your original switch carries different numbers, you need a part with a matching pair, not the SWT01635.
Does the insertion depth of a limit switch have to match exactly?
It needs to place the sensing probe in the same position in the airflow as the original. Several switches here use a 3-inch insertion, while the SWT01635 is built on a 1 x 1 x 1 inch body. If the probe does not reach the airstream the same way, the switch reads the wrong temperature and can cut the burner at the wrong time. Measure your old probe before ordering a replacement.
Are these limit switches genuine Trane parts?
Read each listing carefully, because the wording differs. The C340056P02 and P18 are described as OEM replacements for Trane, while the SWT01635 carries a full cross-reference list including TDL-42359-36T01B3, SWT1635, and SWT01635. On the C340056P04, owner feedback is divided on the authenticity question. When authenticity matters to you, choose the listing with the clearest parts cross-reference.
Why does my new limit switch keep tripping?
The most common cause is a rating that does not match your original, so the switch opens earlier than the furnace expects. Fit and mounting come into play too — if the probe is not seated correctly in the airflow, it reads a false high temperature. A switch that opens at the wrong figure will nuisance-trip repeatedly. Match the open and close pair to your old part before looking anywhere else.
Can a homeowner replace a furnace igniter without a technician?
It is a mechanical swap that many homeowners do themselves, and these pickups are designed as direct replacements. That said, the work sits inside a gas appliance, so shut off the power and the gas supply before you open the cabinet. Handle a ceramic igniter by its base — these elements crack easily. If you are not comfortable working around gas, a technician is the right call regardless of how simple the part swap looks.
What is the difference between the C340056P04 and the C340056P02?
They are two different variants in the same Trane furnace switch family, so the part number is what separates them. The P02 lists screw terminals and copper contacts with a 3-inch insertion, while the P04 lists a 3 A current rating and metal contacts. Neither is a safe substitute for the other unless your furnace explicitly cross-references to it. Always pull the number off the failed switch rather than matching by photo.
How long should a furnace limit switch or igniter last?
Lifespan varies by part and by how hard the furnace works. The honest caution in this category is that some igniter units in owner feedback give out after a couple of months rather than lasting multiple seasons, so buy the number your furnace specifies and keep your order record. A limit switch with matching temperature ratings generally runs until the contacts wear or the probe fouls. Neither part has a published service-life figure on these listings.

The Bottom Line

For most homeowners, the trane new ignitor limit switch answer starts with the Trane IGN00145. It is the complete OEM kit with bracket and screws in one box, and it is the highest-rated pick of the igniters here. If your furnace takes a different ignition number or you want the more heat-tolerant material, grab the USA Nitride 750-101 and check that 120-volt rating first. When the fault is a heat shutdown rather than a no-light condition, reach for the SWT01635 limit switch. It is the only switch on this list that publishes both its open and close temperatures outright. Read the number off your old part first, and the rest of this list sorts itself.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top