3 Best Watermelon Lights for Trucks | Dual-Color Lens, One Hole

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You want watermelon lights that actually glow the way the photos promise, and you do not want to be back under the mirror resoldering a dead unit a month later. Three Partsam sets cover almost every truck build, and they split cleanly by what they are made of and how many lights you need. The quick answer: buy the glass-lens pair with the stainless bracket if you want the sharpest signal on the mirror, buy the amber/green pair if you need a bottom-mount light instead, and buy the ten-pack if you have a long trailer to light up.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Glass versus plastic is the one spec that changes how a watermelon light looks and how long it survives road grit. Below you get the lens material, the waterproof rating in plain terms, and the wiring color codes spelled out before you drill a single hole for the watermelon lights for trucks.

Top Picks

Partsam 2Pcs Glass Watermelon Lights with Stainless Steel Bracket
Best OverallPartsam 2Pcs Glass Watermelon Lights4.0+★90+ ratingsGlass lens, stainless bracket, and a starburst that stays legible in the mirror. This is the set to buy if the lights live on your side mirror.Check price on Amazon

How To Choose The Best Watermelon Lights for Trucks

Start with where the light is going, not with how bright the listing claims it is. A mirror-mounted turn signal takes a different housing than a grille bullet or a trailer side marker. Pick the housing for the mounting spot before you drill, because a 3/4-inch hole is not undoable.

Lens material decides the look and the abuse it takes

Glass gives you tighter, sharper lines in the light pattern, which reads as a cleaner signal from a distance. Plastic with a chrome-plated frame is lighter and takes a pothole hit without shattering. Neither is wrong — glass is for the mirror, where you want the crisp look, and plastic is fine for grille and side-marker duty.

Match the waterproof rating to how you wash the truck

An IP65 rating means the housing shrugs off water jets, rain, sand, and dust. IP67 adds protection against brief immersion, which matters if your lights sit low on the bumper or under the bed. If you pressure-wash the truck weekly, take the higher rating seriously.

Count the lights you actually need before you order

A two-piece set covers your mirrors or a single bumper spot. A ten-piece pack covers a trailer’s full length, a headache rack, and spares. If you need more than two lights, the ten-pack gives you 10 lights instead of the 2 in a glass set.

Side-by-Side Comparison

Model Best For Lens Material Waterproof Rating Lights In Set Amazon
Partsam 2Pcs Glass Watermelon Lights★ Best Overall Mirror turn signals Glass IP65 2 Amazon
Partsam 2Pcs Dual Color Watermelon Lights Bottom and marker duty Glass IP65 2 Amazon
Partsam 10Pcs 3/4 Inch Amber Blue Mini LED Watermelon Lights Full trailer and grille runs Plastic IP67 10 Amazon

Detailed Reviews

★ Best Overall

1. Partsam 2Pcs Glass Watermelon Lights

Our pick — 4.0+★ from 90+ verified ratings; the strongest balance of quality and price.

Glass LensStainless Steel Bracket

Glass lens, stainless bracket, and a starburst that stays legible in the mirror.

This is the set to buy if the lights live on your side mirror. The bracket is the difference-maker — it is stainless steel, so it resists corrosion and holds the housing firmly even over washboard pavement. You get two lights in the box, and each one runs the dual amber/blue color split. Mounting is universal, so it fits most 12V semi trucks, heavy trucks, and utility vehicles, including Freightliner, Peterbilt, and Kenworth builds.

The glass lens is what you notice in use. Partsam designs it to throw a customized high-powered LED starburst pattern, and glass carries that pattern with sharper, more detailed lines than plastic — which is exactly what makes a turn signal readable at a distance when a car is coming up on your quarter. For mirror duty, that crisp look is the whole point.

The honest catch is the waterproof score and the value question. This pair carries an IP65 rating, which handles rain, dust, and water jets, but it is a step below the IP67 that the ten-pack mini LEDs carry — so low bumper placement on this set is a weaker idea than mirror placement. Feedback on what you get for the money splits both ways, with some owners calling it super affordable and others feeling the money was wasted. If the glass-and-bracket build is not what you are after, the amber/green glass set below is the same construction with a different color pair and a lower rating at a higher price.

Where it wins

  • Pure glass lens throws a sharper, more detailed starburst than a plastic lens
  • Stainless steel bracket resists corrosion and stays put on rough roads
  • Works as a mirror turn signal or an under-glow light on most 12V trucks
  • Quality is the thing that gets talked about most in the feedback, and it is positive

Where it asks you to compromise

  • IP65 rather than IP67, so keep it higher up and out of deep standing water
  • Only two lights per set, which leaves no spare if one takes a rock
  • Value opinions are mixed — you are paying for glass and stainless

Buy this one if: your watermelon lights are going on the side mirrors and you want the glass look with a bracket that holds up.

Hold off if: you need a low bumper mount or a full trailer run — the ten-pack below covers more ground with a higher IP rating.

Top Performer

2. Partsam 2Pcs Dual Color Watermelon Lights

Amber/Green SplitStainless Steel Bezel

Thick glass, a classic amber-and-green split, and enough feedback to trust it.

Here is the number that tells the story: the amber/blue pair above has 90+ ratings, while this amber/green set has 141. That is more owners weighing in on the same glass-and-stainless recipe, and the response lands on top quality and real brightness. The aspect counts back it up — quality draws the most positive attention of any trait here, with brightness close behind and value following.

Build-wise this is pure thick glass, which gives a brighter output than thin plastic, paired with a stainless steel bezel that resists corrosion and wear. The housing is IP65 rated, so it takes water, sand, dust, rain, and snow without complaint — the same rating as the mirror set, and still a notch under the IP67 mini LEDs. The three-wire pigtail is where a lot of buyers get stuck, so read this before you cut anything: white is ground, red is the amber wire for your turn signal or marker light, and black runs the green light as an auxiliary.

Placement is where this one pulls ahead of the mirror set. Partsam positions it for bottom placement and air cleaners, and it works as a marker light or an under-glow light. That extra mounting freedom is why it edges out the amber/blue pair — but the durability notes are real. A handful of units burn out early, which is the trade-off you accept on a small incandescent-style housing with high output. Wiring it through a proper fuse and checking your ground first is the cheap insurance that keeps that from being your story.

The brightness read: glass plus a customized high-powered LED gives a starburst pattern with lines sharp enough to register from a distance, and brightness is the second-most-praised trait in owner feedback — so the light does what the listing says.

The one to plan around: early burnouts show up in the reports. Not every unit, but often enough that buying a spare pair or wiring through a fuse is the smart move rather than an optional one.

Reach for this if: you want a bottom or air-cleaner mount, the classic amber/green split, and the pick with the deepest owner feedback of the glass sets.

Look elsewhere if: you refuse to gamble on longevity — then the ten-pack below is the more forgiving buy.

Best for Big Rigs

3. Partsam 10Pcs 3/4 Inch Amber Blue Mini LED Watermelon Lights

Ten LightsIP67 Waterproof

Ten bullet lights, a 3/4-inch hole, and the highest waterproof rating of the three.

The pack includes 10 pieces against 2 per glass set — and that is the entire reason this pack exists. If you are lighting a trailer’s full guardrail, a headache rack, or every marker spot along the cab, you buy the bundle and stop rationing. Each unit is a 3/4-inch round bullet with a transparent plastic lens and colored SMD LED beads. Partsam rates these SMD LEDs at up to 100,000 hours, so the beads should outlast the truck.

This is also the only set here rated IP67, against IP65 on both glass pairs. The extra step up in sealing means brief immersion is not an instant problem — so bumper corners, low bed mounts, and under-box lighting are all fair game. The lens is mirror-polished with a chrome-plated plastic frame, and the whole unit is light and portable, which makes a rock strike a swap rather than a rebuild. Wiring is a three-wire hard connection: white to ground, yellow to the amber side marker, blue to the blue side marker.

Two things to plan for. First, this is a bullet light, not a glass starburst — the look is a bright round marker, not the detailed glass pattern of the two pairs above. Second, mounting means drilling a clean 3/4-inch hole in flat plate, so measure twice and use a step bit or the holes will leak past your seal. The housing is 1.5 inches across with the protective trim bezel and 1 inch without it, with a 25 mm height, so check your clearance on tight grille spots before you commit.

What the pack buys you

  • Ten lights in one box covers a full trailer or grille run without a second order
  • IP67 rating — the highest here — so low and wet mounts are fair game
  • Three interchangeable functions per unit: marker, bottom light, or turn signal

What you give up

  • Plastic lens means a bright marker look, not the glass starburst
  • Every unit needs a drilled 3/4-inch hole — no bracket mount like the glass pairs
  • Lower owner rating than either glass set despite the higher IP score

The math favors you: if you need more than two lights, ten bullet markers with an IP67 seal is the practical buy — just measure your hole before the drill goes in.

Understanding Specs

Lens material: glass versus plastic

A glass lens carries the LED’s starburst pattern with sharper, more detailed lines, which is what makes a mirror turn signal read clearly at distance. A plastic lens with a chrome-plated frame is lighter and more forgiving on a rock hit, and it makes a bright round marker rather than a detailed pattern. Glass wins on looks, plastic on surviving a rock strike.

IP waterproof ratings

IP65 means the housing shrugs off water jets, rain, dust, and sand. IP67 adds protection against brief immersion, so a light mounted low on a bumper or under the bed handles standing water better. Match the IP rating to the mounting spot: IP65 for mirror and grille duty, IP67 for low bumper and under-bed mounts.

Three-wire pigtails and what each color does

A three-wire hard connection gives you ground plus two colors. On the mini bullet lights, white is ground, yellow runs the amber marker, and blue runs the blue marker. On the amber/green glass set, white is ground, red runs amber for the turn signal, and black runs green as an auxiliary.

Why a 3/4-inch hole matters

Bullet-style mini markers mount by drilling a 3/4-inch hole in flat plate. The housing’s outer trim bezel measures 1.5 inches across and 1 inch without it, with a 25 mm height. A clean hole and a proper seal keep the IP67 rating honest; a ragged hole lets water past the gasket no matter what the label says.

Common Questions

Will these watermelon lights fit my Kenworth or Peterbilt?
The glass sets are listed as universal fit for most 12V semi trucks, heavy trucks, and utility vehicles, with Freightliner, Peterbilt, and Kenworth named specifically. The mini LED pack is also universal fit. Check that your truck runs a 12V system and that your mounting spot matches the housing — mirror bracket, bumper surface, or a drilled 3/4-inch hole.
What is the difference between amber/blue and amber/green watermelon lights?
It is the second color in the split. The amber/blue pair and the amber/blue mini pack both run amber plus blue. The amber/green glass set runs amber plus green instead. Which is legal for your use depends on your state’s lighting rules for marker, clearance, and auxiliary lights — check your local code before wiring.
Can I use watermelon lights as turn signals?
Yes on the glass sets — both are designed with a bracket or bezel for mirror and bumper turn-signal duty, and the listing describes the light issuing a warning signal when turning. On the mini LED pack, each unit can be installed as a marker light, bottom light, or turn signal. Wire the amber lead to your turn signal circuit and the other color to a constant or auxiliary feed.
How do I wire a three-wire watermelon light?
Ground first. On the amber/green glass lights, white is ground, red is amber for turn signal or marker duty, and black is green for auxiliary. On the mini bullet lights, white is ground, yellow is the amber side marker, and blue is the blue side marker. Run it through a fuse and test each color before you button the panel back up.
Is IP65 enough for a truck that gets pressure-washed?
IP65 handles water jets, rain, sand, dust, and snow, so normal washing is fine. It does not cover brief immersion. If your lights sit low on a bumper or under the bed where water pools, the IP67 mini LED pack is the safer pick for that spot.
How long do these LED watermelon lights last?
Partsam rates the SMD LED beads in the mini bullet lights at up to 100,000 hours. That is the LED’s rated life, not a guarantee against a bad unit or a wiring fault. The glass sets carry no lifespan figure in the listing, and early burnouts do get reported on the amber/green set.
What size hole do the mini watermelon lights need?
A 3/4-inch hole drilled in flat plate. The housing measures 1.5 inches across with the protective trim bezel and 1 inch without it, at 25 mm tall. Use a step bit for a clean edge and seal the gasket properly so the IP67 rating holds.
Should I buy a two-light set or the ten-pack?
Two lights cover a pair of mirrors or one bumper spot. Ten covers a trailer guardrail, a full grille run, or a cab roof plus spares. If you are lighting a long trailer or want spares on hand, the ten-pack is the practical order. If you only need mirror signals with the glass look, a two-piece glass set is the right buy.
Do the glass lens lights break easily?
Glass is glass — a direct rock strike can crack it where a plastic lens would shrug it off. That is the trade-off for the sharper starburst pattern. The stainless steel bracket on the mirror set keeps the housing firmly fixed, so most of the risk is debris hitting the lens, not the mount failing.
Can I use watermelon lights as under-glow lights?
Both glass sets are listed for under-glow use as well as marker and turn-signal duty. The mini LED pack can also be installed as a bottom light under a cargo box. For under-body placement, the IP67 mini pack is the better match because it handles brief immersion.

The Bottom Line

For most truck builds, the winner is the Partsam 2Pcs Glass Watermelon Lights with Stainless Steel Bracket, because the glass lens throws a sharp starburst and the stainless bracket holds firm over rough roads at the mirror position. If you want more owner feedback behind the buy and a bottom-mount-friendly glass set, the amber/green glass pair is the one — just plan for the occasional early burnout and fuse your wiring. And if you are lighting a trailer or a long grille run, the ten-pack of 3/4-inch mini LEDs gives you the most lights and the highest IP rating of the three.

One last nudge: the glass sets are the picks with real customer feedback behind them, and the amber/green pair carries the deepest feedback of the two glass options — so if you are torn between glass designs, start there.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top