Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your top-load washer has stopped turning the load over — or worse, sounds like it is chewing gravel on the spin cycle — a cracked washplate (the spinning disc at the bottom of the drum that moves clothes through the water) is almost always the culprit. A new washplate restores the turning motion for a fraction of the cost of a new washer. Before you order anything, check the part number stamped on your existing plate, because a washplate fits specific models, not every machine. This guide covers seven replacement washplates and impellers that owners of LG, Maytag, Whirlpool and GE machines actually keep in service.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see which plate handles which brand, how the plastic face and the metal spine differ between parts, and where a thread strip can bite you. Read on for the washing machine impeller picks that match your model number the first time.
Top Picks


How To Choose The Best Washing Machine Impeller
To order the right part, you need three things: your washer’s model number, the diameter of the plate already in the drum, and whether your machine uses a flat washplate cap or an impeller-and-sleeve set (a spinning disc with a separate sleeve). Match all three and the swap is a bolt-out, bolt-in job.
Match the part number first, the size second
A washplate is not a universal part. Each one is molded for a specific family of washer models, so the number stamped on the underside of your old plate is your starting point. Cross-check it against the replacement numbers listed for a candidate part — for example, the AGZ72909711 replaces AGZ72909702, PS12588963, 4873462 and AP6800730 — and never assume a similar-looking plate will drop in. Diameter matters too: the AGZ72909711 measures 18.25 x 18.25 x 2.4 inches, while the W10215115 comes in at 16.5 x 16.5 x 5.9 inches, so those two do not swap.
Know whether your machine uses a washplate or an impeller sleeve
Most top-load washers use a flat washplate with a small cap in the center of the drum. Some machines run an impeller mated to a separate connect sleeve, and the Supplying Demand 12138000069557 set pairs those two pieces together. If your washer has a round, low-profile agitator hub rather than a flat disc, check whether the sleeve is part of the failure — replacing the impeller alone will not fix a worn sleeve.
Watch the center hub and the plastic, not the top face
The failure you hear is usually at the center where the plate threads onto the shaft, not on the fins. That is why a plate can look pristine on top and still be shot. Consider the weight of the part: the AGZ72909711 weighs 4.39 pounds, while the W10902814 Maytag plate is 1.3 pounds, so a heavier, metal-backed plate carries more substance into the drum.
Side-by-Side Comparison
| Model | Best For | Fit | Weight | Material | Amazon |
|---|---|---|---|---|---|
| AGZ72909711 Agitator Plate★ Best Overall | LG and Kenmore top-loaders | 18.25 in diameter | 4.39 lb | Stainless steel face, ABS back | Amazon |
| W10902814 Washplate With CapBest Value | Maytag Bravos machines | 16.1 in diameter | 1.3 lb | Plastic | Amazon |
| W10215115 Washplate | Whirlpool and Inglis | 16.5 in diameter | — | Plastic | Amazon |
| W10553968 Washplate | Whirlpool and Maytag MVWX series | 16.5 in diameter | — | — | Amazon |
| Supplying Demand 12138000069557 | Impeller and sleeve together | 18 in diameter | 1.5 lb | — | Amazon |
| WH43X32857 Washplate | GE top-loaders | 20 in long | 15 lb | — | Amazon |
| Replacement WH43X32857 | GE GTW models | 20 in long | 15 lb | — | Amazon |
Detailed Reviews
1. AGZ72909711 Agitator Plate without Washer Pulsator Cap
Our pick — 4.5+★ from 200+ verified ratings; the strongest balance of quality and price.
A metal-faced LG plate that puts real heft back between your clothes and the drum.
Start with the build, because it is what separates this one from the plastic plates below. The AGZ72909711 uses a stainless steel surface over a high-quality ABS plastic back, so the part that rubs against your laundry is metal rather than bare plastic. It carries 4.39 pounds into the drum and measures 18.25 x 18.25 x 2.4 inches. For an LG owner hearing the drum spin without the load turning, that substance is the difference between a repair that holds and one that rattles loose.
The compatibility list is the real draw. This plate crosses to AGZ72909702, PS12588963, 4873462, AP6800730, EAP12588963, AGZ72909703, AGZ72909706, AGZ73050601 and more, and it covers a long run of LG WT models plus Kenmore 796 series machines. One number it will not fit is AGZ72909701, so check the underside of your old plate for that exact code before you buy. It ships with the 5006EA3009B pulsator cap included, so the whole assembly goes in at once.
Once installed, the plate pivots back and forth to circulate the load instead of letting it sit in a knot. A 1-year manufacturer warranty backs it. The honest catch is the weight: at 4.39 pounds it is far heftier than the 1.3-pound Maytag plate above. Its deeper profile means you must seat it flat and torque the center bolt properly, or it will not run true.
Where it earns its keep
- Stainless steel top surface over an ABS back resists wear at the laundry contact point
- Crosses to eleven-plus replacement numbers, covering long runs of LG WT and Kenmore 796 models
- Pulsator cap included, so the full assembly installs in one go
- Solid 4.39-pound build that feels like a real machine part
Before you order
- Not compatible with AGZ72909701 — verify your stamped number first
- The heavier build and deeper profile demand careful seating and a properly torqued bolt
Reach for this if: you own an LG WT-series or Kenmore 796 top-loader and want a metal-faced plate that carries real weight.
Check first: confirm your model is not on the AGZ72909701 exclusion, since that plate will not drop in.
2. W10902814 Washplate
The featherweight Maytag fix — 1.3 pounds of plastic that gets the drum turning again.
If your Maytag Bravos has started clicking and spinning without moving the wash, this is the plate built for it. It is a plastic washplate at 16.1 x 16.1 x 1 inches and just 1.3 pounds, so the install is a light, one-handed lift into the drum rather than a wrestling match. That 1.3-pound figure is also why it feels so different from the AGZ72909711 — you are handling a fraction of the mass.
Installation is genuinely quick once you know the drill: kill the power and water, pop the little center cap, hold the drum, crank the socket wrench, and wiggle the old plate up. The part fits Maytag models MVWB755DW1, MVWB835DW1, MVWB855DW1, MVWC555DW0 and many more, and it replaces W10597581, W10609480, W10752287, W10834893 and other numbers in the large cross-reference list. A 3-month manufacturer warranty covers it.
The recurring gripe is durability at the center hub — the threads on some units strip out within a few months. Treat the thread engagement carefully and it holds; force it and it will not. A lively install habit goes a long way on this one, so take the extra minute to seat it flush.
The quick-read beauty: a 1.3-pound plastic plate that installs in a couple of minutes and covers a long list of Maytag Bravos models.
Where to tread lightly: the center hub threads are the weak point over time — some plates strip out after a few months of use, so a careful, flush seat matters more than speed.
Built for: Maytag Bravos owners who want a light, no-fuss plate that goes in fast.
Think twice if: you tend to over-torque the bolt — the plastic hub does not forgive a forced thread.
3. W10215115 Washer Washplate
The Whirlpool-family plate that turns back and forth to keep the load circulating.
This is the plate for the Whirlpool, Crosley and Inglis crowd. W10215115 fits that family of top-loaders and swaps out WPW10215115, AP6017209, PS11750504, W10215118, 1872547 and EAP11750504 — a broad net that covers a lot of machines on one drum. It measures 16.5 x 16.5 x 5.9 inches, a deeper face than the 16.25-inch Maytag plate above, so check the drum cavity before you commit.
Once seated, the plate pivots back and forth at the bottom of the spin basket to push water and clothes around the load. The material is a premium plastic built for durability, and the maker subjects it to testing for long-term use. Model coverage runs from 7MWTW1750YW0 and 7MWTW1950YW1 through CAW12444 and the 4GWTW5550 and WTW4950 series.
Here is the fair warning. Fit is the most-discussed point on this plate, and the honest word is mixed — some buyers find it seats perfectly, others find it takes fiddling to sit right. The photo can also look like plenty of similar plates, so measure your old face plate before you order. Treat fit-checking as part of the job and the install goes much easier.
Why it earns a slot: a Whirlpool-family plate with a wide replacement-number list and a durable plastic build for the price.
The one to weigh: fit can be finicky — a few owners had to work at getting it seated — so measure first and expect a little patience.
Go here if: you are running a Whirlpool, Crosley or Inglis top-loader and want one plate that covers a broad model list.
Measure first if: you are unsure of your drum size — the deeper 5.9-inch profile is not for every machine.
4. W10553968 Washplate Compatible with Whirlpool Maytag Washer
A Whirlpool-Maytag plate aimed at the MVWX and MVWC workhorses that carry a full family load.
The W10553968 crosses into a big pool of Whirlpool and Maytag models — the MVWX500, MVWX550, MVWX600, MVWX700 lines, the MVWC400 and MVWC450 series, and plenty of 7MM and 4GM variants. If your machine is in that family, this plate is in the running. It measures 16.5 x 16.5 x 4.5 inches and replaces WPW10553968, AP6022884, W10215116, 3021794, PS11756221 and several more. A 1-year warranty is the safety net.
There is a helpful quirk here that stands out from the plate-only options. Washplates for this family look alike and differ in subtle ways, so a back-and-forth that confirms the match saves you a return trip.
What this one really teaches is a buying lesson: the compatibility list is long and the fit has to be verified, so do not order on looks. Check your model against the long applicable list before you buy. Confirm your model against that list before you order.
Standout move: the maker offers model-number confirmation, so you can verify your washer before you commit.
Do not skip: this is a long compatibility list, and the plate is not a one-size part — match your MVWX or MVWC model before ordering.
Best fit for: Whirlpool and Maytag MVWX or MVWC owners who want confirmation before they buy.
Steer clear if: you are not going to look up your model number — this is not a pick-and-hope part.
5. 12138000069557 Washing Machine Impeller
The only set here that pairs the impeller with its sleeve — replace both and skip the repeat.
Most of the parts above are single plates. This one is different: it ships as an impeller and a connect sleeve together, so both halves of the drive connection land on your doorstep at once. It measures 18 x 18 x 4.25 inches and weighs 1.5 pounds, and it replaces part numbers AP7244296 and PS18227554. For a machine where the impeller wobbles and the sleeve is worn, buying the pair is the smarter move than chasing one piece at a time.
The design rationale is simple. A fresh sleeve reduces the wear on the impeller, and a fresh impeller gives the sleeve a square seat. Fitting both at once means the two surfaces wear in together rather than one fighting a tired partner. The maker describes a straightforward install with a fit for a variety of washing machines.
The catch on this set is the warranty structure: 30 days on new and unopened items and a 90-day limited manufacturer’s warranty on compatible models. That is a shorter runway than the 1-year terms on some of the single plates, so it pays to install and check it quickly. Confirm your model against the AP7244296 and PS18227554 cross-reference before ordering, since the 90-day window is short.
What makes it different
- Impeller and connect sleeve ship as a matched pair, so you replace the whole drive joint
- Replaces AP7244296 and PS18227554 in one order
- Light 1.5-pound assembly that installs without heavy lifting
Read the fine print
- Warranty is short — 30 days on unopened items and 90 days limited on compatible models
- Match your machine carefully before ordering to stay inside that window
Best for: owners whose washer needs both the impeller and the sleeve replaced at the same time.
Weigh if: the short 90-day limited warranty makes you want to confirm compatibility before you commit.
6. WH43X32857 Washplate Impeller Agitator Plate for GE Washer
A GE-specific plate with a solid one-year warranty and a direct replacement number.
If your GE top-loader has stopped agitating or now thumps during the spin, the WH43X32857 is the dedicated fix. It replaces WH43X32857 and stands in for machines running the WH43X30198 and WH43X24152 impellers. Built from high-quality materials to match or exceed original factory specs, it pivots back and forth at the bottom of the spin basket to move the load through the water — the same motion the old plate gave before the center hub wore.
The manufacturer backs it with a one-year warranty, which puts it ahead of the shorter terms on a couple of the sets above. Installation is designed to need no special tools, and the part is aimed at exactly the faults you would notice: a washer that will not agitate, noise on the spin cycle, or unbalanced loads.
One thing to note honestly — this is not a universal part. It is a GE-specific plate, so check compatibility before ordering, and do not count on it dropping into a Whirlpool or Maytag drum. If your machine is a GE, the fit works out; if it is not, look elsewhere in this list.
Why GE owners like it: a direct replacement number, a year of warranty, and an install that needs no special tools.
Important to know: it is GE-only — this plate will not fit the Whirlpool or Maytag machines covered above.
Go here if: you have a GE top-loader that will not agitate or sounds rough on the spin.
Not for you if: you are running a non-GE brand — this is a brand-specific plate, not a universal swap.
7. WH43X32857 Washplate Impeller
The same GE number with a two-year warranty and a long GTW model list behind it.
This second GE plate uses the same WH43X32857 number as the pick above, but it comes with a two-year warranty rather than one. Its long fit list covers many GTW models: GTW490ACJ0WS through GTW490ACJ7WW, GTW500, GTW540, GTW680, GTW720 and GTW750. If you own one of those machines, the longer warranty is the reason to look here first.
The function is the same as any washplate: it pivots back and forth at the bottom of the spin basket to circulate the load. It also replaces WH43X30198 and WH43X24152, so a machine with either of those originals can take this plate. If your washer was the type that stopped turning clothes over, this restores the motion.
Where this one asks more of you is the buying check. Both it and the plate above share the WH43X32857 number, so the match to your drum depends on your exact GTW model rather than the number alone. Confirm your model appears in the list, then order. Confirm your exact GTW model is listed, then the swap is a straightforward bolt-out, bolt-in job.
The case for this plate
- Two-year warranty — the longest of the GE-fitted options here
- Wide GTW model coverage including GTW490, GTW500, GTW540, GTW680, GTW720 and GTW750
- Replaces both WH43X30198 and WH43X24152 originals
Do your homework
- Shares its part number with the GE plate above, so model confirmation is on you
- Warranty only helps if the plate is actually the right fit for your drum
Best for: GE GTW-series owners who want the longer two-year warranty and a wide model list.
Check before you buy: confirm your exact GTW model is listed, since a matching part number alone does not guarantee the drum fit.
Know the Specs
Diameter and depth
The diameter is simply the width of the plate across the drum — the AGZ72909711 runs 18.25 inches across, while the W10902814 is 16.1 inches. If the plate is too wide or too narrow, it will not seat flush and the drum will spin out of balance. Depth tells you how tall the face sits: the W10215115 is 5.9 inches deep, deeper than most plates here, so check clearance in your drum before ordering. Always match both numbers to your old plate, not just one.
Weight and material
Weight is a rough proxy for how much substance a plate carries. The AGZ72909711 weighs 4.39 pounds with a stainless face and ABS back, while the W10902814 is 1.3 pounds of plastic. A heavier plate can feel more planted in the drum, but it asks more of the center bolt to hold it true. Plastic plates are lighter and cheaper but wear at the hub over time; a metal-faced plate lasts longer at the contact point, at the cost of more mass to handle.
Washplate vs impeller-and-sleeve
Most top-load machines use a flat washplate with a small cap in the middle. Some use an impeller paired with a connect sleeve, and the Supplying Demand set combines both pieces. If your washer wobbles and the sleeve is worn, replacing the impeller alone leaves a tired partner in place. Buying the pair lets the new surfaces wear in together.
Warranty length
The terms here range from 30 days and 90 days on the Supplying Demand set, to one year on the AGZ72909711 and the WH43X32857 plate, to two years on the GTW replacement. A longer term only helps if the plate actually fits your model, so pair the warranty with a compatibility check before ordering.
Common Questions
How do I know which washplate fits my washer?
Is a washplate the same as an impeller?
Why does my washer spin but not move the clothes?
How hard is it to install a washplate?
Can a plastic washplate last as long as a metal one?
Will a Maytag washplate fit a Whirlpool machine?
What if my washplate makes a clicking noise during the spin?
Do replacement washplates come with the center cap?
How long is the warranty on these replacement parts?
Can I replace the impeller and sleeve separately?
The Bottom Line
For most LG and Kenmore owners, the washing machine impeller winner is the AGZ72909711 Agitator Plate. It has a stainless steel face over an ABS plastic back and a long cross-reference list covering many WT and 796 models. If you want a light, fast install for a Maytag Bravos, choose the W10902814 Washplate at 1.3 pounds. For GE GTW top-loaders that need a longer warranty, the Replacement WH43X32857 with two years is the one to reach for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




