Match the freezer’s cubic footage to your household’s food volume, then confirm height, width, depth, and ventilation clearance against your actual kitchen opening.
A tape measure settles this faster than any spec sheet. Most people pick a capacity first, order it, then discover it won’t clear the basement stair turn or the door can’t swing past the wall. GE Appliances’ sizing guide puts a hard number on clearance — at least 1 inch at the top and back for heat to escape — and that inch is where a lot of installs die.
What Capacity Does Your Household Actually Need?
Those ranges are a starting point, not a verdict. Shopping frequency, bulk buying, and scratch cooking move the number more than headcount. A couple buying a quarter of a cow twice a year needs far more space than two people who shop three times a week. Answer two questions honestly: how often do you restock, and how much food arrives frozen in bulk?
How Do You Measure the Opening, the Route, and the Door Swing?
Measure the opening in height, width, and depth against the manufacturer’s published product dimensions, not a retailer’s rounded summary. Then measure the whole path: exterior doorways, interior doors, hallways, stairwells, and every turn.
GE warns that an appliance must fit through the front door and along the route to the kitchen before installation, so walk that route with the tape and write down the narrowest point. A 34-inch-wide freezer doesn’t fit through a 30-inch doorway no matter how well it fits the alcove.
- Top and back: reserve at least 1 inch for heat to escape.
- Hinge side: allow roughly 2 inches where the door swings beside a wall, or accept that the unit projects farther forward.
- Door swing: check clearance against islands, cabinets, and traffic paths — a door that opens only partway means the bottom drawer won’t pull out.
- Depth: include handles and hinges, not just the cabinet box.
If you’re comparing specific units, the tested upright refrigerator freezer roundup pairs real dimensions with real capacity, saving a lot of cross-referencing.
What Do Current GE Models Show About Size and Price?
GE’s product pages list capacity, dimensions, and pricing together, and the spread shows why measuring first pays off. Listed prices may be sale or clearance figures, not universal retail prices.
| GE Model | Capacity and Height | Listed Price |
|---|---|---|
| FUM5SNWW | 5.0 cu. ft.; 33 1/2 in. tall | $329 clearance |
| FUF14DTRWH | 13.7 cu. ft.; 59 in. tall | $519 clearance |
| FUF17DTRWH | 16.7 cu. ft.; 64 1/2 in. tall | $609 clearance |
| FUF20SURWW | 20.3 cu. ft.; 70 in. tall | $719 clearance |
| FUF14SZRWW | 14.3 cu. ft. convertible; 59.88 in. tall | $649 sale |
| FUF22DZRWW | 21.6 cu. ft. convertible; 66.73 in. tall | $919 sale |
| FUF20DHRWW | 20.2 cu. ft.; 72 in. tall | $949 clearance |
GE’s refrigerator size guide lays out the full measurement method.
Which Mistakes Cost People the Most?
Picking capacity by household size alone is the most common error and the easiest to avoid; GE stresses that eating and shopping habits matter more than headcount. Five traps account for most returns and install failures:
- Measuring the cabinet opening but not the appliance’s actual depth, handles, and hinge envelope.
- Skipping the delivery path — narrow doorways and stair turns stop more units than kitchen layouts do.
- Forgetting top and rear ventilation space, which can block heat dissipation.
- Treating nominal cubic feet as fully usable without checking shelf spacing and drawer geometry.
- Assuming a garage-ready or convertible model runs like a standard indoor freezer — verify the exact model’s documentation.
GE also recommends opening candidate models in person to confirm shelves reposition or come out and that tall containers, wide pizzas, and sheet cakes fit. Cubic footage tells you volume; the interior tells you whether you can use it.
One last habit: treat a clearance price as a sale price, not a permanent one.
Common Questions
How do I calculate a freezer’s interior volume myself?
Multiply interior length × width × height in inches, then divide by 1,728 — the number of cubic inches in one cubic foot (GE’s formula). Measure the usable interior, not the exterior shell, since walls and insulation take up space you can’t fill with food.
Can I put an upright freezer in my garage?
Only if the exact model is rated for it. Garage-ready and convertible units are built for wider ambient temperature swings, but the rating is model-specific. Check the installation instructions and owner’s manual before you commit, since a standard indoor freezer may not hold temperature in an unheated garage.
Is a taller freezer always bigger inside?
No. Height alone doesn’t determine capacity — width and depth carry equal weight. GE’s 20.3 cu. ft. model stands 70 inches tall at 32 inches wide, while the 20.2 cu. ft. version reaches 72 inches at 34 inches wide. Two units of nearly identical volume can have very different footprints.
Sources
- GE Appliances. “Refrigerator Size Guide” Supplies the capacity ranges, ventilation clearances, and the 1,728 cubic-inch conversion.
- GE Appliances. “Refrigerator Buying Guide” Covers delivery-path measurement, interior layout checks, and habit-based sizing.