Truck Sun Shade Sizing Guide: How to Measure Your Windshield | Measure Twice, Buy Once

Measure the widest point between your truck’s A-pillars and the height from dashboard to headliner at the glass center, then match both numbers to the shade’s listed size.

The fix is the same for any pickup: take two measurements from inside the cab, where the shade will sit, then compare against the manufacturer’s published numbers.

How To Measure Your Windshield In Four Steps

Work inside the cab with doors closed, parked out of direct sun. Skip the “large” or “truck” label on the package; those words mean little across the pickup market.

  1. Measure maximum width. Run the tape across the usable glass at its widest point, typically A-pillar to A-pillar just above the dashboard. Don’t measure at eye level — glass flares wider lower down on most trucks.
  2. Measure center height. Go from the top of the dashboard to the upper edge of the glass or headliner, straight up the middle.
  3. Check both side heights. Many truck windshields taper as they rise; the shortest, most restrictive section decides whether a shade binds or sags.
  4. Note the mirror and sensor housing. Mark where the rearview mirror mount, rain sensor, and forward-facing camera sit. Your shade needs a notch or slit to clear them.

For a custom-cut shade, the maker’s instructions settle it. A shade slightly under your measurement sits flatter than one slightly over.

What Size Shade Fits A Full-Size Truck?

No single size covers every pickup: windshields vary by model year, cab configuration, trim, mirror assembly, camera package, and glass curvature. Published dimensions are a sanity check, not a guarantee.

Shade Listed Size Fit Note
Autoamerics Truck Shade 64 in wide × 33.5 in tall Wider or taller windshields stay uncovered
AAA/RoadPro Truck Sunshade ~57 in × 31.2 in Heat reflection and UV blocking
Retractable truck/SUV shade Up to 31.5 × 74.8 in Adjustable; trim excess material
Eclipse custom shade 20–29 in heights Round down; sensor options
Autoamerics folded ring 29.5 in diameter Storage clearance, not coverage
Ford F-150 (crew cab) ~62–64 in × 30–32 in Measure your own — varies by trim
Ram 1500 (new body) ~60–62 in × 30–33 in Mirror housing narrows usable width

A listed figure may describe the unfolded shade, the folded storage ring, or an adjustable maximum — read the wording before comparing it to your tape. When shortlisting, this roundup of the best truck sun shades for real-world fit pairs tested options with their published measurements.

Mistakes That Ruin The Fit

  • Measuring the dashboard opening or interior trim instead of the glass.
  • Assuming “universal” or “truck” guarantees a fit.
  • Ignoring the mirror, rain sensor, or driver-assist camera housing.
  • Buying on width alone while overlooking height and taper.
  • Choosing a shade smaller than the glass, leaving exposed corners.
  • Using a rigid straight-line method that ignores windshield curvature.

Even a custom shade may not cover every edge of glass; Husky’s Custom Sun Shades instructions warn that some vehicles don’t allow complete coverage.

Fit is only half the job. The shade must never block the rearview mirror, forward-facing cameras, rain or light sensors, or the VIN window, and it comes out before you drive. Some reflective shades should face outward toward the sun, per the product’s instructions. AutoZone’s sunshades and sunvisors section covers materials and options. Prices and stock change too often to quote reliably, so check the current listing; Weffort’s fitting guide makes the same point: measure first, then buy.

Common Questions

Can I use a sedan shade in my pickup?

Sometimes, if the measurements match. Sedan shades often run narrower, and a full-size truck windshield typically measures 60 to 64 inches across. Tape it first, and check height and mirror notch too.

Should I measure the folded or unfolded shade size?

Measure unfolded coverage for fit; check the folded ring diameter only for storage. Listings sometimes quote one number and mean the other, so read carefully.

What if my windshield has a large sensor housing?

Look for a shade with a large-sensor notch or slit; Eclipse’s guide offers a dedicated large-sensor option. Measuring the mirror and camera footprint first saves a return.

Sources

Scroll to Top