How to Measure Your Head for a Straw Hat | Get the Fit Right

Measure level around your head about ¾ inch above the eyebrows and just above the ears, snug but not tight, and size from that maker’s own chart.

A straw hat that rides too low or squeezes at the temples almost always traces back to one number taken in the wrong place. The circumference you need is the line the hat will actually sit on — a ring that crosses the middle of the forehead, passes just above the ears, and dips under the small bony bump at the back of the skull. Get that loop right, write it down, and the size chart does the rest.

The whole job takes about two minutes and needs one piece of equipment you probably already own.

What You Need Before You Start

A flexible tailor’s measuring tape is the ideal tool, and a nonstretch one is better than a retractable metal tape that kinks. No tape in the house? A length of nonstretch string, ribbon, twine, or a shoelace works fine, paired with a ruler or yardstick to measure the marked length afterward. Skip anything elastic — yarn and stretchy cord deform when you pull them and hand you a number that’s too small.

If your tape shows both scales, record centimeters alongside inches. Centimeters make small differences easier to see, which matters when you’re landing between two sizes.

How to Measure Your Head Step by Step

Stand relaxed, clear your hair of ponytails, clips, and thick accessories you won’t wear under the hat, and run the tape in one level loop. Repeat until you get the same reading twice.

  1. Set the tape’s zero at the center of your forehead, roughly ¾ to 1 inch above the eyebrow line.
  2. Wrap it horizontally around the head, slightly above the ears and beneath the small raised bump at the back of the skull.
  3. Keep the tape level from front to back — a loop that slopes up at the back will read long.
  4. Snug it against the skin without compressing it or pulling it tight.
  5. Read or mark the point where the tape overlaps itself.
  6. Write down the circumference in inches and centimeters.
  7. Measure two or three times until two readings match. If they differ by more than ⅛ inch, redo the loop instead of averaging the numbers.
  8. Using string? Mark the overlap, lay the string flat, and measure it against a ruler.
  9. Compare your number to the size chart for that exact straw hat model.

Nike’s measuring guide uses this same placement, with the path running above the ears and below the occipital bump. When the tape overlap sits where you can read it, you’re done — the string version just adds the flatten-and-measure step.

Straw Hat Size Chart: Inches to Standard Sizes

Use this as a starting reference only, then confirm against the seller’s chart for the specific hat, because alpha labels and numeric sizes are not identical across brands.

Head Circumference Standard Hat Size Alpha Size
20–20⅞ in / 52–53 cm 6½ XS
21–21⅞ in / 54–55 cm 6⅞ S
22–22¾ in / 56–57 cm 7⅛ M
22⅞–23½ in / 58–59 cm 7⅜ L
23⅝–24¼ in / 60–61 cm 7⅝ XL
24⅜–24⅞ in / 62–63 cm 7⅞ 2X
25–25⅝ in / 64–65 cm 8⅛ 3X

These ranges come from product-page sizing, not a universal US standard, and many listings also offer “OS” or “One Size Fits Most” separately. A published example puts a 56-centimeter head at hat size 7, labeled small-to-medium on that chart — exactly why you check the maker’s own numbers. Nike’s hat sizing and measuring guide shows how the same placement maps to a chart.

Mistakes That Throw the Number Off

Most bad measurements come from a handful of small errors, and each one shifts your size by half a step or more.

  • Measuring around the crown of the head instead of the hat’s wearing line.
  • Setting the tape too low behind the ears or too high on the forehead.
  • Letting the loop slope instead of keeping it level.
  • Pulling the tape tight, which produces a hat that feels too small.
  • Using stretchy elastic, yarn, or any material that deforms.
  • Measuring once and trusting the first reading.
  • Measuring over thick hair or a style you won’t wear with the hat.
  • Buying from a generic chart without checking the manufacturer’s.
  • Treating a borderline number as exact when the hat only comes in discrete sizes.

If self-measuring is awkward, have someone help and run the loop two or three times.

What the Tape Doesn’t Tell You

Circumference predicts a size but says nothing about head shape, crown depth, sweatband thickness, or whether the straw body is rigid or flexible. An adjustable sweatband or drawcord can absorb a range; a fixed-size, structured straw hat needs a closer match.

When you land between sizes, follow the maker’s instructions. The Alfred University Environmental Health and Safety guide recommends choosing the larger size when you’re between sizes, though that’s general sizing advice rather than a straw-hat rule. Once your number is set, browsing tested western straw hat picks is easier — you’ll know the size to order before you start comparing. Sizing, return, and adjustment policies vary by seller, so check them before you buy.

Common Questions

Should the tape go above or below my ears?

Slightly above the ears, and level with the forehead line about ¾ to 1 inch over the eyebrows. That loop matches where a straw hat’s sweatband actually rests, which is why it gives a usable number. Tape that drops below the ears reads short and points you toward a hat that pinches.

What if my measurement falls between two sizes?

Check the manufacturer’s chart first, since some brands cut hats to fit a range. General sizing guidance from Alfred University’s Environmental Health and Safety office favors the larger size when you’re between sizes, but a fixed, structured straw hat may behave differently from that default. A hat with an adjustable sweatband or drawcord gives you more room to split the difference.

Can I use a regular metal tape measure?

You can, but a flexible cloth tailor’s tape is far easier to keep level around a curved head. A stiff metal tape tends to kink at the corners and slip out of position. If the only tape you have is metal, wrap a shoelace or piece of ribbon first, mark the overlap, then lay it flat against a ruler.

Sources

Scroll to Top