9 Best Water Pump for Washing Machine | 45L/Min Beats A Bucket

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A washer full of standing water usually means one cheap part failed, not a dead machine — and swapping that part yourself is the whole job. The pump that pushes dirty water out of the drum is a small motor-and-impeller unit, and you reach it from underneath or behind most front loaders. Below you get nine replacement pumps matched to LG, Kenmore, Samsung, Whirlpool and Maytag washers, sorted so you can find your model number and buy with confidence.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Fit comes first: check your washer’s model plate, then match it to the compatibility lists here. Every pick below is judged on the two numbers that empty a drum fast: 3600 RPM and 45 liters per minute. Use it to match your model plate to the right drain pump in one pass.

Top Picks

OEM 4681EA2001T Washer Drain Pump Motor for Kenmore & LG
Best OverallOEM 4681EA2001T Washer Drain Pump Motor for Kenmore & LG4.5+★850+ ratingsThe OEM-labeled 4681EA2001T that clears the OE code on LG and Kenmore front loaders This is the part most LG and Kenmore owners end up buying, and the crowd backs it — 4.5+ stars across 800+ owners.Check price on Amazon
Puxyblue 4681EA2001T ASKOLL Washer Drain Pump
Tightest FitPuxyblue 4681EA2001T ASKOLL Washer Drain Pump4.5+★550+ ratingsThe compact ASKOLL-branded swap that slips into a cramped cabinet without a fight If your LG’s under-drum space is tight, this one is easier to maneuver than the Techecook above.Check price on Amazon
AMI PARTS 4681EA2001T Washer Drain Pump Assembly
Deep CompatibilityAMI PARTS 4681EA2001T Washer Drain Pump Assembly4.0+★900+ ratingsThe 4681EA2001T with the longest LG and Kenmore model list of the three Where the Puxyblue keeps its list short, this AMI PARTS unit goes wide.Check price on Amazon

How To Choose The Best Water Pump for Washing Machine

You are not shopping for a better pump — you are shopping for the right pump. Every part here does the same physical job: spin an impeller fast enough to throw water out of the drum and up the drain hose. The difference between a five-minute fix and a second failure is whether the case, the connectors and the mounting holes match your machine exactly.

Match the model number before you read anything else

Pull the model plate off your washer — usually inside the door frame or behind the lower panel — and compare it to the compatibility list on the part. The LG-family pumps here cover WM and 796 series machines, while the Samsung-family pumps cover WA4, WA5, WF2, WF3, WF4 and WF5 series. A Whirlpool or Maytag cabinet takes a completely different housing with its own filter assembly. Order the wrong family and no amount of force will make the hoses line up.

Flow rate and rated head decide how fast the drum empties

Flow rate is the volume of water the pump moves in a minute, and 45 liters per minute is the ceiling shared by most of the pumps on this list. Rated head is how high the pump can push water, and 1.5 meters covers a typical standpipe or a shallow utility sink. If your drain hose climbs higher than that, the pump will struggle and your machine will throw a drain fault code at the end of the cycle.

Wattage, voltage and speed tell you it matches your machine

A drain pump that reads 120V, 60Hz and 85W is built for North American washers in the LG and Kenmore family; the Samsung-family pumps run at 80W. Those figures are not upgrade targets — they describe which control board expects this motor. Speed is quoted around 3600 RPM on the LG-style pumps, and that spin is what generates the suction that pulls water from the drum.

How long the part lasts and what protects you

These pumps sit in a wet, lint-filled environment, so durability is the honest gray area in this category. Warranty terms vary wildly across the list — from 365 days on several parts up to a claimed lifetime coverage on one Samsung replacement. Read that line before you buy, because it is the only real protection you get on a part this inexpensive.

Side-by-Side Comparison

Model Best For Flow Rate Power Fit Family Amazon
Techecook 4681EA2001T OEM★ Best Overall LG and Kenmore front loaders 45 L/min 85W, 120V-127V, 60Hz LG / Kenmore WM and 796 series Amazon
Puxyblue 4681EA2001T ASKOLLTightest Fit Tight under-washer installs 4.5 L/min 85W, 120V-170V AC, 60Hz LG / Kenmore front loaders Amazon
AMI PARTS 4681EA2001TDeep Compatibility Long compatibility list 45 L/min 85W, 120V-127V, 60Hz LG / Kenmore front loaders Amazon
Techecook DC31-00054D Samsung front and top loaders — 80W, 120V, 60Hz Samsung WA4 / WA5 / WF2-WF5 Amazon
TOMOON DC31-00178A Wire-guard protected Samsung swap — 80W, 120V, 60Hz Samsung front loaders Amazon
Beaquicy DC31-00054D No-special-tools Samsung repair — 80W, 120V, 60Hz Samsung WA4 / WA5 / WF2-WF5 Amazon
TOMOON 4681EA2001T Big LG models like WM8000HVA 45 L/min 85W, 120V-127V, 60Hz LG / Kenmore, including WM8000HVA Amazon
Beaquicy WPW10730972 Whirlpool Duet / Maytag / Amana — 80W, AC 120V, 60Hz Whirlpool, Kenmore, Amana, Inglis, Maytag Amazon
AMI PARTS 280187 8181684 Whirlpool front loaders 45 L/min 85W, 110V-127V, 60Hz Kenmore, Whirlpool, Maytag, KitchenAid Amazon

Detailed Reviews

★ Best Overall

1. OEM 4681EA2001T Washer Drain Pump Motor for Kenmore & LG

Our pick — 4.5+★ from 850+ verified ratings; the strongest balance of quality and price.

45L/Min FlowRemovable Filter Housing

The OEM-labeled 4681EA2001T that clears the OE code on LG and Kenmore front loaders

This is the part most LG and Kenmore owners end up buying, and the crowd backs it — 4.5+ stars across 800+ owners. It is a motor and impeller built as one integrated assembly, spinning at 3600 RPM and moving 45 liters per minute. In plain terms, that is enough suction to empty a loaded drum quickly instead of letting water pool around the clothes.

What wins people over is that it just works: no fiddling, no half-drains, no repeat fault lights. The rated head of about 1.5 meters is the number that matters if your drain hose feeds a standpipe, since the pump has to lift water that high every cycle. A removable filter housing means you can pull the lint trap and clean it without dismantling the pump again. Adding the sealing ring in the design keeps the whole unit running smoother and quieter than a tired original.

It also carries a 365-day guarantee, which is the practical safety net on a part this cheap. The honest catch is durability — a small share of these pumps give out earlier than the original did. Clean the drain filter before you install the new one, as the maker advises, because a clogged filter is what kills a fresh pump. The core work here is the drainage job itself: forcing wastewater and foam out through the drain pipe at every wash, rinse and spin stage so nothing sits and turns musty.

Why This One Leads The Pack

  • 45 L/min flow rate clears a full drum fast, so cycles finish on time
  • 3600 RPM motor and impeller come as one integrated unit with a removable filter housing
  • Genuine OEM labeling on the box, plus a 365-day guarantee
  • Rated head of about 1.5m handles a standard standpipe drain

Where It Can Disappoint

  • Long-term durability is the recurring gripe — some units quit sooner than expected
  • Requires basic tools and a filter clean-out before the swap

Straight answer: If your LG or Kenmore front loader is leaving water in the drum or throwing an OE code, this is the pump to order first.

Clean it first: Clear the old drain filter before installing, or the new pump inherits the same clog.

Tightest Fit

2. Puxyblue 4681EA2001T ASKOLL Washer Drain Pump

ASKOLL BrandSealing Ring Included

The compact ASKOLL-branded swap that slips into a cramped cabinet without a fight

If your LG’s under-drum space is tight, this one is easier to maneuver than the Techecook above. It measures 3.9″L x 2″W x 3″H and weighs 1.3 pounds, against the Techecook’s 2″L x 3.1″W x 3.8″H and 1.5 pounds. That spread matters when you are reaching up from the floor with one hand and trying to line up screws you can barely see.

The ASKOLL branding is the point here. Owners of LG machines have learned that a generic motor can fit but not last, and this pump is sold under the name that matches what came in the washer from the factory. Adding a sealing ring lets it run at the same noise level as the original, so your laundry room doesn’t gain a new hum. Wattage is 85W at 1.4A and 60Hz, with a quoted speed of 3600 r/min, which is the same working profile the factory part used.

The genuine-label reasoning aside, durability is the honest question mark on this one — a portion of buyers report a failure inside the first year. Warranty coverage runs a year, so keep your order record. Its compatibility list is narrower than some rivals, so confirm your exact model before you buy, and the fit is the reason to choose it — an exact-size replacement beats a cheaper part that needs convincing to seat.

Real strength: A true ASKOLL-branded pump, sized at 3.9″L x 2″W x 3″H and 1.3 pounds, so it works into tight spaces and matches the factory fit on LG front loaders.

Buyer beware moment: A one-year durability window is the recurring note — if your washer runs daily and heavy, weigh that against pumps with longer coverage.

Choose this one: Reach for this if you want the brand that matches the original and your under-washer space is cramped.

Second thought: If longevity matters more than the label, a pump with longer warranty coverage might suit you better.

Deep Compatibility

3. AMI PARTS 4681EA2001T Washer Drain Pump Assembly

45L/Min Flow365-Day QA

The 4681EA2001T with the longest LG and Kenmore model list of the three

Where the Puxyblue keeps its list short, this AMI PARTS unit goes wide. It replaces AP5328388, PS3579318 and 4681EA1007G, and names models from WM2010CW and WM2016CW through WM3600HVA and WM3670HWA. For someone staring at a model plate with a string of letters and digits, that long list is the difference between buying once and buying twice.

The working numbers are the same family standard: 120V-127V, 60Hz, 85W and 1.4A, with 45 liters per minute of flow. That flow rate is what makes short work of a drum full of soapy water, and it is the number to compare against any competing pump. It arrives with the gasket included, and a 365-day QA window backs it up. Basic hand tools are enough to do the swap, and the manufacturer offers to confirm your model if you send the number over first.

Here is the shape of the risk: durability is the honest weak spot, with a share of these units failing inside nine months. Weigh that against the compatibility reach, because for a lot of oddball Kenmore model numbers this is one of the only exact matches on the shelf. Its quiet operation and factory-original match are the two things owners tend to notice right away, and the fit is why this part earns the position.

The case for it: A sprawling compatibility list covering WM2010CW through WM3670HWA, plus 45 L/min flow and a 365-day QA guarantee, makes this the safest order for an unusual LG or Kenmore number.

What to keep in mind: Some units give up inside nine months, so this buys fit certainty rather than long service life.

Best matched to: Owners whose washer model doesn’t appear on shorter compatibility lists, where getting the right fit matters most.

Temper your hope: Expect a good first year, and keep the warranty paperwork handy in case it lets you down early.

Samsung Specialist

4. Techecook DC31-00054D PX3516-01 Samsung Washer Drain Pump

80W MotorLifetime Warranty

The Samsung DC31-00054D pump with the longest warranty claim on this list

Samsung washers live on a different motor profile — 80W at 120V and 60Hz rather than the 85W LG-family figure — so nothing from the LG group will drop in. This unit covers front-load and top-load machines across the WA4, WA5, WF2, WF3, WF4 and WF5 series. It mounts at the back of the washer and pulls dirty water out during the circulating drain section, so it addresses the same slow-drain and no-drain symptoms the LG pumps do.

The standout promise is the claimed lifetime warranty, which is far beyond the 365-day terms most of this list carries. That single line changes the risk math if you run your washer hard. Installation takes a Phillips head screwdriver and channel locks, and you can find a repair walkthrough online rather than guessing at the wiring. Just note which connector plugs into which terminal before you pull the old pump, because that is the step people get wrong.

On durability the picture is genuinely split — plenty of these are still running long after install, and a smaller group report an early failure around the four-month mark. Warranty is the answer to that risk, so register the purchase. Its an exact-replacement fit and a solid 4.5+ star standing make it a sensible pick for a Samsung owner who wants the paperwork side covered.

The Clincher

  • Claimed lifetime warranty is the strongest coverage on this entire list
  • Fits Samsung WA4, WA5, WF2, WF3, WF4 and WF5 series front and top loaders
  • Correct 80W, 120V, 60Hz profile for Samsung control boards

The Fine Print

  • Early failures happen to a minority — the warranty is what you rely on
  • Requires channel locks and careful wire routing during install

Pick this if: You own a Samsung in the WA or WF series and want the longest protection window you can get.

Note before ordering: Photograph the wire orientation on your old pump, because a swapped connector will stop the new one dead.

Wire Guard

5. TOMOON DC31-00178A DC31-00187A PX3516-01 Washer Drain Pump

New Wire Guard2-Year Warranty

The Samsung PX3516-01 pump with an added wire guard to protect the wiring during install

This upgrade version adds a new wire guard design to the PX3516-01 body, and that detail targets the most common installation mishap: a wire catching on the washer’s sharp metal edge as you slide the pump into place. It runs the same 120V, 60Hz, 80W profile as the other Samsung parts, so the electrical match is a given if your machine is in the right family.

It swaps into DC31-00178A, DC31-00187A, DC31-00178D and a stack of cross-reference numbers including AP5916591, PS9605762 and PX3516-01. The symptom list is the familiar one: noise, refusing to drain, slow drainage, leaks, a pump that turns but doesn’t spin, soggy clothes and the 5E, SE or Sud error codes. If any of those describe your Samsung, the pump is the first thing to check.

The build is metal and plastic with a 2-year warranty backing it, and buyers rate it well for how quietly it works and how well it fits. Installation is straightforward with basic tools and simple instructions. The one thing to watch is that its compatible-model list leans toward specific WF and WA codes rather than every Samsung ever made, so verify your plate. A 4.5+ star standing across 800+ owners makes it one of the better-supported Samsung options here.

Why it earns a slot: The added wire guard protects the connection during install, and a 2-year warranty covers a part that slots into a long list of Samsung model codes.

What to verify: Its compatibility list is specific rather than universal — check your exact model code before you commit.

Right for: Samsung owners who want a guarded wire path and a two-year safety net behind the part.

Check first: Confirm your washer’s exact model code appears on the cross-reference list.

Fastest Swap

6. Beaquicy DC31-00054D PX3516-01 Samsung Washer Drain Pump

No Special Tools2-Year Return

A Samsung DC31-00054D swap that needs only a Phillips screwdriver and slot locks

Beaquicy designed this one to be the least fussy swap on the Samsung side. The tools required are a Phillips screwdriver and slot locks, and the procedure is a short loop: pull the plastic cover off the filter, undo the two screws behind it, disconnect the hoses, and drop the old pump out the bottom. Photograph the orientation of the pump and wiring first, because that is the one moment where a fast job turns into a slow one.

Power is 120V at 60Hz and 80W, matching what Samsung boards expect, and the impeller comes pre-lubricated with oil so it runs quietly and smoothly from the first load. It’s compatible with the WA4, WA5, WF2, WF3, WF4 and WF5 series and replaces part numbers including 2754406, AP5583541 and PS4204640. The list also covers specific codes like WF461ABW/XAA and WA400PJHDWR/AA-01.

Where this one earns its place is simplicity — no special tools, no disassembly of the washer front. The fit is direct for most Samsung front loaders, and buyers describe it as working flawlessly once seated. It’s covered by a 2-year return and exchange policy, which is generous for a part in this range. The 4.5+ star standing and 600+ owners behind it round out the case.

Best reason to buy: The whole job needs only a Phillips screwdriver and slot locks, and the 2-year return window covers you if the part misbehaves.

Slow down here: Snap a photo of the hose and wire layout before you pull the old pump, so the new one goes back in the same orientation.

Ideal owner: A Samsung owner with basic tools who wants the swap done in one sitting without tearing the machine apart.

Earn the speed: The five-minute install only holds if you photograph the wiring first.

Big LG Coverage

7. TOMOON 4681EA2001T WM8000HVA WM8100HVA LG Washer Drain Pump

45L/Min Flow2-Year Warranty

Sized for big LG drums, naming the WM8000HVA and WM8100HVA on its fit list

Own a big-capacity LG and the model code on your plate is probably not on a general list. This pump calls out WM8000HVA, WM8100HVA, WM3270CW and WM3431HS by name, and carries the same 85W, 120V-127V, 1.4A profile as the other LG-family parts. It also has the original ASKOLL logo on the side, which is the marking LG owners use to tell a faithful copy from a loose one.

The spec sheet reads 45 liters per minute at 3600 r/min, and a 45L/Min figure is what empties a large drum without leaving a puddle sitting around your clothes. The pump arrives as a complete motor and impeller assembly with a removable filter housing, so cleaning lint out later takes seconds. Replaces 4681EA1007G, 4681EA1007D, 4681EA2001D and a long tail of cross-reference numbers including PS3579318 and AH3579318.

The honest part: durability is where this one draws criticism, and a 2-year warranty is the main answer to that. Its ease of replacement and build quality get mixed comments across the board, so go in knowing it’s a repair part and not a permanent cure for an aging washer. For a WM8000HVA or WM8100HVA owner who can’t find a match elsewhere, this is the targeted fit that saves calling out a technician.

Where It Shines

  • Names the big LG machines — WM8000HVA, WM8100HVA, WM3270CW, WM3431HS — in its fit list
  • Original ASKOLL logo on the housing, plus 45 L/min flow at 3600 r/min
  • 2-year warranty gives you a fallback if it fails

What You Give Up

  • Durability draws complaints — treat it as a wearable repair part
  • Leave the power wire arrangement noted before you unplug, or reinstall goes sideways

Built for: Big-drum LG owners whose model code appears on no general compatibility list.

Don’t forget: Note how the power wires sit before you remove the old pump — the 2-year warranty doesn’t cover a reversed connection.

Whirlpool Family

8. Beaquicy WPW10730972 Washer Drain Pump Assembly

Full Housing Assembly365-Day Guarantee

The complete housing, filter and motor in one box for Duet and Maytag owners

Whirlpool-family washers don’t take a bare motor — they take a pump assembly, and this box includes the motor, the pump housing and the filter together. The filter housing and motor are firmly attached to each other to head off the leaks that a loose two-piece setup can allow. Rated AC 120V, 60Hz at 80W, it’s built from ABS plastic and metal to resist cracking during the install.

Fit is the reason to look here. It covers Whirlpool, Kenmore, Amana, Inglis and Maytag machines, naming models like the Maytag MHWE900VW01, the Whirlpool WFW9550WR00 and the Kenmore 11047701800. It replaces WPW10730972, 850024, W10130913, W10117829 and a long list of related numbers. It also clears the F21, F33, SD and F02 error codes that show up when a Duet-style washer won’t drain.

The tools are ordinary: a 1/4 inch nut driver, a 5/16 nut driver, a flat blade screwdriver and pliers. A 365-day guarantee covers quality problems, and the assembly design means the filter comes as part of the unit rather than a separate piece to re-seat. One real caution — some units leak at the housing seam, so check the fit of every connection before you push the washer back. It’s a 4.5+ star part with 600+ owners behind it, and the whole-assembly package is the reason to pick it.

Most important detail: The motor, housing and filter come as one assembly at 120V and 60Hz, so a Duet-style machine gets a complete replacement rather than three parts to juggle.

Watch the seam: Leaks at the housing are the recurring complaint — inspect every joint after you button it up.

Best suited to: Whirlpool Duet, Maytag, Amana and Kenmore owners who need the full housing and filter, not just a motor.

Post-install check: Run a short cycle and look for moisture at the housing seam before you slide the washer home.

Proven Reliability

9. AMI PARTS 280187 Washer Drain Pump Motor

45L/Min Flow1.5m Rated Head

The pump Whirlpool front-loader owners count on when the drum won’t empty

This is the classic 280187 replacement, and the 45 L/min flow with a 1.5-meter rated head is what makes it dependable on a standard drain setup. It runs on 110V-127V at 60Hz and 85W with 1.4A, close enough to the LG-family working numbers that Whirlpool washers in this range happily accept it. It replaces 285998, 8181684, 8182819, 8182821 and 1200164.

For a front loader with water sitting in the drum, the symptom list here is familiar: no drainage, leakage from the unit, a drum that won’t spin, or a loud racket on the drain cycle. A 3-screw process is how most of these go in, so the job is short if you have a driver and a little patience. Compatibility stretches across Kenmore, Whirlpool, Maytag and KitchenAid, so the odds are good your machine is on it.

Reliability is what buyers praise most, which is the property you actually want from a drain part, and the simple install is the second point in its favor. It carries a 1-year manufacturer warranty. Durability is genuinely mixed, though — some run for two years while others give out around the one-year mark. If your washer is older and you’re chasing a persistent leak, this fits the job, but treat it as a wear part rather than a permanent fix.

Strongest point: Reliability is what it’s known for, backed by 45 L/min flow and a 1.5m lift that fits standard standpipe drains.

Fair warning: Service life varies — some units last two years and some fail closer to one, so the 1-year warranty is your realistic guardrail.

For the Whirlpool owner: A smart match for Whirlpool, Maytag, Kenmore and KitchenAid front loaders throwing drain faults.

One caveat: Budget for a replacement eventually — this is a repair, not a lifetime part.

Know the Specs

Flow Rate (L/min)

Flow rate is how many liters of water the pump pushes out per minute, and 45 L/min is the figure most of these parts advertise. Higher flow means the drum empties faster at the end of the cycle, so the washer moves on to the spin without sitting in a puddle. A lower number, like the 4.5 L/min listed on one pump here, would suggest a much slower drain — the kind that leaves your clothes sitting wet longer.

Rated Head (meters)

Rated head is the height the pump can push water, and 1.5 meters is the common figure on this list. If your drain hose climbs to a standpipe or over a utility sink within that range, the pump handles it. If your setup needs more lift than the pump is rated for, the water backs up and the machine throws a drain error code — so check this against your actual drain height before you buy.

Wattage and Voltage (W, V, Hz)

Wattage describes the motor’s power draw, and most LG-family pumps here read 85W while the Samsung-family ones read 80W. Voltage at 120V and 60Hz is what North American washers expect. These numbers don’t make one pump “better” — they tell you which control board and wiring harness the pump was built for. A mismatched wattage is a sign you’re looking at the wrong model family entirely.

Speed (RPM) and Impeller Design

Speed is how fast the motor turns, and a number like 3600 RPM is what generates the suction that pulls water from the drum. The impeller is the rotating blade inside the pump that actually moves the water, and it’s often built into the motor assembly rather than sold separately. A removable filter housing next to the impeller lets you clear lint without taking the whole pump apart, which extends the life of the part.

Common Questions

How do I know which drain pump fits my washer?
Find your washer’s model plate — often inside the door frame or behind the lower panel — and match the code to the compatibility list on the pump. LG and Kenmore front loaders use the 4681EA2001T family, while Samsung WA and WF series washers use the DC31-00054D or PX3516-01 family. Whirlpool and Maytag machines take a WPW10730972 or 280187 style assembly. If your code isn’t listed, contact the seller with your model number before ordering.
Will a 4681EA2001T pump work in my Kenmore washer?
If your Kenmore is built on the LG platform — most 796-series models are — then yes, the 4681EA2001T is the right family. These pumps replace AP5328388, PS3579318 and 4681EA1007G, and they cover 79640021900, 79640272800, 79641028900 and similar codes. Confirm the exact number on your plate against the listing’s model list before you buy.
How long does a washing machine drain pump usually last?
Durability varies more than any other spec on these parts, and that’s the honest weak spot across the category. Some units run for years, others fail inside a year — which is why warranty coverage matters so much. The warranty terms here range from 365 days on several pumps to a 2-year policy on some Samsung replacements and a claimed lifetime warranty on one. Keep your purchase record with the part.
What does an OE or DE error code mean on an LG washer?
Those codes usually mean the washer can’t drain properly, and a failing pump is a common cause. The pump’s job is forcing wastewater and foam out through the drain pipe at every wash, rinse and spin stage. When it weakens, water stays in the drum and the machine flags the fault. Check the drain filter for a clog first, then replace the pump if the code returns.
Can I replace a washer drain pump myself?
Yes, and it’s one of the more approachable appliance repairs. Disconnect the power and water supply first. On most LG-style machines you remove the drain cover, disconnect the wiring harness and the two hoses, loosen the two screws on the tilted back leg, and swap the pump. On Samsung machines you often lay the washer on its side, remove the pump from the bottom, and reinstall. Basic tools like a Phillips screwdriver, pliers and a flat-blade screwdriver are enough for most of these.
Why is my new drain pump making noise or leaking?
Noise often comes from a loose seating or the pump not sitting flush against its mount, so recheck the screws and the filter housing connection. Leaks usually trace to a hose clamp that isn’t tight or a gasket that pinched during install. On the Whirlpool-style assembly, check every joint at the housing seam before you slide the washer back. If the pump itself hums without draining, the impeller may be jammed by lint — clean the filter first.
Is the ASKOLL version better than a generic drain pump?
The ASKOLL name is what LG used on the original factory pump, so an ASKOLL-branded replacement is a closer match to what your washer came with. Whether it lasts longer than a generic copy is the real question, and durability reports are mixed across every pump in this category, ASKOLL-branded or not. The advantage is fit and noise level — a pump built to the original profile tends to drop in and run at the same sound level.
What water pressure does a washing machine drain pump need?
A drain pump doesn’t rely on household water pressure — it creates its own push with the impeller, which is why the flow rate and rated head figures matter. Flow rate is the liters per minute the pump moves, and rated head is the height it can lift that water, commonly 1.5 meters on these parts. If your drain hose rises higher than the rated head, the pump will struggle no matter how good it is.
Do I need to clean the pump filter before installing a new pump?
Yes, and it’s the step most people skip. A clogged filter causes the new pump to strain from the first cycle, and the manufacturer for the Best Overall pick specifically advises cleaning the drain filter before installation to avoid clogging and deformation of the new part. On a Whirlpool-style assembly, the filter comes integrated with the housing, so it’s already clean when the new unit goes in.
Can a drain pump fix slow drainage as well as no drainage at all?
Both symptoms often trace back to the same part. A worn impeller or a motor that’s losing speed can slow drainage without fully stopping it, and a completely dead pump leaves standing water. The pumps here list both slow drainage and failure to drain among the symptoms they address, along with leaks, odd noises and wet clothes at the end of the cycle. If the filter is clear and water still lingers, the pump is the first thing to replace.

The Bottom Line

For most LG and Kenmore front loader owners, the Techecook OEM 4681EA2001T is the pump to grab — 45 L/min flow,3600 RPM speed, a removable filter housing, and the 4.5+ star standing that makes it the crowd favorite here. If your washer is a Samsung and you want the tightest compatibility net, the Techecook DC31-00054D carries a claimed lifetime warranty that no other pump on this list matches. And if you own a Whirlpool Duet or Maytag, the Beaquicy WPW10730972 ships as a complete motor, housing and filter assembly, so you replace the whole leak-prone unit in one go. Whichever fits your plate, check the model number twice and clean the drain filter once — that pair of habits is what makes this repair stick.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top