The right transfer tank is the smallest one that supplies your needed range or workday while measuring inside your bed and staying under the truck’s payload and axle limits.
Buying by gallons alone is how people end up with a tank that won’t clear the wheel wells — or a rear axle carrying more weight than the tires allow. Fuel weighs roughly 7 pounds per gallon for diesel and about 6 for gasoline, so a full 100-gallon tank adds around 700 pounds before the tank itself, the pump, and your tools get counted. In sizing a transfer tank, the number on the box is the last thing to check, not the first.
How Much Fuel Capacity Do You Actually Need?
Start with the job the tank has to do. A long-haul tow or a full day of equipment running sets a fuel target; the tank just has to cover the gap between your truck’s stock range and that target. A crew that fuels skid steers on-site needs enough for the day’s machines, not the maximum the bed can hold.
Once you know the fuel figure, work backward:
- Estimate your typical daily or per-trip fuel draw.
- Add a modest reserve rather than filling the bed to the roof.
- Pick the smallest capacity that covers the reserve comfortably.
Bigger tanks cost more, weigh more empty, and eat bed space you may need. A 50-gallon diesel refueling tank, for example, measures 54 inches long, 15.5 inches wide, and 23.5 inches tall — a footprint that leaves room for cargo in most 6.5-foot and 8-foot beds.
Measure Your Bed Before You Compare Models
Advertised bed length is not usable bed space. Measure the real thing: floor length from the bulkhead to the tailgate, the narrowest width between the wheel wells, rail height, and the clearance under any tonneau cover or toolbox.
“Short bed” and “long bed” labels don’t translate consistently between makes and years, so match your tape measure against the manufacturer’s exact model dimensions instead. Then check the things that interfere:
- Fifth-wheel or gooseneck prep packages. Transfer Flow notes its 100-gallon L-shaped tank won’t fit the 2013–2024 Ram short bed with the 5th Wheel Prep Package.
- Bed liners, tie-down points, and tailgate clearance.
- Toolbox or cover clearance overhead.
A 113-gallon L-shaped diesel tank, for instance, runs 49.5 inches by 40.5 inches and is 29 inches tall — it’s listed for long and short beds on full-size trucks, but that height changes what fits above it.
Do the Load Math Against Your Payload Rating
This step sinks more buyers than dimensions do. Take the tank’s shipping weight, add the full fuel load, then add the pump, hoses, mounting hardware, tools, passengers, and everything else in the truck.
Here’s how the numbers stack up on a sample of current models:
| Tank Model | Capacity & Weight | Key Fit Note |
|---|---|---|
| 50-Gallon Diesel Refueling Tank | 50 gal; 140 lb shipping | Diesel only; pump sold separately |
| 40-Gallon Tank & Tool Box Combo | 40 gal; 215 lb shipping | Fits most tonneau covers; diesel, gas, kerosene |
| 82-Gallon Refueling System | 82 gal; 251 lb shipping | All full-size trucks; includes 12V GPI pump and hose |
| 100-Gallon L-Shaped System | 100 gal; 329 lb shipping | Long-bed application; diesel, gas, kerosene |
| 113-Gallon L-Shaped Diesel Tank | 113 gal; 355 lb shipping | Full-size trucks; pump sold separately |
| 50/50 Split Dual-Tank System | 100 gal total; 332 lb shipping | Two 50-gal tanks, two GPI pumps, two hoses |
| In-Bed Auxiliary Tanks | 37 to 100 gal | Priced $2,146–$2,601; separate product line from refueling tanks |
Compare that running total against your truck’s payload rating and confirm the axle and tire limits too. Transfer Flow’s refueling tank systems list shipping weight on every model, which is the honest starting point — but it is empty-tank weight, not the weight of a full tank rolling down the highway.
One more distinction matters before you buy: a refueling tank and an auxiliary tank are not the same thing. A pump-equipped refueling system lets you fill equipment on site. An auxiliary tank gravity-feeds or pumps into the truck’s own fuel system, and that requires manufacturer approval and the right installation parts — never assume the swap is automatic.
If you’d rather start from tanks that already include a pump rather than piece one together, this roundup of tested transfer tanks with pumps is a practical next stop.
Which Fuel Types and Extras Change the Decision?
Fuel type narrows the field fast. Some diesel tanks are diesel-only — the 50-gallon model above is one of them — so buying a gasoline-capable system only helps if the tank itself accepts gasoline. Transfer Flow’s 40-gallon combo, 82-gallon, and 100-gallon systems list diesel, gasoline, and kerosene support.
Then sort out what’s included. Transfer Flow sells several tanks with the pump separate, including the 50-gallon diesel and 113-gallon diesel models, while the 82-gallon system ships with a 12-volt GPI pump, 12-foot hose, nozzle, cab-mounted switch, and mounting hardware. Factor that into the price you’re comparing.
Finally, read the installation instructions before ordering. Mounting, electrical connections for the pump, venting, fuel-type confirmation, and cover or toolbox clearance all get spelled out per model — and getting them wrong is the difference between a tank that works and one you can’t legally or safely run.
Common Questions
How much does a full tank add to my truck’s load?
Fuel weighs about 7 pounds per gallon for diesel and roughly 6 for gasoline, so a 100-gallon tank adds around 700 pounds when full — before the tank, pump, or tools. Add that figure to the tank’s listed shipping weight, then compare the total against your payload rating and axle limits.
Can I install a transfer tank under a tonneau cover?
Some models are built for it. Transfer Flow describes its 40-gallon refueling tank as fitting under most tonneau covers, but cover height and tank dimensions vary. Measure the clearance underneath your cover and match it to the manufacturer’s listed height before ordering.
Is an auxiliary tank the same as a refueling tank?
No. A refueling tank with a pump fills equipment or vehicles on site, while an auxiliary tank connects to the truck’s own fuel system to extend driving range. That connection requires manufacturer approval and specific installation components, so treat them as separate purchases with separate requirements.
Sources
- Transfer Flow. “Refueling Tank Systems” Lists capacities, dimensions, shipping weights, fit notes, included components, and prices for refueling tank models.
- Transfer Flow. “In-Bed Auxiliary Fuel Tanks” Provides the auxiliary tank size range and current price spread.
- Transfer Flow. “Diesel Refueling Tanks” Details diesel-only models, including the 50-gallon and 113-gallon tanks with pumps sold separately.