4 Best Whirlpool WDT730HAMZ Parts | Fix the Rack Before It Warps

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your Whirlpool WDT730HAMZ dishwasher has a top rack that sags, a bottom rack that won’t roll, or wheels that keep popping off, you do not need a new dishwasher — you need the right replacement rack parts. This guide covers the handful of parts that actually fit your exact model, so you can buy once and get back to clean dishes. The short answer: match the part number to your model first, then buy.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

The right parts get your racks sliding smooth again and your dishes sitting level — and this breakdown of the whirlpool wdt730hamz parts that genuinely fit makes the swap simple.

Top Picks

Funmit W10350375 Dishwasher Top Rack Adjuster Kit
Best OverallFunmit W10350375 Dishwasher Top Rack Adjuster Kit4.5+★750+ ratingsTen spare parts in one box, priced to fix the whole upper rack in a single order.Check price on Amazon

How To Choose The Best Whirlpool WDT730HAMZ Parts

Buying a dishwasher part is a fitment job first and a quality job second. If the part number does not match what your WDT730HAMZ uses, nothing else matters — the piece simply will not seat. Get the number right, then judge the material.

Start With Your Part Number, Not the Brand on the Listing

Every rack piece on these dishwashers carries a factory code. The top rack adjuster, for example, is commonly listed as W10350375 and it cross-references a stack of alternate codes. The bottom rack is listed as W10728159 and swaps in for a long run of other numbers. Write down the code on your broken part, or find the cross-reference list on the listing, and confirm your model appears there. A listing that says it fits Whirlpool broadly is not the same as one that names your model.

Match the Failure to the Part You Buy

A sagging or dropped top rack usually means the adjuster or its wheels have worn out. A bottom rack that grinds, won’t slide, or has flaking coating points to the rack itself. Buying a full upper rack adjuster kit when you only need a clip wastes money, but buying a clip when the wheel housing is cracked means a second order and more waiting.

Material Decides How Long the Fix Lasts

Plastic adjusters and clips flex and can crack under heat over time. A stainless steel rack body resists rust and high-temperature steam far better than a coated one, because there is no coating to peel. If you are replacing the whole bottom rack, the material grade is the single biggest factor in how long the replacement holds up.

Side-by-Side Comparison

Model Best For Part Type Material What’s Included Amazon
Funmit W10350375 Top Rack Adjuster Kit★ Best Overall Worn or sagging top rack Upper rack adjuster kit ABS 10 pieces (2 of each of 5 parts) Amazon
S-Union W10728159 Lower Rack Cracked or rusted bottom rack Lower rack with wheels 304 stainless steel 1 rack + 4 wheels Amazon
POOLKEY W10728159 Lower Rack Complete bottom rack rebuild Lower rack with wheels 304 stainless steel 1 rack + 4 wheels Amazon
FrameFirm W10728159 Lower Rack Rust-free long-term swap Lower rack with wheels Nylon and 304 stainless steel Rack assembly Amazon

Detailed Reviews

★ Best Overall

1. Funmit W10350375 Dishwasher Top Rack Adjuster Kit

Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.

10-Piece KitABS Construction

Ten spare parts in one box, priced to fix the whole upper rack in a single order.

You get 10 pieces here, not one: two W10350375 top rack adjusters, two W10195840 positioners, two W10195839 rack adjusters, two W10250160 arm clip-locks, and two W10508950 dishrack stops. That matters because a dropped rack is rarely one broken piece — the adjuster, the clip, and the stop tend to wear together. One order covers the whole repair instead of three.

The 4.5+ star consensus across 750+ ratings is built on the fix actually working. Adjuster kits like this earn their keep on one question: does the rack sit level and slide again? What wins people over here is that it does, and it fits the listed models — WDT730PAHZ0, WDT970SAHZ0, WDTA50SAHZ0, WDT750SAHZ0, and a long list of Kenmore codes. The adjuster also replaces W10712395, AP5957560, and PS10065979, so cross-referencing an old part number is straightforward.

The honesty note is durability. The plastic is ABS, upgraded and with reinforced wheels, but plastic in a hot dishwasher eventually ages. Some longer-term buyers see a piece fail again after about a year, so treat this as a repair with a finite life, not a permanent upgrade. Also: the kit ships without printed instructions, and the listing itself points you to contact support with your model if anything is unclear — so keep your phone handy and look up a photo guide before you start.

Why It Earns First Place

  • 10 pieces in one order covers adjusters, clips, and stops together
  • Fits WDT730PAHZ0 and many related models by name
  • Cross-references W10712395, AP5957560, and PS10065979
  • Reinforced wheel design is designed to stop the drop-off failure

What to Plan Around

  • ABS plastic can age in hot cycles over time
  • No printed instructions in the box

Grab this when: your upper rack has dropped, tilts, or the wheels keep falling off, and you want every wear part in one box.

Reconsider if: your bottom rack is the broken piece — this kit only handles the top rack, and you’d need a W10728159 rack instead.

Best Value

2. S-Union W10728159 Dishwasher Lower Rack

304 Stainless Steel4 Wheels Included

A whole stainless bottom rack with four wheels for less than the pricier alternatives.

This is the middle-priced way to replace a failed bottom rack, and it gets the core spec right: the rack body is 304 stainless steel, the food-grade alloy that resists rust, corrosion, and high-temperature steam. There is no coating to peel, which is the failure that usually kills the factory rack — flaking dips and exposed metal underneath. You are buying your way out of that problem entirely.

Sized at 22″ x 20.5″ x 6″, it fits lower-rack positions on KitchenAid, Kenmore, Maytag, and Whirlpool models, and it names wdt730hamz directly in its fitment list alongside wdt730pah, wdt750sak, and wdta50sak. Four wheels are in the box, and installing them into the rack slots is the whole job — no professional needed. One catch that separates it from the pricier racks: it does not include the W10728160 tine row, so you transfer your original tine row onto the new rack. That is a five-minute swap, but it is a step to plan for.

What earns it the value badge is the material at this bracket. Where the Funmit top-rack kit above is plastic, this is stainless steel built to withstand daily loading, and the toughness claim lines up with a 6.95-pound rack body with real load-bearing structure. Buyers consistently find it fits and works as a replacement. The upside is clear: a rust-free rack that should outlast the coated original — provided the tine-row transfer goes smoothly.

Bottom line on the swap: For a cracked, rusted, or deforming bottom rack, this gives you stainless steel and four fresh wheels without the top-tier price. Verify your model against the fitment list and transfer your tine row first.

The one step to note: No W10728160 tine row included, so your original tine row moves over to the new rack.

This is the sensible middle buy: a stainless lower rack that handles the everyday failures without stretching to the premium tier.

If you want nothing to transfer over: a rack that ships with its own tine row saves you that step.

Premium Pick

3. POOLKEY W10728159 W10525646 Dishwasher Bottom Rack

304 Stainless Steel1-Year Warranty

Heavier-gauge stainless, a hollow water-channel design, and the wheels cross-referenced to eight codes.

Where the S-Union rack above lists 304 stainless in general terms, this POOLKEY rack spells out what the steel buys you: rust-proof, waterproof, corrosion-resistant, and stable under high-temperature steam. It also names a specific structural choice — a hollow design that lets water pass through with no dead corners, so the spray reaches the dishes instead of being blocked by a solid rack base. That is the kind of detail that matters when your old rack had flaking coating trapping food.

The wheel spec is the standout. The included wheels cross-reference WP3376961, 3369509, 3376961, 524472, AP3044823, AH343926, EAP343926, and PS343926 — a long compatibility net that lets you match an old wheel code without guesswork. Sizing runs 22.4″ x 20.8″ x 5.9″, and the fitment list names WDT730HAMZ alongside WDT730PAHB0, WDF330PAHS, and a run of KitchenAid and Maytag codes. It is a direct lower-rack replacement with no tine-row step to worry about.

Here is where honesty earns trust: this is the least-reviewed pick of the four, and the listing is deliberate about what it is. It replaces the stainless rack body and wheels, not the adjustment hardware — your upper-rack adjusters and clips are separate parts. If your failure is a dropped top rack, none of the lower racks here will fix it. But for a bottom rack that is rusted, cracked, or deformed, the hollow water design plus the wheel cross-reference makes it the most specified option on the page.

Specs Worth the Step Up

  • Hollow rack design lets water reach every corner without dead spots
  • Wheels cross-reference 8 part codes including WP3376961
  • 304 stainless resists rust and high-temperature steam
  • 1-year warranty and full model-confirmation support
  • Fits WDT730HAMZ and WDT730PAHB0 directly

Know Before You Buy

  • Fewest reviews of the picks here, so real-world data is thin
  • Rack body and wheels only — no upper-rack hardware included

Choose this if the detail matters: the hollow water-channel design and 8-code wheel cross-reference make it the more engineered lower rack.

Look elsewhere if: your problem is a sagging top rack — this is a bottom-rack part only.

Rust-Free Pick

4. FrameFirm W10728159 Lower Rack

Nylon & StainlessLaser-Welded Seams

A mixed nylon-and-steel rack that points at one thing: never touching a rusty basket again.

FrameFirm takes a different build path from the two stainless racks above. The body combines imported nylon with 304 stainless steel, and the maker states it is built to outlast resin-coated and bare-steel racks, since there is no exposed metal to rust. If your last rack failed by peeling and rusting, that design claim is aimed squarely at that problem. It weighs in at 4 pounds, lighter than the 6.95-pound S-Union rack, which makes the slide-in install easier to handle alone.

Fitment is where it earns its keep on your specific machine. It names wdt730hamz, wdt730pah, wdt750sak, and wdta50sak for Whirlpool, plus a KitchenAid and Kenmore list. The cross-reference codes are the same long family the other W10728159 racks share — W10525646, W10082825, W10525645, and more. That shared code list is the useful part: any of these part numbers on a listing backs up the claim it fits your rack.

One thing to weigh honestly: the dimensions list 21.6″D x 20.7″W x 6.3″H, which differs slightly from the POOLKEY rack’s 22.4″ x 20.8″ x 5.9″, so measure your opening before ordering if your cabinet space is tight. The listing also lists capacity at 9.98 liters, which describes the rack’s own volume rather than a washing spec. Buyers find it works and consider it a sound value, and the laser-welded seam claim is the kind of construction detail you want on a part that sits in hot water every day.

Why it stands out: The nylon-plus-steel build and laser-welded seams target the exact failure — coating peel and rust — that sends most people shopping for a replacement rack, and it drops straight into the WDT730HAMZ fitment list.

The fit note: Its listed dimensions differ from the other racks here, so confirm your opening fits before you order.

Reach for this if: rust and peeling coating are your reason for replacing, and you want a lighter rack that is easier to slide in.

skip it if: your current rack is still solid and the real failure is a worn top-rack adjuster — that is the Funmit kit’s job.

Know the Specs

Part Number and Cross-Reference Codes

A part number is the factory code stamped on the piece you are replacing — think of it as the part’s fingerprint. A listing that lists cross-references (alternate codes the same piece replaces) lets you match an old code you might find on the broken part or in your manual. Before buying, confirm your dishwasher model or your old part number appears on the listing. That one check prevents most wrong-part orders.

304 Stainless Steel vs. Coated Material

304 stainless steel is a food-grade alloy that resists rust and high-temperature steam, which matters in a dishwasher where the rack sits in hot, wet air every cycle. A coated rack can fail by peeling, exposing bare metal that then rusts. A stainless or nylon-and-steel body has no coating to peel. The trade-off is weight: a stainless rack can run heavier than a thinly coated one, so it takes a firmer tug to slide.

ABS Plastic and Rack Adjusters

Rack adjusters and clips are often made of ABS, a rigid plastic that holds shape and clips firmly into place. The weak point is heat over years — plastic flexes and eventually cracks. Reinforced wheel housings help, but a plastic adjuster is still a wear part with a finite life, so expect to replace it again down the line rather than once and forever.

Rack Dimensions and Fitment

Rack dimensions are the width, depth, and height of the basket body. They matter because a rack that is slightly too wide can fight the rails or jam the door. Measure your dishwasher opening and compare it to the listed rack size before ordering. Fitment lists naming your exact model like WDT730HAMZ are the strongest sign, but dimensions catch the odd case a model list misses.

Common Questions

How do I know a rack part fits my Whirlpool WDT730HAMZ?
Check the listing’s fitment list for your exact model, or your old part number against the cross-reference codes. The FrameFirm, S-Union, and POOLKEY lower racks all name wdt730hamz directly, and the Funmit adjuster kit lists WDT730PAHZ0 and closely related models. If your model is not listed, contact the seller with your model number before ordering.
Should I buy a stainless steel rack or a coated one?
Go stainless if you are replacing a rack that peeled or rusted. A coated rack can fail the same way again once the coating wears. The 304 stainless and nylon-and-steel racks here have no coating to peel, so that failure is off the table. The trade-off is that stainless can be a little heavier to slide than a thinly coated rack.
Why does my top rack keep dropping and what part fixes it?
A dropped or tilting top rack usually means the adjuster or its wheels have worn. The Funmit kit covers that with top rack adjusters, positioners, arm clip-locks, and dishrack stops in one box. Replacing the adjuster and its clip together is usually the fix, rather than one small piece at a time.
Do I need to remove the old tine row from my dishwasher rack?
It depends on the rack. The S-Union W10728159 rack does not include the W10728160 tine row, so you transfer your original tine row onto the new rack. The POOLKEY and FrameFirm racks are sold as complete lower-rack replacements. Check the included-components list before you buy so you know whether a transfer step is coming.
How long should a replacement dishwasher rack last?
There is no fixed lifespan, and it depends on material. Stainless steel resists rust and heat better than a coated rack, which can peel over time. Plastic adjusters and clips are wear parts and can crack under repeated hot cycles, so plan on replacing those again eventually. Treat any replacement as a repair that buys you plenty of clean cycles, not a permanent fix.
Can I install a lower rack myself without a repair service?
Yes. The S-Union and POOLKEY racks include four wheels that slot into the rack, and installation is a few steps. The POOLKEY listing recommends cutting off the dishwasher power and water before you start for safety, which is sensible before reaching into the machine. A photo guide or the seller’s installation video helps if you want a visual walk-through.
What is the difference between an OEM part and an aftermarket one?
An OEM part is made by the original manufacturer to the factory spec. An aftermarket part, like the Funmit adjuster kit, is made by a third party to a spec the maker says is equal to or better than OEM requirements. The aftermarket route is usually how you find discontinued or pricier internal parts. The key is confirming the part number and fitment match your model.
Is a rusted or cracked bottom rack worth replacing on my WDT730HAMZ?
Yes — if the rack body is cracked, deformed, or rusting, replacing it is the fix. A rusted rack can shed flakes onto dishes, which is the opposite of clean. A new stainless or nylon-and-steel rack resolves that. Check the listing’s fitment and confirmed part-number cross-references before ordering.
Will a lower rack alone fix a sagging top rack?
No. A lower rack replacement addresses the bottom basket. A sagging top rack is an adjuster or clip problem, handled by the Funmit top rack adjuster kit. Buy the part that matches the failure — top rack hardware for a dropped upper rack, a W10728159 rack for a failed bottom rack.
What warranty comes with these dishwasher parts?
Coverage varies by brand. The S-Union lower rack lists an 18-month warranty, and the POOLKEY lower rack lists a 1-year warranty. The Funmit kit points you to its customer service team for quality issues. Check the warranty field on the listing before buying so you know the timeline, and keep your order record.

The Bottom Line

The whirlpool wdt730hamz parts winner depends on what broke — and for most people that is the top rack. The Funmit W10350375 Top Rack Adjuster Kit is the pick to start with if your upper rack is sagging or dropping, because it covers every wear part in one box and fits your model by name. If your bottom rack is the failed piece, the S-Union W10728159 Lower Rack gives you a stainless replacement without the premium price. And if you want the hollow water-channel design and the widest wheel cross-reference, the POOLKEY W10728159 is the one to reach for. Match the part to the failure first, confirm your model on the fitment list, and you will be back to clean, level dishes in an afternoon.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top