9 Best Weber Spirit Stainless Steel Grates | Sear Marks That Stay

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Your Weber Spirit still fires up fine — it is the grates that gave up. Rust flakes, food sticking, rods bending under a spatula. The fix is not a new grill; it is a set of stainless steel drop-in grates that cost far less and drop straight into the firebox you already own. This guide covers the nine replacement sets that actually fit Spirit 300 and 200 series grills, ranked by how well they hold heat, resist corrosion, and match your original dimensions.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

The wrong grate means a return and a second wait, so check your model number before you order anything. Below you will find the sizing, rod thickness, and fit notes that matter for weber spirit stainless steel grates.

Top Picks

Weber® Stainless-Steel Cooking Grates for Select Spirit Gas Grills
Best OverallWeber Stainless-Steel Cooking Grates4.5+★500+ ratingsThe factory replacement that removes every guess about whether it will fit. When you want the question settled before you order, this is the set that ends it.Check price on Amazon
LOCVCDA 17.5' Stainless Steel 7639 Grates for Weber Spirit & Genesis
Best CoverageLOCVCDA 7639 Grates4.5+★250+ ratingsOne listing that covers more Weber model numbers than any other set here. If you inherited a grill and cannot name the model, start here.Check price on Amazon
Hisencn 7639 Stainless Steel Grill Grates for Weber Spirit 300 Series
Heaviest BuildHisencn 7639 Grill Grates4.5+★250+ ratingsTen pounds of steel that will not flex when you press a burger down. The number that defines this set is 10.21 pounds.Check price on Amazon

How To Choose Weber Spirit Stainless Steel Grates

Most people buy the wrong grates for one reason: they order by grill name instead of by measurement. Weber built the Spirit line across two decades and several generations, and the firebox opening changed along the way. A grate that drops into a Spirit II E-310 will not drop into a Spirit E-210 with side-mounted controls. Measure first, then shop.

Measure Before You Buy Anything

Pull your old grate out and measure it front to back, then side to side, in inches. A full Spirit 300 set typically runs about 17.3 to 17.5 inches deep, with each half around 11.8 to 11.9 inches wide — two halves together make roughly 23.6 to 23.8 inches across. A Spirit 200 set is the same depth but narrower per half, near 10.2 inches, so the pair totals about 20.5 inches. If your numbers land between those two ranges, you are probably holding a different model than you think.

Rod Thickness Decides How It Cooks

Thicker rods hold more heat and recover faster when you flip a cold steak onto them. The budget and mid-range sets here mostly use 7mm solid stainless rods; one premium option steps up to 9mm, which the maker describes as thicker than the common 5mm and 7mm grates. Thicker also means heavier, and heavier means two hands when you lift a half out to swap it.

304 Stainless Versus The Generic Label

Several listings advertise “304 stainless steel” — a food-grade alloy that resists rust and high heat better than porcelain-coated steel. Not every listing says which alloy it uses, and a grate labeled simply “stainless” can still be a lower grade. If corrosion resistance is your reason for buying, look for 304 spelled out in the listing.

Side-by-Side Comparison

Model Best For Grate Size (Each) Rod Thickness Material Amazon
Weber Stainless-Steel Cooking Grates★ Best Overall Factory-fit for Spirit 300 17.3″D x 11.8″W x 0.5″H — Stainless Steel Amazon
LOCVCDA 7639 GratesBest Coverage Widest model coverage 17.5″ x 11.9″ — Stainless Steel Amazon
Hisencn 7639 GratesHeaviest Build Heavy 7mm build on a budget 17.3″D x 11.8″W x 0.5″H 7MM Stainless Steel Amazon
SUZLON 7637 Grates Spirit 200 series owners 17.5″ x 10.2″ — Stainless Steel Amazon
Utheer SUS304 Grates Even heat across Spirit 300 17.3 x 11.8 x 0.5 in 7MM SUS 304 Stainless Amazon
Hongso 304 Grates Denser rod spacing 17.5″ x 11.9″ 7mm SUS 304 Stainless Amazon
GasSaf 304SS Grates Front or side control panels 17.5″ x 11.9″ 7mm 304 Stainless Steel Amazon
Meyafiny 9MM Grates Thickest rods available 17.5″ x 11.9″ 9MM 304 Stainless Steel Amazon
Weber Gourmet BBQ System Grates Insert-swapping cooks 12″ insert + full grate — Stainless Steel Amazon

Detailed Reviews

★ Best Overall

1. Weber Stainless-Steel Cooking Grates

Our pick — 4.5+★ from 500+ verified ratings; the strongest balance of quality and price.

2-Piece SetBrushed Stainless Finish

The factory replacement that removes every guess about whether it will fit.

When you want the question settled before you order, this is the set that ends it. These are Weber’s own grates for the Spirit 300 series — the same 17.3″D x 11.8″W x 0.5″H footprint the grill left the factory with, sold as a two-grate set in brushed stainless. No cross-referencing part numbers, no measuring against a listing photo. The maker’s own description is short and blunt: a replacement part for your Weber grill, easy to install.

What carries this pick past its rivals is build quality, and it is not close. Corrosion resistance and overall construction are the two things that consistently define how owners talk about it, and the summary of that feedback is that these outperform the grates that came with the grill. Fit is the second story — it lands on Spirit 300 series gas grills the way the original did. Cleaning gets the same treatment: a preheat and a brush, and the residue gives up. The set arrives as two pieces, so you can pull one half at a time when you need room on the firebox.

The honest catch is price: you pay a premium over the aftermarket sets for the Weber name. A buyer who only cares about 7mm rods and a correct fit can spend less elsewhere. Weber’s brushed finish and its 17.3-inch depth are the reasons to stay.

Where It Pulls Ahead

  • Weber’s own Spirit 300 replacement — correct 17.3″D x 11.8″W footprint from the start
  • Brushed stainless finish and stainless frame, handle and all
  • Two-grate set lets you lift one half at a time for indirect cooking
  • Reported to hold up better than the grates it replaces, with no corrosion

What To Weigh First

  • Value is the one point where buyer opinion splits — you are paying for the brand
  • Reserved for Spirit 300 series; a 200 series firebox will not take it
  • The listing does not state a rod diameter, so you cannot compare thickness on paper

Go this way if: you own a Spirit 300 series and want the fit question closed permanently, brand parts and all.

Think twice if: you grill on a Spirit 200, or you want the thickest rods your money can buy rather than the correct logo.

Best Coverage

2. LOCVCDA 7639 Grates

2-Piece SetRust Resistant

One listing that covers more Weber model numbers than any other set here.

If you inherited a grill and cannot name the model, start here. Each grate measures 17.5″ x 11.9″, and the pair spans 17.5″ x 23.8″ — the standard Spirit 300 footprint (the size of a three-burner Spirit cook box). The fit list keeps going: Spirit E310 through S330, the Spirit 700, Genesis Silver B and C, Genesis Gold B and C, Genesis Platinum B and C from the 2005 model year, and the Genesis 1000 through 3500 line. That breadth is the whole reason to pick it — one set covers grills across several model families.

The build backs up the fit list. The rods are set with a narrow, orderly gap between them, which is what gives you dark char marks on meat and vegetables — and keeps small pieces from dropping through to the burners. The material is high-quality stainless, described as more resistant to high temperature, corrosion and cleaning than cast iron. That last point is the one you will feel: cast iron needs oiling and rusts when neglected, while this wipes down.

One thing the listing is upfront about is the break-in. It needs to be pretreated — heated, oiled and cooled — before its first cook, and cleaned and stored dry afterward. Skip the pretreatment and the first cook happens on a surface that never settled in. Skip it and you are cooking on a surface that never settled in.

The reason it earns the slot: model coverage. Spirit 300 owners are covered, but so are Genesis Silver and Gold owners who assumed they were stuck hunting discontinued parts.

The one chore it adds: the pretreatment cycle on first use is not optional — heat, oil, cool, then cook.

Reach for this if: your grill badge is unclear and you want the longest compatibility list on the shelf.

Look elsewhere if: you already know you have a 200 series — this one is sized for the wider 300 firebox.

Heaviest Build

3. Hisencn 7639 Grill Grates

7MM Solid RodsRounded Edges

Ten pounds of steel that will not flex when you press a burger down.

The number that defines this set is 10.21 pounds. That is the shipping weight of two grates, and it tells you what you are getting: 7mm solid stainless rods built for strong support and heat resistance. Compare it with the SUZLON 7637 set at 6.67 pounds and the difference is real — this is the heavier half of a two-set comparison, and you feel it every time you lift a grate out.

Each half measures 17.3″ D x 11.8″ W x 0.5″ H, with the pair spanning 23.6 inches across. That matches the Spirit 300 opening, and the listing also claims the Genesis Silver and Gold, Spirit 700, Weber 900 and Genesis 1000 through 3500 fitments plus the 7639, 7638 and 65906 part numbers. The smooth rounded edges matter more than they sound — you handle bare steel when you swap halves mid-cook, and a sharp edge on a 10-pound grate is a genuine annoyance.

What buyers keep coming back to is that it beats the original equipment. Owners describe a solid stainless upgrade over worn grates, with the expectation that it holds up for years without corrosion. Cleaning is the easy part: preheat, brush, or wipe the oil and food residue once it cools.

Weight as a feature: 10.21 pounds against the 6.67-pound SUZLON 7637 — thicker steel, steadier heat, no bowing under a spatula.

Weight as a chore: lifting a half out for indirect cooking takes two hands and a little care.

Built for: the cook who wants a grate that feels like a cast-iron pan but cleans like stainless.

Not for: anyone who swaps grates mid-cook and wants a one-hand lift — 10.21 pounds is not that.

Spirit 200 Fit

4. SUZLON 7637 Cooking Grates

17.5″ x 10.2″ EachFront-Control Models

The narrow set built for two-burner Spirits — and the controls must be on the front.

Spirit 200 owners get left out of most of this list, so this one exists for you. Each grate is 17.5″ x 10.2″, and the pair totals 17.5″ x 20.5″ — noticeably narrower than the 23.8-inch 300 series sets. It replaces Weber part 7637 and covers Spirit E-210, E-220, S-210 and S-220 from the 2013-2017 model years, plus the Spirit II 200 series in E-210, E-220, S-210 and S-220. It also drops into the 46010074, 46100001, 46110001, 46113101 and 47100001 gas grills.

Here is the detail that trips people up, and the listing flags it in capitals: this does not fit a Spirit 200 series with side-mounted control panels. Front-mounted only. Measure where your knobs sit before you order, because no amount of correct depth fixes a grate that lands on the wrong firebox.

At 6.67 pounds for the pair, it is the lighter end of this list — a full 10.21 versus 6.67 against the Hisencn set. The solid stainless is described as heating evenly, and the evenly spaced bars leave grill marks on the food. Owners describe thick steel that fits perfectly and cleans easily, and several swapped it in for cast iron without regret.

Why Spirit 200 Owners Pick It

  • Correct 17.5″ x 10.2″ per grate for the narrower two-burner firebox
  • Solid stainless construction that heats evenly across the surface
  • Evenly spaced bars produce clear grill marks
  • Lighter than the 300 series sets — one hand is enough to pull a half

Before You Click Buy

  • Will not fit Spirit 200 grills with side-mounted controls — front-mounted only
  • Sized for 200 series; it will not span a 300 series opening
  • The listing confirms the model years, so double-check yours falls inside them

Pick it when: your Spirit has two burners and the knobs sit on the front panel.

Pass when: the controls are on the side — that firebox takes a different grate entirely.

Best Heat Control

5. Utheer SUS304 Grill Grates

SUS 304 Stainless7MM Solid Rod

Real 304 steel with rounded edges, sized for Spirit 300 and Genesis alike.

Searing is the point of a grate, and this one is built around heat. Each half is 17.3 x 11.8 x 0.5 inches of heavy-duty SUS 304 stainless, with 7mm solid rods and a non-magnetic alloy — the maker’s way of saying it is genuine stainless, not a magnetic look-alike. It heats evenly, holds that heat, and delivers the sear marks you want on a steak or a portobello cap.

This set covers Spirit I and II 300 series in E310 through S330, plus Spirit 700, Weber 900, Genesis Silver B and C, Genesis Gold B and C from 2002 onward, Genesis Platinum I and II, and the Genesis 1000 through 3500 line. It replaces Weber parts 7638, 7525, 7527, 65619 and 65906 (the factory part numbers stamped on the original grates). Two caveats worth reading twice: it does not fit Genesis 300, and it does not fit the Genesis Gold, Silver or Platinum A.

What wins people over is the durability — owners describe grates that will not warp under high heat, and a whole old Weber coming back to life with them in place. Cleaning is a paper-towel wipe, then soap and water, then a dry towel before storage. The recurring gripe is alignment: a few buyers found the halves did not sit square in the firebox on the first drop-in, though they settled with adjustment.

The heat story: non-magnetic SUS 304 rods at 7mm hold temperature and give even sear marks rather than hot spots.

The fitting story: alignment is the one thing that comes up repeatedly — expect to nudge the halves into square.

Worth it for: Spirit 300 cooks who want genuine 304 stainless and a hot, even sear surface.

Skip it for: Genesis 300 and Genesis Silver, Gold or Platinum A owners — this grate does not fit those fireboxes.

Densest Rods

6. Hongso 304 Stainless Steel 7639 Grill Grates

16 Rods Per SectionFood-Grade 304

Sixteen rods per section instead of the original thirteen — more contact, fewer gaps.

Count the bars and you understand this grate. Each section carries 16 rods at 1/4″ each, all 7mm thick SUS 304 food-grade stainless. The original Weber porcelain grate it replaces has 13 wider rods. Three extra bars across the same width means smaller gaps, which is exactly what you want when a cherry tomato or a chunk of pepper rolls toward the edge.

Each grate is 17.5″ x 11.9″, with the pair at 17.5″ x 23.8″ — Spirit 300 territory, so it drops into that cook box without trimming. The compatibility list is long: Spirit E310 through E330 and S310 through S330 whether controls sit front or side, the SP320, Spirit 700, Weber 900, Spirit II E310 and S310 through SP-330, and the Genesis Silver B and C plus Gold B and C from 2002 on. It replaces too many Weber part numbers to list cleanly, but 7638, 7639, 65619, 65906 and the 7011/7012/7525/7526/7527 family are all covered. One exclusion: not compatible with Genesis Silver A.

The one honest caveat is the rod profile. The square-cut bars draw a mixed reaction — some cooks love the wider contact and heavier sear line, others prefer the round-bar look of the original. It is a matter of taste, not a flaw in the steel.

The density argument: 16 rods a section against the factory’s 13 means small food stays on top where it belongs.

The taste question: square bars sear differently than round ones — know which look you want before ordering.

Right for: cooks who lose vegetables through the old grates and want a tighter surface.

Wrong for: Genesis Silver A owners, and anyone attached to the round-bar feel of the factory grate.

Panel Agnostic

7. GasSaf 304SS Grill Grates

7MM 304 SteelFront or Side Controls

Front-mounted or side-mounted controls, this grate does not care which you have.

Most listings force you to check where your knobs sit. This one removes the question: it states plainly that it fits Spirit 300 series whether the control panel is front or side mounted. Each grate is 17.5″ x 11.9″, the pair spans 17.5″ x 23.8″, and the rods are 7mm thick 304 stainless. It covers Spirit II and GS4 300 series including the LX line, plus Spirit 700 and Weber 900.

The construction detail worth knowing is at the base. Three rectangular horizontal bars run underneath, welded to the upper rods, and the maker says that welding is stronger for it. The edges of the bars are cut straight and described as staying straight even at high temperature, so the grate sits stable on the firebox while you work. One oddity the listing admits: after the high-tech stretching process the 304 steel picks up some magnetism. That is normal, not a sign of a cheaper alloy.

Owner feedback is thinner here than on the older picks, but it lines up: quality first, then how easily it cleans, then fit. For a Spirit II cook who has been burned by a side-control mismatch, the clarity alone is worth the pick.

Choose this if: you own a Spirit II or GS4 300 and want the front-or-side fit question settled for good.

Check first if: magnetism worries you — the maker says it is expected on this 304 steel.

Thickest Rods

8. Meyafiny 9MM Grill Grates

9MM Solid RodsFood-Grade 304

Nine-millimeter rods — the thickest bar on this entire list by a wide margin.

If you measure a grate by its steel, the number here is 9mm. That is the rod diameter, and the maker pitches it directly against the common 5mm and 7mm grates as thicker and stronger. Each grate is 17.5″ x 11.9″, the pair spanning 17.5″ x 23.8″, and the weight lands at 16.98 pounds for the set — nearly 17 pounds of 304 stainless in your hands. The rods are described as not easy to deform and built for long use.

This set fits Spirit E310 through E330 and S310 through S330, the full Spirit II 300 series in E-310 through S-330, plus Genesis Silver B and C and Gold B and C from 2002 onward, Spirit 700, Weber 900, Genesis I through IV, Genesis 1000 through 3500 and Genesis Platinum B and C. It replaces Weber 7638, 7525, 7527, 65619 and 65906, and it also fits the SmokeFire EX4 and EX6 pellet grills (Weber’s wood-pellet models). Not compatible with Genesis Silver A.

The edges are ground smooth, the welds are clean, and the surface is free of sharp contact points — a real consideration when you are handling a 17-pound set. Owners describe it as well built with an amazing fit, and note it holds up better than cast iron. The cost of all that steel is exactly what you would guess: lifting a half in and out is a two-hand job.

The spec that sells it: 9mm solid rods, thicker than the 5mm and 7mm grates most of this list uses.

The weight that comes with it: 16.98 pounds for the pair — plan on handling the halves with both hands.

For the buyer who wants: the thickest, heaviest rods available and does not mind the lift.

Not the buyer who wants: a light grate to pull out one-handed every time they light the burners.

Most Versatile

9. Weber Gourmet BBQ System Grates

12″ Removable InsertGourmet BBQ System

A center section that lifts out, so the grate becomes a system rather than a slab.

This is the only set here that does something different. A 12-inch stainless insert lifts out of the center of the grate, and with it removed the opening takes Gourmet BBQ System accessories — a griddle, a sear grate, a pizza stone, whatever insert you own. The cooking surface is listed at 2700 square centimeters, and the whole thing sits in a stainless frame with a stainless handle.

Fit is broad but not universal: Spirit 4-burner gas grills manufactured since 2025, Spirit and Spirit II 3-burner grills from 2016 through 2024, SmokeFire EX4, EX6 and EPX6 pellet grills, and the Genesis 1-5, Genesis 1000-5000 and Genesis Silver B and C gas grills. That is a narrower Spirit 300 window than the aftermarket sets offer, so confirm your grill’s build year before you commit — a 2015 Spirit 300, for example, falls outside it.

The care routine is the simple part: preheat on high for 15 minutes and brush clean. Owners describe a solid stainless upgrade that is easier to clean than what it replaces and lighter than cast iron. The one honest trade-off is coverage — if your Spirit was built before 2016, this is the wrong generation.

What makes it different: the 12-inch insert comes out, opening the grate to Gourmet BBQ System accessories — a function no other pick here offers.

Who it leaves out: Spirit 3-burner owners whose grills predate 2016, which the compatibility list does not cover.

Best for: Spirit and SmokeFire owners who already own or plan to buy Gourmet BBQ System inserts.

Not for: pre-2016 Spirit 3-burner grills — check your build year before you order.

Know the Specs

Rod Diameter (mm)

Rod diameter is the thickness of each individual bar across the grate. Thicker rods — 7mm, or the 9mm set in this guide — hold more heat and resist bending when you press on them, so a heavy burger press will not bow the grate. Thinner rods heat up faster but can flex under that same press. If a listing does not state a diameter, you cannot compare it on paper, and the safest read is that it is a standard round bar rather than a heavy solid rod.

304 Stainless Steel

304 is a food-grade stainless alloy that resists rust and handles high heat without corroding. It is the alloy called out by most of the sets here. A listing that says only “stainless” without the 304 number is not automatically worse — but if rust resistance is why you are buying, look for those three digits spelled out. Note that genuine 304 can become mildly magnetic after forming; that is normal.

Dimensions and Total Width

Every listing gives a per-grate size and a combined size. A Spirit 300 pair typically totals around 23.6 to 23.8 inches wide; a Spirit 200 pair totals around 20.5 inches. Measure your old grates front to back and side to side before you order. Depth and total width are the two numbers that decide whether a set drops in or rattles around.

Front vs Side Control Panels

On the Spirit 200 and some 300 models, the burner knobs can sit either on the front panel or on the side. This changes the firebox layout and therefore which grate fits. Some sets cover both; others explicitly do not. If the listing says front-mounted only, believe it, and go check where your knobs actually are.

Common Questions

Will a Spirit 300 grate fit my Spirit 200 grill?
No. The 300 series set is wider overall — a pair typically totals around 23.6 to 23.8 inches across, while a 200 series pair spans about 20.5 inches. The depth is close, but the total width is not. Buy a 200 series set like the SUZLON 7637 if your grill has two burners.
How do I measure my existing grates before ordering?
Pull the old grate out and measure it front to back, then side to side, in inches. Do it on each half separately, then add the two widths together. Compare your numbers to the listing’s per-grate and total dimensions. If your depth lands around 17.3 to 17.5 inches and your total width around 23.6 to 23.8, you have a 300 series footprint.
Is 304 stainless actually better than porcelain-coated steel?
For rust resistance and cleaning, most buyers find it so. Porcelain coating can chip, and a chipped spot becomes a rust point. A 304 stainless grate is solid metal through the bar, so a scratch does not expose a different material underneath. It also cleans with a preheat and a brush rather than careful handling.
Does a thicker rod diameter make a real difference when grilling?
Yes, in heat retention. A 7mm or 9mm solid rod holds more heat than a thin bar, so the grate recovers faster after you lay a cold piece of meat down. The trade-off is weight — the 9mm set here weighs 16.98 pounds for the pair, against 6.67 pounds for the lighter 200 series set.
Why does my new stainless grate feel slightly magnetic?
Forming and stretching can leave 304 stainless mildly magnetic even though the base alloy is not. GasSaf states this directly about its grates. A magnet test is not a reliable way to check whether you received genuine stainless — check the listing’s stated alloy instead.
How do I clean stainless steel grill grates without damaging them?
Preheat on high, then brush. That is the care instruction Weber gives for its Gourmet BBQ System grates — 15 minutes on high, then brush clean. For heavier residue, wipe off the excess oil and food once the grate cools, wash with soap and water, and dry it immediately with a towel before storing.
Will these grates fit a Genesis grill as well as a Spirit?
Several do, but not all. The LOCVCDA, Utheer, Hongso, GasSaf and Meyafiny sets list Genesis Silver B and C, Genesis Gold B and C, and the Genesis 1000 through 3500 line as fits. Two exclusions repeat across listings: Genesis Silver A, and in the Utheer listing, the Genesis 300 series. Check the individual listing before ordering for a Genesis.
Do I need to season stainless steel grates before the first cook?
The LOCVCDA listing says yes — pretreat by heating, oiling and cooling before first use. Other sets do not specify a break-in beyond a preheat. Oil after cleaning is a reasonable habit either way, since it keeps food from sticking to bare stainless.
What is the Gourmet BBQ System insert and do I need it?
It is a removable 12-inch center section that comes out of the grate so you can drop in Weber’s system accessories, such as a griddle or sear grate. You do not need it for ordinary grilling — the insert stays in place for that. It is worth the pick only if you plan to use the system inserts.
Can I use these grates on a pellet grill?
Only where the listing says so. The Meyafiny 9MM set lists the SmokeFire EX4 and EX6 pellet grills as compatible, and the Weber Gourmet BBQ System grate covers the SmokeFire EX4, EX6 and EPX6. Most of the aftermarket sets here are listed for gas grills only, so check the fit line for your specific model.

The Bottom Line

For most people replacing weber spirit stainless steel grates, the Weber Stainless-Steel Cooking Grates is the safe call — it is the factory part, built to the exact 17.3″D x 11.8″W footprint of the Spirit 300, so it drops in and ends the guessing. If you want the most model coverage for the least commitment, the LOCVCDA 7639 set fits more Weber numbers than anything else here. And if your grill is a two-burner Spirit with front-mounted knobs, grab the SUZLON 7637 before you accidentally order a 300 series grate that will not span the opening.

Before any of these, measure your old grate and confirm your model number. A 9mm rod is worthless if the grate does not span your firebox.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top