9 Best Whirlpool Washing Machine Suspension Rod

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your Whirlpool top-loader has started walking across the laundry room floor, banging against the cabinet during the spin, or throwing a “uL” unbalanced error on a normal load, the fix is usually one worn part: the suspension rods. This guide covers the replacement kits that actually restore a stable drum, sorted by fit, build quality, and what owners experience after the repair.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see how rod length, ball-and-bushing fit, and included springs change the outcome of the job. Every pick below states its Whirlpool fitment plainly, so you can match your model number before you order a whirlpool washing machine suspension rod.

Top Picks

Whirlpool W10780048 Suspension
Best OverallWhirlpool W10780048 Suspension4.5+★900+ ratingsThe factory part that ends the spin-cycle shuffle without a compatibility gamble. The case for buying this one is simple: it is an O.E.M.Check price on Amazon
Updated W10780045 Washer Suspension Rods Kit (4 Pack) by Techecook
Longest ReachTechecook W10780045 Washer Suspension Rods Kit4.0+★650+ ratingsTwenty-six point seven inches of rod, for the Cabrio-style machines that need the extra reach. Length is the whole story with this kit.Check price on Amazon
AMI PARTS W10780048 Washer Suspension Rod Kit
Kenmore FavoriteAMI PARTS W10780048 Washer Suspension Rod Kit4.0+★950+ ratingsThe metal-bodied kit that has quietly become the go-to for Kenmore top-loaders. At 23.6 inches with a 1.4-pound metal build, this is the shorter, denser rod of the group.Check price on Amazon

How To Choose The Best Whirlpool Washing Machine Suspension Rod

A suspension rod is the shock absorber for your washer tub — a spring-loaded rod that hangs the drum inside the cabinet and soaks up the motion of a spin cycle. When one or more wear out, the drum swings freely and the whole machine shakes. Choosing the right kit is mostly about matching your machine, not about picking a fancy brand.

Match the rod length to your old part

The kits in this guide run from 23.6 inches up to 26.7 inches, and that difference decides whether the rod seats correctly in your cabinet. A rod that is too long or too short will not hold the tub at the right height. Measure the rod you are pulling out, or check the part number stamped on it, before you order. Several makers list their exact length in the title for this reason.

Check the part number, not just the brand

Whirlpool builds many top-load families, and the same brand can use different rods across model years. A kit that fits a WTW4800XQ4 may not fit a WTW7500GC2. Look up your model number on the door or control panel, then confirm it appears in the compatibility list. Kits here replace common numbers like W10780048, W10780045, and W11130359.

Decide if you need the springs too

Most kits include four rods, four suspension balls, and four bushings. The tub centering springs are a separate wear item, and only some kits bundle them. If your drum sags to one side even after new rods, the springs are the next suspect. Buying a kit that includes them saves a second order and a second teardown.

Side-by-Side Comparison

Model Best For Rod Length Pieces Included Fitment Note Amazon
Whirlpool W10780048 Suspension★ Best Overall Genuine OEM replacement — OEM kit Whirlpool, Kenmore, Amana, Crosley, Admiral, Maytag Amazon
Techecook W10780045 4-PackLongest Reach Long-reach fit on Cabrio-style machines 26.7 in 4 rods, 4 balls, 4 housings Whirlpool, Kenmore, Amana, Crosley, Maytag, Admiral, Inglis, Roper Amazon
AMI PARTS W10780048 KitKenmore Favorite Kenmore and Roper repairs 23.6 in 4 rods, 4 balls, 4 bushings Whirlpool-family top loaders Amazon
Blutoget W10780048 Kit Wide model coverage 23.6 in 4 rods, 4 balls, 4 bushings Whirlpool, Amana, Kenmore, Maytag, Roper, Admiral Amazon
Beaquicy W10780048 + Springs Full kit with tub springs 23.6 in 4 rods, 4 springs, 4 balls, 4 housings Whirlpool, Admiral, Amana, Crosley, Kenmore, Maytag, Roper Amazon
APPLIANCEMATES W10780045 Kit Newer Cabrio model coverage — 4 rods, 4 bushings, 4 balls Amana, Whirlpool, Kenmore, Crosley, Inglis, Roper Amazon
Mintu W10780045 Kit Reinforced rod build 25.34 in 4 rods, 4 balls, 4 bushings Amana, Whirlpool, Kenmore top loaders Amazon
Vypart W11130359 Kit W11130359 replacements 26.3 in 4 rods, 4 balls, 4 seats, 4 bushings Maytag, Whirlpool, Kenmore, Crosley Amazon
Whirlpool W11130362 OEM Kit Factory part, no guessing — 1 OEM kit Maytag, Kenmore, Whirlpool Amazon

Detailed Reviews

★ Best Overall

1. Whirlpool W10780048 Suspension

Our pick — 4.5+★ from 900+ verified ratings; the strongest balance of quality and price.

Genuine OEM PartMulti-Brand Fit

The factory part that ends the spin-cycle shuffle without a compatibility gamble.

The case for buying this one is simple: it is an O.E.M. authorized part carrying the Whirlpool name and the exact part number W10780048. That means you are not cross-referencing a third-party substitute list and hoping the hook shape matches. It fits a wide spread of machines too — Whirlpool, Kenmore, Amana, Crosley, Admiral, and Maytag all appear on the compatibility line.

What makes it the crowd favorite is how completely it ends the shaking. Owners describe the drum settling down and the cabinet going quiet, with the violent wobble during the spin stage gone and banging noises gone with it. Unbalanced loads correct themselves again. As owners put it, the part works perfectly and the machine runs like new again, and installation runs about 45 minutes if you have done a repair like this before.

The honest trade-off is what you pay for the OEM badge. Compared with the Techecook kit below, this is the pricier route to the same repair, and it does not bundle the tub centering springs. If your drum sags rather than shakes, add springs to the order.

Why this holds the top slot

  • O.E.M. authorized Whirlpool part — no substitute-part guesswork
  • Stated fitment across Whirlpool, Kenmore, Amana, Crosley, Admiral, and Maytag
  • Runs about 45 minutes to install according to owner accounts
  • Smooth operation and balance are the things owners praise most about the result

Where it asks a little more of you

  • Premium-tier cost compared with third-party kits
  • Springs are not included in the kit
  • You still need to confirm your model before ordering

Buy this if: you want the exact factory part and would rather not compare substitute numbers against a chart.

Think twice if: your drum hangs low on one corner — that points at the springs, which this kit leaves out.

Longest Reach

2. Techecook W10780045 Washer Suspension Rods Kit

26.7-Inch RodsStainless + ABS

Twenty-six point seven inches of rod, for the Cabrio-style machines that need the extra reach.

Length is the whole story with this kit. The rods measure approximately 26.7 inches, which is longer than the 23.6-inch rods on the AMI PARTS and Blutoget kits further down. If your washer is a Cabrio-style top-loader throwing a “uL” unbalanced code, that extra length is often what the cabinet was built around. The set also replaces a long list of part numbers, from W10537442 through W10821951.

Four rods, four suspension balls, and four suspension ball housings arrive together, so you have the full assembly rather than bare rods. The rods are stainless steel with ABS plastic components, which is what keeps them from rusting in a damp laundry room. Techecook backs the kit with a 5-year guarantee.

The fit is where this one divides people. The plastic cups do not always line up cleanly, and the size runs long enough that measuring first is not optional. Check your old rod before you order — the maker flags the 26.7-inch length in bold for exactly that reason.

What buyers report: the vibration fix lands, with the washer no longer bouncing through the spin cycle, and the value lands too — one buyer’s words are that the kit saved them from having to buy a new washer.

The catch to plan around: cup alignment. Set the housings in place and check the seating before you tighten anything down.

Best match: Cabrio-style Whirlpool, Amana, and Kenmore machines that call for the longer W10780045 rod.

Look elsewhere if: your original rod measures nearer 23.6 inches — this kit will not seat right.

Kenmore Favorite

3. AMI PARTS W10780048 Washer Suspension Rod Kit

23.6-Inch Rods1-Year Warranty

The metal-bodied kit that has quietly become the go-to for Kenmore top-loaders.

At 23.6 inches with a 1.4-pound metal build, this is the shorter, denser rod of the group. Twelve pieces ship in the box: four rods, four suspension balls, and four bushings. The part crosses to W10257088, W10349193, W10748952, AP5971398, and a run of other numbers, so it covers a lot of Whirlpool-family machines without a separate adapter.

Most of what owners say depends on one thing — the shaking stops. Machines that were lurching across the floor go back to running like new, and the violent motion during a cycle disappears. Installation is straightforward enough that people handle it themselves rather than calling a repair tech.

The 23.6-inch length is the piece to double-check. It is shorter than the Techecook rods at 26.7 inches and shorter than the Vypart set at 26.3 inches, so it suits the machines built for that size and not the longer-reach models. AMI PARTS backs it with a 1-year warranty.

Best for: Kenmore and Roper owners who want a metal rod at the common shorter length and do not need springs in the box.

Skip the guesswork: confirm your model against the compatibility list before purchasing — the maker invites you to ask if you are unsure.

Reach for this if: your washer takes the standard 23.6-inch rod and you want a metal build with a stated warranty.

Pass if: your tub also sags to one side — order the Beaquicy kit that includes the springs instead.

Widest Coverage

4. Blutoget W10780048 Washer Suspension Rod Kit

23.6-Inch Rods5-Year Guarantee

The compatibility list here reads like a phone book of Whirlpool-family model numbers.

If your model number is obscure, start here. The Blutoget listing names Whirlpool WTW4800XQ0 through WTW4930XW3, Admiral ATW4675YQ1, Roper RTW4640YQ1, Maytag MVWC200XW3, Amana NTW4700YQ1, Inglis ITW4600YQ0, Crosley CAW9244XQ4, and a string of Kenmore 110-series numbers. Few kits spell out that many machines.

The build is a three-material mix — stainless steel, ABS, and rubber — with an upgraded hook design and a coated surface to resist rust. Four rods, four suspension balls, and four bushings ship in the box. Rods measure 23.6 inches. Blutoget backs the kit with a 5-year guarantee.

What owners notice after the swap is the noise. Banging and vibration drop away, and the drum holds its balance through a load again. One owner’s account has the whole job done in under an hour. The toolkit is short: a Philips screwdriver, duct tape, and gloves.

The real draw: breadth. If your machine is a later Whirlpool or a Crosley or an Inglis, this list probably names it.

Keep in mind: the same 23.6-inch length as the AMI PARTS kit, so it is not the answer for the longer-reach Cabrio models.

Pick this for: an unusual model number you cannot find on other compatibility charts.

Not for you if: you drive a WTW7500GC2 or similar newer Cabrio — that machine needs the W11130359 kit below.

Kit Plus Springs

5. Beaquicy W10780048 Suspension Rods with W10400895 Springs

4 Tub Springs Included23.6-Inch Rods

The only kit here that throws in the tub centering springs, so you fix the whole system in one teardown.

Most suspension kits replace the rods and leave the springs alone. This one ships four W10780048 rods at 23.6 inches plus four W10400895 tub centering springs, along with four suspension balls and four housings. Those springs sit around the drum between the rod and the tub, and they are what keeps the drum centered when the rods alone are not enough.

The upgraded spring material is meant to resist deforming and spring back after stretching, which matters if your original springs have gone soft. Everything crosses to W10257087, W10257088, W10349191, and W10349193 among others, fitting Whirlpool, Admiral, Amana, Crosley, Kenmore, Maytag, and Roper machines.

Owners on Kenmore 500 Series washers describe the banging going away entirely, with the drum spinning smoothly and no knocking left. The install tools are a Phillips screwdriver, putty knife, tape, straps, and gloves. Beaquicy backs the set with a 1-year after-sales service window.

Worth the extra pieces: if your drum dips toward one corner or your old springs feel slack, this saves you from ordering springs separately later.

Match first: the rods are 23.6 inches, so confirm your machine takes that length before buying.

Choose this when: you want rods and springs handled in one order and one repair session.

Hold off if: your original rods are longer than 23.6 inches — the length will not line up.

Newer Model Fit

6. APPLIANCEMATES W10780045 Washer Suspension Rods Kit

Stainless Steel4 Rods, 4 Balls, 4 Bushings

A high-strength stainless rod aimed at the WTW4816 and NTW4516 families.

This kit covers some of the newer Cabrio-family models, naming the WTW4816FW2, NTW4516FW2, NTW4605EW0, and WTW4800BQ1 among a long list of compatible numbers. It replaces W10537442, W10622030, W10780053, W10821951, and a spread of others, so it works as a substitute for several older part numbers.

The rods are stainless steel and built to resist deformation, which matters because a bent rod is what sends the drum swinging in the first place. Owner accounts point to a clean result: the shaking and banging go away and the drum spins freely again. The package carries four rods, four bushings, and four suspension balls.

The kit does not list a rod length in the specifications, which is a gap when other listings state theirs outright. If you are buying for a machine you cannot measure easily, that leaves you to verify by model number alone. There is no stated warranty term either.

Where it earns its place: coverage of the newer WTW4816 and NTW4516 families that some shorter kits miss.

Bring your model number: the maker offers to confirm compatibility if you contact them, and that check is worth doing here.

Good fit for: owners of a WTW4816FW2 or NTW4516FW2 who want a stainless rod and a straightforward swap.

Check first if: you cannot find your model on the list — the missing length spec makes this kit harder to verify blind.

Reinforced Build

7. Mintu W10780045 Washer Suspension Rod Kit

25.34-Inch RodsReinforced Steel

A middle-length rod at 25.34 inches for the machines that sit between the short and long kits.

The rods measure approximately 25.34 inches, which puts this kit between the 23.6-inch sets and the 26.7-inch Techecook rods. That middle size is what the WTW4816FW2 and RTW4516FW2 models call for. Each rod is stainless steel with durable plastic ends, and the set ships four rods, four suspension balls, and four bushings at 1.8 pounds total.

Owners get a working washer back from this one — the kit fits correctly, runs like new again, and is treated as a cheaper route than buying OEM parts. Reliability is the standout in what people say about it.

Quality is the split here. Some find it excellent and some call it poor, and durability gets the harshest notes of any kit on this list. Buy it knowing it is a lower-cost substitute rather than a factory part, and keep the box until the first few spin cycles are clean.

The measured case: a size that sits between the common short and long rods, reinforced enough to resist bending at the ends.

The honest caveat: this is the one kit on the list where build quality is genuinely a coin toss in owner accounts — the warranty-backed OEM routes below are the safer bet for long-term confidence.

Buy it for: a model that specifically needs a 25.34-inch rod and nothing else will seat.

Lean elsewhere if: longevity is your priority — the Whirlpool W11130362 factory kit at the end of this list is the sturdier long-term pick.

Cabrio Specialist

8. Vypart W11130359 Washer Suspension Rods Kit

26.3-Inch RodsAnti-Slip Brackets

The kit built for the newer Maytag and Whirlpool machines that use the W11130359 damper.

This one is a direct replacement for W11130359 and the related W10594082, W10821704, and W11027215 dampers. It names Maytag MVWB765FW3, Whirlpool WTW7500GC2, and Kenmore 11026132412 among its fits. The rods run 26.3 inches, close to the longer Techecook set but not the same part family.

Vypart upgrades the hardware with thicker rods and thicker spring dampers, plus black oxide springs with anti-slip brackets. The thicker dampers are aimed at reducing bushing wear and spinning noise.

Owners describe a clean fix for a Whirlpool shaking issue and see it as strong value — one account has it saving the cost of a whole new washer. The maker suggests adding thick grease on the rods during install to extend their life. Kit contents are four rods, four suspension balls, four ball seats, and four bushings.

Why it stands out: it targets the W11130359 damper specifically, which many generic W10780048 kits do not cover.

The trade-off: less owner history than the older kits here, so the track record is shorter even though early reports are positive.

The right buy when: your washer uses W11130359 and the older W10780048 style will not fit.

Wrong pick if: you are repairing a WTW4800 or NTW4516 — those need the shorter rods and a different part number.

Factory Original

9. Whirlpool W11130362 Washer Suspension Rod Kit (OEM)

Genuine OEM PartOEM Substitution

The factory number, straight from Whirlpool, for the machines that take the W11130362 damper.

This is the genuine OEM part, model W11130362, shipped as a single kit. It fits models including the WTW5000DW1, MVWC555DW1, and 11025132410, and it stands in as a manufacturer substitution for W10780040, W10735786, W10594080, and W11228718. That substitution note is useful — if your old rod carries one of those numbers, this is the official replacement.

Buyers get the factory-fit result: the kit runs the machine like new, installs and replaces without drama, and silences the cabinet. Fit and noise level are both on the praise side, with the machine going quiet after the swap.

This is the priciest pick of the nine, and it ships as one kit rather than the four-piece assemblies on most of the others, so read the parts diagram to see what is in the box. Balance carries some mixed notes, which usually points at uneven loading rather than the rods themselves.

The case for factory: a genuine Whirlpool part number with an official substitution list, so you are matching against Whirlpool’s own records rather than a third-party claim.

What it costs you: the highest cost of the group and a single-kit package, so confirm the contents against your parts diagram first.

Best for: anyone replacing a W10780040 or W11228718 damper who wants the exact factory equivalent.

Consider the alternative if: your machine takes the common W10780048 part — the Best Overall pick covers that for less.

Know the Specs

Rod length

This is the number to match first — the kits here range from 23.6 inches to 26.7 inches. A rod holds the drum at a set height inside the cabinet, so the wrong length means the tub sits too high or too low. Measure your old rod from hook to base, or read the part number off it, before you order. A 26.7-inch kit will not substitute for a 23.6-inch one just because the models look similar.

Suspension balls and bushings

The ball sits at the top of the rod and the bushing cushions it where it meets the cabinet. Together they absorb the spin motion. Worn bushings are what let a drum knock and rattle even with fresh rods. Every kit here includes four balls and four bushings, except the single-pack OEM kit where you should check the parts diagram.

Tub centering springs

These sit around the drum between the rod and the tub and keep the drum centered when the load shifts. Only the Beaquicy kit bundles them with the rods. If your drum sags to one side after new rods go in, the springs are the next thing to replace.

Material and rust resistance

Stainless steel with ABS or rubber components is what most kits use, and it matters in a damp laundry room. Coated surfaces resist rust better over time. A rod that rusts seizes and stops absorbing motion, so material is a long-term durability question, not a cosmetic one.

Common Questions

How do I know if my washer needs new suspension rods?
The classic sign is the drum banging against the cabinet during the spin, or the whole machine walking across the floor. Many Cabrio-style washers also throw a “uL” unbalanced code when the suspension is worn. If you can push the drum down and it keeps bouncing loosely, the rods are the likely cause. Check the floor level and the load size first, since both can mimic a bad rod.
Will a suspension rod kit fit my specific Whirlpool model?
Only if your model number appears on that kit’s compatibility list. The same brand uses different rods across model years, so a kit built for a WTW4800 will not necessarily fit a WTW7500GC2. Find your model number on the door or control panel, then match it against the listing. Several makers offer to confirm your fit if you contact them before buying.
How long does a suspension rod replacement take?
Most owners describe the job as a short one. The Whirlpool OEM kit runs about 45 minutes according to owner accounts, and the Blutoget kit is reported done in under an hour. The Blutoget listing claims about 20 minutes for four sets. It is a do-it-yourself repair with basic tools, not a job that needs a technician.
What tools do I need to replace washer suspension rods?
A Phillips screwdriver is the main one. Depending on the kit, you may also need duct tape, a putty knife, straps, and gloves. Always unplug the washer and turn off the water supply before you start. The makers point to repair videos online for guidance, and watching one for your specific model makes the job easier.
Should I replace all four suspension rods at once?
Yes. Rods wear at the same rate and the drum needs even support on all four corners. Replacing one leaves three older rods that will fail and throw the balance off again. Nearly every kit here ships as a set of four, which is the right approach.
Do I need to replace the tub centering springs too?
Not always, but check them. If the drum sags toward one side even with fresh rods, or the old springs feel slack and do not spring back, they need replacing. The Beaquicy kit includes four W10400895 springs with the rods, which saves a separate order. On the other kits, springs are a separate purchase.
What is the difference between a W10780048 and a W10780045 rod?
They are different part numbers built for different machine families, and the length differs too. The W10780048 kits here measure 23.6 inches. The W10780045 rods, like the Techecook set, measure approximately 26.7 inches. The W11130359 damper is a third family, at 26.3 inches on the Vypart kit. Match the part number on your old rod rather than swapping between them.
Is a genuine OEM suspension rod worth buying over a third-party kit?
It depends on how much you value certainty. The Whirlpool OEM kits carry the factory part number and the exact hook shape, so there is no fit guesswork. Third-party kits often cost less and state longer guarantees, such as the 5-year coverage on the Techecook and Blutoget sets. For a machine you plan to keep, the OEM route removes one variable from the repair.
Can new suspension rods fix a washer that is walking across the floor?
It is the most common cause of a walking drum, since the rods are what hold the tub steady during a spin. Owners of these kits consistently describe the machine settling down and staying put. That said, an unlevel floor or an overloaded drum can produce the same symptom. Level the machine and re-balance the load before you conclude the rods are at fault.
Will a new suspension rod kit fix an unbalanced load error?
On Cabrio-style washers, an unbalanced load error is often caused by a failing suspension system. Both the Techecook and Blutoget listings point at worn rods as a cause of the “uL” code. If your error code persists after new rods and a level floor, check the tub springs and the load distribution next.

The Bottom Line

The straightforward pick for most Whirlpool owners is the Whirlpool W10780048 Suspension — a genuine O.E.M. authorized part with broad multi-brand fitment, and rated 4.5+ stars across 900+ ratings. If your machine calls for the longer W10780045 rod, grab the Techecook W10780045 4-Pack at approximately 26.7 inches. And when the drum sags and the springs are shot too, the Beaquicy kit with W10400895 springs handles the whole system in one repair.

Match your part number and rod length first, and the repair is a one-evening job with a screwdriver and a pair of gloves.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top