What Is an ECG and How Does a Smartwatch Measure It? | Wrist

A smartwatch ECG reads the heart’s electrical signal like a one-lead strip and flags possible atrial fibrillation or normal sinus rhythm.

Two metal contacts and one still finger are all a watch needs to sketch the heart’s electrical rhythm. An electrocardiogram records that electrical activity over time, and the wrist version packs the same idea into a single lead with a rhythm label attached.

Scope separates the two. A clinic runs a 12-lead ECG with electrodes stuck across the chest; a wrist device records one lead, close to what cardiologists call Lead I. That single view is enough to screen for an irregular rhythm and nowhere near enough to clear your heart.

How A Smartwatch ECG Actually Works

A smartwatch ECG measures the voltage difference between the sensor pressed against your wrist and a second electrode you touch with your opposite hand. Completing that circuit is what lets the watch record anything at all.

Apple puts the electrical heart sensor in the back of the watch and uses the Digital Crown as the second contact. Your finger closes the loop, the software filters the signal, and the app classifies the rhythm. Apple describes the result as similar to a single-lead (Lead I) ECG.

  1. Update the paired iPhone and Apple Watch to the latest compatible iOS and watchOS versions.
  2. Set up ECG in the iPhone Health app. If no prompt appears, open Browse > Heart > Electrocardiogram (ECG).
  3. Open the ECG app on the watch.
  4. Rest the watch arm on a table or in your lap.
  5. Touch the Digital Crown with a finger from the opposite hand — contact, not a press.
  6. Stay still until the capture ends, then review the label, add any symptoms, and save.

You’ll know it worked when the countdown finishes and a rhythm label appears, ready to save. Past recordings sit in Health under Browse > Heart > Electrocardiograms (ECG).

The sensor wants a dry wrist. Apple advises wiping and drying the watch after swimming, showering, heavy sweating, or handwashing, and the ECG function is rated for 32–95 °F.

Which Watches And Software Run The ECG App?

Apple’s ECG app runs on Apple Watch Series 4 and later, excluding the SE line, plus every Apple Watch Ultra model. Apple states directly that the app is not supported on Apple Watch SE or with Apple Watch for Your Kids.

Other limits stack up. The app is intended for adults 22 and older, availability varies by country because of regulators, and the installed version — 1 or 2 — depends on your region; the watch shows it under Settings > Heart > ECG. No subscription is required; the feature ships with the hardware and software.

Requirement What Apple Documents
Supported models Apple Watch Series 4 and later; every Ultra model
Not supported Apple Watch SE; Apple Watch for Your Kids
Minimum age 22 years old
Paired phone iPhone 11 or later, or iPhone SE (2nd gen), on iOS 27
App version Version 1 or 2, set by region
Availability Varies by country and regulator approval
Subscription None required
Operating range 32–95 °F (0–35 °C)
Price example $399 for Series 12, 42 mm, before tax

Sensor hardware and app support differ sharply between models, so check before you spend: this tested roundup of watches with ECG compares what each one records.

Why Readings Fail And What The Result Cannot Prove

Movement, damp skin, and a loose band cause most failed recordings. More important, a normal result is not proof of a healthy heart, and a watch cannot detect a heart attack, stroke, or heart failure.

  • Talking, fidgeting, or holding the arm in the air adds noise to the trace.
  • Sweat, lotion, or a wet watch weakens the skin contact the reading depends on.
  • A band that slides lets the back sensor drift off the wrist.
  • Touching the crown without steady skin contact stalls the capture.

Treat the label as information, not a diagnosis. The FDA authorization for the ECG app states the data are for informational use only and that nobody should act on the output without consulting a qualified clinician. The same document says the app is not recommended for people with other known arrhythmias, and Apple limits it to identifying atrial fibrillation or sinus rhythm in adults.

What to do next depends entirely on which label you get.

  • Sinus rhythm: file it as a snapshot of one moment. It does not replace a checkup.
  • Atrial fibrillation: share the saved recording with a clinician instead of waiting on symptoms.
  • Inconclusive: dry the wrist and watch, sit still, and record again. Repeated unreadable results deserve a call.

Chest pain, fainting, or severe shortness of breath calls for emergency care, not another reading.

Common Questions

Does A Smartwatch ECG Replace A Hospital ECG?

No. A hospital runs 10 or 12 leads from electrodes placed across the chest, which gives cardiologists several angles on one heartbeat. A watch records a single lead, close to Lead I, and classifies only that view. It can flag an irregular rhythm for follow-up, yet it misses problems a full study would reveal, so a normal watch reading never cancels a scheduled exam.

Can The ECG App Detect A Heart Attack?

No. The software reads rhythm, and a heart attack is a blocked artery, not always a rhythm change. Apple’s app sorts atrial fibrillation from normal sinus rhythm in adults, and the FDA authorization says a watch cannot rule out a heart attack, stroke, or heart failure. Chest pain or fainting means calling emergency services, not opening the app.

Do You Need A Subscription To Use The ECG App?

No. Apple’s documentation lists no subscription, health plan, or extra fee for the ECG app. What the feature does require is compatible hardware — Apple Watch Series 4 or later, or any Ultra model, but not the SE — plus a current iPhone running recent iOS, a user aged 22 or older, and a country where regulators have cleared it.

Sources

Scroll to Top