Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Getting a wheelchair or scooter onto your car is the part nobody prepares you for. The wheelchair folds down fine — lifting dead weight up over a bumper is where backs get hurt and doors get scratched. A wheelchair hoist for car use fixes exactly that: it holds the mobility device at bumper height and carries it, so the heaviest thing you lift is a pin clip. Two types dominate, and picking the wrong one wastes money. Hitch carriers bolt into a 2″ receiver and roll the chair up a ramp, while electric portable lifts raise the chair with a motor and stow in the trunk. This guide covers both, says honestly which pick suits which vehicle, and flags the one mounting detail that ruins more installations than anything else.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
First, an honesty note: a few picks here are multipurpose hitch carriers that will haul a wheelchair perfectly well but also move garden gear or an eBike. That flexibility is a feature, not a mismatch — just confirm the load rating and ramp length before you buy. Below you will find the best wheelchair hoist for car transport, sorted by how you load, how heavy your chair is, and whether your vehicle even has a hitch.
Top Picks



How To Choose The Best Wheelchair Hoist for Car
Start with the number your car actually controls: the hitch. A 2″ x 2″ receiver is the standard for most ramp carriers here, and it is usually rated Class III or Class IV for heavier towing. A Class II receiver is lighter duty, and a 1.25″ receiver will not accept these carriers at all. Measure your receiver before you read another word about weight capacity.
Ramp carrier or motorized lift
A ramp carrier keeps the chair outside the car on a steel or aluminum platform. You roll it up a ramp and strap it down. Nothing enters your trunk, and the chair never has to fold into a small space. A motorized lift does the opposite: it hoists the chair into the trunk or back seat on a strap. These suit a folding chair you can already break down, and they leave your hitch free. If your chair is a power wheelchair with a battery, check the lift’s rating against the chair’s real weight before ordering.
Load rating honesty
A 500 lb rating on a carrier describes the platform, not your chair. It is headroom, not a target. Most folding chairs land far below that figure, which is why these platforms have room for a scooter, a snowblower, or a load of camping gear on the off weekend. What matters is the ramp: a longer ramp lowers the angle, so you push less and strain your shoulders less.
The mounting details nobody mentions
An anti-rattle stabilizer or anti-wobble kit keeps the carrier from shuddering in the receiver, and it is the difference between a quiet highway ride and a constant clunk. A folding platform lets you swing the empty carrier up against the tailgate so it does not block a parking space. And on vehicles with a rear-mounted spare tire, clearance between the hitch arm and the tire decides whether the carrier even mounts.
Side-by-Side Comparison
| Model | Best For | Load Rating | Ramp / Lift Type | Item Weight | Amazon |
|---|---|---|---|---|---|
| Goplus Mobility Scooter Carrier★ Best Overall | Best overall all-rounder | 500 lbs | 42″ ramp, foldable | 70 lbs | Amazon |
| Mockins Aluminum Hitch Carrier with RampLightest Full-Size | Lightest full-size platform | 500 lbs | 41″ x 28″ ramp | 42.5 lbs | Amazon |
| VEVOR Hitch Mount Wheelchair CarrierLongest Ramp | Longest fold-out ramp | 500 lbs | 59″ double-folding ramp | 64.4 lbs | Amazon |
| Culver Portable Electric Wheelchair Lift | Trunk lift for folding chairs | 110 lbs | 4000N motor + safety belt | 25 lbs | Amazon |
| CQmuniu Portable Electric Lift | Rechargeable frees your trunk faster | 110 lbs | Battery lift, 30 cycles per charge | 30 lbs | Amazon |
| IRONMAX Hitch Cargo Carrier with Ramp | Steel platform on a tight budget | 500 lbs | 42″ ramp | 70 lbs | Amazon |
| Silver Spring Hitch Carrier w/Ramp | Three-position ramp flexibility | 500 lbs | 59.25″ ramp, three-position | 81 lbs | Amazon |
Detailed Reviews
1. Goplus Mobility Scooter Carrier
Our pick — 4.0+★ from 450+ verified ratings; the strongest balance of quality and price.
The full-kit carrier that arrives with the stabilizer and straps already in the box.
If you want the shortest path from “my chair is in the garage” to “my chair rides behind the car,” this 500 lb hitch carrier is the pick. It bolts into a standard 2″ x 2″ receiver and fits cars, trucks, and vans, so you are not hunting for a vehicle-specific bracket. The platform runs 50″ long and 29.5″ wide — enough to roll a folding wheelchair or a mobility scooter up the 42″ ramp and park it flat.
What earns it the top slot is that the accessories are not afterthoughts. A 3.5″ side rail runs the length of the frame to stop a wheel from sliding off mid-turn. Two reflectors sit at the back to make the carrier visible after dark. Most useful of all, the anti-rattle stabilizer comes included — that is the bracket that clamps the hitch arm tight so the empty carrier does not clunk around every bump. Two tie-down straps then pin the chair down. Owners who have had this carrier in service for a while largely describe the assembly and install as straightforward, which is what you want from a device that holds a chair at highway speed.
The genuine trade-off is weight and weld consistency. At 70 lbs the carrier is a two-person lift to mount, and the owner consensus reads mixed on build quality, with a handful reporting weld failure and the platform leaning back while driving. Treat it as a platform to inspect and re-torque before the first long trip — and if you want a lighter full-size alternative, the Mockins aluminum carrier sheds pounds. For most buyers this stays the strongest overall package: 500 lbs of headroom, a folding platform for tight parking, and the stability hardware already paid for.
What earns it the top spot
- 500 lb load capacity clears any folding chair or scooter with room to spare
- Anti-rattle stabilizer, 2 tie-down straps, and 3.5″ side rails all included
- Folding platform swings up when empty for parking-lot clearance
- Dual rear reflectors for night driving visibility
Where it asks for care
- 70 lbs empty means a two-person hitch install
- Owner reports split on weld quality, so inspect before long hauls
- Requires a Class III or IV 2″ receiver — no compact-hitch option
Made for: a household with a standard 2″ hitch that wants a stop-strap folding platform for chairs and scooters alike.
Think twice if: you mount alone and cannot lift 70 lbs to receiver height.
2. Mockins Aluminum Trailer Hitch Cargo Carrier
Aluminum build that trims the empty weight, not the load rating.
Here is the number that sells this one: 42.5 lbs. That is the bare carrier, and it is a full platform with a built-in ramp. Compared with the 70 lb Goplus hitch carrier, you are lifting noticeably less metal onto your receiver, which matters most for one-person mounting in a driveway every single trip. The aluminum frame is the reason — it resists rust, so a wet spring does not start eating the finish.
The full-size bed still holds up to 500 lbs and measures 50″ long, 29″ wide, and 8″ high. The ramp drops from the platform to the ground and measures 41″ long by 28″ wide, with rubber edges so a chair’s wheels or frame scuffs do not dig in. A hitch lock and stabilizer come in the set to hold everything rattle-free, plus screw-in eye hooks and two ratchet straps to lash the chair down. There is a built-in license plate mount and reflective strips for visibility, and the frame carries a 5-year limited warranty. Owners describe the rack as sturdy with nice build quality, and the foldability earns steady praise too.
Be careful about one measurement most buyers skip: the hitch arm offers 10.5″ of clearance, and Mockins itself flags that you should check the receiver distance on vehicles with rear-mounted tires. A tire that crowds that gap blocks the mount. Assembly is the other speed bump — owner feedback splits between easy and tedious, so give yourself a clear afternoon. For a lighter full-size hitch platform, this is the one to beat.
Weight-to-capacity win: a 500 lb rating on a 42.5 lb aluminum carrier is the best strength-to-weight mix here.
Clearance caution: the 10.5″ hitch arm clearance is the spec to measure against your rear bumper or spare tire before ordering.
Go with this one when: you want a 500 lb platform you can hang on the hitch without a helper.
Hold off if: your vehicle has a rear-mounted spare that eats the hitch arm’s 10.5″ clearance.
3. VEVOR Hitch Mount Wheelchair Carrier
A 59″ ramp takes the shove out of loading a heavy power chair.
The ramp is where the VEVOR separates itself. It extends to 59″ — long enough to knock the loading angle down so you are pushing a powered chair up a gentler slope instead of heaving it over a steep lip. That extra length is exactly what a shoulder or back injury makes you care about. The ramp folds twice, so after loading you fold it flat against the platform and lock it with a pin. The bed itself measures 53.7″ long, 29.5″ wide, and 8.7″ high, holding up to 500 lbs.
Aluminum keeps the unit manageable at 64.4 lbs, which is lighter than the 70 lb Goplus even though its platform runs bigger. It fits Class III or IV 2″ x 2″ receivers, and VEVOR prints a 55 MPH speed limit for loaded travel — worth heeding on long highway legs. Security hardware is thorough: reflectors, side rails, tie-down hooks, locking latches, and an anti-wobble stabilizer kit. Owner sentiment lines up with the spec sheet on build, with the aluminum frame and the fold-flat ramp both drawing consistent approval.
The honest catch is assembly and the 55 MPH ceiling. Instructions draw a split verdict — some buyers breeze through, others struggle — and if your commute is all interstate, that speed limit means planning slower legs. Weight splits opinion too, and a few find the fit tighter than expected on certain vehicles. Still, for a larger chair on a longer loading angle, the ramp length here is the strongest loading aid on a ramp carrier in this list.
The case for the longer ramp
- 59″ double-folding ramp cuts the effort of loading a heavy power chair
- 500 lb capacity on a 64.4 lb aluminum frame
- Anti-wobble stabilizer, locking latches, and tie-down hooks included
- Ramp folds flat against the platform to shrink the footprint
Things to plan around
- 55 MPH loaded speed limit rules out fast highway runs
- Assembly instructions split owners — allow extra setup time
- Ramp must be locked with the pin after folding, every time
Best for the heavy chair: anyone loading a powered wheelchair who wants a gentler ramp angle.
Skip if: your routes are mostly high-speed interstate where the 55 MPH limit would cramp you.
4. Culver Portable Electric Wheelchair Lift for Car
A 25 lb electric lift you fold into the trunk rather than hang on the hitch.
No hitch? Then a ramp carrier is off the table, and this motorized lift is the alternative. It is a portable hoist that sits in the trunk, backseat, or hatch, straps the folded chair in, and raises it with a button press. Two specs make it practical: the frame weighs just 25 lbs and the motor is rated 4000N, driving a 110 lb lift capacity. That 110 lb rating works for a folding manual chair or a light power chair — it is a different class of load than the 500 lb hitch platforms above, so match it to your chair’s real weight.
Loading takes a few steps, and each one keeps the chair steady. Lock the caster brakes (the small wheel locks on the chair), load the lift, run the safety belt around the chair and adjust the buckle until snug, then hold the up or down button to raise or lower — release to stop. Buyers report the lift is easy to use and well-built, and material quality wins people over most, with the motor’s steady lifting also getting steady mentions. It is FSA and HSA eligible (health savings account funds can pay for it), a practical bonus if you have one to draw on.
The catch is scope. It is designed for cars, SUVs, or a truck trunk and folds into a compact package — but with a 110 lb ceiling it cannot take a full-size power chair, so weigh the chair before ordering. It also wants level ground; the maker’s own guidance warns against sloped or uneven surfaces. Treat those as operating rules, not flaws. For a folding chair you can already break down, this keeps the hitch free and the trunk clear.
Why it fits foldable chairs: a 25 lb lift frame with a 4000N motor hits the sweet of “one person, one trunk, one button.”
Ceiling to respect: the 110 lb capacity and level-ground requirement make it a folding-chair tool, not a power-chair solution.
Take this route if: you have no hitch and want a portable lift that stores in the trunk.
Not for you if: your chair tops 110 lbs — the motor is not built for that load.
5. CQmuniu Portable Electric Wheelchair Lift, Rechargeable
Runs off its own battery for about 30 lifts before it needs a wall outlet.
This lift solves a problem the corded designs ignore: the car may not have a live outlet when you are parked. A lithium-ion battery inside the unit charges fully in 2-3 hours and runs up to 30 cycles per charge — enough that a day of errands does not end in a dead lift in a parking lot. It folds to 29″ by 21″ by 10″, so a slim shape slides into a trunk beside the chair instead of eating the whole cargo area.
Capacity is 110 lbs, same class as the Culver, with adjustable straps and a customizable platform to hold most folding wheelchairs. Non-slip grips and safety locks keep the chair from shifting while it travels, and the aluminum frame resists corrosion. Two safety layers — overload protection and auto-shutoff — cut the motor if you push it past its rating. Owners that turn up for this model report it stows easily and fits most wheelchairs as advertised, and the frame warranty runs 2 years with 2-year motor and battery coverage behind it.
The follow-up question a buyer will ask: 30 cycles is a real limit for a caregiver running multiple trips a day, so charge it nightly rather than weekly. The 110 lb ceiling is the other hard line — check the chair’s weight first. And the 30 lb frame is heavier than the Culver’s 25 lb, though it buys you the on-board battery in exchange. As a rechargeable trunk lift for a foldable chair, it hits the core job cleanly.
If you are always near an outlet: skip the battery and save weight elsewhere.
If you are not: this is the portable lift built for curb-side days without a power source.
6. Silver Spring Electric Hitch-Mounted Carrier Lift
The heavy-stock powered hitch lift that does the raising for you.
You roll the chair onto the platform and press a button instead of pushing it up a ramp. The motor then raises the loaded platform to travel height. It raises in 20 seconds and folds in 6, so loading does not stall the parking lot. Empty, it folds up against the vehicle to keep your rear view clear. The 38″ x 27.5″ platform has an adjustable cradle that extends to 46″ for a longer chair. It is rated 350 lbs on a Class II or higher receiver (the hitch class that fits larger vehicles) — enough for a heavy power chair that portable trunk lifts cannot touch.
Owners mention it is easy to assemble and operate, and they love the build quality and practicality most. For a caregiver, the powered lift means one person can load a 350 lb chair solo. Four self-tensioning retractors (straps that tighten themselves) hold the chair down automatically, so you skip the guesswork of strapping. A manual backup hand crank and a warning LED light (a small indicator lamp) add confidence if the powered mechanism ever acts up. The license plate holder keeps your tag visible.
The trade-offs are weight and motor reliability. At 103 lbs it is the heaviest pick here and wants two people for install. Owner reports on the powered parts split — some say it simply works, others report failures — so buy from a seller with clear service support in case the motor needs attention. Stability divides opinion too. For a power chair that must reach a hitch, though, this is the dedicated powered lift that gets the job done.
What the motor buys you: a 350 lb powered platform that folds back in 6 seconds — no pushing a heavy chair up a ramp.
Where to be cautious: 103 lbs of carrier and a mixed motor-reliability record mean buying from a seller you can call.
The pick for a power chair: a 350 lb powered hitch lift for a chair too heavy to roll up a ramp.
Not the one for a car with a 1.25″ receiver — it needs Class II or higher.
7. IRONMAX Hitch Cargo Carrier with Ramp, 500 LBS
A black-coated steel platform that does the ramp-carrier job at an entry level.
This is the no-frills version of the ramp carrier: heavy-duty steel, black powder-coated to shrug off rain and mud, with a 500 lb bed that measures 48-3/4″ long by 27-3/4″ wide. The 42″ ramp rolls wheeled equipment up, and a spring pull pin locks the ramp in place once the chair is loaded. It fits any car, SUV, van, or truck with a 2″ receiver, and the folding handle lets you tip the empty carrier up for storage.
The secure-transport kit is where it holds its own for the price. An anti-tilt device cuts the shaking while driving and reduces the lean-back that plagues lighter setups. Two red reflective strips sit on the back so trailing drivers keep their distance, and two tie-down straps secure the load. Compared with the IRONMAX’s 70 lb frame, the VEVOR aluminum carrier is lighter at 64.4 lbs — but if you are not mounting solo, that gap is easy to live with. The 42″ ramp matches the Goplus’s ramp length, so loading angle is comparable.
The build is the budget-class weak point. Owner feedback divides sharply on quality, with the steel and its welds singled out for skepticism by a share of buyers. This is the carrier to buy if you want the platform function without paying for premium finishing — then inspect welds, re-check fasteners, and stick to the load rating. A steel 500 lb platform at the lowest tier of this list, and a sensible starting point for occasional chair hauling.
What you get: a 500 lb steel ramp carrier with an anti-tilt device and reflective strips at the bottom of the range.
The honest caveat: quality feedback is mixed and welds draw scrutiny, so check every joint before a long trip.
Right fits: a one-car household needing a basic 500 lb platform for occasional trips.
Wrong fits: anyone who wants premium welding and finish to arrive ready to trust.
8. Silver Spring Scooter & Wheelchair Hitch Carrier with Ramp
The ramp that flips to three jobs instead of just folding away.
Most ramp carriers give the ramp one job: fold out to load, fold away to drive. This Silver Spring gives it three. It swings out to a full 59.25″ extended length for loading, folds flat into the carrier when you are done, and stands upright as a back stop to hold your scooter or chair in place while you drive. The platform measures 48.25″ long by 32.25″ wide, and the aluminum-and-powder-coated-steel build carries up to 500 lbs.
Install is a slide: it goes onto a 2″ Class III or IV receiver, and a step-by-step manual walks you through the rest. An anti-rattle device plus a 5/8″ hitch pin and a T-handle spring pull pin clamp the whole unit down to stop wobble and tilt while you move. Owners describe it as well-built and easy to load and unload, which tracks with the sturdy steel frame. The whole carrier folds flat against the rear of the vehicle, so an empty trip does not cost you parking clearance.
The ramp mechanism is the friction point — some customers note difficulty with it, and a few hit compatibility snags with particular vehicles. Add its 81 lb frame, and this is the carrier to think through carefully if you mount it solo or your vehicle has tight hitch geometry (little room around the hitch). Load carefully and route the ramp deliberately, and it delivers among the most useful ramp designs here. The three-position feature is the reason to pick this over a plain folding ramp.
Choose it when: you want a ramp that doubles as a chair stop and a fold-flat stow.
Reconsider if: the 81 lb frame means lifting alone is a struggle.
Know the Specs
Load rating vs. real chair weight
A 500 lb rating on a hitch carrier is the platform’s ceiling, not a target. Most folding chairs sit far below that figure, which is why carriers in the 500 lb class can also haul a scooter or garden gear. On a portable trunk lift the number matters more: 110 lbs is the line between a folding manual chair and a power chair, and 350 lbs on the powered hitch lifts covers heavier power chairs. Always weigh your chair with its battery and footrests on — that is the number to compare against the rating.
Ramp length and receiver fit
Ramp length sets how steep the climb is. A 42″ ramp like the Goplus’s gets a chair up, while a 59″ ramp like the VEVOR’s lowers the effort when you roll a heavy power chair. On the hitch side, the receiver (the square socket on your vehicle) rules everything: a 2″ x 2″ receiver (Class III or IV) fits the ramp carriers, a Class II or higher receiver fits the powered hitch lifts, and a 1.25″ receiver fits none of them. Measure receiver height and rear-tire clearance before ordering, because a spare tire can crowd the hitch arm’s clearance.
Common Questions
Will a 2″ hitch carrier fit my SUV if it already has a towing package?
What is the difference between a ramp carrier and a portable electric lift?
Can a portable lift take a power wheelchair or only a folding manual chair?
How long does a rechargeable wheelchair lift battery last on a charge?
Do I need an anti-rattle stabilizer for a hitch carrier?
How fast can I drive with a wheelchair carrier on the back?
Can I mount the carrier alone or does it take two people?
What does the load rating leave room for beyond the chair?
Does the carrier need a license plate holder to be street legal?
Can these carriers handle a scooter on a sloped or uneven driveway?
The Bottom Line
For most households, the wheelchair hoist for car winner is the Goplus Mobility Scooter Carrier because it pairs 500 lbs of capacity with the stabilizer, straps, and side rails already in the box. The closer call is between loading styles: if you push a chair up a ramp, the Mockins aluminum carrier at 42.5 lbs makes one-person mounting realistic. If your trunk rather than your hitch is the workbench, the Culver portable lift at 25 lbs is the trunk-space answer. And for a heavy power chair that needs the car to lift it, the Silver Spring electric lift at 350 lbs is the powered one. Whichever way you go, confirm your receiver class and chair weight before ordering, and let the load rating and ramp length decide the rest.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.


