A washer agitator repair kit replaces the worn internal parts that make a two-piece agitator’s top section turn, usually the agitator dogs and cam.
The top half of a two-piece agitator spins free while the bottom half keeps turning. That is the classic failure these kits were built for, and the parts inside are small enough to fit in a fist: plastic dogs and a cam that wear down after a few thousand wash loads.
Here is what the kit actually contains, how to tell whether your washer needs one, and when the problem is something else entirely.
What Parts Are Inside a Washer Agitator Repair Kit?
A standard kit carries the agitator dogs, a replacement cam, and often the agitator bolt. The dogs are tiny one-way clutch pieces that grip in one direction and slip in the other, which is what lets the upper agitator catch and release as the machine oscillates.
Whirlpool’s OEM listings for these kits describe the contents as medium-, short-, or long-length cams paired with agitator-dog hardware and replacement bolt components. The cam length is the part that trips people up. A kit is not universal — the cam has to match your washer model and agitator design.
- Agitator dogs: the wear item. Replace these when the top of the agitator slips or freewheels.
- Cam: transfers movement through the agitator’s internals. Wrong length, wrong fit.
- Agitator bolt: often corroded or stripped by the time you get in there. Worth replacing while the unit is apart.
Which Symptoms Point to the Kit — and Which Do Not?
The kit fixes an upper agitator that will not engage, clicks, or slips while the lower section still moves. If your washer fills and drains but does nothing else, the kit will not help.
The reason is mechanical. These kits only restore the upper portion of a two-piece agitator. The lower section is driven directly by the washer motor through the transmission. A failed motor coupler, transmission, drive belt, drive block, control board, or motor itself sits downstream of the agitator and needs a different repair.
Before you order anything, run this check. Set the washer to a wash cycle with the lid switch satisfied, watch the agitator, and note what moves:
- Top turns free, bottom grabs: agitator dogs or cam. Buy the kit.
- Nothing turns at all: look at the coupler, belt, or transmission before the agitator.
- Grinding or clunking from below the tub: internal drive problem, not an agitator wear item.
Washer Agitator Repair Kit Compatibility and Current Prices
Compatibility is model-specific, so the honest answer is that no kit fits every washer. Enter your complete model number into the manufacturer’s parts lookup before ordering, then match the cam length the listing specifies.
Whirlpool lists these three OEM kits for a range of washers, and the same kits appear under some Kenmore models as well. Prices below reflect US parts listings at the time of writing and can change.
| Kit Number | Cam Length | Listed Price |
|---|---|---|
| 285811 | Medium | $27.14 |
| 285751 | Short | $25.77 |
| 285748 | Long | $43.94 |
| Confirm fit by full model number before purchase. | ||
If you want to compare kits side by side before committing, our breakdown of the best washer agitator repair kits covers fit, price, and what each one actually includes.
How Hard Is the Install, and When Should You Stop?
Disconnect the washer from power first, every time. Whirlpool’s parts pages list repair skill levels and, for some kits, an installation video, but they do not publish a full official step-by-step procedure.
That matters, because the steps vary by model. Your model-specific service documentation is the only source you should follow for the exact disassembly order. What the job generally involves is lifting the agitator cap, unbolting the agitator, and swapping the dogs and cam inside the top section. Every kit listing links to the manufacturer’s own agitator repair kit part page where you can check fit and skill level for your number.
Stop and call a qualified appliance technician if the agitator will not come off safely, if wiring or electrical components are involved, or if the washer still will not agitate after a correctly matched kit is installed. A kit will not fix a stripped agitator shaft, a damaged transmission, a failed coupler, motor, or control.
One more thing worth saying plainly: if your complaint is a smell, an agitator kit is not the answer. Odor is a cleaning issue, handled by running a washer cleaning cycle, not by replacing internal parts.
Common Questions
How do I know which cam length my washer needs?
Enter your complete model number into the manufacturer’s parts lookup and read the kit the catalog returns. Cam length, agitator design, and bolt style all vary by model, so matching by appearance alone is unreliable. If the lookup returns more than one kit, the model number is the tiebreaker.
Will this kit fix a washer that fills but will not agitate?
Usually no. A washer that fills and drains but never agitates points to a failed motor coupler, transmission, belt, or control. The agitator kit only restores movement in the upper portion of a two-piece agitator that still has a working drive below it.
Do I need to replace the agitator bolt too?
Check it while the agitator is off. The bolt corrodes or strips with age and several kits include a replacement. If yours comes out clean and threads smoothly, reuse it; if it fights you or looks chewed up, swap it then rather than reopening the job later.
Sources
- Whirlpool. “Agitator Repair Kit 285811.” Medium-cam kit contents, listed price, and repair skill information.
- Whirlpool. “Agitator Repair Kit 285751.” Short-cam kit, pricing, and Kenmore model listings.
- Whirlpool. “Agitator Repair Kit 285748.” Long-cam kit, pricing, and model-specific compatibility notes.