Weber Spirit E-310 parts and accessories fit only when they match your grill’s exact generation, fuel type, and model number — check the serial label before you buy anything.
One wrong part number means a grate, flavorizer bar, or knob that won’t seat, and return shipping is on you. “Spirit E-310” covers several grills built to different schematics — Spirit Classic, Spirit Original, and Spirit II E-310 GBS appear in Weber’s documentation as separate products with separate guides. Start with the identification label, not the listing title.
Where Do You Find The Model And Serial Number On A Spirit E-310?
Both are printed on an identification label on the grill. Weber’s user-guide page organizes every manual by model and region, so the label unlocks the right document. Weber also recommends giving the exact model and, if possible, the purchase year when asking for accessory guidance.
- Model number tells you the generation and fuel type.
- Serial number pins down the revision, which matters when Weber changes a grate design mid-production.
- Purchase year resolves gray areas when a listing doesn’t state compatibility clearly.
Write all three down. Every step below depends on them.
How Do You Match Replacement Parts To Your Exact Grill?
Confirm compatibility against your grill’s schematic and grate configuration — never trust a title that only says “Spirit 300 series.” Weber’s US replacement-parts collection is the place to check.
| Part | Displayed Price | What The Listing Confirms |
|---|---|---|
| Burner Tube Kit | $54.99 | Listed for Spirit 210/215/220 — do not assume it fits an E-310. |
| Cooking Grates | $171.99 | Listed for Spirit 300 series; still confirm against your grate design. |
| Knobs | $36.99 | Listed for Spirit 310/320/330. |
| Warming Rack | $36.99 | Compatibility not fully stated; verify on the schematic. |
| GBS Insert | $106.99 | Listed for Spirit E-210/E-310 with porcelain-enamelled grates. |
| Flavorizer Bar | $40.99 | Does not identify every E-310 generation; confirm by schematic. |
The burner tube kit is the most common mistake: it covers the 210/215/220 series and says nothing about the E-310. Cross-check every number against Weber’s Spirit replacement parts collection before checkout. For a tested shortlist of what fits and what’s worth adding, see our guide to the best Weber E310 accessories.
Prices are Weber’s displayed US prices and can change — treat them as a snapshot, not a guarantee.
How Do You Install Accessories And Hook Up The Gas Safely?
Accessories mount only on surfaces your model has, and the gas connection follows the owner’s guide exactly — no adapters, no improvised fittings. Weber’s Spirit E-310 product information describes Weber Works snap-on accessories that attach to side rails: a bottle holder, extra tool hooks, and flexible lighting, all sold separately. That rail system exists only on models equipped with Weber Works rails, so don’t confuse it with older side tables or universal aftermarket mounts.
Before any fitment question, confirm five things: the grill family (Spirit, Spirit II, Spirit Classic, Spirit Original), the exact model and revision, the fuel type (LP or natural gas), the grate construction, and the mounting system.
- Place the LP tank in the cabinet and connect the supplied hose assembly. Weber prohibits adapters on the LP connection.
- Turn every burner-control knob off before connecting fuel.
- Run the owner’s guide leak check before lighting anything.
If a burner doesn’t light, turn it off, wait five minutes, and try again. Keep the lid open — lighting with it closed is how flare-ups start.
Weber’s Spirit E-310 LP assembly guide lists required tools and points to the owner’s guide for igniter-module wire routing. Follow both. Never substitute a manifold, regulator, hose, or burner — Weber specifies the supplied hose assembly and prohibits adapters for a reason.
The costliest mistake: ordering by name alone, or buying an LP part for a natural-gas grill. The Spirit II E-310 natural-gas model is a three-burner grill with its own supplied natural-gas hose — a completely different fuel system.
Which Accessory Is Riskiest To Buy Without Checking?
The warming rack and flavorizer bar listings leave the most unsaid, so both demand a schematic check. Weber’s user-guide page pulls the exact manual for your model and region — do that before either lands in your cart.
Never skip the leak check, install anything near heat or blocking ventilation, or alter the cabinet, burners, regulator, or gas lines to make an accessory fit. If a part doesn’t seat on the first try, the part is wrong, not the grill.
Common Questions
Does A Spirit 300 Part Always Fit My E-310?
No. “Spirit 300 series” listings cover several generations, and a part that fits one revision may not fit yours. Confirm against your grill’s schematic and grate configuration using the model and serial number from the identification label.
Can I Use A Universal Adapter On The LP Tank Connection?
No. Weber specifies the supplied hose assembly and explicitly prohibits adapters for the LP cylinder connection. Connect the supplied hose, hand-tighten the coupling clockwise, and complete the leak check in the owner’s guide before lighting.
What If A Burner Won’t Light?
Turn that burner off, wait five minutes, and try again with the lid open. A burner that keeps failing needs service, not repeated attempts.
Sources
- Weber. “Spirit Replacement Parts.” Source for part categories, displayed US prices, and stated model compatibility.
- Weber. “Spirit E-310 LP Assembly Guide.” Source for assembly tools and igniter-module wire guidance.
- Weber. “Weber User Guides.” Source for model- and region-specific owner and assembly manuals.