Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Water pooling under the door with a load half-run tells you the rubber boot has given up. The fix is a door bellow gasket matched to your exact model number; a wrong guess leaks, pops the door open mid-cycle, or will not fit at all. Below you get seven replacement seals that are built for Whirlpool-brand front loaders, each with its real part numbers and its real fitment list, so you can match yours before you order.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Buyers praise fit and installation far more than durability, so start by matching your model number to the part number. Getting the right Whirlpool Washer Door Seal Replacement depends on matching that model code.
Top Picks


How To Choose The Best Whirlpool Washer Door Seal Replacement
The most common wet-floor mistake is buying a seal because the photo looks right. A door boot is a moulded rubber ring, and if the diameter, the clamp grooves or the number of holes are off by a little, it will not seat. Your model plate is the starting point, not the product picture.
Start with the model number, not the brand
Whirlpool, Maytag, Amana and Inglis all share parts families, which is why one bellow often lists hundreds of machine models. Find the model code on the door frame or the back panel and search the listing’s compatibility list for that exact string. If your code is not listed, email the seller before you order — several of these sellers will verify it for you.
Match the part number and its alternates
Every seal carries a primary part number plus a chain of superseded numbers. A listing for W10290499, for example, may also cover W10300559, W10381562 and WPW10381562. Cross-check both directions: your old seal’s number should appear somewhere in the replacement’s list.
Check the openings and the big hole
Some front loaders need a bellow with two openings and an open large hole; others need a single opening with the large hole closed. Getting this wrong is the classic “it fits but the door will not latch” failure, so confirm your machine’s configuration before you buy.
Plan for the install, not just the part
Rubber arrives folded in a box, and a cold creased bellow is harder to stretch over the tub lip. Most of these listings suggest unfolding it and letting it settle in the sun, or soaking it in hot water, before you start. A spring expansion tool and a pair of gloves make the clamp work safer on your knuckles.
Side-by-Side Comparison
| Model | Best For | Primary Part No. | Brand / Type | Stated Coverage | Amazon |
|---|---|---|---|---|---|
| Washer Boot 8182119, W10003800★ Best Overall | Broad model coverage | 8182119 | LinkEZ | About 370 models | Amazon |
| W11314648 W10897390 Door Boot SealBest for Duet Owners | Whirlpool Duet and Maytag | W11314648 | Howaoo | Listed Whirlpool/Maytag/Amana/Inglis models | Amazon |
| WPW10381562 W10290499 Bellow | Quick, cheap swap | W10290499 | eHuangTools | Specific front-load models | Amazon |
| Upgraded W11314648 W10897390 | Leak and odour fixes | W11314648 | Salugre | Whirlpool/Maytag/Amana/Inglis | Amazon |
| SealPro Compatible 8181850 | Kenmore Elite He3t | WP8181850 | Seal Pro | Listed cross-reference only | Amazon |
| WPW10381562 W10290499 (GREALTH) | Budget straight swap | W10290499 | GREALTH | Whirlpool/Amana/Inglis/Maytag | Amazon |
| Whirlpool WPW10381562 OEM | Genuine factory part | WPW10381562 | Whirlpool OEM | Listed Whirlpool models | Amazon |
Detailed Reviews
1. Washer Boot 8182119,W10003800
Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.
The widest model list here, and the one most likely to already cover your machine.
This LinkEZ bellow is part 8182119, also sold as PS897030, WPW8182119 and W10003800, and it is listed as compatible with about 170 Kenmore models and 200 Whirlpool models, plus a run of Amana and KitchenAid machines. That is roughly 370 machines covered by one rubber ring, which is why it takes the top spot in this Whirlpool Washer Door Seal Replacement roundup.
What wins people over is the fit. This is the single most-praised thing about the seal, and it earns more owner approval than any other aspect of the part. Installation follows close behind — plenty of owners get the swap done in under an hour with hand tools. It arrives at 14.02 x 10.51 x 6.97 inches folded in its box, and the seller’s own advice is to lay it flat in the sun so the creases relax before you fit it.
The honest catch is durability. Feedback splits on how long the rubber lasts, with part of the crowd finding it tough and part reporting it tears easily under a hard pull. Treat the spring clamps gently on install and it holds up fine. Fitting is also the make-or-break step — confirm your exact model code against the compatibility list before ordering, because a 370-model list still is not universal.
What lands well
- About 170 Kenmore and 200 Whirlpool models plus listed Amana and KitchenAid machines covered
- Fit is the most-praised trait of the part
- Owners commonly finish the swap inside an hour
- Sized 14.02 x 10.51 x 6.97 inches and easy to flatten in the sun before fitting
Where it splits
- Durability feedback is divided — some find it tough, some report tearing
- A 370-model list still leaves machines out, so verify your code first
Reach for this if: you want the broadest model coverage on the list and a proven fit in one order.
Have a look elsewhere if: your exact model code is not on the compatibility list — email the seller before you commit.
2. W11314648 W10897390 Washer Door Boot Seal
The seal that fixes a cracked, mouldy, noisy door — with a two-year warranty behind it.
Whirlpool Duet and Maytag owners with a leaking or smelly boot get the most out of this one. The Howaoo W11314648 replaces W10897390, 4931032, AP6835703 and PS12711495, and it is listed against a long run of Whirlpool codes including WFW560CHW0, WFW6620HC0 and WFW6622HW2, plus Maytag MHW5630HW0 and MHW6630HC0, Amana NFW5800HW0 and Inglis IFW5900HW0 machines. If your door seal has cracked, smells of mould, keeps the door from closing tight or drips during the spin, this is the part aimed squarely at that list of faults.
Functionality is what people rave about — that it simply seals and the machine runs normal again, which is the whole point of a repair. Quality ranks right behind it, and the build is corrosion-resistant silicone rather than a basic rubber, which holds up better against detergent and damp. The maker backs it with a two-year warranty, the longest on this list.
One thing to check before you buy: this bellow has only one opening and the large hole is closed. If your machine needs two openings and an open large hole, this is the wrong part for you — the maker says so plainly. Installation runs mixed, as it does on every boot here; the rubber fights back, so plan the job for a free afternoon rather than a quick break.
Why it earns second: a silicone bellow, a two-year warranty, and coverage of the common Duet and Maytag codes. It solves leaks, odours and door-closing faults in one swap.
Check first: the single-opening, closed-large-hole design rules out machines built for a two-opening bellow.
the balance: you own a Duet or Maytag and want a durable silicone seal with warranty cover behind the repair.
Wrong turn if: your washer’s door needs the two-opening design with an open large hole.
3. W10290499 WPW10381562 Washer Door Bellow
A straightforward rubber bellow for W10290499 machines, done without fanfare.
This eHuangTools boot is the quiet, competent pick for anyone with a W10290499-family washer. It replaces 2229552, AP6020669, EAP11753988, PS11753988, W10290499, W10300559, W10381562, WPW10381562 and WPW10381562VP, and it is built to create a waterproof seal between the door and the tub opening so water stays inside during the wash cycle. The maker states it is tested to meet original manufacturer specifications.
It is made from premium rubber and, notably, the listing calls it no-odour, which matters when the old seal was the source of the smell. The maker also passes along a genuinely useful install tip: soak the bellow in hot water for a few minutes first so it relaxes back into shape. A spring expansion tool and a pair of gloves are the only real kit you need, and the maker points to YouTube walkthroughs for the DIY crowd. Your package arrives at 14.45 x 8.15 x 6.77 inches, folded.
The catch is fitment: this is not a universal part, and the maker says so directly. Before you order, look up your model on the description page, or send them your model number for a yes/no answer. It is a mid-priced rubber seal without the silicone or warranty story of the pick above, so if longest service life is the priority, spend a little more.
Where it shines: covers the full W10290499 replacement chain, is called no-odour rubber, and the hot-water-soften trick makes the bellow far easier to wrestle on.
The trade-off: not universal, no stated warranty, and basic rubber rather than silicone — the maker tells you to verify your model before buying.
Choose it for: a W10290499-family machine and a job you plan to finish yourself with a hot-soak trick.
Pay more if: you want a silicone seal and a stated warranty behind the part.
4. Upgraded W11314648 W10897390 Washer Door Boot Seal
The problem-solver bellow for a machine that leaks, smells, or growls through the spin.
The Salugre W11314648 is pitched at the messy symptoms: water leaking, odour forming, mould growing on the old gasket, or wear catching up. It replaces W10897390, 4931032, AP6835703, PS12711495 and EAP12711495, and it is made to fit Whirlpool, Maytag, Amana and Inglis front loaders. If you want one part to chase down several faults at once, this is the one to check your model code against.
Quality is the trait that carries this seal most — that is what owners note above anything else. Leakage fixes and value for money both draw solid approval too, so it earns its keep on the practical front. Shipping-fresh, the rubber comes folded at 6.49 x 14.02 x 10.51 inches, and the maker’s own fix is to lay it out to settle or run a hairdryer on low heat to smooth the creases.
The trade-off is the warranty. It carries just three months, versus the two years on the Howaoo seal, and sealing feedback is mixed — some get a leak-free door, some do not. Installation is a mixed bag as well; this is a fiddly bellow either way, so budget a solid afternoon. If you need long cover, the pick above is the smarter buy.
What makes it worth a look: cleanly covers the W11314648 replacement chain, targets leak/odour/mould/wear in one go, and the quality of the part is what people praise most. The hairdryer-on-low-heat trick helps flatten the fold creases.
The catch: only a three-month warranty and mixed sealing feedback, so a leak-free result is not guaranteed for every machine.
Worth grabbing when: you have a Whirlpool, Maytag, Amana or Inglis front loader with multiple symptoms and a modest warranty is fine.
Better to choose the pick above if: warranty length is your top priority — two years beats three months here.
5. SealPro Whirlpool 8181850
The bellow for the 8181850 family — and the Kenmore Elite He3t crowd.
If your old seal reads 8181850 or WP8181850, this Seal Pro ring is the one that matches. It replaces 8181850, 8181662, PS11744939 and AP6011740, and it is reported to work well with Kenmore Elite He3t front loading machines. Fit is the clear bright spot — that is what gets praised most about this bellow — so for owners in that 8181850 family it slots in as expected.
The seal itself splits opinion. Buyers report mixed results on the door staying shut, with some doors popping open mid-cycle, and installation ranges from easy to a real chore. Durability and quality get a mixed read too. It is a round-profile, single-count part from Seal Pro, and it suits the tidy-fit crowd. Buy it only if the price and the cross-reference match outweigh the fussier sealing odds.
So this is the pick for a Kenmore Elite He3t or 8181850-family machine where the fit is the priority and you can live with a door that may need a firm latch. If your door has popped open before, safer to spend a touch more on a bellow with cleaner sealing feedback.
Best part of it: a clean cross-reference for the 8181850 family, including Kenmore Elite He3t machines, with fit as the standout trait.
Where it struggles: sealing and door-closure feedback is mixed, and installation is a coin-flip between quick and fiddly.
Buy it when: your machine is an 8181850-family or Kenmore Elite He3t unit and you want the exact cross-reference.
Look further if: a door that has popped open before makes sealing reliability the deciding factor.
6. [2026] WPW10381562 W10290499 Washer Door Seal
The cheapest way to fix a W10290499 door seal, and it still carries a one-year warranty.
For a household on a tight repair budget, this GREALTH bellow makes the most sense. It is the entry-level option here, yet it still replaces the full chain — W10290499, W10300559, W10381562, 2229552, AP6020669, EAP11753988, PS11753988, AWP50043, PD00003049 and 045900093899 — and it is listed for Whirlpool, Amana, Inglis and Maytag front loaders. The maker uses rubber for sealing ability and corrosion resistance, and backs it with a one-year manufacturer warranty, which is rare at this price point.
Owners mention it fits perfectly, works well and does not leak, and it earns love for being very affordable. That pretty much sums up the case: it is a cheap, round-profile rubber gasket that gets your washer sealing again without a big spend. Just note the material is listed as plastic in the technical spec, so treat the rubber claim as the maker’s description and keep your expectations modest.
Installation is the split point. Some find it easy to fit, others find it genuinely difficult — the bellow is unforgiving either way. At this price, if you are patient with the spring clamp and you have confirmed your model number, this is a sensible repair buy.
The reason to pick it: a very affordable bellow that still covers the whole W10290499 replacement chain, plus a one-year warranty that budget parts rarely include.
Realistic expectation: mixed install feedback and a basic rubber build — this is a tidy-up repair, not a premium silicone seal.
Right for you if: you want the lowest-cost path to a sealing W10290499-family machine and a one-year warranty.
Spend a little more when: you need a smooth install or a longer service life from the rubber.
7. Whirlpool WPW10381562 Door Boot Seal
The factory part, straight from Whirlpool — the no-guesswork option if you can stand the premium.
When you simply want the part your washer left the factory with, this is it. The WPW10381562 is a genuine Whirlpool OEM boot seal, built to Whirlpool engineering standards, and it replaces W10290499, W10300559 and W10381562. Compatibility includes models such as WFW9151YW, MHWE201YW, MHWE251YG, WFW9351YW and MHWE301YW — cross-check yours against the listing before you buy. The maker backs it with a one-year manufacturer warranty.
Owners praise fit and quality most on the genuine article: the door seats cleanly and the part shows no defects. Functionality earns steady nods too. It ships at 20 x 20 x 4 inches, folded into its carton. A factory part matches the machine’s original rubber, clamps and geometry, so you are not chasing a near-fit.
The catch is the premium you pay for the Whirlpool badge and a one-year warranty that is shorter than the two-year aftermarket silicone seal in this list. Installation feedback is still mixed, so expect the same effort as any bellow. Verify your model string faithfully — genuine does not mean universal.
Genuine-part comfort: made to Whirlpool engineering standards, backed by a one-year manufacturer warranty, and reported for clean fit and defect-free quality.
Weigh the premium: the factory part costs more and carries a shorter warranty than the two-year silicone option above. Buy it for confidence, not value.
The genuine route: owners who want the exact Whirlpool part in their machine and will pay for factory build quality.
Cheaper route: the silicone aftermarket seal above with the two-year warranty, if value leads your decision.
Know the Specs
Part Number Cross-Reference
A single door bellow carries one main part number plus a chain of older or alternated numbers, like W10290499 sitting alongside W10300559 and WPW10381562. Your old seal’s number should appear in the replacement’s list. When it does, you have a genuine fit; when it does not, no amount of photo-matching will save you.
Opening Count and Large-Hole Design
Front-load bellows vary in how many openings they have and whether the large hole is open or closed. One Whirlpool seal here has a single opening with the large hole closed, and its maker warns it will not suit machines built for a two-opening, open-hole design. Confirm this detail alongside your model number.
Rubber Versus Silicone
Rubber is the common build and works fine through normal washing cycles. Silicone is the upgrade, described by its maker as corrosion-resistant for a longer service life against detergent and damp. If you are chasing the longest life, the silicone options are the ones to compare.
Warranty Length
Cover varies widely across these seals — from as little as three months up to two years. The warranty is not about the seal failing; it is about how the seller handles a leak that will not quit. A longer warranty often says the maker expects the part to last, so read the description carefully before ordering.
Common Questions
How do I find my washer’s model number for the door boot?
Can I use a W10290499 seal on a W11314648 machine?
Why does my new door seal arrive folded and creased?
What tools do I need to replace a front-load washer door seal?
Is a genuine Whirlpool OEM boot seal better than an aftermarket one?
My new seal fits but the door will not close — what is wrong?
How long should a replacement door bellow last?
Do I need to clean the new seal after it is fitted?
Will a door boot replacement stop my washer leaking?
Why does the big hole matter on a Whirlpool door seal?
The Bottom Line
For most Whirlpool-family front loaders, the Washer Boot 8182119, W10003800 is the one to reach for — it covers about 370 models, and its fit is the most-praised trait of the part. If you own a Whirlpool Duet or Maytag and want a silicone seal with a two-year warranty, the W11314648 W10897390 is the smarter pick. And for a W10290499-family machine on a tight repair budget, the GREALTH WPW10381562 gets you sealing again with a one-year warranty — check the model list, match the opening count, and you will have a dry floor again.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




