9 Best Window AC Unit Duct | Your Window Leaks Cool Air

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Your portable AC is blowing cold, but the window gap is quietly dumping that cool air outside. A vent kit is the cheap fix that turns a sloppy hose-out-the-window setup into a sealed, efficient one. The hard part is matching the plate length to your window and the collar to your hose diameter, and that is exactly what this guide sorts out for you.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see which panels slide wide enough for a bedroom sash, which collars grip a 5-inch hose without tape, and where a dual-hose kit saves you a second purchase. Read on for the honest rundown of the window ac unit duct kits that actually seal tight.

Top Picks

Daisypower Dryer Vent Window Kit, 4' Adjustable Kit with Outdoor Cover
Best OverallDaisypower Dryer Vent Window Kit4.5+★100+ ratingsThe one that slides to fill the window and still gives the rain a way out. What you get in the box is a 4-inch vent plate that slides to cover windows from 16 to 47 inches wide, so it handles both horizontal and vertical openings.Check price on Amazon
Portable AC Window Kit with 5.1” Exhaust Hose for Sliding Window
Hose IncludedPortable AC Window Kit 5.1″ Exhaust Hose4.0+★600+ ratingsPanels and hose arrive together, so you are not hunting for a matching collar. The 5.1-inch stretch hose ships in the box, already sized to the plate collar.Check price on Amazon
Dryer Vent Window Kit with 4' Dryer Vent Hose for Sliding & Hung Windows
Long ReachDryer Vent Window Kit 4″ Hose4.5+★50+ ratingsA four-plate kit that stretches far enough for the tall window nobody else reaches.Check price on Amazon

How To Choose The Best Window AC Unit Duct Kit

A vent kit is just a plate that fills your window opening plus a collar the exhaust hose snaps into. Get those two measurements right and the rest is easy. Get them wrong and you are taping cardboard to glass at midnight.

Match the collar to your hose diameter first

Your exhaust hose has a fixed outside diameter, usually 4 inches, 5 inches, 5.1 inches, or 5.9 inches. The kit’s collar must match that number or the hose will not seat. Measure the hose’s outer circle with a tape, not the opening, before you order anything.

Then check the sliding plate range

Every kit lists a minimum and maximum length it can fill. A three-plate kit that runs from about 16.9 inches up to 47 inches covers most sash and hung windows. If you have a tall sliding door, you need a kit that extends far past that, which is where a dedicated long-reach kit earns its place.

Look at the seal hardware in the box

A foam strip, aluminum tape, and a clamp are the small parts that stop hot outside air from sneaking around the plate. Kits that include them save you a trip to the hardware store. A louvered outdoor cover with a screen also keeps rain, birds, and leaves out of the pipe.

Side-by-Side Comparison

These three columns are the specs that decide fit: the hose diameter the collar accepts, the window length range the plates fill, and the plate material.

Model Best For Hose Diameter Length Range Material Amazon
Daisypower Dryer Vent Window Kit★ Best Overall Everyday sealing on a budget 4 inch 16 to 47 inches — Amazon
Portable AC Window Kit with 5.1” HoseHose Included Hose-and-panel in one box 5.1 inch 16.9 to 48 inches PVC Amazon
Dryer Vent Window Kit 4″ HoseLong Reach Sliding and hung windows 4 inch 16.9 to 59.8 inches PVC Amazon
Alpine Hardware Window Kit with Coupler Two hose sizes in one kit 5 or 5.9 inch 17 to 60 inches PVC Amazon
Memrita Dual Hose Window Seal Kit Dual-hose portable ACs 5 inch 16 to 47 inches PVC Amazon
EcoFlow Wave Window Duct Adapter Square-profile RV and tent venting 5″ exhaust / 6″ intake — PETG Amazon
VIVOSUN Max 88.6″ Sliding Door Kit Tall sliding doors 5.1 or 5.9 inch 16.9 to 88.6 inches PVC Amazon
Flamorrow Window Vent Kit Laser, 3D printer, and dryer venting 3 or 4 inch 16.5 to 47 inches — Amazon
Midea Duo Exhaust Hose Adapter Plate Midea Duo and dual-hose swaps Dual-hose vent — ABS Amazon

Detailed Reviews

★ Best Overall

1. Daisypower Dryer Vent Window Kit

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

4-Inch CollarLouvered Outdoor Cover

The one that slides to fill the window and still gives the rain a way out.

What you get in the box is a 4-inch vent plate that slides to cover windows from 16 to 47 inches wide, so it handles both horizontal and vertical openings. The sliding side panels are the point: one kit covers a narrow bathroom sash or a wide living-room slider without a second purchase. It is the easiest starting point if you just want to corral a 4-inch dryer or portable AC hose out the window.

You get sealing hardware that a bare plate lacks. Aluminum tape seals the gap between the hose and the vent cover, so air stays in. A clamp keeps the hose from dropping off mid-run. A self-adhesive foam strip squishes into the window frame for a tighter barrier. Outdoors, the louvered vent cover has a screen that blocks wind, rain, snow, and the occasional bird or rodent from entering your duct.

The draw here is the 4-inch collar plus sliding plates, not a single standout spec. Builders use it for portable AC exhaust, paint booths, laser engravers, and exhaust fan blowers as long as the outlet is a standard 4-inch duct — the sliding plates and multiple seal parts do the adapting. That 4-inch collar and 16-to-47-inch slide range cover the most common home venting jobs.

What owners keep coming back to

  • Sliding panels reach 16 to 47 inches, so a single kit spans small and large windows.
  • Aluminum tape, clamp, and foam strip are all included for a tighter seal.
  • Louvered outdoor cover with screen keeps rain and animals out of the duct.
  • Works across 4-inch dryer, portable AC, laser engraver, and fan setups.

Where it asks a little more from you

  • It is built around a 4-inch collar, so a 5-inch or 5.9-inch hose will not seat without an adapter.
  • You have to measure your window width beforehand — the sliding range tops out at 47 inches.

The clean fit for: 4-inch dryer or portable AC hoses on a standard-width window where you want the full seal kit in one box.

Measure first if: your exhaust hose is 5 inches or wider — the collar is fixed at 4 inches.

Hose Included

2. Portable AC Window Kit 5.1″ Exhaust Hose

5.1-Inch Hose IncludedThree Sliding Plates

Panels and hose arrive together, so you are not hunting for a matching collar.

The 5.1-inch stretch hose ships in the box, already sized to the plate collar. That removes the most common failure point of buying a panel kit and a hose separately and finding the diameters do not match. Three sealing plates each run 16.9 inches, and you slide and combine them to cover window heights from 16.9 up to 48 inches, locked with butterfly nuts and no tools.

The PVC plates resist high temperatures and aging, and they slide along a rail track to set the length fast. Tuck them into the window rails and you get a tighter seal that keeps hot air out and cool air in. That tight plate-to-frame seal is what keeps the cooled air from bleeding back out the window gap. It is a tidy, dependable kit for a standard sliding window and a single-hose portable unit.

Worth flagging honestly: owners have reported that the included hose runs on the small side for some units. That does not sink the kit — the panel and sliding plates get plenty of praise for build quality — but double-check your AC’s hose spec against the 5.1-inch diameter before you rely on the bundled hose. If your unit takes a wider hose, the panels will still serve you with your own.

Why it earns the spot: The all-in-one packaging is the real value — panels, rail track, and a matching 5.1-inch hose in a single order means fewer returns and less guesswork for a first-time portable AC owner.

The thing to verify: The bundled hose diameter is the catch. If your unit’s exhaust port is wider than 5.1 inches, plan to reuse your existing hose and treat the panels as the purchase.

Reach for this if: you want the panel and hose matched and delivered together for a single-hose portable AC.

Look elsewhere if: you already own a wide hose and only need the plate — you would be paying for a hose you cannot use.

Long Reach

3. Dryer Vent Window Kit 4″ Hose

4-Inch HoseAdjusts to 59.8 Inches

A four-plate kit that stretches far enough for the tall window nobody else reaches.

If your window is wider than most kits allow, this one goes to 59.8 inches using four seal plates — noticeably longer than the 47-to-48-inch ceiling on the Daisypower and CIAIHUI kits above. That extra reach is the reason to pick it: wide sliding windows and tall hung windows that leave other plates short of the frame. Four plates give you more sliding adjustment steps, so you can dial the length closer to the actual opening instead of forcing a near-fit.

The plates are lightweight PVC and work with 4-inch dryer vent hoses, screwed straight onto the seal plate to keep the room cool and hot air out. The package covers the basics well: four seal plates, a self-adhesive foam seal strip, a set of screws, an instruction sheet, and the flexible 4-inch hose itself. Setup is one screw, one slide, one mount — a clean job if you read the sheet first.

It is a focused kit rather than a universal one. The 4-inch collar means it serves dryer venting and standard 4-inch portable AC exhaust, not the wider 5-inch and 5.9-inch hoses some bigger ACs use. For a wide sliding window with a 4-inch hose, though, the four-plate reach is hard to match at this tier.

Best for the wide opening: The 16.9 to 59.8-inch range with four plates is the standout spec, giving you room to seal a window that shorter three-plate kits simply cannot span.

Not a universal collar: The 4-inch diameter is fixed, so larger-hose portable ACs will need an adapter or a different kit.

Suits this setup: a wide sliding or hung window paired with a 4-inch exhaust hose.

Skip if: your AC hose is 5 inches or wider — this collar tops out at 4 inches.

Two Coupler Sizes

4. Alpine Hardware Portable AC Window Kit

Dual Coupler17 to 60 Inches

The kit that carries two collar sizes so you are not guessing at hose diameter.

Most kits make you commit to one hose diameter. This one ships a 5-inch or 5.9-inch coupler with the four plates, so the collar can match a wider portable AC hose than the 4-inch kits. The plates run a rail track that slides and locks with no tools, covering 17 to 60 inches — right in line with the longest kits here and wider than the three-plate 47-inch options. The adjust is genuinely fast, promised at 5 seconds for the length set.

The plates are PVC, built to resist high temperatures and aging, and they can run vertically or horizontally. The clamped plate seals the window opening so hot outside air stays out and the cooled room air stays in. It disassembles easily and is meant to be reused year after year, so it stores flat through the winter.

The honest caution from the manufacturer is worth repeating: the kit fits all exhaust hoses, but you must confirm which of the two diameters your unit uses and check the rotation direction of the connector before ordering. The fit aspect drew a mix of reactions, so measure your hose end carefully. Get that right and the two-coupler design covers more units than most.

The practical wins

  • Coupler covers both 5-inch and 5.9-inch hoses, so a wider AC hose fits without a separate adapter.
  • Slides to 17 to 60 inches, matching the longest reach in this comparison.
  • Works vertically or horizontally and locks with no tools.
  • Reusable and stores flat between seasons.

The fine print to check

  • You must verify both the hose size and the connector direction before ordering.
  • Fit drew a mix of reactions, so an exact internal measurement pays off.

Go for it when: your portable AC runs a 5-inch or 5.9-inch hose and you want one kit that handles either.

Think twice if: you cannot confirm your hose end’s diameter or thread direction — a mismatch here means a return.

Dual-Hose Pick

5. Memrita Dual Hose Portable AC Window Seal Kit, 5″ Diameter

Dual-Hose DesignFoam Seal Strip

Built for the dual-hose AC, where the standard single-collar kits fall short.

If you run a dual-hose portable air conditioner, a plain single-collar panel will not do the job. This kit is cut for a 5-inch exhaust on a dual-hose unit and accepts the hose in either clockwise or anticlockwise orientation, so you are not caught out by a reversed thread. Three PVC panels slide freely to fill windows from 16 to 47 inches, sealing into the window rails.

The sealing foam strip is what ties it together — it connects the panel to the window frame to keep dust, rain, and debris out of your room. The panels are PVC, described as durable and lightweight, and they seal into place with a plain hose-to-plate connection. For the specific buyer already set on a dual-hose system, that reversed-thread compatibility is the feature that saves a return.

The catch to weigh is straightforward: it is a narrower fit than the top picks and rated lower, so it is a better match for the dual-hose owner who needs the specific collar than for a universal shopper. If your AC is single-hose, the simpler single-collar kits above will serve you with less fuss.

The specific buyer: Dual-hose portable AC owners whose unit needs the clockwise-or-anticlockwise collar — that flexibility is the reason this kit exists.

Size the trade-off: It is a focused, lower-rated pick, best treated as the dual-hose specialist rather than the catch-all option.

Made for: a dual-hose portable AC with a 5-inch exhaust that needs a reversed-thread collar option.

Pass it by if: you run a single-hose unit — the single-collar kits here fit more simply.

EcoFlow Fit

6. EcoFlow Wave Window Duct Adapter, 5″ Exhaust / 6″ Intake

Square ProfileFits Wave 2 & 3

The square adapter that turns round ducts into a clean EcoFlow window mount.

Round panels are wrong for some setups, and this adapter exists to fix that. It is made to convert round ducts to a square profile for the EcoFlow Wave 2 and Wave 3 portable ACs, with a vertical 7.87-inch L by 1.57-inch H footprint. Because it is that narrow, it needs roughly 15.5 inches of window width for both ducts — a real advantage in an RV, a camper, or a back-window of a vehicle where a full plate would not fit.

It handles both ports in one package: a 5-inch exhaust and a 6-inch intake, so the dual size matches the Wave’s hose layout. The PETG material is chosen to take the heat of demanding operating temperatures, and the tight fit cuts the gaps that leak cooling and heating. It is a bespoke-fit part, built to snap on rather than be taped together with whatever is on hand.

This one is not a universal plate — it is designed for the EcoFlow Wave family specifically. That is the trade-off: buy it if you own a Wave 2 or 3 and want a clean, near-gap-free vent that saves window width. If you have a different brand of AC, the general-purpose plate kits earlier on the list are your better match.

Why it earns the premium

  • Square 7.87 x 1.57-inch profile only needs about 15.5 inches of window width for both ducts.
  • Covers both the 5-inch exhaust and 6-inch intake for the Wave 2 and 3.
  • Heat-resistant PETG build handles demanding operating temperatures.

Where it is limited

  • Made specifically for EcoFlow Wave 2 and 3 — it will not fit other AC brands.

Made for the Wave owner: EcoFlow Wave 2 or 3 users in a camper, RV, or tent who need a square vent that saves window width.

Not for everyone: any AC outside the EcoFlow Wave family should look at the universal plate kits instead.

Sliding Door Pick

7. VIVOSUN Max 88.6″ Sliding Door Air Conditioner Vent Kit

Up to 88.6 Inches5.1 or 5.9 Inch Hose

Eighty-eight inches of reach for the sliding door the small kits cannot touch.

The number that matters here is 88.6 inches — the kit extends from 16.9 or 21.2 up to 88.6 inches, far past the 47-to-60-inch ceiling on the window kits. That reach is what makes it a sliding-door solution rather than just a window panel: you can span a full patio door and still seal it. The main plate, three track plates, and two extension plates combine along a sliding track so you set the length to your opening.

Two hose sizes are covered: a 5.1-inch or 5.9-inch adapter, so a wider portable AC hose seats without an extra part. The smooth card-slot design tucks into the door or window track for a tight fit. Two rolls of 10-foot sealing tape plus a bird guard and rain cover handle insulation and the outdoors. The PVC plates resist extrusion, aging, and sun exposure, so they should hold up through summer heat.

What wins people over is how simple it is to put together; sturdiness gets a split reaction, with the plates fine for most but not the heaviest-feeling build. That is a fair trade-off for the reach — if your opening is a tall slider, no standard window kit competes. Confirm your door track depth before you commit, and this one solves a space the others cannot.

The sliding-door solver: 88.6 inches of adjustable reach covers a patio door that every window kit on this list stops short of.

Weigh the build: Sturdiness landed mixed, so treat the long plates with a little care when you slide them into the track.

Reach for this if: your AC vents through a tall sliding door and you need the far-reaching plates.

Look elsewhere if: a standard window is all you have — the shorter kits set up with fewer parts.

3″ & 4″ Versatile

8. Flamorrow Window Vent Kit with 3″ and 4″ Hose Adapter

3″ and 4″ AdapterLouvered Outdoor Cover

For the workshop crowd — a kit that fits 3-inch and 4-inch ducts through one panel.

This kit is built for the maker’s bench as much as the bedroom. It carries an integrated 4-to-3-inch adapter, so it fits 3-inch or 4-inch duct outlets on laser engraver enclosures, 3D printer enclosures, grow tents, dryers, and portable AC window seals. That two-size collar is the reason to pick it if you run a 3-inch exhaust — most kits here are locked to 4 inches or wider.

Sliding side panels fill horizontal or vertical windows from 16.5 to 47 inches, so it covers a typical workshop window without a second plate. Outdoors, the louvered vent cover blocks wind, rain, and snow while keeping dust and leaves out, and the louvers open and close quietly as air flows through. Inside, aluminum tape, a clamp, and a self-adhesive foam strip handle the sealing around the duct and frame.

The part that proves it is the positive feedback on functionality — it draws praise for actually venting an engraver without fuss. The narrow window range is the honest limit: at 16.5 to 47 inches it is the smallest span here, so a wide slider needs a longer kit. For a standard workshop window and a 3-inch or 4-inch hose, though, it is the versatile multi-tool of the group.

What makes it useful: The 4-to-3-inch adapter opens it to laser engravers and 3D printer enclosures that need a 3-inch vent, a fit the wider kits cannot offer.

The one limitation: The 16.5 to 47-inch window range is the shortest span here, so measure a wide opening before ordering.

The workshop match: laser engraver, 3D printer enclosure, grow tent, or dryer owners venting a 3-inch or 4-inch hose through a standard window.

Skip if: your window runs wider than 47 inches — the panel range tops out there.

Midea Duo Fit

9. AC Exhaust Hose Adapter Plate Midea Duo

Dual-Hose AdapterSnap-In Fit

The purpose-built plate for hose-in-hose systems that snap in and stay put.

Hose-in-hose dual-hose ACs need a plate that matches their exact vent, and this one snaps straight into place. It is designed for the Midea Duo, Whynter ARC, Toshiba, Cooper & Hunter, Danby, Keystone ASHRAE, and Real Cool dual-hose units — a compatibility list that means you are not adapting a universal plate to a proprietary vent. The fit earns the most goodwill here, with owners reporting it seats exactly as intended.

Beyond the snap fit, it is a DIY-friendly adapter for windows, casement windows, and sliding doors. The ABS construction gives it a solid feel, and the package includes the adapter, a cutting template and install guide, and screws — enough to plan a clean custom cut rather than rush it. The template is the underrated part: measure, mark, and cut once.

The catch is that it is a narrow-fit part: it works with the named dual-hose brands and not a generic single-hose AC. It also expects you to cut your own panel opening to the template, so bring a steady hand and the right tool. For a Midea Duo owner who wants an exact, no-workaround fit, none of the universal plate kits above match this level of purpose-built match.

Reasons it fits the bill

  • Snaps directly into the dual-hose vent on Midea Duo and named hose-in-hose brands.
  • ABS build with a cutting template, install guide, and screws included.
  • Works on windows, casement windows, and sliding doors.

What to expect

  • Fits only the named dual-hose brands, not generic single-hose ACs.
  • You cut your own panel opening to the included template.

Right for: Midea Duo and named hose-in-hose AC owners who want an exact, snap-in plate instead of a workaround.

Not the one if: you have a single-hose AC — this adapter is cut for the dual-hose vent only.

Know the Specs

Hose Collar Diameter

The collar is the round hole the exhaust hose pushes into. It must match your hose’s outside diameter — a 5.1-inch hose will not grip a 4-inch collar, and a 5-inch hose needs a 5-inch or 5.9-inch coupler. Measure the outer circle of your hose end, not the inner opening, before you order. Kits that list two sizes, like the Alpine Hardware 5 and 5.9-inch coupler, cover more units with one purchase.

Sliding Plate Length Range

The length range is the window opening the panels can fill once combined. A three-plate kit that runs 16.9 to 48 inches covers a typical sash window; a four-plate kit stretches to 59.8 inches for a wider one; a sliding-door kit reaches 88.6 inches. Too short and you leave a gap of hot air around the plate. Check your actual opening against the maximum before buying.

Seal Hardware

Foam strips, aluminum tape, and clamps are the small parts that close the leaks around the plate and the hose. Foam squishes into the window frame, tape wraps the hose-to-collar gap, and a clamp stops the hose from slipping off. Kits that bundle all three spare you a hardware run. An outdoor louvered cover with a screen keeps rain, birds, and leaves out of the duct.

Plate Material and Heat

Most plates are PVC, chosen to resist aging and high temperatures so they survive a baking window. Some adapters use PETG for demanding operating temperatures, and the Midea Duo plate is ABS for a solid feel. Material matters because a plate sits in direct sun against a hot window — a weak one can warp and lose its seal over a summer.

Common Questions

How do I know what hose diameter my AC uses?
Measure the outside diameter of your exhaust hose end with a tape. Compare it to the collar sizes on the kit — options here span 3-inch, 4-inch, 5-inch, 5.1-inch, and 5.9-inch. The Alpine Hardware kit offers a 5 or 5.9-inch coupler, and the Flamorrow kit fits 3 or 4-inch hoses, so both cover more than one size.
Will a window vent kit stop my portable AC from cooling well?
A properly sealed kit improves cooling rather than hurting it. The plates block hot outside air and hold the cooled room air in. Loose cardboard or an open gap lets heat back in and makes the unit work harder.
Can I use these kits on a sliding door instead of a window?
Only if the kit reaches far enough. Standard window kits top out between 47 and 60 inches, which is short for a patio door. The VIVOSUN kit extends up to 88.6 inches and is built for sliding doors. The Midea Duo adapter plate also works on sliding doors for the named dual-hose brands.
What is the difference between a single-hose and dual-hose vent kit?
A single-hose kit has one collar for one exhaust hose. A dual-hose kit, like the Memrita, is cut for a hose-in-hose portable AC and accepts the hose in clockwise or anticlockwise orientation. The Midea Duo adapter plate is also built specifically for hose-in-hose systems from named brands. Matching the kit to your AC type is the key.
Do I need the foam seal strip if the plate already fits?
The foam strip closes the small gap between the plate and the window frame, and it helps insulate. Even a plate that fits the width can leak around the edges. The Daisypower, Memrita, and Flamorrow kits include a self-adhesive foam strip for exactly this job, and aluminum tape seals the hose-to-collar gap.
Will these kits fit both horizontal and vertical windows?
Most do. The Daisypower kit accommodates horizontal and vertical sliding windows, and the Alpine Hardware plates can run vertically or horizontally. Check the listing’s window range for the orientation you have, since the length and the width limits can differ between the two.
Can I use a window vent kit for a dryer or laser engraver?
Yes, if the collar matches. The Daisypower kit is used for dryer venting, paint booths, and laser engravers on a 4-inch duct. The Flamorrow kit fits 3 or 4-inch outlets on laser engraver enclosures, 3D printer enclosures, and dryers. Just confirm the duct size before ordering.
How do I keep rain and birds out of the vent?
Use a kit with an outdoor louvered cover and screen. The Daisypower and Flamorrow kits include a louvered cover that blocks wind, rain, and snow and keeps out birds, rodents, and leaves. The VIVOSUN kit adds a bird guard and rain cover too. The louvers open and close as air flows through.
Can I reuse a vent kit in the next summer season?
Yes. The PVC and PETG plates are built to resist aging and temperature, and the Alpine Hardware kit is meant to be reused year after year with easy disassembly. Store the plates and seal strips flat between seasons, and check the foam strip for wear before you reuse it in the spring.

The Bottom Line

For a clean, do-it-all seal on a standard window with a 4-inch hose, the Daisypower Dryer Vent Window Kit is the safest starting point. The sliding 16-to-47-inch plates, the foam-tape-clamp kit, and the louvered outdoor cover cover all the bases in one order. If your window runs wider, the Dryer Vent Window Kit with 4″ hose stretches to 59.8 inches for the reach shorter kits miss. For a tall sliding door, the VIVOSUN Max 88.6″ kit is the reach you cannot fake. And if you own a Midea Duo or another hose-in-hose unit, the Midea Duo Adapter Plate snaps in exact instead of forcing a universal plate. Pick by your hose diameter first, then by window length. Those two numbers decide the whole purchase.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top