9 Best Washer Machine Parts | Replace The Part, Not The Machine

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your washer walks across the floor, bangs during the spin, or flashes an error instead of draining, the fix is usually one small part — not a new machine. This guide covers the suspension rods, lid locks, drain pumps, hub kits and couplings that actually solve those faults, in plain English, so you can match the right part to your model before you order.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see the part that solves each symptom, the model numbers it replaces, and the honest catch that decides whether it is right for your machine. Every pick below is a washer machine parts match for a specific fault, so you fix the cause once and stop guessing.

Top Picks

APPLIANCEMATES WA50R5200AW/US Suspension Rod Kit
Best OverallAPPLIANCEMATES WA50R5200AW/US Suspension Rod Kit4.5+★500+ ratingsFour stainless rods that stop a Samsung top loader from walking across the floor. This is the pick for a Samsung top-load washer that wobbles, bangs or throws a “DC” error.Check price on Amazon
Popbee W10528947 W10396887 Washer Basket Driven Hub Kit
Best ValuePopbee W10528947 W10396887 Washer Basket Driven Hub Kit4.5+★350+ ratingsA two-piece hub and bushing that gets a slipping Whirlpool basket turning again. When the basket on a Whirlpool, Maytag or Kenmore top loader spins freely but the clothes do not move, the drive hub is worn and this is the set that swaps it.Check price on Amazon
AMI PARTS TB123A Washer Spanner Wrench
Top PerformerAMI PARTS TB123A Washer Spanner Wrench4.5+★900+ ratingsThe lever that breaks loose a tub nut that has been seized for years. Before the parts go in, the tub nut has to come off, and that is where this wrench earns its place.Check price on Amazon

How To Choose The Best Washer Machine Parts

You start with the symptom, not the part. A washer that dances across the floor on a spin cycle points to the suspension rods. A machine that will not drain points to the drain pump. A lid that will not click or a machine that will not start points to the lid lock switch. Get the symptom right and you have already narrowed the shelf down to a handful of candidates.

Match the model number, not the logo

Every listing below prints the exact model numbers it replaces, and that list is the part you should read first. A Samsung top-load suspension rod set will name WA-series codes; a Whirlpool and Maytag drive hub will name WTW and MVWX codes; a GE lid lock kit will name GTW and HTW codes. Find your own code on the sticker inside the door or on the back panel and check it against the listing before you buy.

Decide between a single part and a full kit

Some faults come from one worn piece and some come from a cluster that wears together. A clutch, motor coupling and agitator dog are commonly replaced as a three-piece kit because they fail in sequence. A lid lock kit bundles the switch, the bezel and the striker for the same reason. Buying the kit once usually beats a second order mid-repair.

Look at what the tools need to reach

Some jobs need a tool before they need a part. Removing the inner tub lock nut on many GE and Whirlpool machines takes a spanner wrench with the right pin spacing, and that wrench is the difference between a twenty-minute job and a stripped nut. Check the nut size against the wrench spec before you start.

Side-by-Side Comparison

Model Best For Part Type Pieces Included Primary Fit Amazon
APPLIANCEMATES Suspension Rod Kit★ Best Overall Stopping the shake Suspension rods 4 Samsung top load Amazon
Popbee Basket Driven Hub KitBest Value Basket not spinning Drive hub and bushing 2 Whirlpool, Maytag, Kenmore Amazon
AMI PARTS TB123A Spanner WrenchTop Performer Tub nut removal Spanner wrench 1 GE, Whirlpool Amazon
Seentech Motor Coupling and Clutch Kit Restoring an old machine Coupling, clutch and agitator dog 4 Whirlpool, Kenmore, Roper Amazon
Cykemo Lid Lock Switch Kit Lid will not lock Lid lock switch, bezel and striker 3 GE, Hotpoint top load Amazon
Ben’s Appliances Bounce-B-Gone Grease Kit Saving the old rods Suspension grease and foam inserts 1 jar plus inserts Whirlpool, Samsung Amazon
Pulluty DC97-16350U Suspension Rods Full rod replacement Suspension rods 4 Samsung top load Amazon
Yendse WH23X28418 Drain Pump Washer will not drain Drain pump 1 GE, Hotpoint Amazon
GE WH43X30957 Agitator Assembly Genuine GE replacement Agitator assembly 1 GE, Hotpoint Amazon

Detailed Reviews

★ Best Overall

1. APPLIANCEMATES WA50R5200AW/US Suspension Rod Kit

Our pick — 4.5+★ from 500+ verified ratings; the strongest balance of quality and price.

Stainless Steel4 Rods Included

Four stainless rods that stop a Samsung top loader from walking across the floor.

This is the pick for a Samsung top-load washer that wobbles, bangs or throws a “DC” error. You get four suspension rod and spring assemblies, made of stainless steel that the listing describes as thicker and wear-resistant so it holds shape under the drum’s load. Each rod dampens the movement of the inner drum, which is the whole reason your machine stays level while the tub spins.

Build quality is what wins people over: the stainless rods draw the largest share of positive feedback by a wide margin, and owners also praise the restored drum balance. Fit is the next thing buyers confirm, and the listing gives you the numbers to check: each rod runs roughly 26.18 inches, so measure your original bar before ordering. The replacement list covers DC97-16350U, DC97-16350S, DC97-16350E, DC97-16350C, DC97-16350D, DC97-16350J, DC97-16350K, DC-16350T, DC97-05280U, DC97-05280H, DC97-05280K, DC97-05280X, DC97-18610B and DC97-18610C, plus AP5966911 and PS11719937.

This kit is sold with a 5-year return and exchange window, and the install is documented in a video — allow 20-30 minutes, and cut the power and water first. The honest catch is durability at the far edge: a small number of units are reported to fail inside about six weeks, so check the rods are seated and the machine is not overloaded after the repair. At 4.5+ stars across 500+ owners, it is the crowd favorite in this group.

What earns it the top spot

  • Four complete rod and spring assemblies in one order, so you refresh the whole suspension at once
  • Stainless steel construction with high-performance springs that hold the drum steady at spin speed
  • Addresses wobble, banging, spin errors and the “DC” code from one repair
  • 5-year return and exchange support with a video walkthrough of the install

The honest trade-off

  • Only fits Samsung top-load models — check your code against the long replacement list first
  • Roughly 26.18 inches per rod means size mismatch is the main return reason, so measure
  • A minority report early failures, so seat the rods carefully and do not overload

Best for Samsung owners: a WA-series top loader that shakes, bangs or throws a DC error and needs all four rods refreshed at once.

Look elsewhere if: you run a Whirlpool, Maytag or GE machine, or your drum is holding steady and the fault is elsewhere.

Best Value

2. Popbee W10528947 W10396887 Washer Basket Driven Hub Kit

Drive HubBushing Included

A two-piece hub and bushing that gets a slipping Whirlpool basket turning again.

When the basket on a Whirlpool, Maytag or Kenmore top loader spins freely but the clothes do not move, the drive hub is worn and this is the set that swaps it. The package holds one W10528947 basket driven hub kit and one 52719 basket bushing — two pieces total, matching the plastic construction and the M1 fastener type listed for the bushing. The hub measures 3.64 x 3.64 x 0.86 inches and weighs 27.22 g, so it slips into the palm of your hand.

For a two-piece part, this hub handles a lot of brand coverage. The listing names Maytag, Whirlpool, Kenmore, Amana, Crosley, Inglis and Admiral, and the replacement codes stretch across long model lists beginning with 11021302013, 11021492311, 11022342511 and on through the 2DWTW5500XW1, 3LWTW5550YW2 and 7MMVWC series. It also stands in for W10396887, W10528947VP, 2684908, AP5665171, EAP6012095 and PS6012095. Function and quality are what buyers report on most, and the part does its job when the codes line up.

The recurring gripe is durability, and it is sized rather than sweeping — some hubs are reported to wear again, which is why fit and installation feedback splits both ways. This is a fit-sensitive part, so match the codes on your machine sticker before you buy. At a budget-friendly price, it is worth trying before you price out a whole new washer.

Where it earns its slot: two pieces covering a huge spread of Whirlpool-family models, at a budget-friendly tier that makes the repair worth attempting.

Treat the fit seriously: the hub relies on an exact match, so the model sticker on your washer — not the brand logo — is your buying guide here.

Reach for this if: your Whirlpool, Maytag or Kenmore basket has stopped turning and your model code appears in this listing.

Think twice if: you have not confirmed the code — this hub does not cross to Samsung, LG or GE top loaders.

Top Performer

3. AMI PARTS TB123A Washer Spanner Wrench

Tub Nut WrenchMetal Build

The lever that breaks loose a tub nut that has been seized for years.

Before the parts go in, the tub nut has to come off, and that is where this wrench earns its place. It is a 1-11/16 inch tub nut wrench built as a pin spanner with a box or open end, in metal with painted and polished finishes. The job it does is simple — give you a real grip to apply torque on the inner tub lock nut without rounding it. If you have a GE or Whirlpool tub nut that has calcified or rusted into place, this is the tool.

What gets praised most here is plain functionality — it works, and the metal takes a beating rather than flexing. The wrench replaces TJ90TB123A, AP4503397, 1021707, 12393, 123931, 2020913, 22038313, 38313, 41-123, 70110, ERTB123A and TB123, and it carries a 90-day warranty. The listing’s scope note is honest about brand fit: it works with most top name brands, and if you are unsure, ask in the customer questions before ordering.

Two things to weigh up before you buy. It is heavier than buyers expect, and the size runs about 1/3 inch too large for some tubs, which turns nut removal from easy into a fight. Check the nut diameter against the wrench spec first. Measure your tub nut first — a wrench that seats cleanly pays for itself on the first tub job.

Why owners keep it in the toolbox: a heavy metal spanner that cracks loose stubborn tub nuts and survives the leverage you need to use on it.

The measurement that matters: 1-11/16 inch with a 1/3 inch oversize tendency noted — confirm your nut size before ordering so the pins seat cleanly.

Your tool if: you are pulling a GE or Whirlpool tub to swap the hub, rods or seal and the lock nut will not budge.

Not your tool if: you cannot measure the tub nut first — the oversize fit is the one thing that stops this wrench gripping.

Most Versatile

4. Seentech 285753A Motor Coupling and 285785 Clutch Kit

Full KitOEM Standards

One box that covers the three parts old Whirlpool washers wear out, in order.

If you are reviving an older Whirlpool, Kenmore, Roper or Crosley machine, this kit saves you a second trip. It bundles a 285785 clutch kit, a 285753A motor coupling kit and an 80040 agitator dog, and the clutch kit itself adds a clutch assembly, brake cam driver, retaining clip and two springs — the blue spring for large-capacity washers and the green for compact ones. The dimensions run 5 x 5 x 2.1 inches and the metal is alloy steel with a glossy stainless finish, so the parts feel substantial from the start.

The replacement numbering is the real value here. The clutch kit stands in for 85790, PS334641, 285331, 3351342, 3351343, 3946794, AP3094537, 3350015, 3350115, 285380, 285422, 285540, 285761, 387888, 388948, 388949, 3946847, 3951311 and 3951312. The coupling covers 3352470, 3363664, 3364002, 3364003, AP3963893, ER285753, SB285753A, 661560, 8559748 and AH1485646. The agitator dog covers 285612, 285770, 3109, 3366877, 387091, 80040VP and 99989668. Quality leads what owners mention, with the restored function close behind.

The trade-off is durability on the clutch side — a share of customers note failure after about three months, which is why that aspect reads mixed rather than glowing. Match the spring colour to your drum size and follow the listing’s note that the parts meet OEM standards. At a mid-range price, you are paying for the convenience of one teardown as much as for the three parts.

Best reason to buy it: three high-wear parts in a single order, so a machine that needs a clutch also gets the coupling and agitator dog refreshed in the same teardown.

Fit check you must do: confirm your model sits in the Whirlpool, Kenmore, Roper, Estate or Crosley lists, and pick the blue or green spring for your capacity before you install.

Suits you if: you are restoring an older Whirlpool-family machine and want the clutch, coupling and agitator dog together.

skip it if: your machine is a newer Samsung, LG or GE model — these replacement numbers are aimed at a different generation of washer.

Best for GE Owners

5. Cykemo WH01X27954 Washer Lid Lock Switch Kit

3-Piece KitNo Special Tools

The three-piece set for a GE lid that will not lock — or will not let go.

A machine that refuses to start, or a lid that will not open and close properly, is often a dead lock switch rather than a dead washer. This kit ships three pieces — one WH01X27954 lid lock switch, one WH02X24399 striker and one WH01X24381 bezel — so you replace the whole assembly instead of guessing which bit failed. The kit weighs 3.2 ounces and the parts are described as heat-resistant, which matters when they sit near the tub.

Installation needs no special tools, and the listing is clear on the sequence: cut the power and put on work gloves before you start. The switch stands in for WH01X26114, WH01X24114, 290D1580P001, 290D1580P002, 290d1580p004 and eg380843m; the bezel for 4502680 and PS11736833; the striker for 4455158, AP5999576 and PS11729471. The GE and Hotpoint model list covers GTW460ASJ5WW, GTW460ASJ6WW, GTW460ASJ8WW, GTW335ASN1WW, GTW220ACK2WW, GTW220ACK3WW and GTW220ACKWW, plus the HTW240ASK1WS, HTW200ASK0WW and HTW240ASK6WS machines.

Functionality is the thing buyers talk up most, with one long run of 20+ cycles reported without a hiccup. The caveat is that a small minority find the switch does not last, so this is a fit-first purchase: confirm your GTW or HTW code and the lock is a quick, no-tool swap.

What it fixes: a lid that will not lock or release, and the no-start fault that comes with it, in one three-piece order.

Before you order: read the GTW or HTW code off your GE or Hotpoint machine — this kit is aimed squarely at that family.

Dead-on for: a GE or Hotpoint top loader whose lid lock has failed and whose model code appears in this listing.

Not the answer for: a Whirlpool or Samsung lid fault, or a machine that fails for a drain or spin reason rather than the lock.

Smartest Fix

6. Ben’s Appliances Bounce-B-Gone Suspension Grease Kit

50ml GreaseFoam Inserts

Restore the dampers with grease, before you spend on a full rod set.

This is the pick for a Whirlpool or Samsung owner whose rods are intact but whose drum still shakes. Bounce-B-Gone is a 50ml jar of kinematic grease, plus four white EVA foam pieces for Whirlpool and four red EVA foam pieces for Samsung, a wooden applicator stick and an instruction card. The listing’s logic is sound: often the rods are fine and the dampening system has degraded from years of use or overloading, and fresh grease restores the damping rods to what the maker calls factory or beyond-factory quality.

Owners back that up loudly. It is the most-discussed fix in this group, and the grease draws the largest share of positive feedback by far — machines that shook across the floor settle down after the application. Ease of use scores well too: you apply the grease and swap the foam inserts, and it is a fraction of the cost of new OEM rods. The kit weighs 3.52 ounces and covers both Whirlpool and Samsung, so the foam inserts suit either brand.

The catch is the grease itself. A share of buyers find it thick and tacky, which makes the first application a little messy, and the foam inserts read mixed for some. It also carries a 6-month warranty, so this is a maintenance fix rather than a permanent rod replacement. If the rods are physically broken, spend on the rod kit instead.

What makes it worth trying: a 50ml jar and the right foam inserts for both Whirlpool and Samsung, aimed at the damping system rather than a full rod replacement.

The catch to expect: thick, tacky grease takes a steady hand to apply, and if the rods are already broken this grease will not rescue them.

Try this first if: your Whirlpool or Samsung shakes but the rods are intact and you want the low-cost damping fix before buying hardware.

Go straight to rods if: a rod is cracked or snapped — grease cannot rebuild a broken bar.

Premium Pick

7. Pulluty DC97-16350U Upgraded Washer Suspension Rods

Upgraded BuildFits Most Samsung

Four upgraded rods for the widest spread of Samsung top loaders in this group.

This set is built on upgraded materials that the listing calls wear-resistant, corrosion-resistant and slow to deform, and each one behaves as a shock absorber: the assembly swings on a ball and slides along the boom to soak up vibration energy from the drum. You get four DC97-16350U rods in the package, enough for a full suspension refresh on a Samsung top loader, and the box runs 27 x 3.75 x 3.75 inches.

The compatibility list is the reason to pick this over the other Samsung rod set. It names WA50R5200AW/US, WA50R5400AV/US, WA45T3200AW/A4, WA50R5400AW/US, WA400PJHDWR/AA, WA40J3000AW/A2, WA456DRHDSU/AA, WA45H7000AW/A2, WA45M7050AW/A4, WA45H7200AW/A2, WA45H7000AP/A2 and WA456DRHDWR/AA among many others. It replaces DC97-16350E, DC97-16350S, DC97-16350T, DC97-1635C and DC97-1635D, plus part numbers 3998024, AP5966911, EAP11719937 and PS11719937. The listing is upfront that this is not an OEM part, but it meets OEM manufacturing requirements.

Functionality and balance are what owners praise most — machines stop throwing out-of-balance faults and settle into a quiet spin. The catch is durability at the low end: while some report the rods lasting months, a portion break within a month and a half, so check your load size. If you want the widest model coverage, this is the set.

Why Samsung owners reach for it

  • Four upgraded rods that act as shock absorbers to cut vibration noise and keep the drum balanced
  • Very wide Samsung model coverage from the WA50, WA45 and WA400 series
  • Built to OEM manufacturing requirements with wear and corrosion resistance called out

What to keep in mind

  • Not an OEM part, so it is an aftermarket equivalent rather than a factory piece
  • Some rods are reported to break inside a month and a half — check load sizes after fitting
  • Compatibility is Samsung-only, so other brands will not cross to this set

Pick this when: your Samsung model code appears in its long compatibility list and you want a full four-rod refresh.

Keep looking if: your machine is a Whirlpool, GE or Kenmore — this set does not reach those models.

Best Drain Fix

8. Yendse WH23X28418 Drain Pump

Stainless Steel120V Pump

When the drum stays full of water, this pump is the part that gets it out.

A washer that will not drain, leaks or runs noisy cycles has usually lost its drain pump, and this GE and Hotpoint replacement is a direct answer. The motor runs on 120V, 60 Hz and 1.25A, and the harness and plug extend roughly 10 inches from the motor, so a front-load cabinet has the slack to route it. The build is stainless steel, which the listing says resists the water vapour inside the machine to hold off rust, cracks and leaks.

Functionality is what owners praise most, with washers running properly after install, and the fit scores strongly too — the listing names GE Profile machines among the models it suits. The replacement coverage is deep: it stands in for WH23X28418, 290D1201G003, B40-3A01, WH23X24178, B30-3A02, B30-3A01, 290D1201G001, 290D1201G002, 24052019, AP6889136, PS12723115, WH23X27574 and 4958182. The GE model list includes GTW335ASN1WW, GTW720BPN0DG, PTW905BPTDG, GTW460ASJ3WW and the HTW200ASK series.

The instal is a seven-step job the listing spells out, starting with cutting the power and turning off the hose. This part is not universal, so confirm your GE or Hotpoint code before you order — the 365-day return and replacement support covers you if a pump arrives damaged. Worth the mid-range spend to avoid pricing a new machine.

Where it stands out: stainless steel construction, a 120V motor with a 10-inch harness, and a 365-day return and replacement window.

Check before ordering: the part is not universal — match your GTW or HTW model code, and follow the power-off sequence the listing gives.

Right part if: your GE or Hotpoint front loader will not drain, leaks or pumps without spinning, and your model appears in the list.

Wrong part if: you run another brand, or the fault is a lid lock or suspension issue rather than the pump.

Genuine OEM

9. GE WH43X30957 Washer Agitator Assembly

Authentic OEMGE and Hotpoint

The factory GE agitator for a top loader that has stopped moving clothes.

This is the premium pick, and it is premium for one reason: it is a genuine Original Equipment Manufacturer part from General Electric, not an aftermarket copy. The agitator rotates back and forth to move clothes inside the tub, which is the whole point of the part — if it fails, your load just sits there. It fits various GE and Hotpoint models, and it replaces WH43X25304 and WH43X26845, so older machines get a current replacement.

Quality and authenticity are what buyers confirm most, and the fit for the listed GE and Hotpoint models is the reason people pay the higher price here. The listing is clear that the part may look different from the one you pull out, but it is a functional equivalent. It also recommends checking your appliance service manual or contacting GE before you buy, which is the right habit on an OEM part where the code has to line up exactly.

Durability reads mixed — a portion of owners find the splines wear out over time, so treat this as a wear part rather than a permanent fix. If your GE top loader’s agitator has stopped turning, this is the part that brings the movement back. Confirm your model number first and the swap is straightforward.

The reason to pay more: a genuine GE OEM agitator that matches factory specs and replaces WH43X25304 and WH43X26845.

The honest limit: the splines can wear out over time, so this is a part you may revisit — check the code against your manual before ordering.

Choose it for: a GE or Hotpoint top loader whose agitator has quit moving clothes and where you want the genuine factory part.

Consider an alternative if: you want the lowest-cost fix — this is the OEM option, and the price reflects that.

Know the Specs

Part Type and Symptom

Suspension rods hold and dampen the drum; a drive hub turns the basket; a lid lock switch tells the machine the door is shut; a drain pump empties the water; an agitator moves the clothes. Match the symptom to the part and you skip the guesswork. A shake is rods, a full drum is the pump, a no-start is the lock.

Replacement Part Numbers

Every listing prints a long list of codes it replaces, and that list is the real spec to check. Find your model code on the machine, then look for the matching replacement number — for example DC97-16350U on the Samsung rods or WH23X28418 on the GE pump. A match here beats brand loyalty every time.

Common Questions

How do I find my washer model number before I buy a part?
Look on a sticker inside the door, on the back panel, or under the lid. It is usually a code like WA50R5200AW/US, WTW5000DW1 or GTW460ASJ5WW. Every listing here prints the codes it replaces and the models it fits, so match your code to that list before ordering.
Can I use aftermarket suspension rods instead of OEM ones?
Yes, and the listing for the Pulluty rods says plainly that it is not OEM but meets OEM manufacturing requirements. Aftermarket sets often cover a wider range of models and cost less than dealer parts. Check that the part number and length match — the APPLIANCEMATES rods run roughly 26.18 inches each.
Why does my washer shake across the floor during the spin cycle?
Usually the suspension rods or the dampening system. If the rods are intact, the Bounce-B-Gone grease kit restores the damping system; if a rod is cracked or snapped, a full four-rod set like the APPLIANCEMATES or Pulluty kit replaces it. Check the rods for physical damage first.
What does the DC error code on a Samsung washer mean?
On a Samsung top loader it often points to an unbalanced load or a suspension fault, and replacing the four suspension rods usually corrects the imbalance. Check the load is not bunched on one side first, then look at the rods if the code keeps coming back.
How long should a washer drain pump last?
It varies with use, and this is not a maintenance-free part — a clogged filter or debris can cut a pump’s life short. The Yendse pump comes with 365-day return and replacement support, so check your model and fit before ordering. Clean the filter regularly to avoid repeats.
Do I need a special tool to replace the tub nut?
On many GE and Whirlpool machines, yes — the inner tub lock nut needs a spanner wrench to break it loose. The AMI PARTS TB123A is a 1-11/16 inch tub nut wrench built for that job. Confirm your nut size, because the wrench runs about 1/3 inch too large for some tubs.
What is the difference between a drive hub and a clutch kit?
The drive hub (like the Popbee W10528947 kit) transfers drive to the basket so it turns, and the clutch kit (part of the Seentech set) controls spin engagement. If the basket turns freely but clothes stay still, suspect the hub; if the spin is weak, suspect the clutch.
Why will my GE washer not start or open?
A failed lid lock switch is a common cause of a GE or Hotpoint top loader refusing to start or release the lid. The Cykemo 3-piece kit replaces the switch, striker and bezel together, and installs with no special tools after you cut the power.
Is it safe to install these parts myself?
Most here are designed for a DIY swap, and the listings say so. Always cut the power and shut off the water before you start, and wear gloves. The drain pump and lid lock listings give a step-by-step sequence, so follow it rather than working from memory.
What parts wear out first on a top load washer?
The suspension rods, the lid lock, the drain pump and the drive hub are common wear items, along with the agitator and clutch on older Whirlpool-family machines. Matching the symptom to the part — shake, no-drain, no-start, no-spin — is the fastest way to pick the right replacement.

The Bottom Line

If your Samsung top loader is shaking, banging or throwing a “DC” code, the APPLIANCEMATES suspension rod kit is the place to start — four stainless rods, a 5-year return window and the strongest value for the fix. Want the widest Samsung model coverage? Grab the Pulluty DC97-16350U rods. And if the shaking is mild and the rods are still intact, try the Bounce-B-Gone grease kit first — it costs far less and restores a degraded damping system before you buy new hardware. Match the model code on your washer’s sticker, and the repair is one order away.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top