How to Measure for a Widespread Bathroom Faucet (Center-to-Center Spacing)? | Center-to-Center Rule

Measure from the center of the left handle hole to the center of the right handle hole—not the outer edges—and confirm the new faucet’s listed install range covers that number.

Getting the tape in the wrong place is the mistake that sends a brand-new faucet back to the store. Widespread faucets sit on three separate holes—left handle, spout, right handle—and the only number that matters for fit is the distance between the two handle centers. Measure it once, write it down to the nearest 1/8 inch, and the whole purchase stops being a gamble.

Where Do You Actually Put The Tape?

Start at the center of the left handle hole and end at the center of the right handle hole, running the tape straight across the back of the sink deck.

  • Trim on: use the centerline of each valve stem or mounting shank.
  • Trim off: if the holes are round, measure across each one and mark the midpoint.
  • Spout hole: measure its diameter separately—center spacing alone says nothing about hole-size fit.
  • Record it: note the number in inches to the nearest 1/8 inch before you shop.

Outside-edge-to-outside-edge measuring, or measuring spout center to one handle, produces a number that fits nothing. Those two errors account for most of the returns on this job.

Does “8-Inch Widespread” Mean Exactly 8 Inches?

No—widespread is a style label, not a fixed dimension, and current specs prove it. Delta lists models built for 3-hole 4–16-inch installations, others for 3-hole 6–16-inch, and one for 3-hole 8–16-inch, so two 8-inch faucets can accept very different spacing. Model 3574-CSMPU-DST, for instance, lets the handles sit anywhere between 8 and 16 inches apart.

That means your measured number has to fall inside the specific model’s published range. Two faucets with the same nominal label can bracket your sink very differently.

Faucet Model Published Install Range Other Specs Worth Knowing
3599LF-BLMPU 3-hole, 8–16 inches 3/8-inch compression fittings, ceramic valve, 5-1/2-inch overall height
3574-CSMPU-DST Handles 8–16 inches apart Adjustable handle placement across the full range
3532LF-BLMPU-R (recertified) 3-hole widespread Everything included except supply lines
Model rated 3-hole 6–16 inches 6–16 inches More forgiving on narrower decks
Model rated 3-hole 4–16 inches 4–16 inches Widest published flexibility
Typical 8-inch-label faucet Varies by model Label is not the acceptance range

What Else Can Sink The Install?

Spacing is the headline number, but four other checks decide whether the faucet actually goes on. Run them before you buy, not after the box is open.

  • Backsplash clearance: Delta recommends at least 2-1/2 inches for several models, so tall faucets or deep decks can foul the wall.
  • Handle interference: confirm the handles clear the backsplash, mirror, medicine cabinet, and basin rim.
  • Spout reach: the spout must land centered over the basin, not behind it.
  • What’s in the box: the recertified 3532LF-BLMPU-R page states everything is included except supply lines—assume nothing about rough-in parts.
  • Deck thickness and connections: match supply-line fittings and valve arrangement to what’s under your sink.

Last, don’t confuse a bathroom widespread with a tub filler. Those are different products with different ranges and connections, and drilling or relocating holes without checking countertop limitations can crack stone outright. Shut the water off first, protect your eyes if you drill, and follow the model’s install guide. When you’re ready to compare faucets that fit your measured number, this roundup of tested widespread bathroom faucets narrows the field fast. Delta’s own product pages, like the 3599LF-BLMPU spec sheet, list the exact install range to check against.

Common Questions

Can I measure spacing with the old faucet still installed?

Yes, as long as you measure to the centerline of each valve stem or mounting shank rather than the handle edges. For a truly reliable number—especially if you plan to change styles—pull the trim so the actual holes are visible, then mark each hole’s midpoint and measure between those marks.

What if my sink has only one hole or two holes?

A widespread faucet needs three separate holes to mount, so a single-hole or two-hole deck won’t accept one without drilling or a deck plate adapter. Confirm the hole count and diameters before ordering, and don’t enlarge holes until you’ve checked what the countertop or sink material can take.

Do all widespread faucets include supply lines?

No. The recertified 3532LF-BLMPU-R page explicitly states everything is included except supply lines, and that’s common across the category. Read the included-parts list on the exact model you’re buying and add lines to your order if they’re missing—otherwise you’ll stall mid-installation.

Sources

Scroll to Top