Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Buying a Whirlpool refrigerator accessory is mostly a matching puzzle, not a shopping spree. The wrong filter or bin looks almost identical to the right one, and it either won’t click into place or won’t sit flush. This guide sorts the real Whirlpool-fit parts — water filters, door bins, glass shelves, crisper drawers — by what they actually replace and who they suit. You’ll see which ones are genuine Whirlpool parts and which are certified compatible replacements, so you can pick with your model number in hand.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every part here is built for a Whirlpool-family fridge, but the details decide the fit. Read the specs first, then confirm your model plaque before ordering any of these Whirlpool refrigerator accessories.
Top Picks



How To Choose The Best Whirlpool Refrigerator Accessories
The single biggest mistake with Whirlpool refrigerator accessories is buying by brand name alone. Whirlpool builds fridges with several different filter sockets, bin shapes, and shelf sizes across its model lines. A part that says “for Whirlpool” can still be the wrong part for your specific cabinet. Start with your model number, then match the part.
Find your model plaque before anything else
Open the fridge and look for a plaque with the word “MOD” or “Model” next to a code. That code is the key to every accessory on this list. If a listing’s compatibility list doesn’t include your code, the part will not fit — even if the measurements look close on paper. Skipping this check is the most common reason these parts get returned.
Genuine versus certified compatible filters
A genuine filter is made by Whirlpool for its own fridges. A compatible filter is made by a third party to fit the same socket, and the good ones carry their own NSF certification. Genuine parts cost more and remove the guesswork. Compatible parts cost less and can work well, but the certification is what separates a real filter from a plastic shell with carbon inside.
Match the filter color and number
everydrop filters are color-coded — Filter 1 is purple, Filter 4 is green — and each number fits a different socket. A Filter 1 will not drop into a fridge that takes a Filter 4. Check the number and color on the old filter before you order, then confirm the replacement carries the same code.
Measure bins and shelves against the old part
Door bins and glass shelves are not universal. A crisper bin has a front length, a back length, a depth, and a height, and the drawer only slides if all four are right. Glass shelves need the right width and depth to sit on the rails. Keep the broken part until the new one arrives so you can compare side by side.
Side-by-Side Comparison
| Model | Best For | Type | Key Spec | Certification | Amazon |
|---|---|---|---|---|---|
| everydrop EDR1RXD1 (Purple)★ Best Overall | Genuine Filter 1 replacement | Water filter | 8.69″H, Filter 1 | NSF 42, 53, 401 | Amazon |
| MARRIOTTO EDR1RXD1 CompatibleBudget Swap | Budget Filter 1 swap | Water filter | 7.13″D, Filter 1 fit | NSF | Amazon |
| Waterspecialist UKF8001 3-PackBest Multi-Pack | Multi-pack Filter 4 replacement | Water filter | 3-pack, 7.09″D | NSF 42/372 | Amazon |
| WPW10321304 Door Bin (2-Pack) | Cracked door shelf fix | Door bin | 15 x 6.7 x 3.5 in | — | Amazon |
| W11188040 Glass Shelf | Upper shelf replacement | Glass shelf | 17-5/16″ wide, 3mm tempered | — | Amazon |
| Lifetime Appliance 2188656 Crisper Bin | Upper crisper drawer fix | Crisper bin | 16-1/2″ front, 7-5/8″H | — | Amazon |
| Whirlpool WHR2RXD1 Filter 2 | Genuine Filter 2 replacement | Water filter | 8.69″H, Filter 2 | NSF 42, 53 | Amazon |
| everydrop EDR4RXD1 (Green) | Genuine Filter 4 replacement | Water filter | 8″H, 9.6 oz | NSF 42, 53, 401 | Amazon |
| Whirlpool WHR4RXD1 Filter 4 | Genuine Filter 4, current model | Water filter | 2.63″D x 3″W x 9.4″H | NSF | Amazon |
Detailed Reviews
1. everydrop by Whirlpool Filter 1 EDR1RXD1
Our pick — 4.5+★ from 109,500+ verified ratings; the strongest balance of quality and price.
Three NSF certifications and a filter built by the people who built your fridge.
If your fridge takes a Filter 1 socket and you want zero guesswork, this is the one to buy. It carries all three of the certifications that matter here — NSF 42 for the taste-and-odor impurities, NSF 53 for contaminants with health effects, and NSF 401 for a set of emerging contaminants. Most generic filters on this shelf stop at one. That third standard is the reason this part sits at the top of the list, and the rating backs it up: 4.5+ stars across 109,000+ reviews.
The cartridge stands 8.69 inches tall in a 2.5-inch square body, so it drops into the door tower and pushes straight in with no twisting. The core is activated carbon made from coconut shells, and the multi-stage filtration runs in three passes — large particles first, then finer micro-filtration, then absorption of the smallest materials. It’s rated for a six-month change or every 200 gallons, whichever lands first. Genuine Whirlpool parts carry a real reason to stay genuine: the maker warns that non-genuine filters may cause damage to the refrigerator.
What wins people over is how ordinary the whole job is — pull the old cartridge, push the new one home, flush it, and the water tastes the way it did the day the fridge arrived. There is one trap worth naming: this is a purple Filter 1, and a Filter 4 fridge will not accept it no matter how similar the two look on the shelf. Match the color and number before you order. Sizing note for the shelf-shoppers — this one measures 8.69 inches tall, so it is a full-length cartridge rather than a compact stub.
What earns it the top spot
- Certified to NSF 42, 53, and 401 — three standards, not one
- Genuine Whirlpool part, so it protects the fridge warranty
- Push-in installation with no tools and no twisting
- Six-month or 200-gallon replacement schedule is easy to remember
Where it asks you to check twice
- Only fits the Filter 1 socket — a Filter 4 fridge cannot use it
- The premium genuine price is real; certified compatible filters cost less
- Needs a flush after install before the water tastes clean again
Built for: anyone who wants the genuine part with the widest certification coverage and no fit anxiety.
Double-check first: the socket number and color on your old filter — purple Filter 1 only.
2. MARRIOTTO EDR1RXD1 Water Filter 1 Pack
The compatible Filter 1 that costs a fraction and fits the same socket.
A compatible filter makes sense when you’re replacing every six months and want to spend like it. MARRIOTTO builds to the Filter 1 pattern — the same socket as the everydrop EDR1RXD1 — and lists a long compatibility chain that includes W10295370A, EDR1RXD1B, WHR1RXD1, KAD1RXD1, P4RFWB, 46-9081, and 46-9930. The dimensions tell a very different story from the genuine part, though. This cartridge measures 1.79 inches in height against the everydrop’s 8.69 inches, a real shape difference you’ll see the moment you open the box.
The filtration core is a coconut shell carbon block, and the maker rates it for the same six-month or 200-gallon cycle as the original. The certification is listed simply as NSF, which is worth reading as a narrower claim than the everydrop’s three named standards. That is the honest trade here: you’re paying a compatible-filter price for a compatible-filter certification. For clean, fresh-tasting water on a six-month rhythm, that’s a sensible swap. For the widest contaminant coverage, the genuine part stays ahead.
The seat is where this filter either makes friends or doesn’t. It fits the Filter 1 socket, but the shorter body means it seats into different fridge plumbing than the tall original, so confirm your model is on the compatibility list before ordering. One more thing the maker emphasizes: a correctly seated compatible filter poses no water-damage risk, and that’s the whole reason to buy from a brand with a real support line rather than an anonymous listing. The 24/7 team is listed as part of the deal.
What it is: a budget-friendly Filter 1 compatible cartridge with a coconut shell carbon core and a six-month service life.
The honest trade: it saves real money and matches the socket, but the certification is narrower and the body is much shorter than the genuine part — the fit is the thing to verify.
Reach for this if: your fridge takes Filter 1 and you want a lower-cost replacement on a regular six-month schedule.
Look elsewhere if: you want the broadest certification coverage — that’s the everydrop above.
3. Waterspecialist UKF8001 Water Filter 3 Pack
Three filters in the box so you never hit a dry dispenser mid-year.
Buying three at once is a small act of planning that pays off at 11 p.m. when the change indicator lights up and you’d rather not order a refill. The Waterspecialist pack covers the UKF8001 pattern, which cross-references to everydrop Filter 4, EDR4RXD1, Whirlpool 4396395, and a long list of Maytag, KitchenAid, Jenn-Air, and Kenmore part numbers. One pack measures 7.09 inches deep by 2.32 inches wide by 8.03 inches tall.
The filter housing is lead-free and food-grade, and it carries NSF 42/372 — the 42 standard for taste and odor, the 372 standard for lead-free materials. The carbon is natural coconut shell block, chosen for a larger surface area than the cheaper carbon used in bargain filters. It’s rated to reduce chlorine, odor, heavy metals, and a set of other impurities, tested through an independent lab. Installation is tool-free, and the maker specifies a flush of five minutes at 0.5 gpm (about 2.5 gallons) to clear the lines before you drink from it.
Functionality is what wins people over here — it does the job of a Filter 4 in home and vacation fridges and reads as good as the original brand in the pages of owner feedback. Value runs a close second, which is the whole point of a three-pack. The one recurring gripe is water flow: some installations get a weaker stream than before, so if you like a fast pour, keep an eye on the pressure after the swap. Filtration and fit are this three-pack’s strong suits.
Where the value sits: three UKF8001 filters, lead-free food-grade housing, and NSF 42/372 certification in one box.
The catch: flow rate is the mixed note in this pack — taste and fit are the wins, but a slow pour is a real possibility depending on your fridge.
Who it suits: UKF8001 and Filter 4 households that would rather stock up than scramble for a refill.
Consider a single instead if: you want the widest certification coverage — this pack names NSF 42 and 372.
4. WPW10321304 Refrigerator Door Bin
Two bins and a can organizer for the shelf that finally cracked under the gallon jug.
Door bins break in a very specific way — the bottom rail snaps and suddenly every bottle wants to slide out. This replacement measures 15 inches long by 6.7 inches wide by 3.5 inches deep, which is the footprint you should hold next to your broken bin before ordering. It cross-references WPW10321304, W10321304, AP6019471, PS11752778, and a long run of other part numbers, and it fits Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Inglis cabinets.
You get two bins in the box plus a soda can organizer, so a single order can rebuild both sides of the door. The plastic is described as built for daily load, with a bearing capacity pitched at bottles and jars rather than light items. That said, the part number on the bin isn’t the whole story — the fridge part number is. If you find your shelf on the compatibility list, the fit is clean; if you don’t, the measurements can look right and still be wrong.
If your door shelf is a cracked WPW10321304 bin, this two-pack replaces it and leaves a spare for the other side. The catch is compatibility — you need to confirm your model, and Whirlpool’s compatibility list for this part is long but specific. Measure the original and check the model plaque; skip the guesswork.
The rebuild case
- Two bins per order means both door shelves get fixed together
- 15 x 6.7 x 3.5 inch build matches the original WPW10321304 footprint
- Soda can organizer adds a dedicated spot for cans
- Listed for a full year of warranty coverage
Before you order
- Fits only the models on the compatibility list — not universal
- The two-bin kit is more than a single-bin household needs
Pick this for: a broken or bowing WPW10321304 door shelf in need of a drop-in replacement.
skip it if: your fridge takes a different bin part number — this one only covers WPW10321304.
5. W11188040 Refrigerator Upper Glass Shelf
A sheet of tempered glass that puts the top shelf back the way the factory built it.
A cracked top shelf is one of those problems that changes how you shop every week — suddenly nothing has a home. This replacement is built from 9H tempered glass at 3mm thick, which is the hard-rated glass used for load-bearing shelves rather than thin display panes. Food-grade certification is listed as part of the build. Width and depth are the numbers to measure against: 17-5/16 inches wide and 16-3/8 inches deep, which are the upper-shelf dimensions for the listed models.
The compatibility list is where this part earns its keep. It covers Whirlpool WRF532SMYB, WRF535SMBM, WRF836SDM, and WRF754RDBM, plus Maytag and KitchenAid models and Ikea’s HFN 302 line. It replaces W11135529, 4547258, PS12348757, and AP6286990 among others. The edge treatment matters here, too — a shelf that sits cleanly on the rails won’t wobble when you load it with a turkey. Get the width and depth right and the install is a matter of laying it in.
Fit is the thing everyone raves about with this shelf, and the real-world use that keeps coming back is RV fridges, where a dropped shelf is a nuisance and the exact-match replacement is welcome. Size is where opinions split: a few buyers report it runs a little bigger than the factory sheet, so measure the old shelf and your cabinet depth before committing. The look, once it’s in, is factory-correct — one of the reasons this part suits people who want the fridge to look untouched.
The strength: 9H tempered glass at 3mm in a factory-matched 17-5/16″ wide by 16-3/8″ deep footprint.
Watch out: the size is the one thing that draws mixed word-of-mouth — some say it’s slightly bigger than the original.
Best for: a Whirlpool, Maytag, KitchenAid, or Ikea fridge in the compatibility list with a broken upper glass shelf.
Check before buying: the W11188040 part number on your old shelf and the width of your cabinet opening.
6. Lifetime Appliance Parts 2188656 Crisper Bin
The upper crisper drawer — with the specific fit rule most buyers get wrong.
This is the UPPER crisper bin, part 2188656, and the lower bin is a different part entirely — 2188664. That one detail is the reason some buyers end up returning this drawer. The second rule is just as important: if the front trim of your current bin doesn’t have “Humidity Control” on it, this drawer will not fit your fridge. The measurements themselves are 16-1/2 inches at the front, 14-3/8 inches at the back, 14-7/8 inches deep, and 7-5/8 inches high — the tapered shape a crisper needs to slide on its rails.
The bin is built with a full one-year warranty and pitched as an OEM-matching replacement, not a close-enough lookalike. It cross-references 2188656, WP2188656, AP6006055, PS11739119, and a long list of others, so if you have the part number, you can match it confidently. The manufacturer prints a clear warning: the item is not universal, and if your fridge’s model-breakdown list doesn’t show this part number, it won’t fit — even with close measurements.
Fit is what’s praised most here — 115 of the counted buyer mentions land on how well this bin seats, with durability a distant second. Owners with older Whirlpool models call out the compatibility in particular. The weight of 5 pounds suggests a solid molded drawer rather than a flimsy shell. What keeps some people frustrated is not the part but the research: you have to look up your own model number and confirm the part appears. Do that and the drawer slides in; skip it and the drawer may not fit even if it looks right.
Why it earns the drawer slot
- Exact 2188656 upper-bin pattern with tapered crisper dimensions
- Full one-year warranty from a parts specialist
- Owners mention it seats cleanly and matches their original
The fit test you must run
- Upper bin only — the lower requires part 2188664
- Needs “Humidity Control” on your current bin’s trim
- Not universal; you must confirm on the model-breakdown list
Built for: Whirlpool and Kenmore fridges with a humidity-controlled upper crisper bin that’s worn or cracked.
Not the one if: your bin lacks the humidity-control trim or you need the lower drawer.
7. Whirlpool Ice & Water Filter 2 WHR2RXD1
The genuine Filter 2, made by the people who built the fridge it goes into.
If your fridge takes a Filter 2, the genuine WHR2RXD1 is the part built for that socket. It carries NSF 42 and NSF 53 (two independent filter standards: one for taste and odor, one for contaminants with health effects). The maker lists it as certified to reduce 70 contaminants, 99% of lead, and up to 97% of chlorine. The cartridge measures 8.69 inches tall in a 2.5-inch square, so it matches the Filter 1 size but not the Filter 1 socket. Swap it every six months and you never get caught out.
Fit is the part of this filter that owners praise, alongside the fresher-tasting water that comes out of it. The genuine status matters because Whirlpool flags that non-genuine filters may damage the appliance — the warranty conversation is short when the part is the maker’s own. It’s a single-pack, so you order one when the change indicator asks for one.
The thing to know before you buy is about filter life. Reviews are mixed on how long this filter lasts — some owners get months of service, others find it runs out sooner than the six-month mark implies. That isn’t a defect, but it is a reason to note the date when you install it and watch the flow. If you’re a heavy water-and-ice user, be ready to replace ahead of schedule. The water quality and the fit are the reasons people stay with the genuine part.
What you get: a genuine Filter 2 with NSF 42 and 53 certification, a 70-contaminant claim, and a six-month replacement rhythm.
What to watch: filter life draws mixed word-of-mouth — plan for a shorter run if your household dispenses a lot.
Reach for this if: your Whirlpool or KitchenAid fridge takes a Filter 2 and you want the genuine part.
Look elsewhere if: your socket is for Filter 1 or Filter 4 — this cartridge doesn’t swap between them.
8. everydrop by Whirlpool Filter 4 EDR4RXD1
Green cap, three certifications, and the genuine Filter 4 for a Whirlpool cabinet.
The green cap tells you this is Filter 4 in the everydrop family. It carries all three NSF standards — 42, 53, and 401 — and the manufacturer claims certification to reduce 99% of microplastics, including particles many times smaller than a grain of sand. Please don’t read that as a number you can measure at home. What matters for shopping is that this is certified to three standards when many compatible filters stop at one. The cartridge weighs 9.6 ounces and measures 2.5 inches square by 8 inches tall.
This is the twist-in version of the everydrop design: you line up the cap, twist to seat the cartridge, and you’re done. The coconut shell carbon core runs three stages of filtration, and the certification set covers microplastics, heavy metals, and pesticide-type contaminants. The manufacturer warns that non-genuine filters may damage the refrigerator, which is the honest case for buying the maker’s own part in this socket.
The 4.5+ star average and 41,000+ reviews make this one of the best-established parts on the list. The catch is the price of going genuine: certified compatible Filter 4 filters exist and cost less. That’s a real trade on a part you replace twice a year. If cost matters, the Waterspecialist three-pack covers the same UKF8001 and Filter 4 pattern for less; if certification breadth and the genuine fit are what you want, this is the one. Just confirm green on the old cartridge.
Why owners keep coming back
- Certified to NSF 42, 53, and 401 in one cartridge
- Genuine Whirlpool part with a twist-in fit
- Three-stage coconut shell carbon filtration
- Six-month or 200-gallon replacement cycle
What to weigh first
- Genuine pricing runs higher than compatible Filter 4 options
- Filter 4 only — a Filter 1 or Filter 2 fridge can’t use it
- The manufacturer’s specific contaminant claims are their own certified marketing
The one for: a Whirlpool, Maytag, KitchenAid, Amana, or JennAir fridge with a green Filter 4 socket.
The alternative: the Waterspecialist three-pack if you want to save on a compatible Filter 4 replacement.
9. Whirlpool Ice & Water Filter 4 WHR4RXD1
The current Whirlpool-labeled Filter 4, for anyone who wants the name on the box.
This model, WHR4RXD1, is the Whirlpool-labeled twin of the everydrop Filter 4 above. Both are Filter 4 parts, and both take the green socket. The differences show up on the spec sheet: this WHR4RXD1 measures 2.63 inches deep by 3 inches wide by 9.4 inches tall and weighs 10.4 ounces, while the everydrop EDR4RXD1 comes in at 2.5 inches square by 8 inches tall at 9.6 ounces. The Whirlpool-labeled one is a hair bigger in every direction. If depth is tight behind the door, that small difference decides whether it fits.
Whirlpool lists this as certified to reduce 31 contaminants including lead, pesticides, and pharmaceuticals, with the same six-month replacement advice. It’s a genuine Whirlpool part, made for KitchenAid fridges per the product copy, and cross-fits the same Whirlpool models. The other dimensions — the weight of 10.4 ounces, the 9.4-inch height — are why it feels a bit heftier in the hand than the everydrop version.
Owners rate filter quality most highly here, with water flow a close second — it keeps a steady stream and the install is a straightforward drop-in. The water tastes clean and fresh, and it’s a name people stick with once they’ve had it. The honest caveat is straightforward: this and the everydrop Filter 4 are the same family, so buying both would be redundant. Pick one — the one whose dimensions match your filter bay. The 9.4-inch height is the detail to check if your door tower is snug.
Its edge: Whirlpool-labeled Filter 4 with NSF certification, a 31-contaminant claim, and solid owner satisfaction on filter quality and water flow.
The overlap: it’s the same Filter 4 socket as the everydrop green cap — buy one, not both.
Best for: a Filter 4 fridge where you want the Whirlpool name and the deeper 9.4-inch cartridge.
Think twice if: your filter bay is tight — the everydrop Filter 4 above is shorter and narrower.
Know the Specs
NSF certification numbers explained
NSF is an independent body that tests filters against published standards. NSF 42 covers taste-and-odor impurities like chlorine. NSF 53 covers contaminants with health effects, including lead and some heavy metals. NSF 401 covers a set of emerging contaminants. A filter certified to NSF 42 alone does less than one certified to 42, 53, and 401. That’s why the genuine everydrop cartridges in this guide head the list — three standards instead of one. When a compatible filter just says “NSF,” ask which standard before you assume anything.
Filter color, number, and socket
everydrop numbers its filters and gives each one a color code — purple for Filter 1, green for Filter 4. The number and the color must match the cartridge that came out of your fridge. Whirlpool’s Filter 2 is a third socket entirely. These cartridges are not interchangeable: a Filter 1 won’t seat in a Filter 4 fridge. Look at your old filter, note the number on the cap, and match it. If you’re buying a Whirlpool WHR-series filter, the “RXD1” suffix tells you the model line.
Bin and shelf measurements
A replacement bin or shelf only works if the measurements are close. For bins, check the length at the front, the length at the back, the depth, and the height — the crisper in this guide is 16-1/2″ at the front, 14-3/8″ at the back, 14-7/8″ deep, and 7-5/8″ high, and those taper values matter. For glass shelves, width and depth are the numbers: the W11188040 is 17-5/16″ wide and 16-3/8″ deep. If you can, set the old part beside the new one before you throw the old one out.
Genuine, compatible, and the warranty question
A genuine filter is made by Whirlpool for its own appliance. A compatible filter is a third-party part made to fit the same socket, and it may carry its own certification. Both appear in this guide, and both can work. What separates them is the manufacturer’s stance on non-genuine filters — everydrop and Whirlpool both warn that non-genuine filters may cause damage to the refrigerator. That’s the honest reason to spend more on a new one. If you choose a compatible filter, look for a named certification, not just the word “compatible.”
Common Questions
How do I know which Whirlpool water filter my refrigerator takes?
Are compatible filters as good as genuine Whirlpool filters?
How often should I replace a Whirlpool refrigerator water filter?
Why does my new filter pour more slowly than the old one?
Will the WPW10321304 door bin fit any Whirlpool fridge?
What is the difference between the upper and lower crisper bin?
Is the everydrop Filter 4 the same as the WHR4RXD1?
Can a glass shelf from one Whirlpool model fit another?
Do I need to flush a new refrigerator water filter before drinking?
Does a non-genuine filter void my Whirlpool warranty?
The Bottom Line
For most people, the whirlpool refrigerator accessories pick that earns its place at the top is the everydrop Filter 1 (Purple, EDR1RXD1), because it carries NSF 42, 53, and 401 in one cartridge and it’s the genuine part built for the Filter 1 socket. If your fridge takes a Filter 4 and you’d rather stock up than scramble, the Waterspecialist UKF8001 three-pack is the value move. And for the physical parts that break — the door bin, the glass shelf, the crisper drawer — match the part number before the price, because a close measurement is not a fit.
The genuine everydrop and Whirlpool filters here carry the tens of thousands of owner ratings, and that’s not an accident. Matching the model plaque before ordering prevents nearly every return on this page.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





