Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The real question with a replacement microwave filter is not which one is fanciest — it is which one slides into your exact hood slot without bending, rattling, or leaving a gap for grease to sneak past. Get the size and the part number right and a filter simply does its job for months. Get them wrong and you are stuck with a wobbling screen or a charcoal sheet that never seats properly. This list sorts the Whirlpool-compatible grease and charcoal filters by the things that actually decide a good fit: exact dimensions, part-number coverage, material, and how each one holds up once the cooking starts.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Most owners only learn their filter is done when the vent starts leaving a film on the cabinets. The picks below cover grease screens, charcoal sheets and combo packs so you can match the right one to your hood before that happens, and our picks for the Best Whirlpool Microwave Filters make the part-number match painless.
Top Picks



How To Choose The Best Whirlpool Microwave Filters
A microwave hood filter has one job: catch the grease and fumes your cooking throws off before they coat the vent fan and drift back into the room. The trick is that there is no universal size. A screen built for a standard over-the-range hood will not fit a low-profile model, and a charcoal sheet cut for one vent compartment can miss another by half an inch. So you start with fit, then decide which type of filter you actually need.
Start with your part number, not the picture
Your old filter usually has a stamped number on the frame — W10208631A, 6802A, WB06X10596, or 8206230A are common ones here. Write it down and match it. A listing that names your exact number is doing the heavy lifting for you. If your filter has no readable stamp, measure the old one across its longest and shortest sides before you order anything.
Know which filter you are replacing
Over-the-range hoods often use two. The aluminum mesh grease filter sits under the hood and traps oil; you can wash it and reuse it. The charcoal filter handles odors on recirculating (ductless) setups and is a swap-out part. Buying the wrong type leaves you with a filter that fits but does nothing for the problem you are trying to fix.
Treat the listed size as a guide
These are stamped metal and cut carbon sheets, so real-world sizing can drift a fraction from the spec. A screen listed at 6 inches wide can run slightly under, which is fine in a deep slot and annoying in a tight one. If your hood slot is snug, lean toward the pack whose stated dimensions match your old filter most closely.
Side-by-Side Comparison
| Model | Best For | Filter Type | Stated Size | Pack Count | Amazon |
|---|---|---|---|---|---|
| prime&swift W10208631A 2-Pack★ Best Overall | Best Overall | Aluminum grease | 6″ x 13″ | 2 | Amazon |
| Bagean 6802A ReplacementEditor’s Pick | Editor’s Pick | Aluminum mesh grease | 13.3″ x 5.9″ | 2 | Amazon |
| Fresh Headquarters Charcoal 2-PackLow-Profile Pick | Low-Profile Pick | Activated carbon | 10.25″ x 7.125″ | 2 | Amazon |
| NPWP WMH31017 Grease Filter | Single-Filter Buyers | Aluminum grease | 13″ x 6″ | 1 | Amazon |
| WZKO W10208631A 4-Pack | Multi-Pack Value | Aluminum grease | 12″ x 6″ | 4 | Amazon |
| Aolleteau Charcoal 4-Pack | Charcoal Bulk Buy | Activated carbon | — | 4 | Amazon |
| Bagean Grease + Charcoal Combo | Complete Kit | Aluminum + charcoal | 6″ x 13″ grease | 2 sets | Amazon |
Detailed Reviews
1. Microwave Grease Filter W10208631A 2 Pack
Our pick — 4.5+★ from 350+ verified ratings; the strongest balance of quality and price.
Two aluminum screens, one stamped part number, and the widest model list in this lineup.
If you own an over-the-range Whirlpool, Maytag or KitchenAid hood, this is the two-pack to start with. Each screen is built from aluminum — a stamped mesh that traps cooking grease before it reaches the vent fan — and carries the W10208631A part number, which is the number most of these hoods are built around. You get two screens, so you have a spare ready the moment you drop one in the sink to soak.
The compatibility list here is what earns it the top spot. The listing names Maytag models including MMV5208WS1, MMV6180WW and MMV4203WB, plus Whirlpool hoods like WMH31017FV, WMH53520AS and UMH1160. It also lists the numbers W10208631, W10208631A, W10208631RP, AP5617368 and PS3650910 as replacements. That is a long, specific roster rather than a vague “fits most” claim, and it is exactly what you want when you are ordering a part you will not see in person until it arrives.
What wins people over is the sense that these are genuinely well-made screens — quality is the aspect praised most here by a clear margin. Fit is close behind, and the pack is a genuine value. The one honest note: a handful of owners find the screen runs a touch short of the stated 6 inches, so if your hood slot is tight, measure your old filter before you commit. Each screen weighs 4.2 ounces, which is light enough that the aluminum stays easy to handle while you slide it into place.
Why this leads the list
- Long, specific compatibility roster covering Maytag, Whirlpool and KitchenAid hoods
- Replace numbers printed right on the listing so you can cross-check your old frame
- Two screens means a clean spare is always on the shelf
- Aluminum mesh rinses and re-seats without fuss
Worth knowing before you buy
- A few owners measure the screen slightly under the stated 6 inches
- Mesh needs a soak and scrub to keep it flowing freely
Pick this if: your hood uses the W10208631A grease filter and you want a dependable pair with a spare on hand.
Hold off if: your slot is unusually tight and you would rather confirm the exact width of your old screen first.
2. Microwave Filter 6802A 4393862 2-Pack
Built thicker than the standard screen, with a frame meant to hold its shape.
The standout spec is the mesh thickness: this screen is built thicker than the industry standard to catch more grease. The frame is reinforced to resist bending out of shape, so it keeps seating flat instead of curling at the corners after a few wash cycles. At 13.3 x 5.9 x 0.1 inches it is a hair bigger than the prime&swift’s stated 6 x 13 — and it covers the 6802A, 4393862 and GE, Maytag, Samsung and KitchenAid cross-compatibility in one go.
The trade-off is material thickness versus long-term toughness. Multiple buyers report the frame coming apart and the metal feeling very thin in hand. Compare that to the prime&swift above, where quality is the clear favorite, and you can see why this one is the value play rather than the longevity play. It is a good, cheap way to get a 6802A-compatible screen back in the hood today, but it is not the pick if you plan to wash and re-use the same screen for years.
On the plus side, it is genuinely easy to swap — the frame slides in without force, and it is far quicker to replace than to scrub an old one clean. If your microwave has been running with a clogged or missing screen, this gets the vent breathing again in about a minute. Just be realistic about the material when you set your expectations.
Value read: a strong option when you need a 6802A-compatible screen fast and do not want to pay a premium for it.
Reality check: the thin material means this is a replace-it-when-it-wears part, not a wash-and-keep-forever one.
Reach for it if: your hood takes the 6802A screen and you want a thicker-than-standard mesh on a budget.
Pass it over if: you want a frame that survives years of scrubbing — the prime&swift is the sturdier bet.
3. Activated Carbon Microwave Hood Filters 2-Pack
A carbon sheet cut precisely for Whirlpool’s low-profile hoods, with a spare in the box.
Low-profile Whirlpool models like the WML55011HS and WML75011HZ use a different filter setup than a standard over-the-range hood, and this sheet is engineered specifically for them. At 10.25 x 7.125 inches it is cut to match the original compartment, so it drops in without trimming. Compare that to the 13.3 x 5.9 inch grease screen in the Bagean above and you can see the size gap — these are not interchangeable, so match the model first.
The carbon does the odor work. Activated charcoal’s millions of micro-pores trap smoke, steam and strong cooking aromas like fish, bacon and garlic before they spread through the house. That makes it the right buy for a recirculating (ductless) setup, where air cycles back into the kitchen instead of venting outside. Each carbon sheet is rated for up to 30 days, so the two-pack covers roughly two months of cooking.
The recurring gripe is thickness — the sheet is thin, and owners notice it. Fit and quality, though, are what people rave about most, and the value of getting two sheets for what a single brand-name filter costs is the second big draw. As owners put it, it covers the entire space under the filter grate. This is a solid, American-made pick for a low-profile Whirlpool hood, as long as you accept a monthly swap.
The carbon advantage: real odor-trapping performance for recirculating hoods, in a sheet cut to fit the low-profile vent slot.
The honest caveat: thin carbon sheets are consumables — plan to replace them on the 30-day cycle rather than wash them.
Best matched to: owners of a WML55011HS or WML75011HZ low-profile Whirlpool hood who want odor control without tools.
Rethink it if: your hood vents outdoors — you likely need the grease screen, not a carbon sheet.
4. WMH31017HZ Grease Filter for Whirlpool
One screen, packed between two PVC plates so it arrives flat and ready to slide in.
Not everyone needs a multi-pack. If you have one hood and just want the right single screen, this WP_FT0 filter is sized at 13 x 6 inches and covers the WMH31017HZ, WMH31017AS, WMH32519HZ, WMH31017HS, WMH31017FS, WMH53521HZ and WMH53520CS models by name. It ships sandwiched between two PVC plates of the same size, which is a small thing that matters — it means the screen arrives flat instead of bent in the mail.
Owners come away happy with the build and the value here. Quality and value are the aspects people call out most, and it slides out the old filter and into place without fighting. It is a sturdy aluminum mesh screen that traps grease before it reaches the vent fan. The one wobble to know about is length: some find the size perfect while others report it running too long, and a few note the frame can bend slightly during installation. Measure your old filter if your slot is a tight one.
There is also a one-year warranty on the part, which is more than most filters on this list offer. That gives you a bit of backup if something goes wrong from the start.
Go for it if: you need exactly one grease screen for a named WMH31017 or WMH32519 Whirlpool model.
Look elsewhere if: you would rather have a spare in the cabinet — the multi-packs below make more sense.
5. 13″ x 6″ W10208631A Microwave Grease Filter Pack of 4
Four washable aluminum screens for the price of a couple of single filters.
Four screens is the whole pitch here, and it is a good one for a household that cooks hard. The WZKO filters are designed as a universal replacement for Whirlpool, Samsung, GE and LG microwave filters, and they are washable — soak them, scrub them, set them back to keep the hood running clean. Each screen is 6.4 ounces of aluminum, so they feel substantial in the hand, and the panel construction gives you a flat, even mesh face.
Fit is the thing owners praise most, with quality right behind. Multiple screens align with Whirlpool-made vent slots, which is exactly what you want from a universal replacement. With four in the box, you can rotate them — wash one, use another — and never cook without a screen in place. That rotation habit alone is reason enough to buy a multi-pack rather than a single.
One spec to check before you order: the listed dimension is 12″ L x 6″ W x 0.1″ thick, which is a touch shorter on the long side than the 13-inch framing most of these hoods use. Confirm that matches your old filter’s length. If it does, this is a smart, economical way to keep a Whirlpool or GE hood supplied for a long stretch.
What you get: four washable aluminum panels, so you can keep a clean one in the hood and a dirty one soaking.
Check first: the 12-inch listed length — confirm it matches your slot before you commit.
Worth grabbing if: you want a rotation of washable screens ready to go and your hood slot measures to a 12-inch length.
skip it if: your hood needs the full 13-inch length and you would rather not deal with an undersized fit.
6. 4 Pack Activated Charcoal Air Filters
Four pre-cut charcoal sheets for Whirlpool’s low-profile hoods, no trimming required.
If you own a low-profile Whirlpool or KitchenAid hood — the KMLS311, YKMLS311, YWML55011, WML55011 or WML75011 series — this four-pack keeps you stocked. The sheets come pre-cut, so they drop straight into the compartment without measuring or trimming. That matters because the carbon filter compartment in these models is a specific size, and a sheet that is off by a bit will either not seat or leave a gap.
Fit is the top point of praise here, with value close behind. Four sheets goes a long way for a household that cooks daily, and the carbon does its real job quiet and out of sight: trapping and suppressing strong cooking odors so the kitchen air stays comfortable after a heavy meal. Each sheet weighs 2.89 ounces, so it is a light part you handle without effort.
The main thing to know is that this is an odor filter, not a grease screen. It works in recirculating hoods, where air cycles back inside. If your hood vents outdoors, you need a grease screen like the prime&swift, not this. And because these sheets are consumable, buying four at once is the practical move for anyone who wants a fresh sheet on standby.
Why it fits the bill: pre-cut carbon sheets sized for the low-profile compartment, sold four at a time so you always have a fresh one ready.
What it will not do: it is not a grease filter — recirculating setups only, and it needs swapping rather than washing.
The right call for: low-profile Whirlpool and KitchenAid owners who run a recirculating hood and want odor control in bulk.
Not for you if: your hood vents outdoors or your problem is grease buildup, not smell.
7. Bagean Grease and Charcoal Combo Pack
One box that covers both filters — grease screen and charcoal sheet — for a full hood refresh.
Most hoods need two different filters, and this combo pack gives you both. The box pairs a W10208631A grease screen (5.78 x 12.91 inches) with an 8206230A activated charcoal filter (5.35 x 5.03 inches). If you are not sure which filter is due and want to replace both at once, this is the simplest way to do it. Quality is what wins people over here, and owners who have swapped out their old filters say these work as well or better than the originals.
The grease screen traps cooking oil, and the charcoal sheet absorbs odors — together they cover both halves of the ventilation job. The set replaces your existing stove fan filter and handles a Maytag or Whirlpool hood in one order. If your hood is on the fritz and you want a fresh start, this is the least fussy way to get there.
Check the part numbers before you buy, because both halves need to match your model. The grease side takes W10208631A, and the charcoal side takes 8206230A. If those numbers line up with your old filters, this is a tidy, complete answer. The one thing to accept is that charcoal is a consumable — you get two sets here, so you are covered for two swaps.
Why a combo makes sense
- Covers both filters in one order — grease screen and charcoal sheet in a single box
- Two complete sets so you get a second swap down the road
- Owners say it matches or beats the originals
- Aluminum and charcoal materials, so grease and odor are handled together
Before you commit
- Both part numbers must match your hood — check them first
- The charcoal half is a swap-out part, not washable
Go complete with: this set if you want to replace both the grease and charcoal filters in one move.
Buy separately instead if: only one of your two filters is due for a change.
Know the Specs
Part number versus size
A replacement filter is only as good as its match to your hood. The part number — W10208631A, 6802A, WB06X10596, 8206230A — tells you which hood or vent fan it was built to fit. The listed size tells you the physical footprint. Both matter. If the part number matches but the size runs a fraction off, you may face a snug or loose fit. That is why the first check is always your old filter’s stamped number and its measured length and width.
Grease screen versus charcoal sheet
An aluminum mesh grease screen sits under the hood and traps oil before it reaches the vent fan; you can wash it and re-use it. A charcoal filter is a carbon sheet that absorbs odors on recirculating setups, where air cycles back into the kitchen instead of venting outside. Some hoods use one, some use both. Buying the wrong type leaves the problem you are trying to solve untouched, so know which one your model calls for before you order.
Common Questions
How do I find the right filter for my Whirlpool microwave?
Does a Whirlpool grease filter fit other brands like GE or Maytag?
Can I wash a microwave grease filter and reuse it?
Why does my new grease filter seem a little short or long?
When should I replace a charcoal microwave filter instead of a grease screen?
How many filters come in a pack, and how often will I need a new one?
What is the difference between a grease filter and a charcoal filter?
Will a low-profile Whirlpool filter fit a standard over-the-range hood?
Is it safe to install a new microwave filter myself?
The Bottom Line
The winner for most Whirlpool hoods is the prime&swift W10208631A 2-Pack — a long, specific compatibility list, an aluminum build owners trust, and two screens so you always have a spare ready. If you want the sturdier, reinforced frame for a 6802A-compatible hood, the Bagean Replacement is the practical second. And for a low-profile Whirlpool model that needs odor control, grab the Fresh Headquarters Charcoal 2-Pack — it is cut to fit and ready to slide in. Start with your part number, match the size, and any of these will have your vent breathing clean again.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



