Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The fix is a small LED module that snaps in behind a clear cover, and matching the right part number to your Whirlpool model is the whole game. Get that right and you are done in minutes with basic hand tools.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
We will walk through part numbers, fit, brightness, and install depth so your freezer stops being a dark box. Read on to match the right whirlpool refrigerator led light module to your model.
Top Picks


How To Choose The Best Whirlpool Refrigerator LED Light Module
A fridge LED module is a sealed circuit board with LEDs on it, and choosing the right one starts with your model plate. The plate sits inside the fridge compartment, usually on a side wall or near the crisper drawer. Write down every character, because Whirlpool uses long alphanumeric model codes and one wrong digit changes the part.
Match the part number before anything else
Every module lists its replacement part numbers in the product description. Cross-check those numbers against the old part printed on the light you are pulling out. If the old board says W11527432 and the listing covers W11527432, you are in business. A listing that only mentions a similar number is not a match.
Know whether your lights are wired in series
Some Whirlpool fridges run three LEDs in series, meaning all three sit on one electrical chain. If one bulb fails, the chain breaks and none of the lights come on. That means buying just the ceiling module may not fix the problem. You may need all three modules to restore light.
Check the color temperature and mounting style
Color temperature is measured in Kelvin, and it tells you how cool or warm the light looks. A cooler rating like 8000 Kelvin reads bright and white, which helps you spot food at the back of a shelf. Mounting type matters too: cabinet mount, panel mount, and ceiling mount are physically different, so match the type to where the old module sat.
Side-by-Side Comparison
| Model | Best For | Part Numbers Covered | Mounting Type | Color Temp | Amazon |
|---|---|---|---|---|---|
| Upgraded W11048980★ Best Overall | WRQA59CNKZ owners | W11470191, W11455230, W11032355, W11032353 | Cabinet Mount | 8000 Kelvin | Amazon |
| 3-Pack W10843353 W10695459Most Versatile | Multi-model Whirlpool and Maytag fridges | W10843353, W10695459, W11126053, W10660728, W10279030, W11205083 | — | — | Amazon |
| New W10515058 | Budget single-light fix | WPW10515058, W10522611, W10465957, AP6022534 | Ceiling Mount | — | Amazon |
| W11048980 Assembly | Value pick for WRQA59CNKZ | W11470191, W11455230, W11032355, W11032353 | Panel Mount | 8000 Kelvin | Amazon |
| W11527432 Assy Module | WRF555SDFZ and WRX735SDHZ owners | W11527432, W11387579, W11333374, W11042554, W11245960 | — | — | Amazon |
| Obida W11527432 Module | Brightest 8-chip replacement | W11527432, W11387579, W11333374, W11042554, W11101384 | — | — | Amazon |
| 1 Pc W10515058 and 2 Pcs W10515057 | Full three-light overhaul | W10515058, W10515057 | Internal Mount | — | Amazon |
Detailed Reviews
1. W11048980 Refrigerator LED Light Assembly
Our pick — 4.5+★ from 150+ verified ratings; the strongest balance of quality and price.
The brightest-coolest module on this list, built to replace the whole light bar on a bottom-mount Whirlpool.
If your WRQA59CNKZ has gone dark, this is the direct replacement. It carries a color temperature of 8000 Kelvin, which reads as crisp white light rather than the yellow cast of an old incandescent. The housing is acrylic with an aluminum frame, and it mounts straight into the cabinet. The manufacturer also lists the exact cross-reference numbers: W11470191, W11455230, W11032355, and W11032353, so you can verify fit against your old board.
Tight fit is the thing buyers notice, and this module is designed to sit flush with no visible slots. Getting the old frame out takes care. A thin flat screwdriver or plastic pry bar works, but you must avoid scratching the surrounding plastic. Once the frame is free, a clear cover with two screws comes off front-first, and the LED board sits inside secured by a snap. The 4.5+ star rating across 100+ ratings suggests most buyers get the flush cabinet mount seated on the first try.
The honest caveat is the installation note itself: it warns you to protect surrounding surfaces. If you are rough with a pry tool, you can mark your fridge trim. That is not a defect in the light, it is the nature of flush-mounted plastic trim. If you have never pried a panel before, watch the install video first.
What earns the top spot
- 8000 Kelvin color temperature keeps food labels and shelves readable
- Acrylic and aluminum build with a 10 year manufacturer warranty
- Includes the LED assembly, installation manual, and a tool
- Flush cabinet mount matches the factory footprint
What to watch during install
- Prying the old frame out risks scuffing the trim if you rush
- Only fits the specific bottom-mount models listed, not all Whirlpool fridges
Reach for this if: you own a WRQA59CNKZ and want the brightest, whitest light with a long warranty behind it.
Look elsewhere if: your fridge model is not a bottom-mount Whirlpool or Kitchen-Aid listed in the compatibility list.
2. 3-Pack W10843353 W10695459 Refrigerator LED Light Module
Three boards in one box, covering a cross-reference list long enough to fit Whirlpool, Maytag, Kenmore, and Jenn-Air.
If you are unsure which of your fridge lights is dead, this three-pack lets you swap all of them in one go. Each board weighs 3.52 ounces and the pack ships as three separate modules. The compatibility list spans dozens of Whirlpool model codes starting with 3WSC19, KRMF606ESS00, MFX2876, WRF757, WRF767, and WRF954. It also covers Maytag models like MFT2976 and MSB26C4, plus Kenmore and Jenn-Air codes.
What makes this the versatile pick is the part number coverage. It replaces W10843353, W10695459, W11126053, W10660728, W10279030, and W11205083 in the same module. That breadth means you are less likely to order the wrong part, which is the biggest fear with fridge LEDs. The 4.5+ star rating across 100+ ratings backs the fit and function of this three-pack, though appearance gets mixed feedback.
The catch is one compatibility note from the listing itself. It flags that some buyers found it is not compatible with a specific W10843353 application, so verify your model code against the long compatibility list before ordering. The mixed appearance feedback is worth knowing too. If you care about the visual finish behind the lens, this may not match the factory look exactly.
Why it earns second place: a three-board pack with the widest part number cross-reference in this list. It solves the guessing game for multi-light Whirlpool fridges where more than one board has failed.
The trade to accept: appearance is the mixed spot, and the compatibility note means you should confirm your model code before checkout.
Best for: owners who want to replace multiple LEDs at once and cover several possible part numbers in a single order.
Skip if: you need a perfect cosmetic match behind a clear lens, since appearance feedback here is mixed.
3. New W10515058 for Whirlpool Refrigerator Light
The single ceiling module that solves most dead-fridge-light complaints, as long as one light is actually the problem.
This is the main LED that sits on the ceiling of the cooler section, and it covers a long list of Whirlpool models like WRS325FDAM02, WRS325FDAB02, and WRS322FDAB05. It also fits Kenmore codes starting with 106.4112. Part numbers replaced include WPW10515058, W10522611, W10465957, AP6022534, and PS11755867. The bulb base is GU5.3 and it mounts to the ceiling, matching where the factory main light sits.
The important thing to understand before buying is series wiring. Your fridge may have three LEDs: this ceiling light, one in the mid section of the cooler side, and one in the freezer side. If any one fails, all three go dark. This listing is upfront about it, and it even describes a test procedure using a connector labeled J2 and an F007 test board. If the new W10515058 still does not light, the fault is in one of the other two LEDs, model W10515057.
There is a real durability concern here that the positive signals do not erase. Function and easy installation dominate the feedback, and many buyers report replacing it in under five minutes. But a sizable cluster of durability feedback points the other way, and flickering also shows up. That means the budget price buys you a module that may not outlive the original. If longevity matters most, spend more on a premium pick.
The value read: a plug-in main ceiling light that handles most single-LED failures, with a 1 year warranty behind it. Replacement coverage is deep, from WPW10515058 to AP6022534, so most Whirlpool and Kenmore owners can match it.
The honest trade: durability feedback is the weak spot, and flickering issues appear in the mix. Treat this as a quick fix, not a permanent one.
Pick this when: only your ceiling light is out and you want the lowest-cost correct part for a Whirlpool or Kenmore.
Think twice if: you want the longest-lasting module, since durability is the recurring weak point here.
4. W11048980 Refrigerator LED Light Assembly WRQA59CNKZ
A shatter-resistant LED bar with a butter knife in the box, which tells you exactly how simple the swap is meant to be.
This is the same W11048980 footprint as our top pick, but it takes a panel-mount approach and adds a shatter-resistant rating on the light source. The color temperature is 8000 Kelvin, giving that cool white look for easy shelf reading. It replaces W11470191, W11455230, W11032355, and W11032353, and it fits the Whirlpool WRQA59CNKZ and Kitchen-Aid KRQC506MPS00 bottom-mount fridges. The acrylic body keeps the module light while the aluminum frame gives it structure.
Installation is the standout. The package includes a butter knife as the prying tool, and the manual plus online video guide walk you through it. Owners consistently report it goes in quickly, and the fit is flush against the original opening. The 4.5+ star rating across 100+ ratings makes this panel-mount module one of the highest-scored in this group, with installation and function driving the praise.
Here is the comparison that matters: this pick and the top pick are near twins on part number and color temperature, but this one carries the shatter-resistant label and the higher score. If the two are both compatible with your model, the shatter-resistant light source is the tie-breaker for anyone with kids or a hard-to-reach shelf. Do note that the prying still takes patience to avoid damaging surrounding trim.
Why buyers keep reordering it
- Shatter-resistant light source adds confidence near food
- Comes with a manual, a video guide, and a prying tool in the box
- 8000 Kelvin keeps the cold section bright and easy to scan
- 10 year manufacturer warranty backs the assembly
The small print
- Fits only the listed bottom-mount Whirlpool and Kitchen-Aid models
- Still a flush panel, so careless prying can mark the trim
Top of the pile for: WRQA59CNKZ owners who want the higher-scored, shatter-resistant version with everything needed in the box.
Not the one for: anyone whose fridge is not a listed bottom-mount model, or who needs a ceiling-mount module instead.
5. W11527432 Refrigerator LED Light Assy Module
Built for the WRF555 and WRX735 families, with a housing and panel that are made to survive a heavy-handed install.
The upgraded material is the story here. The housing is ABS, which the listing describes as malleable and unbreakable, and the light panel is fixed with nuts rather than adhesive. That means it will not peel or loosen over time the way a stuck-on panel might. It replaces W11527432, W11387579, W11333374, W11042554, W11101384, W11245960, and AP7014542, so the cross-reference is genuine and wide.
The fit list is long, covering WRF555SDFZ09, WRF555SDFZ11, WRF555SDFZ12, WRF555SDFZ15, WRF555SDHV04, WRX735SDHZ02, WRX735SDHZ03, WRX735SDHZ04, and WRX735SDHV06, along with Maytag MFI2570FEZ08 and several more. Installation is plug-and-play: you disconnect the cable, snap the new module in from back to front, and you are done. The item weighs 1.39 pounds, so it has real substance in the hand and is not a flimsy board.
The honest limit is that the feedback base is thinner than most picks here: 4.5+ stars from 30+ ratings. That means you are leaning more on the specs and the manufacturer warranty than on a long buyer track record. If you prefer a pick with a bigger review history behind it, the top pick offers more reassurance. This one is for buyers who want the heavier-duty housing and can live with a smaller review base.
The build advantage: ABS housing plus a panel fixed with nuts means the module is meant to hold up. Plug-and-play install keeps it simple for the WRF555 and WRX735 owners who need it.
The thing to accept: the track record is thin at 30+ ratings, so you are buying largely on specs and a 1 year warranty.
Worth a look for: WRF555 and WRX735 owners who want the most rugged housing and nut-secured panel with a plug-and-play swap.
Hold off if: you want a module with a large public track record, since this one has only 30+ ratings so far.
6. W11527432 W11387579 W11333374 Refrigerator Light Module
An eight-chip board that runs at 4.5 watts and 24 volts, aimed straight at dim or flickering fridge interiors.
The defining spec is the eight-chip LED design. Its eight-chip board delivers brighter, uniform light with no flicker, which directly targets the common complaint of a dim or dark fridge. It runs at 4.5 watts and 24 volts and uses a standard 5-pin connector, so it is plug and play with no wiring required. It replaces W11527432, W11387579, W11333374, W11042554, W11101384, W11245960, AP7014542, and PS16555201.
Fit-wise, it covers the Maytag MFI2570 series, Amana AFI2539, and Whirlpool WRF555 and WRX735 models. That is a lot of overlap with the other W11527432 module in this list, so the real difference is the eight-chip brightness and the 4.5+ star rating across 300+ ratings. The five-minute plug-and-play claim stands out too: remove the old module, seat the new one, and you are done.
There is one durability note to keep in mind. The feedback is overwhelmingly positive on installation, quality, and brightness, but a small concern surfaced about a flimsy tab that broke during installation. It is a minor, isolated point rather than a pattern, but it means you should seat the module gently instead of forcing it. If your fridge model matches the list, this is a strong upgrade over the original, and many describe it as brighter than the factory part.
Why the eight-chip board stands out
- Eight-chip design targets dim and flickering fridge lighting
- 4.5 watts and 24 volts with a standard 5-pin, tool-free connector
- Covers Maytag, Amana, and Whirlpool model families
Care points
- A tab can snap if you force the module into place
- Brightness upgrade means verifying your model is on the compatibility list first
Go for this if: your old board was dim or flickering and you want the eight-chip brightness upgrade with a proven install path.
Pass if: your model is not on the Maytag, Amana, or Whirlpool compatibility lists, or you prefer a module with a lighter housing.
7. W10515058 & W10515057 Refrigerator Light Replacement
All three lights in one box for series-wired fridges, coated to shrug off moisture and temperature swings.
If your fridge runs three LEDs in series, this is the complete fix rather than a partial one. You get one W10515058 for the ceiling, plus two W10515057 boards for the rear panel of the cooler and freezer sections. The listing is direct about it: replacing all three boards at once avoids the short-circuit cycle that leaves you buying parts one at a time. That is exactly the trap the single-module pick in this list warns about.
The boards are made of polycarbonate and the surface carries a conformal coating. That coating is a thin protective layer that resists moisture, dust, and temperature swings, which matters in a fridge where the environment goes from cold to room temperature. The listing claims the conformal coating extends lifespan and improves circuit board reliability. It also covers Kenmore codes like 10641123210 and 10651729410, plus Whirlpool models like WRS322FDAB03 and WRS325FNAM01.
Here is the practical note the maker bolds twice. Turn off the fridge power, replace the main W10515058 first, then the two W10515057 boards, to avoid a short circuit. That sequence is what keeps the install clean. The 4.5+ star rating across 200+ ratings reflects a broad base of working three-light installs, and owners mention brightness and fit alongside function. The one thing to accept is that you are buying a set, so if only one light fails, you are paying for two spares.
Why the set saves you a second order: you get one ceiling board plus two rear-panel boards, so a series-wired fridge (where one dead light kills the whole string) gets fixed in one order. The conformal coating (a thin protective layer that seals out moisture) on the polycarbonate board is the durability detail that separates it.
The caveat: a set costs more than a single module, and if a single light is the only failure, you are buying spares you may not need right away.
Reach for the set: when your fridge runs three series-wired LEDs and you want to end the one-at-a-time replacement loop.
Not for you: if a single ceiling light is the only failure and you would rather buy just one module.
Know the Specs
Color Temperature in Kelvin
Color temperature measures how cool or warm the light looks, and 8000 Kelvin reads as bright, cool white. That brightness helps you see food pushed to the back of a shelf. A lower Kelvin number tends toward a warmer, yellower look. Match the temperature to the factory look you want to restore.
Series vs. Independent Wiring
In a series-wired fridge, all three LEDs sit on one electrical chain, so one failure kills the whole chain. That is why single-module fixes sometimes do not bring the light back. Check your fridge’s layout and wiring before you order. If you see three lights on one circuit, buy the set.
Mounting Type
Mounting type tells you where and how the module seats. Cabinet mount, panel mount, ceiling mount, and internal mount are physically different footprints. Order the wrong type and the module will not seat, even if the part number matches. Look at where the old module sits and match that type.
Wattage and Voltage
Wattage is how much power the board draws, and voltage is the electrical pressure it expects. One module here runs at 4.5 watts and 24 volts. Pair the module with your fridge’s electrical setup. Mismatched voltage is a real failure risk, so confirm the spec matches your model before install.
Common Questions
How do I find the right part number for my Whirlpool fridge light?
Why do all three fridge lights go out when only one is broken?
Is the plastic ring around the light the same as the LED module?
How long does a replacement fridge LED usually last?
Can I install a fridge LED module myself without a technician?
Do I need to turn off the fridge power before replacing the light?
Will a brighter LED module use more electricity?
What is the difference between the W11048980 and W11527432 modules?
Can I replace just the ceiling light or must I buy the whole set?
Is it worth buying a replacement module instead of calling a service technician?
The Bottom Line
Your best buy is the Upgraded W11048980, the whirlpool refrigerator led light module that gives you a cool 8000 Kelvin light (a very white, daylight-like glow) in a flush cabinet mount (it sits flat against the fridge wall) with a 10 year manufacturer warranty, and it holds a 4.5+ star rating across 150+ ratings. Want the higher-scored, shatter-resistant version? Grab the W11048980 Assembly. If your series-wired fridge went dark on all three lights, the three-light set ends the replacement loop in one order.
Match the part number before you buy anything else. That single step is what separates a five-minute fix from a second return trip, and every pick here publishes its cross-reference numbers so you can check fit first.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




