Workout Gloves Sizing Guide: How to Measure Your Hands for the Right Fit

A workout glove fits correctly when a snug tape around the knuckles, thumb left out, lands inside one brand’s published size range.

One glove that slips at the palm mid-set and another that pinches the knuckles usually came off the same shelf in the same “size.” The tape measure you need is in a kitchen drawer, and the measuring itself takes about a minute. What trips people up is everything after that: which part of the hand to wrap, how tight to pull, and why a medium in one brand behaves like a large in another.

Below is the measurement method the major glove makers agree on, the published size ranges to compare against, and the boundary cases where guessing costs you a return.

How Do You Measure Your Hand for Workout Gloves?

Wrap a soft tape snugly around the widest part of your hand, across the knuckles, and keep the thumb out of the loop. That single number — hand circumference — is the measurement every workout glove chart is built around.

Nike’s training-glove guidance says to wrap the tape snugly around the knuckles. LEKI describes the same idea slightly differently: tape tight around the widest part of the flat hand, just below the knuckles, thumb excluded. If you only have a piece of string, LEKI’s method works fine — wrap it, mark the length, then lay it against a ruler.

Three details decide whether your number is usable:

  • Snug, not loose. A slack tape adds length and pushes you up a size. Both Nike and LEKI call for a tight or snug wrap.
  • Thumb out. Including the thumb in the loop inflates the circumference and lands most people one size too big.
  • Measure both hands. Nike’s fit guidance says to measure both and size to the larger one. Your dominant hand is usually the bigger of the two.

Arc’teryx publishes a second method worth knowing if a chart asks for it: hand length, measured on an open hand from the middle-fingertip to the crease at the base of the palm. Some charts use circumference alone, some use both. Read which one your glove’s chart wants before you start.

Workout Glove Size Charts: What the Numbers Actually Mean

Published ranges differ by brand and by category, so the circumference you measured only means something against one specific chart.

Nike Training Gloves Men’s/Unisex Women’s
Small 6–7 in 6.5–7 in
Medium 7–7.5 in 7–7.5 in
Large 7.5–8 in 7.5–8.5 in
Extra Large 8–9 in —
Extra Small — 5–6.5 in
XS/S (extended) 8.5–9 in —
L/XL (extended) 10–10.5 in —

Two things jump out of that chart. First, the men’s and women’s ranges overlap heavily in the middle — a 7.25-inch hand sits in medium on both sides. Second, the women’s chart runs smaller at the bottom end and larger at the top end of large, so the gender designation on the package matters less than the range printed on that specific product page.

Other makers use metric. If your tape reads inches, multiply by 2.54 before comparing.

Once your size is pinned down, the shape of the glove starts to matter as much as the number — the tested women’s workout glove options worth comparing cover padding placement and wrist closure differences that a size chart can’t tell you. Nike’s full measurement walkthrough is also worth reading once at Nike’s glove sizing guide.

Why a Medium in One Brand Fits Like a Large in Another

Charts don’t transfer between brands, and often not between categories within the same brand, because construction and intended fit change. A lifting glove built for a tight, locked-in feel and a padded training glove built for cushioning can print the same circumference range and still feel a half size apart on your hand.

Nike publishes separate charts for training gloves, general gloves, and running gloves — with different numbers. That’s the same brand, a different line, and a different answer. Boxing, cycling, and winter gloves drift further still, since each is patterned for a different hand position.

So the rule is simple: find the chart on the exact product page you’re buying from, and match your circumference to it. Don’t carry a size over from your last pair.

What to Do at a Size Boundary

If your measurement lands on the line between two sizes — 7.5 inches, 8 inches, 21 cm — check the exact product’s chart rather than converting from another brand. Boundaries are where mismatches happen.

  • Between sizes in a lifting glove: size down if you want a locked-in grip; size up if padding at the palm or knuckles is thick.
  • Between sizes in a padded training glove: size up, since padding consumes interior room.
  • No chart listed: email the seller your circumference in both inches and centimeters before ordering.

The fit test once the gloves arrive is movement, not just measurement. A properly fitted glove lets your fingers move fully with no bunching at the palm and no pressure across the knuckles or wrist strap. Sizing charts are guidance tools, not injury-prevention guarantees — if a glove restricts your grip or cuts circulation, it’s the wrong size regardless of what the chart said.

Common Questions

Should I measure my dominant hand or both?

Measure both hands and use the larger measurement. Hands are rarely identical in size, and Nike’s own fit guidance recommends sizing to the bigger hand so the glove doesn’t bind on one side. If the two differ by more than half an inch, size to the larger and expect a slightly roomier fit on the other hand.

Can I just use a ruler instead of a soft tape?

A rigid ruler won’t follow the curve of your knuckles, so it tends to under-measure. Use a flexible tape if you have one. If not, wrap a piece of string or a strip of paper around your knuckles, mark where it meets, then lay that length flat against a ruler — the same method LEKI describes for its charts.

Do workout glove sizes match my winter or cycling glove size?

Not reliably. Glove charts are built around each category’s construction and intended fit, which is why Nike publishes separate ranges for training, general, and running gloves. Padding, wrist closures, and how tightly the glove is meant to sit all shift the numbers. Always re-measure against the chart for the specific type you’re buying.

Sources

Scroll to Top