Match welding amperage and duty cycle first, then size generator output by continuous watts, not peak watts, for the tools you plan to run at the same time.
Welder-generator shopping goes wrong at the same place nearly every time: the buyer picks by welding output alone and discovers the generator side can’t run the plasma cutter and the work lights together. The five specs below decide whether a unit fits, and the table further down lines them up in one place.
Welding Output And Process: What Must The Machine Do?
Start with the processes you actually run. Most engine-driven welders cover constant-current DC stick and TIG plus constant-voltage DC MIG and flux-cored, and a machine that skips one of those will leave you renting a second unit.
- CC/DC stick and TIG for pipeline, repair, and field fabrication work
- CV/DC MIG and flux-cored for sheet metal, structural work, and production welds
- Amperage range — the Miller Bobcat 230 3-Phase spans 20–230 A, which covers thin-gauge sheet up to heavy structural plate
Check the rated output, not the marketing headline. Miller rates the Bobcat 230 3-Phase at 230 A for CC/DC stick and 230 A for CV/DC MIG and flux-cored, and the Miller EnPak A60GBHW carries a 325 A multiprocess rating for buyers who need more headroom.
Duty Cycle: The Spec That Separates Real Output From Sales Copy
Duty cycle tells you how long the machine welds within a ten-minute window at a given amperage. Compare amperage, voltage, and duty cycle at the same operating point or you are comparing nothing.
The Bobcat 230 3-Phase is rated at 230 A and 29.2 V at 100% duty cycle for stick, and 230 A and 25.5 V at 100% for MIG and flux-cored. For long passes and production work, the higher duty cycle is worth more than a bigger peak number.
Generator Output: Continuous Watts For Everything Running At Once
Size the generator side by continuous wattage for the loads that run simultaneously, then add a margin. Peak wattage lasts seconds and won’t run a compressor. Miller’s power guide puts mid-size welder-generators in the 4,500–12,000 W range with 120/240-V AC output, which covers most field tools.
| Spec To Compare | What It Decides | Reference Point |
|---|---|---|
| Welding process | Which jobs the machine handles | CC/DC stick and TIG plus CV/DC MIG and FCAW |
| Rated amperage | Material thickness and electrode size | 20–230 A on the Bobcat 230 |
| Duty cycle at rated amps | How long you weld before a cool-down | 230 A at 100% duty cycle |
| Continuous generator watts | Tools running at the same time | 8,500 W continuous |
| Voltage and phase | Receptacle type and equipment match | 120/240-V single-phase; 480-V three-phase |
| Integrated functions | Whether you need a separate charger or compressor | 12/24-V 150-A battery charging on the EnPak A60GBHW |
| Engine and fuel | Run time and refueling stops | 23.5-hp air-cooled gas engine, 11-gallon tank |
| Weight | Truck bed, trailer, or hand carry | 385 lb on the Bobcat 230 |
Fuel, Weight, And Integrated Functions
Mobility and fuel decide whether the machine gets used.
Work out whether you need integrated functions before you buy. Buyers who only stick weld and run hand tools can skip that and put the money into duty cycle instead. If you would rather compare machines already sorted by these specs, this roundup of tested welder generators narrows the field fast.
Miller’s engine-driven generator power guide is the reference Miller publishes for matching output to load.
Grounding is not optional. Run a grounding cable from the machine’s ground stud to a metal ground rod for engine-driven equipment — the work lead is not the grounding lead. When the generator feeds a premises wiring system, ground it to the system earth ground; on a vehicle, bond the frame to the vehicle frame as the manual specifies. Stop the engine and disconnect input power before servicing, and use lockout/tagout where OSHA 29 CFR 1910.147 applies.
Sources
- Miller Electric. “Generator Power Guide” Output ranges and voltage for mid-size welder-generators.
- Miller Electric. “Bobcat 230 3-Phase” Amperage, duty cycle, wattage, engine, and weight ratings.
- Miller Electric. “EnPak A60GBHW Specifications” Multiprocess amperage, generator watts, and battery charging output.