Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your phone has a USB-C port but no wireless charging, you do not need a new handset — you need a small receiver sticker that plugs into that port and lets a charging pad do the work. The catch is that these adapters are tiny, cheap-feeling accessories sold with very little useful information, and the wrong one either blocks your fingerprint sensor, refuses to work through your case, or charges so slowly you give up. This guide sorts the real differences so you can pick the right one in a few minutes.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Some receivers are long strips that suit bigger phones, others are short patches that leave small phones’ sensors clear, and a few add fast-charging support that changes how often you plug in. The picks below cover that whole spread, so you can find the best Type C Wireless Charging Adapter for your own phone and case.
Top Picks



How To Choose The Best Type C Wireless Charging Adapter
Start with the port, not the price. Every receiver here uses a USB Type-C connector, but they do not all sit the same way on your phone’s back. A patch that lands over your fingerprint reader turns a convenience into a daily irritation, so measure roughly where your reader sits before you buy.
Long version or short version — the fingerprint question
A long version runs further up the phone’s back and suits larger handsets. A short version stays low and clear, and at least one short model here is explicitly described as not covering the fingerprint sensor on small phones like the Google Pixel and Pixel 2. If your reader is high on the back panel, the short shape is the safer bet.
Your case thickness decides whether the pad works
Wireless charging passes through plastic, not metal. One listing here warns against “any metallic or thick cases as the wireless signal can’t get through the metal,” and another recommends keeping your case under 3mm or sticking the receiver directly to the case instead. A thin shell is fine. A thick wallet case is not.
Understand the speed before you expect it
Most receivers here are listed at 1A or around 1A, which is a slow trickle compared with a cable. One model names 1300 milliamps and 10W fast charging appears on another. If overnight charging on your nightstand is the goal, that slow rate is fine. If you want a quick top-up before leaving the house, set your expectations to match the amperage printed in the specs.
Side-by-Side Comparison
| Model | Best For | Form Factor | Rated Current | Version / Shape | Amazon |
|---|---|---|---|---|---|
| Pissente Charging Receiver 2-Pack★ Best Overall | Two phones, one low outlay | Sticker | DC | Standard sticker | Amazon |
| Nillkin Magic Tag Type C (Short)Also Great | Small phones with a high fingerprint sensor | Compact plastic tag | 1 A | Short | Amazon |
| Nillkin Qi Receiver USB-C (Long)Crowd Favorite | Bigger handsets and Samsung A-series owners | Slim receiver patch | 1 A | Long | Amazon |
| Nillkin Magic Tag Type C (Pixel 2 XL) | Pixel XL and OnePlus owners | Plastic tag | 3 A | Type C standard | Amazon |
| Nillkin Type C Long (A13/A14/A15) | Samsung A13/A14/A15 and Pixel 3a XL | Compact plastic and metal | 1 A | Long | Amazon |
| MyMAX 1300mA Magic Tag | Buyers chasing the fastest charge rate | Metal and copper build | 1300 milliamps | Long | Amazon |
| SUNGOOYUE 10W Fast Receiver | Foldable-plug portability | Compact and portable, foldable plug | 2 A | Standard | Amazon |
| XYX Type C Qi Receiver | Widest listed phone compatibility | Patch | — | Standard patch | Amazon |
| Ejoyous Wireless Receiver 2-Pack | A spare receiver in the drawer | Sticker | — | Standard sticker | Amazon |
Detailed Reviews
1. Pissente Charging Receiver 2pcs
Two receivers in one box, so a second phone or a mistake costs you nothing extra.
The pitch is quantity. You get two sticker-style receivers with a USB Type-C connector, and the point of a two-pack in this category is simple: these stickers are small, adhesive-backed and easy to damage during install, so having a spare turns a frustrating afternoon into a minor inconvenience. The back is self-adhesive silicone, and the enclosure is silicone as well, which gives it a slightly grippier feel than the hard-plastic tags.
It is built for phones with a Type-C interface only, and the slim sticker is described as pocketable and space-saving on a desk or nightstand. There is no fast-charging claim and no amperage figure beyond a DC current listing, so set your speed expectation low. It is a no-frills way to get Qi charging onto a USB-C phone that lacks it.
Be clear about where this sits. The ratings are modest and there is very little owner feedback to lean on, so you are buying on the specification and the spare rather than on a proven track record. If you have one phone and care about how it performs long term, the Nillkin short version is the safer pick. If you have two handsets or you are outfitting a family drawer, this is the sensible way to do it.
Right call for: two phones at once, or a household that wants a spare receiver on hand.
Second thoughts if: you only have one phone — the thin review history gives you less to go on than the Nillkin picks.
2. Nillkin Magic Tag Type C Short Version
The short patch that adds wireless charging without parking itself on top of your fingerprint reader.
This one leads the list on fingerprint-sensor clearance, not specs. It is a compact plastic tag with a gold-plated plug rated at 1 A, and the short version is specifically shaped so it will not cover the fingerprint sensor on small phones like the Google Pixel, Pixel 2 and 3a. On a phone where the reader sits high on the back, that small bit of geometry is the difference between using the feature every day and ripping the sticker off in a week.
Compatibility is broad and clearly spelled out: Pixel 3a, 3a XL, 2, 2 XL, Nexus 6P, Galaxy A71 down through A30, OnePlus 7T Pro back to 3T, Xiaomi Redmi and Note models, LG V20 and G5, plus HTC, Huawei, OPPO and Nokia handsets with a USB-C port. The maker also points you toward a QC 2.0 or 3.0 fast-charge adapter for the best result, which is worth knowing because the receiver itself only asks for 1 A. Buyers report the wireless link connects reliably, and the low-profile tag slips under a normal case without a bulge.
The honest catch, and the one you should weigh first, is charging pace. Owners regularly describe it as slow, and a 1 A receiver is never going to match a cable. Treat this as a nightstand or desk-pad solution where the phone sits for hours, not a pre-Uber top-up. A minor second note: the slim tag is plastic, so peel it and re-seat it carefully rather than yanking the plug out sideways.
What earns it the top slot
- Short version keeps the fingerprint sensor uncovered on small phones like the Pixel and Pixel 3a
- Works with a huge list of USB-C handsets — Pixel, Galaxy A-series, OnePlus, Xiaomi, LG and more
- Gold-plated plug is described as scratch-resistant and fade-resistant
- Thin enough to live under a normal phone case
Where it asks patience
- 1 A rating means slow charging — fine overnight, frustrating when you are in a hurry
- Some cases block the signal, so a thick or metal-backed case is off the table
- Plastic tag rewards careful handling when you peel and re-stick it
Reach for this if: you have a small or mid-size USB-C phone and a fingerprint reader high on the back, and you charge on a pad overnight.
Look elsewhere if: you want speed — the gap between 1 A here and the 1300 milliamps on the MyMAX below is the whole story for a rushed charge.
3. Nillkin Qi Receiver USB C Long Version
The long-bodied receiver built for bigger Android handsets that need the reach.
Same idea, stretched. This is the long version of the Nillkin patch, and it is aimed at phones like the Galaxy Note 8 Pro, A50, A70, A10s, Huawei P30 and Xiaomi Note 8. Its spec sheet lists 1 A, a 5 volt input and a 100kHz frequency range, and the enclosure is plastic rather than a fabric or metal shell — that plastic is the point, because it is described as more waterproof and stain-resistant than an ordinary tag.
Where this pick separates itself from the short version above is build feedback. The most-praised thing about it is quality, described as a higher-grade plastic tag that resists wear, and value comes in second. Owners also note it sits nicely under a case. If your phone is a larger slab and the short patch feels like it leaves too much of the back unused, the long shape puts the coil where the pad expects it.
Two things to plan around. The listing is explicit that this is for USB-C phones only and will not work on iPads or other interface types, so check your port before ordering. And charging speed draws mixed verdicts — a 1 A receiver charges slowly by design, and there are reports of it cutting out after a couple of minutes on some pads. Pair it with a QC 2.0 or 3.0 adapter as the maker recommends, and keep your case thin.
Build that holds up: the plastic tag is pitched as more waterproof and stain-resistant than a basic sticker, at 1 A and 5 volts — a sensible daily-driver receiver for a bigger phone.
The fit note: USB-C only, no iPad support, and slow by nature; if you need quick top-ups this is not the tool.
Suits you if: you own a large-screen USB-C Android and want a receiver with a sturdier tag than the bargain two-packs.
Think twice if: your case is thick — the pairing guidance is a QC 2.0 or 3.0 adapter and a slim shell, not a wallet case.
4. Nillkin Magic Tag USB C Pixel 2 XL
Rated at 3 A — triple the amperage of the short and long Nillkin patches above.
On paper this is the most capable of the Nillkin trio. The spec sheet lists 3 A, where the short version and the long version both sit at 1 A. That is the number to note if the slow-charge complaints on other receivers worry you. The rest of the design is familiar: a gold-plated plug described as scratch-resistant and fade-resistant, the same wear-resistant plastic tag, and absorbing materials with heat, moisture and corrosion resistance built in.
It is aimed at Google Pixel XL and Pixel 2 XL, the Galaxy A71 through A30 family, Xiaomi Redmi and Note models, and OnePlus 6 through 8T. Owners describe installation as easy and credit it with switching wireless charging on for a phone that never had it, and the fit leaves room to spare on a Pixel XL. For a big handset with a pad on the desk, that combination covers the basics well.
The trade-off is that this is the oldest design in the lineup and the shape is the standard one, not the short cut. If your fingerprint reader sits high on a small phone, the short version at position one is the better geometry. And like every receiver here, it needs a non-metal, not-too-thick case for the pad to reach it.
The number that sells it: 3 A on the spec sheet against 1 A on its two siblings — the strongest current rating of any Nillkin receiver in this list.
Worth knowing: standard shape, so small phones with a high reader may prefer the short cut.
Pairs well with: a Pixel XL, Pixel 2 XL or OnePlus handset and a desk pad you leave the phone on.
Not the one for: a small phone where sensor clearance matters more than the amp figure.
5. Nillkin Wireless Charging Receiver Type C Long
A 0.16cm-thick receiver that slides under a case almost invisibly.
Thickness is the headline here. The listing puts it at 0.16cm, which matters because a case has to close over the receiver and still let the pad’s field reach it. The maker’s own guidance is to use a case under 3mm thick or stick the receiver straight onto the back of the case. It runs on a 5 volt input at 1 A, with a plastic-and-metal enclosure and a TI smart chip the company says reduces heat during charging.
Compatibility is pointed at the phones people actually still carry: Google Pixel 3a XL, Samsung Galaxy A13, A14, A15 and A42, and Moto G series. Functionality is what buyers like about it, and fit is a close second — it settles perfectly underneath a case. Heat is the least-loved topic in the feedback, so the low-heat chip claim is worth taking as a design intent rather than a promise.
Here is the plainest limitation on the whole list: this model is described as trickle-current charging for daily use and unable to do fast charging. The maker recommends a QC 3.0 or PD adapter for the best results, but the receiver itself is a 1 A part. If you charge overnight on a nightstand, that trickle rate is a fair trade. If you want speed, the MyMAX at position five is the faster pick.
Slimness wins: 0.16cm of plastic and metal at 5 volts and 1 A — the least intrusive receiver to put under a snug case.
The plain limit: explicitly a trickle charger that cannot fast charge, so plan it around a nightstand, not a lunch break.
Best match: a Galaxy A13, A14, A15, A42 or Pixel 3a XL owner who wants the flattest possible install.
Move on if: fast charging is a requirement — this one tells you outright it cannot do it.
6. MyMAX Type C 1300mA Long Version
The receiver that actually talks about speed, with a 1300 milliamp rating and a bigger copper coil.
Most of these adapters dodge the speed question. This one leans into it. It is rated at 1300 milliamps, and the maker claims a larger copper coil with a smart chipset delivers more than 73% charge efficiency — those are the company’s own figures, not an independent measurement, so treat them as a claim. The spec sheet also lists a 100-250 KHz frequency range and an enclosure built from ABS, copper and metal.
The design has two practical touches. First, a TI ferrite and intelligent charging IC that the maker says keeps the phone from overheating while charging, so the pad can sit on a nightstand without the handset getting uncomfortable. Second, the pitch about extending the life of your charging port by taking the cable out of daily rotation — a small thing until you have had a port wear loose. The compatibility list spans Pixel, Samsung, LG, OnePlus, Motorola, HTC, Nokia, Sony, Huawei, Meizu and ZTE USB-C phones.
The real caution is in how it behaves over time. The feedback swings widely: plenty of owners mention it works well, and some say it stops working after a day. That is not a pattern you can ignore, so treat this as a receiver with a shorter useful life than the Nillkin patches above, or buy prepared for a swap. At 1300 milliamps it will out-pace the 1 A models on speed while it is running.
Tech worth the attention
- 1300 milliamps — the highest current rating in this lineup
- Maker claims more than 73% charge efficiency from a larger copper coil plus smart chipset
- TI ferrite and intelligent charging IC aimed at cutting heat during a charge
- Long version covers a wide spread of USB-C Android phones
The risk to weigh
- Longevity reports split between working well and quitting after a day
- The efficiency and speed claims come from the maker, not independent testing
- Metal-and-copper body still needs a non-metal case for the pad to reach it
Choose it for: the speed figure — if 1300 milliamps matters more to you than long-term durability, this is the fastest-rated pick here.
Better to pass if: you want install-once-and-forget-it reliability, where the Nillkin short version is the calmer bet.
7. SUNGOOYUE 10W Fast Wireless Charging Receiver (5V/2A Type C)
A foldable plug and a 10W headline, in a body that tucks away flat.
Two things make this one different. The first is the plug: it folds, so the receiver packs flat into a bag or pocket instead of leaving a rigid tab sticking out to scratch whatever is beside it. The second is the 10W rating with a 5V/2A listing. It also carries a 3C safety certification, which is a certification named in the product data rather than an inference.
The internals are described as pure electric copper coils with fast conduction lines and repeated circuit optimization, aimed at keeping heat low during a charge. The maker also points out that the metal interface is less likely to break, which matters because a receiver’s real failure point is usually the plug joint where it bends in your pocket.
The weight of the feedback here is about reliability, and it is mixed rather than glowing: some units work well and last several months, others stop working after a while. Charging speed draws divided opinions too, and quality gets a mixed read. Nothing about it reads as a bad product — it reads as one where you accept a shorter service life in exchange for the folding plug and the 10W figure.
Pocket-friendly design: a folding plug plus 10W and 5V/2A in a compact body — the easiest of the group to carry loose in a bag.
Honest expectation: reliability feedback is genuinely split, so plan for months rather than years.
Good for: someone who moves the receiver between phones or bags and wants a plug that folds instead of snags.
Not for: anyone who wants one install and years of service — the reports here are mixed on how long it holds up.
8. XYX Type C Qi Wireless Charger Receiver Charging Adapter
The patch that names more specific phones than anything else here — if yours is on the list, it fits.
Where this one earns attention is the compatibility roster. It is spelled out phone by phone, across Samsung Galaxy A and F and M families, Motorola Moto E and G and P models, Google Pixel 4a through 6a, LG, Honor, OPPO, Xiaomi Redmi and more. If you are unsure whether a receiver will suit your exact handset, this is the listing most likely to answer the question in writing.
The build is a patch made from organic synthetic polymer materials, described as more resistant to wear, scratch and stain than a plain tag. The maker is also upfront about heat: the charging chip warms up while it works, the listing calls that an inevitable physical effect, and states there is no safety hazard to the phone or the chip. Few receiver listings state the heat behavior this plainly.
Then the reality check. This is the most-discussed receiver in the group and the discussion is not all kind — it gets solid marks for ease of use, with people noting it tucks neatly inside a phone case, but speed is the recurring complaint and value comes in for criticism too. There are also reports of it barely working or refusing to cooperate with a Galaxy A51 specifically. If your phone is an A51, check that thread before you buy.
Where it shines: a compatibility list long enough to cover most USB-C Androids, plus clear wording that the chip heating is normal and not a hazard.
The slow-charge reality: speed is the loudest gripe and a handful of handsets, the A51 among them, simply do not cooperate.
Best for: an owner of an unusual or older USB-C Android who wants to confirm fit from the listing before ordering.
Look past it if: charging speed is your priority — the complaints land squarely on pace.
9. Ejoyous Wireless Charging Receiver Type C 2PCS
A black two-pack of plain stickers for anyone who just wants Qi working, cheaply.
This is the plainest receiver in the list: two black silicone Type-C stickers, nothing more. Two self-adhesive silicone receivers with USB Type-C connectors, made for Android devices with a Type-C interface, in a black finish. The design goal is stated plainly: no tangled wires, no clutter on the desk or nightstand, and a receiver small enough to slip in a pocket or bag when you travel.
There is nothing here in the way of a fast-charging claim or a published amperage figure, so treat it as a basic Qi receiver and nothing more. The self-adhesive backing is the one part to handle gently — peel it slowly and set it in the right spot before pressing down, because repositioning an adhesive sticker is where most of these get ruined.
The honest position is that this is a backup purchase. There is very little owner feedback to judge it by, the brand is not one with a long track record in this niche, and you are buying two generic stickers rather than a refined product. That is fine if the goal is Qi charging on a spare phone. It is not the pick if you want one receiver to last.
What it does: two black silicone Type-C stickers for Android phones, aimed at a tidy, cable-free desk.
The limit: no fast-charge claim and almost no feedback to lean on — this is a spare, not a primary.
Buy it when: you want to test whether wireless charging suits your routine before committing to a better receiver.
Skip the experiment if: you already know you will use it daily — go straight to the Nillkin short version at the top.
Know the Specs
Amperage and milliamps (the charging pace)
Amperage is the amount of current the receiver can pass, and it is the clearest sign of how fast your phone will charge on a pad. Most receivers in this category list 1 A, which is a slow trickle meant for overnight charging. The MyMAX lists 1300 milliamps, a step up, and the SUNGOOYUE lists 2 A with a 10W rating. A higher figure is not a guarantee — the pad and your phone’s own limits still matter — but a 1 A receiver will always feel leisurely compared with a cable.
Long version vs short version (the fit question)
The long and short labels describe how far the receiver runs up your phone’s back. A long version reaches further and suits bigger handsets. A short version stays low so it does not land over the fingerprint sensor on a small phone. The Nillkin short version is specifically described as not covering the sensor on small phones like the Google Pixel and Pixel 2 and 3a. Get this wrong and you either block your reader or leave the receiver floating over your case’s camera bump.
Case thickness and metal (why the pad sometimes ignores you)
Wireless charging works through plastic, not metal. One listing warns outright against metallic or thick cases because the signal cannot pass through metal. Another recommends keeping your case under 3mm or attaching the receiver to the outside of the case instead. If your charging pad suddenly stops recognizing your phone, the case is the first thing to swap.
Heat during charging (what the makers actually say)
The charging chip warms up while it converts the pad’s field into current, and the XYX listing calls that an inevitable physical effect with no hazard to the phone or the chip. Several rivals add low-heat designs — a TI smart chip on the Nillkin 0.16cm model and on the MyMAX. Warm is normal. If your phone gets hot enough that you would not hold it, that is the moment to stop and check the pad.
Common Questions
Will a type C wireless charging receiver work with my Samsung Galaxy A phone?
Do these receivers charge through a phone case?
Why does my receiver get warm while charging?
Should I buy the long version or the short version?
Will these adapters fast charge my phone?
Can I use a wireless charging receiver on an iPad or a phone with a Lightning port?
Does the receiver block my phone’s fingerprint sensor?
How long do these wireless charging receivers last?
Can I use the receiver and still plug in a cable to charge?
The Bottom Line
For most people, the type c wireless charging adapter that gets the job done is the Nillkin Magic Tag short version, because its short shape keeps your fingerprint sensor clear and its compatibility list covers Pixel, Galaxy A-series, OnePlus, Xiaomi and LG handsets by name. If you have a bigger phone and want the sturdier tag, take the Nillkin long version. And if speed is the thing you refuse to give up, the MyMAX 1300mA is the fastest-rated receiver in this lineup — just go in knowing the durability reports are split.
One nudge worth making: the short Nillkin is the pick with the most consistent owner satisfaction behind it, and in a category this small and this prone to slow charging and case fit problems, buying the one people actually stick with is the way to avoid a drawer full of dead stickers.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





